Product Specs:
Trailer Lights
Tail Lights
Stop/Turn/Tail
Red
6-7/16L x 2-5/16W Inch
LED Light
Oval
Recessed Mount
Submersible Lights
Optronics
6-7/16" x 2-5/16". 3-Function, waterproof light acts as brake, tail, and turn light. GloLight lens creates a solid panel of light. Recessed mount with grommet (sold separately). Accepts industry-standard 3-prong plug.
Video of GloLight LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 22 Diodes - Oval - Clear Lens
Average Customer Rating: 4.8 out of 5 stars (1322 Customer Reviews)
6-7/16" x 2-5/16". 3-Function, waterproof light acts as brake, tail, and turn light. GloLight lens creates a solid panel of light. Recessed mount with grommet (sold separately). Accepts industry-standard 3-prong plug.
I really like these lights. I use them for my rear lighting and rear side marker/turn signals. I went out of the way to use these on my trailer which involved reinforcing the frame since I had to cut a large piece out to install them. Well worth it. They are bright and have a distinctive look.
the lights are exactly what we wanted and needed
Replaced existing incandescent lights in an enclosed trailer. These LED’s are an excellent replacement, are highly visible, and good looking.
Just got my Optronics glolight tail lights.(Thanks etrailer and George J.) They look awesome installed, very unique setup. If you want the best service and price, you must go with etrailer.com!!
These lights look and work great! They installed directly in place of the non-LED lights that were on the truck. In my case they are the tail, turn and brake light mounted on the rear post of a 1 ton dump truck.
Thomas D.
5/20/2017
These lights are great! Theyre still working like new and are very bright ! If that wasnt good enough E-Trailer Service is the best! Thanks
I mounted these vertically for an extra set of tail lights on my 14' utility trailer. I'm a firm believer in good visibility by others when towing. Very pleased with them.
William
3/11/2022
I dont use this trailer often, but the lights are still performing well. Good purchase and I continue to recommend them.
This side marker clearance light will be installed on a trailer I am building. The lens cover snaps off for access to the two mounting holes located on the base of the fixture. Once you know that the lens cover comes off, it is easy to determine how to mount this fixture.
I have a trailer project that will end up becoming a teardrop camper. I like the way this tail light looks.
The lights came in record time. There LED trailer lights are exactley what I ordered. They work great and look great
Delivered and accurate ordered was filled properly.Packaged a little sloppy and plastic was slightly scuffed.
Much better than the older led units that the trailer came with. Would highly recommend.
These have a nice look and was a great upgrade for my snowmobile trailer.
As always the employees at etrailer answered all my questions and even offered a better solution to my issue that was less money. everything arrived on time and as promised. it is a pleasure doing business with them
got them yesterday exactly what I ordered and work great will be doing buisness again
order came wed everything ok am having it put on Friday . thank you
Great looking light love it. Easy ordering and fast thankyou
Looks great
EVERYTHING WENT PERFECT! THANK YOU SO M UCH!
Customers compare STL111RCB to these similar products
VS
Product Specs:
Trailer Lights
Tail Lights
Stop/Turn/Tail
Red
6-1/2L x 2W Inch
LED Light
Oval
Surface Mount
Submersible Lights
Optronics
7-9/16" x 3-5/16" Oval. 3-Function, waterproof LED light acts as brake, tail, and turn signal. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. 3-Wire design.
Video of Optronics LED Trailer Tail Light - Stop, Turn, Tail - Submersible - 10 Diode - Oval - Red Lens
Average Customer Rating: 4.8 out of 5 stars (672 Customer Reviews)
7-9/16" x 3-5/16" Oval. 3-Function, waterproof LED light acts as brake, tail, and turn signal. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. 3-Wire design.This product was a perfect replacement for OEM. Installation was simple. Ordering process and delivery by eTrailer was spot on. I will definitely continue to utilize eTrailer for my future trailer repair and upgrade projects.
After figuring out what wires were what on my trailer and the lights everything works as it should.
Donald
2/17/2024
After a year everything is still working as it should.
Very nice product. Installation on my very old utility trailer was easy. I like the slim design compared with my old chunky incandescent lights which were easy to break and not as bright as these LEDs.
