bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Draw-Tite

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Part Number: 24773
In Stock
$181.21
Retail:$268.03
You Save: $86.82
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" 1-1/4 Inch Hitch 24773
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Draw-Tite trailer hitch for your 2009 Mazda 5 are available from etrailer.com. Installation instructions and reviews for your Mazda trailer hitch. Expert service, and great trailer hitch prices. etrailer.com carries a complete line of Draw-Tite products. Order your Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number 24773 online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (109)
  • Q & A (0)
  • Photos

2009 Mazda 5 - Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

  • Class I
  • 1-1/4 Inch Hitch
  • 2000
  • Concealed Cross Tube
  • 200
  • Draw-Tite
  • Custom Fit Hitch

This fully welded, corrosion-resistant trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Drawbar and pin and clip sold separately


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



24773 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe

60841 Hidden Hitch Class 1 Trailer Hitch Receiver

Installation Details 24773 Installation instructions
Weight Carrying Capacity
Gross Towing Weight (GTW):
2,000 lbs.

Tongue Weight (TW):
200 lbs.


Weight Distribution Capacity
Hitch does not allow
use of weight distribution



No drilling required Manufacturer Estimated Installation Time

Tech Tip

No drilling through vehicle frame required for installation , Access holes may need to be enlarged by filing or rotary tool



California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.9

110 reviews
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

by:

I ordered a hidden hitch trailer hitch receiver and the wiring kit for the trailer lights for my Mazda 5 and was amazed at how easy they were to install. The videos that etrailer.com provides are invaluable and watching them answered all my questions. I will highly recommend etrailer.com to anybody who looking for anything trailer related.



by:

Great design. Very easy to install.



by:

Great fit, great price, fast installation,will order from again.



by:

Easy, fast and friendly. I am a repeat customer.



by:

Great hitch. Easy to install. Thanks for posting a how-to video, that helped.



by:

Great product, great price, installed easily.



by:

Package was delivered on time and hitch was easy to install....except for trying to drill the 1/2 inch holes....can't believe how hard it was to drill these holes.



by:

Installation on my Mazda5 was very straight forward. I agree with others, it took slightly longer than they directions estimated. It was also easier to drill the hole twice, enlarging it each time to the completed size.



by:
2010 Mazda 5

Easy to install, a little bit of hole enlargement and the hitch was easily installed.



by:

Quick delivery and easy installation. The hitch mounts very close to the car so it looks vary clean.



by:
2008 Mazda 5

Fast Delivery, Excellent Product, and the installation tool (wire snake) was amazingly effective! all for a good cost.



by:
2009 Mazda 5

Ordered trailer hitch and wiring set. Came in a timely fashion and was easy to install because of video on your site. I would highly recomend your services.



by:

As advertised, great price, quickly shipped, good packaging, and excellent how-to video on line. I cant wait to install tomorrow. Highly recommend buying from etrailer!



by:

easy to install, all you need is a drill, 1/2 inch drill bit (metal grade) and about 40 minutes of your time. the rest of the parts and detailed instructions are included. very easy project.



by:
2010 Mazda 5

Ordered the hitch and wiring harness Friday night, installed the hitch very easily the following Tuesday night. Drilling out the holes was the hardest part, I would recommend getting the 1/2 bit used in the instructional video on this website.



by:

Great product at a great price. The video they have loaded on their website made installation painless!



by:

The install was a breezeThey went the extra length to provide you with a slick wire feed for getting the mounting bolts into place. My only addition would be to make the holes a hair bigger than they mention, and the wrench sizes mentioned aren't correct.



by:

10 min install!!! Absolutely perfect. Of course I have all the right tools to enlarge the holes, but installation was easy. Follow the video.



by:

Hitch is very high quality, it was shipped super fast. Installation video is very useful. etrailer.com is definitely a company I would buy from again.



by:

EZ InstallI had no problems installing this. I used a grinder vs. a drill to enlarge the mounting holes. A drill bit can get stuck.



by:

Great fitThis hitch is just as advertised. The only thing that caught me by suprise was the weak looking bumper on my 5. This hitch is diffently a class I. I recommend!!



by:

Very easy to install. Took me awhile to figure it out, but when enlarging the existing holes, start off with a 3/8" drill bit first then onto the 1/2" drill bit. Believe me, it'll make the job a little easier.
After all is said and done, the hitch looks great.

