Detail K2 Summit II Snowplow - 88" Wide x 26" Tall
Custom Mounting Brackets for Detail K2 Snowplows - Standard

Detail K2 Summit II Snowplow - 88" Wide x 26" Tall
part number: K2SUMM8826

Residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. 3-Position blade pushes snow straight ahead, right, or left. Remote-controlled electric winch lets you raise and lower plow from your cab.

Features:

• Heavy-duty, adjustable steel snowplow lets you clear paved and gravel parking lots and driveways with your vehicle
  • Custom-fit mounting brackets attach plow to the front of your truck or SUV
• Hardened steel edge breaks up packed snow and ice
• Skid shoes let you adjust plow height to scrape over gravel and uneven surfaces
• Electric winch raises and lowers plow with sturdy, nylon strap
  • Operate from the comfort of your vehicle with the in-cab switch or the included wireless remote control
• Adjustable, 3-position blade can be manually angled left, right, and straight ahead
• Strong rubber deflector on top directs snow down and away from your windshield
• Shock-absorbing springs let plow tip forward on impact to protect you and your vehicle
  • Can extend life of the plow if you hit an obstruction
• Red visibility markers help you see plow edges so you can steer away from obstacles
• Flip-down caster wheels allow you to roll the plow where you need it for mounting or storage
  • Wheel height is adjustable to match your vehicle height
• Plow handle with knob lets you easily move plow up and down during mounting
• Safety chain holds plow in raised position during travel
• Cross member allows you to quickly attach and remove the snowplow
• Reinforced, all steel construction has black, rust- and UV-resistant powder coat finish
• ISO certified

Specs:

• Blade dimensions: 88" wide x 26" tall
• Weight: 296 lbs
• Winch lift capacity: 1,500 lbs
• 3 Blade angles:
  • Left 45 degrees
  • Straight ahead
  • Right 45 degrees
• 1-Year limited warranty

Note: Due to the size of this item, it ships via truck freight and only to the contiguous United States.

SUMM8826 Detail K2 Summit Series II Custom-Mount Snowplow - 88" Wide x 26" Tall Blade

Custom Mounting Brackets for Detail K2 Snowplows - Standard
part number: K283007

These brackets provide the necessary attachment points for Detail K2 Rampage II, Storm II, and Summit II snowplows. Designed to fit close to your vehicle without protruding out beyond the bumper.

Features:

• Custom-fit mounting brackets allow you to quickly attach and remove your Detail K2 snowplow
  • Fits Rampage II (K2RAMP8219), Storm II (K2STOR8422), and Summit II (K2SUMM8826) plows
• 2-Point brackets are designed to fit close to your vehicle without protruding beyond bumper
• Bolt-on installation to your vehicle's frame
  • Allows good ground clearance to avoid curbs
• Reinforced, black powder coated steel resists corrosion
• Driver's-side bracket, passenger's-side bracket, and hardware included

83007 Custom Mounting Brackets for Detail K2 Snowplows

Customer Reviews

Detail K2 Summit II Snowplow - 88" Wide x 26" Tall - K2SUMM8826

Custom Mounting Brackets for Detail K2 Snowplows - Standard - K283007

Average Customer Rating:  5.0 out of 5 stars   (2 Customer Reviews)

Order: RelevanceNewestRating - High to LowRating - Low to High Residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. 3-Position blade pushes snow straight ahead, right, or left. Remote-controlled electric winch lets you raise and lower plow from your cab. These brackets provide the necessary attachment points for Detail K2 Rampage II, Storm II, and Summit II snowplows. Designed to fit close to your vehicle without protruding out beyond the bumper.

by: Micah01/22/2020

Great plow, easy to use and reasonably priced. However, do not go with the DK2 plow lights. Nobody seems to know what wire harness kit you need for your truck and DK2 will not help you. Thank goodness the rest of the plow is quality or you probably wouldn't get an answer from them just like they never returned multiple emails or calls regarding a wire harness for their plow light attachments. I like the plow but cannot back the company for lack of supporting their products and consumers.739975

by: Gary01/14/2022

2000 Jeep Wrangler

I love my Summit II Plow. I have it on a 2000 Jeep Wrangler. I was unsure if my Jeep could handle this size plow, but it handles it very well. With my Jeep I can plow my driveway easier than a pickup with the short vehicle/wheelbase turning and maneuvering in small places. Installation was pretty easy with the custom mounting brackets. The only problem I had was the shoes being too short. I replaced them with Item # 3371303002 at etrailer and they work fine. I live in Minnesota where we get plenty of snow and this sure beats plowing with an ATV which I used before I bought this plow.1243711

2

2

Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?

• Testing Wires of 2004 Dodge Ram for Wiring In Brake Controller
  
• We don't have the exact color functions for your brake controller wiring but we can help you determine that as long as you have a circuit tester like the part # PTW2993. You'd need to test the wires and the one with voltage all the time goes to the black wire of your brake controller. The one with voltage only when the brake pedal goes to the red wire. Ground the tester to the constant 12-volt power wire, then probe the remaining two wires.  The wire that lights the tester will be the
  view full answer...