Easy install looks great on my trailer without needing to cut the oblong holes for the light. Only need to drill a small hole for the wires and the mounting screws.
Great product and OEM replacement on my Sundowner 777 gooseneck horse trailer
The 10-diode tail lights were well made, bright, and easy to install. We also ordered and installed the matching reflector rings, which were also easy to install, look great, and give added safety features.
Kathryn
10/14/2022
Lights are sleek and a perfect replacement. Still doing an excellent jodb! Would purchase again if needed.
After a year of use they still work great, and all the bulbs are still lighting up.
Direct replacement on my Circle J horse trailer.
Was exactly what I needed: Surface mount, holes exactly 7 inches apart for the sides. Needed it for a replacement on our 2018 Grand Design 399TH Momentum.
Great value, good communication and fast shipping. Highly recommend trailer!
Perfectly replaced the factory ones on my skeeter trailer.
After one of the the incandescent trilights the factory installed on my trailer burnt out I discovered they where sealed and the bulbs could not be replaced,
So I purchased two of these and discovered they are ery nice lights and unlike incandescent lights they don't screw up the turn signal flash rate.
I am now in the process of rebuilding a trailer mounted generator and just ordered 2 more of them for that trailer and I also bought LED marker lights from the same manufacturer.
If you need new or replacement taillights or marker lights LED's are the way to go, long lasting, nice and bright and in my opinion they way they instantly light up get more attention from drivers behind me possibly reducing the chances of getting my trailer rear ended by a inattentive driver.
Now that I'm finishing up on my Teardrop Trailer I've got these lights installed, along with a LED tag holder, and LED marker lights. I had also bought the fenders from etrailer they look great, and I get a lot of comments how good all these parts look. Oh and the prices are better then any place I could find.......Thanks etrailer
I bought one of theses lights last year to replace one that had some of the LED's going out. Same manufacturer and same part number. The new light uses a different type of LED (square LED). The old style used an LED that looks more like a small bulb. I have 4 of these on the back of my 5th wheel trailer. The other three started going bad so I just replaced them as well. I have other LED lights inside the trailer that use the same type of LED as the new tail lights. I've had those lights for 6 years with no problems. . I suspect these new lights will last much longer with the new type of LED.
Super easy to install. Took me about 30 minutes to do both lights. Good & bright. Much better than the factory installed tail lights. Very pleased!
Good product. Horizontal bolt hole spacing is the same as a license plate so it conveniently mounts anywhere a license plate would. The LEDs are bright enough as auxiliary running/turn/brake lights and the wiring is simple. The mounting flange is not very strong plastic so you have to be careful not to crank down on the mounting bolts. There is no hardware included and no gasket for the backside, which is a bummer. Otherwise, a very nice product.
Wired them in and they light up, blink, and do everything else they're supposed to do. Let me also mention that they are BRIGHT at night. Loading the boat onto the trailer at dusk/after dark they're almost blinding when the pickup driver steps on the brakes. Lol
I had a hitch carrier in the garage and wanted to add brake lights/turn signals. Since there were no mounting locations for lights, I needed a surface mount option. These fit the bill. They work great and were easy to wire with the harness I bought.
These are worth the price, look good and are very bright. I've had a few of the center LEDs go out but 10/10 would order again.
After one year, the Optronics LED Trailer Lights are still working as expected with zero issues!
These were bought to replace the original LED lights which had failed. The Optronics LED Trailer lights were a direct match to the originals and installation was simple.
Overall, very satisfied with the product and would purchase again!
Worked great as a replacement for OEM that was no longer available for RV. I also replaced the back side marker lights so the front and back matched.
Pat C did a great job in completing my order with substitution for out of stock resistor.
still working!
Quality product well made and designed,
Reasonably priced. Best suited for my application. Also purchased the red reflector snap ring that covers the mounting flange and screws.
fit like a glove!!! thank you!
Fast delivery and packaged with care. Thank you! Will definitely be ordering again.
Customers compare STL78RB to these similar products
Dan W.
3/10/2019
Coudnt be happier with my lights and service from Etrailer. Best ever!!!