After all is said and done, the hitch looks great." />


by:

This product is great and installation was a breeze. I would recommend making the hole slightly larger so that the fishing wire does not get stuck when pulling the bolt through. Great product highly recommend.



by:

Great Hitch For Great Price!The hitch fits so perfectly that without the Drawbar on it it is hardly noticible, Very easy to install! Its a black hitch on a black car so that helps, It ends up being the perfect height with raised drawbar to tow a Jet-Ski, Great Product. Would Recommend.



by:
2009 Mazda 5

It's scary how easy it was to install. The video was the key to the installation along with accompaning reviews. What a simple and unique idea on including videos on installation of a product. Finally and organization that utilizes the web to its fullest extent rather than just taking orders.


25
110
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • How To Carry 4 Bikes On A 2008 Mazda 5
    I do have a couple options for you but Class I hitches like the Draw-Tite Class I Sport Frame part # 24773 that fits the 2008 Mazda 5 are designed to only carry 2 bikes because of it's limited tongue weight rating. The weight of the bikes and bike rack is all considered tongue weight on the hitch and putting 4 bikes on a rack in a Class I hitch would create too much leverage and possibly damage the hitch or vehicle. With that being said, I recommend to get a 2 bike rack for the Class I...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Will Reese Multi-Fit Trailer Hitch 37042 Fit a 2012 or 2013 Dodge Grand Caravan
    Reese multi-fit trailer hitch 37042 will not fit the 2012 or 2013 Dodge Grand Caravan. The hitch was made obsolete 6 years ago in 2009 so they would not even be able to test the hitch since it has been out of production for so long. I have included a link to the trailer hitches that will fit either a 2012 or 2013 Dodge Grand Caravan for you.
    view full answer...
  • List of Vehicles Compatible with Reese Trailer Hitch 79008
    Yes, I will be happy to help. Reese trailer hitch 79008 was made obsolete on September 28, 2006. This hitch fits the following vehicles: 1988 - 1993 Pontiac, Grand Prix, Except GTP & Turbo w/Ground Effects 1989 - 1991 Buick, Regal, Grand Sport & Limited 1989 - 1990 Buick, Regal, Sedan (FWD) 1990 - 1994 Chevrolet, Lumina, All, Inc. Z-34 1991 - 1994 Buick, Regal, Coupe & Sedan 1992 - 1997 Oldsmobile, Cutlass Supreme, 4 Dr. FWD, Except Aero Sport Pkg 1994 - 1996 Pontiac, Grand Prix, Except...
    view full answer...
  • Draw Tite Trailer Hitch Recommendation for 2011 Toyota Sienna
    We have a Draw Tite hitch # 76112 that fits your 2011 Toyota Sienna and would be a really great option as it has plenty of towing capacity and is mostly hidden but the part number you mentioned does not fit your Sienna. I attached a picture of the hitch installed as well as a link to an install video for you to check out as well.
    view full answer...
    Image 1 for
  • Trailer Hitch Recommendation for a 1998 Dodge B3500 Van
    For your 1998 Dodge B3500 Van the most popular option we have is the Curt Hitch part # 13015 that has been confirmed as a fit. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not include a ball mount with the right...
    view full answer...
  • Recommended Hitch for a 2009 Mazda 5 Minivan
    Hey Sam! You are correct the Draw-Tite hitch item # 24773 does fit your 2009 Mazda 5 minivan. This is a class I hitch with a 1-1/4" receiver. It is custom fit and bolts to your Mazda with included hardware. I have linked an installation video below that will help you get this hitch set up. As far as your base plate question goes, I can only go off of the parts our vendors have listed that fit your Mazda 5. My information says that the 2009 Mazda 5 minivan can not be flat towed only dolly...
    view full answer...
  • Best Hitch Recommendation for a 2006 Toyota Tacoma
    All of the hitches we offer that are confirmed to fit your 2006 Toyota Tacoma with a regular cab would work great, but the hitch we offer that has the most positive reviews and is the most inexpensive is the Curt Hitch part # 13323. I would highly recommend it for you because of that. I attached an install video for you to check out as well. To wire your vehicle for towing, you would be able to use custom-fit Tow Ready wiring harness # 118496. To equip your Tacoma for towing a trailer,...
    view full answer...
  • Ball Mount and Trailer Hitch Recommendation for 2010 Mazda 5