• Snow Plow Solution for 1995 Toyota 4Runner
  
• .
  view full answer...


• What is Max Height From Ground Bumper Can Be To Fit Detail K2 Storm II Plow
  
• I checked with Detail K2 and they told me that as long as your truck does not have a lift kit on it the bracket kit part # K285120 will put the brackets at the correct height to use the Detail K2 Storm II Snowplow # K2SUMM8826 that you also referenced. In general they said they said that as long as the distance from the bottom of the bumper to the ground is less than 19 inches you should be fine.
  view full answer...


• Will Detail K2 Summit II Snowplow # K2SUMM8826 Fit Lifted 1996 Chevy Tahoe 4WD
  
• In order to install the Detail K2 Summit II Snowplow # K2SUMM8826 on your 1996 Chevy Tahoe 4WD you will just need the Custom Mounting Bracket Kit # K283005. As long as your particular lift kit doesn't actually interfere with the frame locations that the brackets attach to the lift won't be an issue at all. The K2 Snowplow can be raised and lowered to account for the altered height of your Tahoe.
  view full answer...


• Snow Plow Kit for 2005 Toyota RAV4
  
• While we don't have front hitches that fit either of your vehicles we do have a plow setup for the 2005 Toyota RAV4 that uses frame brackets instead of a hitch for attachment. For that you'd want the Detail K2 Summit II plow part # K2SUMM8826 and the install kit # K285200 and you'd be set.
  view full answer...


• Difference Between Detail K2 Summit II and Storm II Snowplows
  
• The only difference between the Detail K2 Summit II Snowplow # K2SUMM8826 and the Detail K2 Storm II Snowplow # K2STOR8422 is the actual size of the snowplow. The Summit II is 88" Wide x 26" Tall while the Storm II is 84" Wide x 22" Tall. If the vehicle you plan on using the plow with is the 1989 Jeep YJ you input for your vehicle info then the mounting brackets you need for either of the plows mentioned above come in the Kit # K284115. Let me know if you have a different vehicle and
  view full answer...


• Mount Kit to Install Detail K2 Rampage II Snowplow on 1990 Ford F-250
  
• The mount kit you need to use the Detail K2 Summit II Snowplow # K2SUMM8826 on your 1990 Ford F-250 is the part # K281516 which is a custom fit for your truck's frame designed for mounting this plow.
  view full answer...


• Which is Better for Snow Plow Mount on Vehicle Front Hitch or Frame Brackets
  
• I would recommend going with a snow plow for your 2016 Jeep Wrangler Unlimited that uses frame brackets to attach to the vehicle instead of a front hitch. The brackets are a bit more secure and less likely to fail than a hitch. I say that because we've tested a couple of the hitch mounted options and they ripped the front hitch off of a Highlander twice... So the Detail K2 Rampage II part # K2SUMM8826 that you referenced is a really great option that all you'd need to install on your
  view full answer...


• Replacement Cutting Edge Recommendation for Detail K2 Storm II Snowplow # K2STOR8422
  
• I checked with K2 and the correct cutting edge you need is the part # KSSB84N for your Detail K2 Storm II Snowplow # K2SUMM8826.
  view full answer...


• Finding Shop to Help Assembly Detail K2 Snow Plow
  
• I wish we had a dealer locator or a way to find a shop in your area, but best option would be to find a local mechanic or garage with a good reputation and see if they'd be interested in assembling the Detail K2 Avalanche Snowplow # K2SUMM8826. If none of the shops will take the job you might ask if any of their mechanics would be interested in sidework (if they allow that). I attached a link to the install instructions as well as a link to a review video for you to check out as well.
  view full answer...


• Recommended Snowplow For 2003 GMC Yukon XL With Front Mount Trailer Hitch
  
• The installation of the K2 snow plows, part # K2RAMP8219, and part # K283007 would require using the mounting holes for your front mount hitch on your 2003 Yukon, so I would not recommend them but I do have another option. I recommend the SnowBear Personal Snowplow for 2" Hitches, part # SB324-081. This plow slides into the 2 inch front mount receiver on your Yukon and features a remote control that lets you raise and lower the plow from the comfort of your truck cab. This features
  view full answer...


• Does The Custom Mounting Bracket For My 2000 GMC Sierra Come With The Detail K2 Storm II Snowplow
  
• Yes it does. If you get the following items, Detail K2 Storm II Snowplow - 84" Wide x 22" Tall, part # K2STOR8422, and the Custom Mounting Brackets for Detail K2 Snowplows, part # K283007, you will get the K2 Storm II Snowplow and the mounting bracket in one package. I have included the product description of the snowplow below. ,
  view full answer...


• Will Detail K2 Custom Mounting Bracket Kit K283007 Fit FirstTrax Snowplow
  
• Detail K2 Custom Mounting Bracket kit # K283007 is a confirmed fit on your 2001 GMC Sierra 1500 LD and it works with their Rampage II # K2RAMP8219, Storm II # K2STOR8422 and Summit II # K2SUMM8826 plow models. My contact at K2 said the mount will work on the FirstTrax Prosumer model plow.
  view full answer...