Comparing Class III Trailer Hitches and Ground Clearance for a 2012 Toyota Sienna  

Question:

Expert Reply:

The Draw-Tite hitch # 75237and the Hidden Hitch, # 87698, share the same parent company so they have the same specs, design, and use the same instructions which are linked for you. Ground clearance measuring from the ground to the top of the receiver opening will be approximately 12 inches.

The Curt hitch, # C13105 is very similar in that it has the same specs and installs basically the same way, it is just designed a little different. It is the most popular choice for the 2012 Toyota Sienna. It has 12 inches from the ground to the top of the receiver opening. I have linked instructions for it.

I also recommend etrailer ball mount kit # EBMK4 which comes with a ball mount interchangeable ball set, a hitch pin and clip, and a carrying bag. For trailer wiring, use # 118498. I have linked instructions and a video for the wiring as well.

expert reply by: Michael H

0

Ocddoc

1/7/2013

Just had the Curt 13105 installed on my new 2013 Sienna Limited AWD. I like the look of it much better than the Draw-Tite and Hidden Hitch models. The Curt hitch is curved a bit on each endside, making it less noticeable than the others. It really hugs the bottom of the bumper: the receiver actually pushes a bit into the appearance plate on the underside of the car. Considering how low the rear of the vehicle is, the ground clearance of the hitch is excellent. Note that the Curt hitch does not have a mounting plate for a wiring harness. My wiring plug is mounted to the underside of the bumper for a factory look.

Patrick B.

1/10/2013

Thanks for the input! Glad to hear the hitch has worked out well for you. Happy Towing!