    With Class I hitches you have to use the recommended ball mount for it otherwise the hitch warranty would be voided. So for the Draw Tite part # 24773 which is a fit for your 2010 Mazda 5 you would need the part # 3593 which is a confirmed fit and would work well. It has a rise of 2-1/8 inches and has to be used in the rise position. So this would get you very close to what you need and it doesn't void your warranty so it would be the best option. For a 2 inch ball you would want the...
    view full answer...
  • Is a Hitch With a 2 Inch Receiver Available for a 2010 Mazda 5?
    There are no hitches available for a 2010 Mazda 5 that have a 2 inch receiver. Each of the three available hitches, such as the Draw-Tite # 24773 have a 1-1/4 inch receiver and are Class I rated. The reason for this is that the Mazda 5 was not meant for towing or using anything but lightweight accessories which might necessitate a higher-rated hitch.
    view full answer...
  • Recommended Trailer Hitch Receiver for a 2004 Chevy Astro Cargo Van
    I did some research on 37042 that you referenced and its a Reese trailer hitch that worked with the Chevy Astro Extended Body 1990-2005. It's currently obsolete now. The Draw-Tite # 24773 you also have referenced will only fit 2006-2010 Mazda 5's so I wouldn't recommend this for your 2004 Chevy Astro Van. The most popular hitch we currently offer for your 2004 Astro Cargo Van is the Draw-Tite # 75122. It's a Class-III hitch and has a towing capacity of 5,000 pounds and tongue weight of...
    view full answer...
  • Reese Class 3 Hitch for 2001 to 2004 Ford Escape fitment on 2005 Escape
    No, the class 3 Reese hitch, product # 37042, will not work on a 2005 Ford Escape as the Escape model was changed for the 2005 model. If you have a 2005 or newer Ford Escape the Reese hitch that you bought will not work. I looked on our website and found a hitch that will work for your vehicle. I would recommend the Hidden Hitch Class 3 Round Tube Receiver Hitch, part # 87585. I recommend this hitch because it has a 2 inch receiver and is a Class 3 hitch. I have a link to the part...
    view full answer...
  • Hitch and Bike Rack Recommendation for a 2007 Mazda 5
    For carrying a bike rack for your 2007 Mazda 5 the hitch I would recommend is the Draw Tite part # 24773 as it has the same capacities as the Curt hitch but does not have the same stabilizer strap recommendation when carrying non-supported loads. I can assure you that the Draw Tite is just as sturdy and would handle it's tongue weight capacity just as well as the Curt. You need to keep in mind that since this is a Class I hitch you can't carry more than 2 bikes at a time since the additional...
    view full answer...
  • Will the Reese 37042 Fit a 2000 Dodge Grand Caravan?
    From what I could find out about the Reese 37042, it is a multi fit hitch. This means it should fit, but I do not know if there will be any trimming of the bumper, or how low it will sit once installed. That being said, we do have a custom fit hitch available for your 2000 Grand Caravan. The Draw-Tite # 75119 requires no trimming and will sit at 12 1/2 inches from the ground to the top of the receiver tube. I also included an install video we did with this hitch on a 2003 Grand Caravan...
    view full answer...
  • Trailer Hitch and Wiring for a 1998 Toyota T100 4X4 Pickup Truck
    Reese multi-fit trailer hitch 37042 was made obsolete on August 20, 2009. But when it was available it was not a fit for the 1998 Toyota T100 4x4. It did not fit any Toyota vehicles. We have one hitch that will fit your truck, Draw-Tite hitch # 75144. It requires that the truck has the OEM factory bumper for installation. It is a Class III hitch rated for 500 pounds tongue weight and 5,000 pounds gross trailer weight. To complete your towing set up I recommend etrailer ball mount kit...
    view full answer...
  • Trailer Hitch Recommendation for a 2002 Dodge Caravan
    We offer trailer hitches that would fit and work well on your 2002 Dodge Caravan, but since I do not know the part number of the hitch you are referring to or have access to the ad you mentioned I can't say for certain. For your vehicle we offer the Curt # C13362. This hitch would fit and work well for towing a small trailer. I attached an install video for you to check out as well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with...
    view full answer...
  • Trailer Hitch Availability for 2010 Mazda 5
    Both trailer hitches that we offer for your 2010 Mazda 5 are Class I hitches with a 1-1/4 inch receiver, but an adapter can be used to install a 2 inch hitch accessory. Between the two options I would go with the Draw-Title Sportframe Traile Hitch Receiver # 24773 as it has a slightly easier install process. I have linked an installation video for you to check out. If you need to adapt this 1-1/4 inch receiver to a 2 inch receiver, I recommend the Brophy Adapter 1-1/4 inch to 2 inch #...
