bing tracking image

SnowBear Proshovel Snowplow for 2" Hitches - Electric Actuator - 88" Wide x 26" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"

Part Numbers: SB324-140,31320

Our Price: $3,335.95
Snow Plow

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Videos

Need help with installation?
Locate installers near me



SnowBear Proshovel Snowplow for 2" Hitches - Electric Actuator - 88" Wide x 26" Tall
part number: SB324-140

Hitch-mounted snowplow makes short work of your snowy driveway or parking lot. Pivoting, 5-position blade glides over uneven ground. Long-lasting actuator with internal clutch lets you operate plow from your warm cab.

Features:

  • Hitch-mounted plow lets you clear parking lots and driveways with your vehicle
  • Plow sits close enough to vehicle to reduce leverage and strain on plow, mounts, and vehicle
  • Electric actuator raises and lowers plow smoothly and consistently
    • Internal clutch prevents damage caused by attempting to under- or overextend the actuator
    • Simple, chain-lifting design has fewer moving parts than a winch
  • In-cab toggle switch lets you raise and lower the plow from the comfort of your vehicle
    • Includes a wireless remote control as an alternative to the toggle switch
  • Adjustable, 5-position blade can be manually angled left, right, and straight ahead
    • Manual release handle is easily accessible from front or back of plow
  • Terrain-adjustable design for efficient plowing with less tripping
    • Rocking blade pivots up to 6" to allow maneuvering over uneven terrain
    • Trip springs and eyebolts are angled so blade rests on ground at correct angle
  • Sturdy steel edge scrapes over a variety of solid surfaces - not for gravel or sand
    • Poly scraper blade attachment (SB324-070 - sold separately) allows you to plow over grass or decorative pavement without worry of damage
  • Skid shoes let you adjust plow height to prevent blade from digging into the ground
  • Strong rubber deflector allows for better visibility by directing snow away from your windshield
  • Red visibility markers help you see plow edges so you can steer away from obstacles
  • Rugged and durable, all-steel construction
  • Black powder coat finish provides corrosion resistance
  • Simple installation
    • Slides into your vehicle's 2" front trailer hitch receiver
  • ISO certification ensures consistent, quality manufacturing
  • Assembly required
  • Made in Canada


Specs:

  • Application: 2" x 2" front-mounted trailer hitch receiver
  • Blade dimensions: 88" wide x 26" tall
  • Height adjustment: 9"
  • 5 Blade angles:
    • Left 11 degrees
    • Left 22 degrees
    • Straight ahead
    • Right 11 degrees
    • Right 22 degrees
  • Distance from bumper: 39"
  • Actuator lift capacity: 1,000 lbs
  • Weight: 390 lbs
  • 1-Year limited warranty


Note: Due to the size of this item it ships via truck freight.


The SnowBear Proshovel conveniently slides into your vehicle's front-mounted trailer hitch for easy, convenient mounting. Smoothly and easily raise and lower the plow from the comfort of your cab with the remote-controlled electric actuator. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain. Angled trip springs are also built in to help keep the blade from catching and tripping. Being just 39" away from the bumper, the Proshovel snowplow has a compact yet strong and sturdy design.


Simple, Hitch-Mounted Installation

HITCH MOUNTING

This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. Unlike a plow that attaches to custom-fit brackets, which ties you down to just 1 vehicle, this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.


To install the Proshovel snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver . Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.


How to Plow

Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, 11 degrees to the left or to the right, or 22 degrees to the left or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or private roadway where piling the snow straight ahead would create a barrier.


To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote or the in-cab toggle switch, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the Proshovel.


When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.


Smooth, Controlled Lifting with Electric Actuator

ACTUATOR

The electric actuator on this plow allows you to lift and lower the blade using a toggle switch that mounts in your cab. You can also use the included wireless remote control. To raise the plow, activate the actuator. As the actuator moves along the internal screw, the arm on top of the actuator will pivot, raising the plow blade by pulling the chain that is attached to it. Having fewer moving parts than a typical winch makes this setup less complicated and less likely to break down than other plow lifting and lowering devices. There is also an internal clutch system that prevents damage to the actuator should you try to raise the blade too high or lower it too low.


