Custom Fit 2005 Toyota Sienna Accessories

For the Edge CS2 Evolution Diesel Tuner you will need to enter the programming menu. You will turn on your vehicle without starting it. Then use the Menu button to open the main menu and scroll down with the arrow to the Programming on the screen.…

From end to end, the extendable arm measures 30-5/16 inches for the Kuat Pivot 2 Swing Away Hitch Extender for Bike Racks - 2" Hitches - Driver's Side #PVD20B.

Most of the time people want the pivot to swing out to the passenger side of the vehicle like what the part #PVP20B offers. This is because if you were for some reason on the side of the road and needed to get into the back of the vehicle you could…

Thank you for providing a photo of your trailer coupler. Trailers should always be level when hitched. If a trailer is out of level when towed it will tend to have more sway. I notice you have weight distribution (WD) lift brackets on your trailer…

If you have never used a brake controller before, the P2 #90885 will be easier to learn on and use than the P3, #90195 initially. The P3 has several features the P2 doesn't including the ability to change the LED screen color, change the…

The MaxxTow Adjustable Ball Mount part #MT70068 does come with a pretty long shank. But the only real thing at risk will be your shins. The added length does put a bit more leverage on the hitch, but it does not negatively affect the capacity of the…

As you may have already found, 5200 lb, 6000 lb and 7000 lb axles can all use the same components including inner/outer bearings, hubs and brakes. Here are some other things they share in common: Dexter 5200 lb Regular Duty Axle - 0.180 inch tube…

To install the AirLift 1000 Rear Helper Springs, part #AL60732, in your 2004 Toyota Sienna you will need to either jack up the rear of the vehicle or raise it on a hoist and support the vehicle frame with safety stands. This is necessary to allow the…

You can use Hopkins 4 Pole to 7 Pole Adapter #37185 to mate your 4-pole equipped vehicle to your 7-way equipped trailer. The extra wire leads do not have to be connected for your no-brakes application but you will have them in the event that you ever…

The part we offer as #37185 is actually sold by Hopkins as part #47185 so it's the same exact part. Your truck is prewired for a brake controller installation, but the wiring isn't ran all the way to the bumper. The wiring stops on the…

I would retap the threads with the next size up. Which from my research would be M12-1.5. If you are still unsure you can take the bolt you have with you to a hardware store, tell them you are in need of a tap that is the next size up, and they will…

The Curt Class III Trailer Hitch part #C13105 for the 2008 Toyota Sienna utilizes M12 bolts. It sounds like you have already tried to use a brush like part #814092 and Blaster Lubricant or WD-40. You can tap out the weldnuts with a M12x1.25mm tap…