    view full answer...
  • Hitch Recommendation for a 2002 Jeep Grand Cherokee
    The obsolete trailer hitch # 37042 did fit many vehicles, but it does not fit your 2002 Jeep Grand Cherokee. Instead you would want the Draw-Tite Trailer Hitch # 75139 as this has been confirmed to fit your vehicle and is a 2 inch hitch. Check out the install video I attached. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It...
    view full answer...
  • Trailer Hitch and Wiring for a 2004 Toyota Tacoma
    Hitch 37042 was a multi-fit hitch that was made obsolete in August, 2009, but it will not fit your 2004 Toyota Tacoma. But no worries because we have some hitch options that will fit your 2004 Toyota Tacoma. I have included a link to the options to the right. The most popular option is Curt hitch # 13013. I have linked a video showing installation for you. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with...
    view full answer...
  • Will the Curt Trailer Hitch Part C13563 Fit on a 2006 Nissan Quest
    The Class 3 Curt # C13563, and the one I recommend, is one of trailer hitches that fit your 2006 Nissan Quest. It has a maximum tongue weight of 300 pounds and 3,500 pound towing capacity. It's easy to install and no drilling is required. The custom wiring is the Tow Ready # 118469 and if you need a ball mount, I would get the ball mount kit # 989891 which includes 1-7/8 inch and 2-inch hitch balls, ball mount with 3/4 inch rise or 2-inch drop, pin and clip and a handy storage bag. The...
    view full answer...
  • What is the Difference Between the Draw-Tite and Hidden Hitch Available for a 2008 Mazda 5
    The two hitches we offer for the Mazda5 are very similar since designed for the same vehicle; quality wise they are very comparable too. The Hidden Hitch model comes with a drawbar and pin and clip where the Draw-Tite does not.
    view full answer...
  • Hitch Recommendation for a 2009 Dodge Ram
    From zooming in on the picture you submitted it looks like you have a Reese hitch part # 37042. The only information I could find on a hitch number 37042 is that it fits the Ford Escape. For a hitch designed to fit a 2009 Dodge Ram without factory hitch you would want the part # 13333.
    view full answer...
    Image 1 for
  • Will Old Reese Multi-Fit Trailer Hitch Fit a 2010 Toyota Sienna or is a Custom Hitch Required
    Reese trailer hitch 37042 is an obsolete multi-fit hitch that was designed to be able to fit numerous vehicles. However it will not fit your 2010 Toyota Sienna. Modifying the trailer hitch could result in weakening the hitch making in unsafe for use. For safety and the easiest installation you will want to install a custom fit trailer hitch. For your 2010 Toyota Sienna the most popular hitch is Curt trailer hitch # C13105. This is a Class III hitch with a 2 inch receiver. It is rated for...
    view full answer...
  • Recommended Trailer Hitch And Trailer Wiring For 2003 Chevrolet Venture
    We have a few options for trailer hitches for your 2003 Chevrolet Venture. The # 24773 is not designed as a fit for your vehicle. My recommendation for a trailer hitch is the Curt Trailer Hitch, part # 13344. This is a Class lll hitch and has a 2 inch receiver opening. I recommend this hitch because it is more versatile than the Class ll or Class l trailer hitches with a 1-1/4 inch receiver opening. You can attach many more accessories and the hitch has a higher weight capacity. I have...
    view full answer...
    Image 1 for
  • Why It Is Not Recommended to Carry More Than 2 Bikes with a Class 1 Hitch
    When you carry more than two bikes it becomes more an issue of leverage of the weight than it does overall weight. That third bike may not weigh much, but since that additional weight will be at such a far distance from the hitch pin hole that weight will apply a lot of leveraged torque on the Class I hitch that can not handle the force and could potentially damage hitch/frame of your vehicle. That is why if you install this Draw-Tite Sportframe Trailer Hitch Receiver # 24773 and plan...
    view full answer...


< Previous




Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Victoria B
Expert Research:
Victoria B
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Andrew K
Video by:
Andrew K
Employee Lindsey S
Written by:
Lindsey S
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Jenny M
Updated by:
Jenny M
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.


<