Add-On Accessories

SnowBear offers a plethora of helpful accessories to make plowing even safer and easier. Along with the available accessories to enhance your snowplowing experience, many parts of the SnowBear Proshovel snowplow are available separately, so you can replace worn-out pieces without having to replace the whole plow.


LIGHT KIT

The off-road halogen light kit (SB324-127) may be necessary if your plow blocks your vehicle's headlights. This kit will light up the way when you're plowing at night or in the early morning. The light kit mounts directly to your plow frame and offers increased visibility when plowing in dark conditions. The 2 bright halogen lights make it easier for you to see where you are going and for others to see you.


CASTER KIT

With the caster kit (SB324-126), it will be a breeze to move and store the Proshovel snowplow when it's not in use. These wheels mount directly behind the blade and they can be easily folded down for use and up for storage. In addition, these wheels will not weigh the plow down.


DROP KIT

The drop extension kit (SB324-128) allows you to use your SnowBear snowplow on your lifted vehicle. With 6" of drop, this bolt-on kit ensures that the plow makes proper contact with the ground. Its sturdy steel construction is just as strong and durable as the plow itself.


POLYBLADE

If you are worried about causing damage to your lawn or pathway, the poly scraper attachment (SB324-070) is perfect for replacing the harsh, steel scraper on the Proshovel. The polymer construction is strong enough to still help plow efficiently, but gentle enough to not hurt your lawn or pathway.



324-140 Snow Bear Pro Shovel Snow Plow for 2" Hitches - Electric Actuator - 88" Wide x 26" Tall



Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
part number: 31320

Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

Features:

  • Front-mount hitch provides attachment point for hitch-mounted accessories
    • Winch, spare tire carrier, snowplow, cargo carrier and more
    • No more blindly backing trailer in - just hook it up and drive it forward
  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over steel resists corrosion
  • Sturdy, square-tube design
  • Assembled in USA


Specs:

  • Line pull: 9,000 lbs
  • Vertical load: 500 lbs
  • Gross trailer weight: 5,000 lbs
  • Receiver opening: 2" x 2"
  • Pin hole diameter: 5/8"
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



31320 Curt Front-Mount Trailer Hitch Receiver





Customer Reviews

SnowBear Proshovel Snowplow for 2" Hitches - Electric Actuator - 88" Wide x 26" Tall - SB324-140

Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - 31320

Average Customer Rating:  4.8 out of 5 stars   (53 Customer Reviews)

Hitch-mounted snowplow makes short work of your snowy driveway or parking lot. Pivoting, 5-position blade glides over uneven ground. Long-lasting actuator with internal clutch lets you operate plow from your warm cab. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

by: Rickie J08/26/2017

It wasn't hard to install, instead of the wire I used two pen sized telescoping magnets to wriggle them in the square holed plates. My plans are to use this hitch in place of tow hooks. Good looks and sturdy!



by: Lynn08/08/2020

I didn’t know how much I would need this until I moved into my new house just yesterday. The garage door is much shorter at our new house, 7 foot vs. 9 feet. Using the front hitch and a 5 1/2 drop hitch, I have about two inches of clearance when putting my boat in our new garage. Without the front hitch I would have been able to get the boat in the garage. Not to mention how much more the trailer is to steering inputs, the garage is much narrower that our old one. If you have a tight spot to park something this will make your life much easier! Installation was simple and instructions well written. The tool to install the mounting bolts is a brilliant idea.

Lynn

8/9/2021

Better than expected. I didn’t need it when I first bought it, but we moved shortly after I installed the hitch. I left a 9 foot garage door on a detached garage. With a 5 in hitch my boat clears a 7 foot garage door. It will not low enough off the rear receiver.



by: Jason 10/11/2023

I am very happy with the product. Went on easy fit great. Looks very well made.



by: Graham S Graham05/28/2020

I like my front hitch.
Pros: easy to
moderate ease of install.
Comes with all the hardware.
I have tested it using a winch on the front to move a 62 Lincoln continental, No problems.

Con: My truck is a stock dodge 4x4. My point being is it is not raised, but higher than typical dodges. I had to buy a front hitch guard because the hitch kept hitting the concrete parking barriers when you park. So if you are going to drive off road, keep in mind this hitch may hit.

