Custom Fit 2004 Dodge Ram Pickup Accessories

Thanks for the pictures but no, the EX2700 tonneau cover that the #EX1700 fits is for a 2004-15 Nissan Titan 6' 7" Bed. The one previously mentioned #EX1770 is for your truck, so it'd for sure work if you have the 2770…

The Class V hitch we have for your 2004 Dodge Ram 2500 with the best ground clearance is the Curt hitch part #C15809. It doesn't tuck right under the rear bumper like what you can see in the attached picture but it does sit the highest.

You can add a 7-Way trailer connector and retain the use of a 4-Way as well by installing #37185. The 4-Way you have will plug into the 37185 and the remaining wires would have to be hardwired in. The white wire grounds to the truck frame. Black is…

In regards to HappiJac Truck-Mounted Camper Tie-Downs like part #LC182908-182928, the front tie-down installs inside the bed on the front panel directly behind the cab. The rear tie-down then mounts to the bumper. They will not require removal of…

The trailer hitch options we offer for a 2004 Dodge Ram 2500 are designed for models with the factory bumper. That said, the B&W Heavy-Duty Trailer Hitch Receiver part #BWHDRH25211 would be our best option as it does not actually tie into…

I spoke to Air Lift to confirm and the Replacement Wireless Remote AL73002 will work as a replacement for your 73001 remote. You will need 3-AAA Batteries #287-11407 that are not included to power on the new remote. Once you place the batteries…

The center hangers in the Tandem-Axle Trailer Hanger Kit #APT8 that you recently purchased are indeed longer. This is actually pretty common for tandem axle trailers. The reason for the extra length on the middle hanger is related to the shackle…

When you install the Lippert Components Center Point by Trailair Air-Ride Suspension Upgrade #LC1565391 you do have to use the included shackle straps that are longer than what you have now in order for everything to fit properly and have the…

The factory hitch of your 2006 Dodge Ram 1500 has to stay on to install and use the Curt hitch part #C15809 that you referenced. You will need to install the bolts back through the hitch so that you can install the Curt hitch. If you wanted to do…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

For your Air Lift WirelessAIR Compressor System #AL74000 you will simply need to remove the inline fuse and then wait at least 5 seconds before reinstalling the fuse. The manifold will then go into pairing mode for up to 5 minutes. Then press any…

The thickness of the tube is not any different as they are both 3 inch diameter, and the spindles are also the same utilizing the same inner diameter bearings, hubs, and seals. The difference in capacity is in the custom bend in the axle that…