If I sold my truck I would want to pull this part off if there was a way to put it on a new truck.

Gary G.

5/29/2021

Works great, holds the winch in place and allows me to pull out cars or trees from easier to reach positions.



by: Ken S04/26/2017
2006DodgeRam Pickup

Easy ordering, quick delivery, relatively simple installation. Took a couple of hours from start to finish and worked perfectly to back my camper/trailer into a tight space.

Ken S.

4/29/2018

Still loving it George, thanks for asking! Recommend it to all who ask about it.



by: Steven 11/11/2022

It’s a excellent hitch ,Website was easy to order and hitch came in early pkg. of hitch was very good
Hitch fit perfectly
And appreciate the updates on delivery and after delivery follow up
Will def. Be using this company again



by: Todd02/23/2018

Having a front trailer hitch on my truck is great. Now I can pull my camper with the rear hitch & put my bicycle carrier on the front hitch. Have not tried moving my boat or camper with the front hitch yet, but I know it will be great for putting either one in to a tight spot.



by: Gary C11/11/2013

The service I received from etrailer was outstanding; the customer service rep that helped me with my order was super friendly and very helpful with all my questions and concerns and processed my order on the spot. I had my shipping confirmation right after I placed my order and received my hitch in 2 days from start of my order... The only issue I had was from the maker of the hitch I purchased, the wire they give you to fish the bolts was too short from my access point on the frame of the truck but with a little extension added on the wire given to me allowed me to installed the hitch with no problems... etrailer in my book is A+++ and I will buy all my truck and hitch needs from this awesome internet store.. Thank You again etrailer for a super smooth transaction with my purchase.



by: Jared 06/17/2023
2003 DodgeRam Pickup

Received the item a day before it was scheduled for delivery. Package well and was a good price!
Thanks,
Jared



by: Michael R03/27/2020

Front hitch was fairly easy to install. Instructions easy to follow only complaint was wire for fishing bolts thru frame broke while pulling 2nd bolt thru. Had to make one from wire I had. Hitch works great for my needs.



by: nate macallister03/20/2014

we hooked it up today thursday march 20 2014. the hitch was very easy to install. we then hooked up a receiver with a winch mounted to it. we then hook the cable from winch to a tree to test the trailer hitch and the winch and receiver all at once it all worked great.can't wait to test it all out four wheeling. my friends will see it soon and they all want the same hook up.



by: Morris R05/04/2013
2004 DodgeRam Pickup

Great company to deal with and the hitch fits perfect as did the last one I bought from etrailer.I mounted this front hitch on my 2004 Dodge Ram 4X4 and it didn't requirer cutting out the center of the spoiler.took about 35 minutes.Delivery was very fast and I am completely satisfied.



by: Darrell08/05/2016
2007 Dodge Ram-Pickup

Received my hitch promptly and installation went fairly easy The only problem I had was that the fish wire tool was to short for the front two holes on both sides. I was able to attach a coat hanger to it to extend the reach and complete the job
The video was very helpful in positioning the hitch
All and all I am very pleased with this hitch.



by: James03/18/2013
2006DodgeRam Pickup

I had ordered a similar hitch from Amazon weeks before receiving it damaged three different times. Three is a charm and I started searching elsewhere when I found you guy's, etrailer.com. The product arrived undamaged. Though I've not installed it yet I believe it will be a whole lot easier due to the wonderful installation video you sent me. I will tell you the video was a selling point for me. Thank you for the great service, product and the video.
Jimmy Lane



by: Mike W.09/09/2012
2004 DodgeRam Pickup

Very high quality. Very easy to install. Does not take away any ground clearance. On the 2004 Ram, no drilling and no cutting fascia. I will use mine mainly for carrying bicycles while towing our travel trailer.



by: Rick V.09/24/2012
2004 DodgeRam Pickup

Item is perfect...I installed it by myself in about 45 minutes on my 2004 Dodge Ram...No need to drill holes as they are already there, and didn't need to trim the air dam below :O)...the fish wire was great!!! easier to fish the bolt etc from the mounting holes straight up through the frame than trying to go all the way to the access hole though...



by: stan carlson09/24/2017

i recieved it in a very short shipping time, it was correct hitch,easy installation. great public relations with e trailer. highly recomend this co. and product. thanks



by: marc j04/07/2014
DodgeRam Pickup

Hitch fit my dodge ram perfect... no drilling and all the hardware came with it. Only took 20 minutes by myself to mount.. great product... thx



by: Rick11/09/2018

The product is great. Unfortunately, one came with my snowsport plow, so I have an extra. I was able to easily install.



by: John F11/24/2019

One of the best hitches on the market after 1 year of use still looks like new . I'm am planing on buying another truck and I will be buying from you again. Thank you for such a great product.



by: Chris zip 2071506/04/2013
2005 DodgeRam Pickup

Received the hitch very quickly. Installed it in ~45 minutes. Exact fit on my 2005 RAM 1500.

Chris 2.

6/4/2014

Doing fine. No complaints.



by: Keith03/05/2018

Like most everything we’ve bought here this worked well and was a good value.

The installation was only similar to the instructions but worked out well in about and hour start to finish. The wire to snake the bolts into place is clever.



by: Christopher02/27/2022

Great hitch and makes positioning my travel trailer on a long and narrow driveway so easier!



by: Tom M.05/01/2015

product was good only one problem the fish wire was to short had to attach wire fishing leader to make it work. THANK GOD FOR BLUE FISH



by: David 08/25/2021

Easy install and have a luggage/cooler on a rack full time.


25
53
Show More Reviews

Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?


  • Height of Front Hitch Receiver for SnowBear SnowPlow
  • The SnowBear Proshovel Snowplow for 2" Hitches - Electric Actuator - 88" Wide x 26" Tall item # SB324-140 needs to be mounted 9"-10" above the ground. There is an extension kit if your Ford F-250 is lifted or sits to high. It is the Drop Extension Kit for SnowBear Snowplows - Bolt On - 3" Drop item # SB324-128. This bolt-on kit ensures that the plow makes proper contact with the ground. Its sturdy steel construction is just as strong and durable as the plow itself.
    view full answer...

  • SnowBear Proshovel Snowplow # SB324-140 Shipping Weight and Number of Boxes
  • The SnowBear Proshovel Snowplow for 2" Hitches # SB324-140 has a shipping weight of 390 lbs. We drop ship this product from the manufacturer and it comes in 3 boxes that are between 75 and 150 lbs each. My contact couldn't give me a specific on individual box weights. It comes with 3 boxes on 1 skid but does not require a forklift as the 3 boxes can be individually lifted separately if desired.
    view full answer...

  • Snowplow that Fits a Front Mount Hitch Receiver on a 2017 Ford F-150
  • For your 2017 Ford F-150 I recommend the SnowBear Proshovel plow, # SB324-140. This plow fits into a 2 inch hitch receiver. It has an electric actuator to raise and lower the plow from inside the truck cab so you won't have to get in and out of the truck to raise and lower the plow. It also comes with a wireless remote which you can use instead of the toggle switch if you want. This plow also has 5 plow angles and 9 inches of vertical adjustment. The plow weighs 390 pounds so make sure
    view full answer...

  • Can Curt Front Mount Hitch Receiver Be Installed Upside Down?
  • The Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 31320 is not designed to be installed upside down. The hitch may or may not need to be modified for that, but the frame would required drilling for that and the warranty from the manufacturer would not cover that use as it hasn't been tested for load under that use. I can't recommend it.
    view full answer...

  • Replacement Mounting Hardware Recommendation for Curt Front Hitch
  • Yes, we offer replacement hitch install hardware with the part # RHK. You'd simply need to enter the part number of the hitch you have (31320) and then select Curt as the manufacturer and we'd ship you out the correct hardware.
    view full answer...

  • Front Mounted Trailer Hitch Receiver Fit on 2006 Dodge Ram 1500
  • There is a front-mounted trailer hitch receiver that fits a 2006 Dodge Ram 1500, though the correct one will simply depend on the cab that you have and the model. I will list out the fits so you can find exactly what you need for your truck. - 2006 Dodge Ram 1500 Mega Cab: Curt Front Mount Trailer Hitch Receiver # C31017 - 2006 Dodge Ram 1500 Quad Cab and Regular Cab (excluding Sport models): Curt Front Mount Trailer Hitch Receiver # 31320 I have added links below to the installation
    view full answer...

  • Front Mount Tow Hitch Receiver for a 2004 Dodge Ram 1500 that Does Not Require Fascia Trimming
  • Curt front mount hitch # 31320 is a confirmed fit for your 2004 Dodge Ram 1500. There is no trimming indicated in the instructions, linked to the right, for a 2004 model, just 2006 and later models. I have included a link to a video showing installation on a 2006 model so you can ignore any trimming parts. Everything else should be exactly the same on your 2004.
    view full answer...

  • Front Mount Trailer Hitch Receiver for a 2008 Dodge Ram 3500 Mega Cab
  • We do have a couple of possible options for front mount hitches for your 2008 Dodge Ram 3500 Mega Cab. You can use # 65046. There is some minor drilling required, see instructions, but you will likely not have to do any trimming. I have included a link to the instructions to the right. I have also linked a video showing installation. The other option is # C31017. It will NOT fit Laramie models though. The same drilling and possible trimming applies to this hitch as well since it installs
    view full answer...

  • Recommended Front Mount Hitch for a 2002 Dodge Ram 1500
  • I do have front mount trailer hitch options for a 2002 Dodge Ram 1500 like the Curt Front Mount Trailer Hitch Receiver part # 31320 which is what I recommend but none of them mount inside the front bumper like you see on the earlier models. The reduction in ground clearance is very minimal but there is not a workaround for this. For a winch mount, the Bulldog Winch Hitch Mounted Winch Mounting Plate with Handles part # BDW20011 is what I recommend.
    view full answer...

  • Is the Curt Front Mount Trailer Hitch Compatible with Westin E-Series Bull Bar on a 2008 Dodge Ram
  • It is sometimes possible to have both a Bull Bar and a front mount trailer hitch installed at the same time on a vehicle. The problem is that in the majority of vehicles, both parts require at least some of the same mounting locations so they would interfere with one another. What you will need to do is take a look at the isntructions for the front mount hitch that I have linked to see where it mounts and compare that to the mounting locations used by the Bull Bar to determine compatibility.
    view full answer...

  • Is Front Mount Trailer Hitch for 2007 Dodge Ram Pickup Available That Extends Through Front Bumper
  • We offer one front-mounted trailer hitch for your 2007 Ram 1500. It is the Curt, part # 31320. The installation for this hitch does not go through the bumper as you requested. It does mount with the receiver opening below the bumper. Per the instructions the front fascia or air dam may need to be trimmed to allow clearance for the hitch. I am not aware of any front trailer hitches that install through the bumper as you mentioned.
    view full answer...

  • Installing Curt Front Mounted Receiver # 31320 on 2006 Dodge 2500 4x4
  • I spoke with my contact in the engineering department at Curt Manufacturing, who tells me that most, but not all 2006 Ram 2500 models had the access hole in the frame as shown in the instructions. If the front of the frame member allows enough room to pull the bolt and spacer through, you can go that route. Otherwise, you can use a 1-1/4 inch hole saw to make an access hole in the frame as shown in the instructions. I have linked you to the installation instructions as well as to an
    view full answer...

  • Front Mount Trailer Hitch Recommendation for a 2008 Dodge Ram 1500
  • The Curt Front Hitch part # 31320 that you referenced has been confirmed as a fit for your 2008 Dodge Ram 1500 so I would recommend it for you. The 2006 Ram in the attached video is the same generation as yours so the install will be the same.
    view full answer...

  • Front-Mount Hitch Installation Process on 2004 Dodge Ram 1500 Pickup
  • We offer two brands of 2-inch front-mount hitch for your 2004 Dodge Ram 1500 and both can be seen using the link provided. Curt # 31320 and Draw-Tite # 65033 share a square tube design, 500-lb vertical pull and 9000-lb line pull capacities and no-drilling installation. Neither hitch will require fascia trimming on your Ram 1500; this is required only for the Curt hitch when installed on 2006 and later model years. Both products' instructions are linked as are a video for the Curt hitch
    view full answer...

  • Recommended Front Mount Hitch For A 2006 Dodge Ram 3500 4x4
  • The front mount hitches we have available for your 2006 Dodge Ram 3500 (Curt # C31017 and Draw-Tite # 65046) will both mount under the bumper, which I have examples of in an included picture. With that said, we do not have an option that will mount up at the tow hooks, unfortunately. Both of these hitches are rated to 9,000 pounds of line pull, but the Draw-Tite # 65046 is rated to 500 of tongue/vertical load, which will be higher than the Curt's 350 pound capacity. Between the two,
    view full answer...

  • Front Hitch That Fits 2008 Dodge Ram 1500
  • Yes we do have front hitches that fit your 2008 Dodge Ram 1500. We have the part # 31320 which fits regular and quad cab models and the # C31017 which fits the mega cab models.
    view full answer...

  • Is Drilling Required to Install Curt Front Mount Trailer Hitch # 31320 on a 2008 Dodge Ram
  • According to the installation instructions for Curt Front Mount Hitch, # 31320, which I have linked for you to view, on 2006 and later models, there will be some drilling required to install the hitch. This hitch will fit the 2008 Dodge Ram, excluding the Mega Cab models.
    view full answer...

  • Which Front Mount Hitch Offers the Most Ground Clearance on a 2004 Dodge Ram 1500
  • They currently only make two custom fit front hitches for your 2004 Dodge Ram 1500. You can choose from either the Curt Front Mount Trailer Hitch Receiver part # 31320 or the Draw-Tite Front Mount Trailer Hitch Receiver part # 65033. Out of these two options the Curt Trailer Hitch hang down the least as you can see in the attached photo. Unfortunately, both of the above trailer hitches are made for customers who still have the lower valance which is the reason they sit the way they do.
    view full answer...

  • Recommended Front Mount Trailer Hitch For 2006 Dodge 1500 Ram Laramie Pickup Truck
  • The front hitch you mentioned is the Curt, part # 31320. This hitch has a 2-inch receiver opening and has a 5,000-lb gross trailer weight capacity. Per the installation instructions the fascia needs to be trimmed on 2006 and later trucks. If you plan on using the hitch for a winch I recommend a winch mount like part # C31010. The mounting plate measures 13-inches x 8-1/4 inches. To help deter theft of any accessories you put in the hitch I recommend a locking hitch pin like part
    view full answer...

  • Front Hitch Recommendation for 2003 Dodge Ram 1500 for SnowSport Plow
  • Snowsport used to test their plows with the Curt front hitches which they'd recommend highly with their kits. So for your 2003 Dodge Ram 1500 the Curt front hitch # 31320 would be your best choice.
    view full answer...

  • Is Drilling Safe for Installing Curt Front Hitch on 2007 Dodge Ram 1500
  • The Curt hitch part # 31320 attaches to the frame of your 2007 Dodge Ram 1500. The frame of a vehicle would not be a "crumple zone" and this hitch has been tested on your vehicle to be safe. The front end part of a vehicle that is designed to crumple in accidents is the bumper not the frame.
    view full answer...

  • Width and Bolt Hole Spacing Side to Side for Curt Front Mount Receiver 31320
  • I went out to the warehouse to measure Curt front mount receiver # 31320 for you. The overall width is 35-5/8 inches. The bolt holes side to side are space 33-3/4 inches apart on center. The side brackets where the bolt holes are on the hitch are 2-1/4 inches wide.
    view full answer...

  • Front-Mount Hitch Receiver for Use on 2004 Dodge Ram 2500 Pickup
  • The Curt Front Mount Trailer Hitch Receiver # 31320 that you referenced is a fit for the Ram 1500 but not the 2500 series. We do offer two options in a front-mount 2-inch hitch for your 2500 that can be seen on the link provided. Both the Draw-Tite # 65046 and the Curt # C31017 will require some trimming of the front air dam as well as some drilling. There is not currently a no-drill/no-trim hitch option for your truck. You might care to refer to the two linked articles and the install
    view full answer...

Info for these parts were:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Written by:
Lindsey S
Employee Joshua S
Video Edited:
Joshua S
Employee Nicholas E
Test Fit:
Nicholas E
Employee Jared G
Test Fit:
Jared G
Employee Chris R
Video by:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Dodge Ram Pickup Accessories