Product Specs:
Boat Trailer Parts
Winch Stand
Roller Bracket
Galvanized Steel
13-3/16 Inch Tall
CE Smith
Keep your boat's bow away from your winch and in line with it while you are trailering. The bracket accepts any 3" to 4" bow roller or Y-stop. 11-Gauge pre-galvanized steel can be painted to match your trailer.
Video of CE Smith Bow Roller Bracket for Winch Stands - Pre-Galvanized Steel - 13-3/16" Tall - Bolt On
Average Customer Rating: 4.7 out of 5 stars (212 Customer Reviews)
Keep your boat's bow away from your winch and in line with it while you are trailering. The bracket accepts any 3" to 4" bow roller or Y-stop. 11-Gauge pre-galvanized steel can be painted to match your trailer.Sturdy and easy install. Perfect replacement for my bent bracket
Work prefect, the size is great for crank handle,and is strong
Bracket is what I thought it would be. Very well made and easy to mount.
This is the first time to refurbish a boat trailer. Your website was very easy to search. I found exactly what I was looking for, ordered it, and I think two days later I had received it. And it worked on my trailer like I thought it would. It does not get any better than that.
Great for PWCs and fishing boats but probably a bit lightweight for larger boats. Works well on my Sea Doo trailer. I was going to make my own, but for what I could buy the material for, I was able to buy two of these. Bottom line, I'd buy these again for what I'm using them for.
I have a very small bow stop on a 22' ocean going cruiser I just purchased and needed a more substantial bow stop, I found just what I needed and I am very pleased with the results.
This is a terrible product. Cheaply made and too narrow to fit over any normal winch. Too late to return, so going in the trash.
Good quality and durable
It fit my trailer perfectly. Now my boat sits 6 inches back further on the trailer so that my transducers do not get damaged.
Thank you - Doug R.
This piece was exactly what I needed to replace my old worn out piece. Great quality!
Worked perfect with new winch I purchas ed
Exactly what I needed
Exactly what I was expecting. It arrived 2 days early as well.
Perfect, just what we needed. Easily installed and super fast shipping! Thanks!
I have a 35+ plus year old shorelander boat trailer. I had recently purchased a 12 foot tracker flat bottom Jon boat. The problem I had was trying to fit my new tracker flat front boat to my old bow stop. My old bow stop is V shaped. I found a bow stop from etrailer for flat front Jon boats but it did not fit the bracket on my old trailer. I did a little research on this site and found the perfect solution. The solution was a wider mounting bracket to hold the new bow stop. The bow stop is a Yates 3 inch wide. My old bow stop was a Yates 2 inch V. The bracket is very universal for older trailers. etrailer is the only company I could find that offered this product. The prices are great and the shipping is good. I have also purchased new axle mounting plates and leaf spring bushings from here for the same trailer and they fit like a glove. The axle mounting plates and bushings are made by the same people as the bow stop bracket which is CE Smith. Thank you etrailer! I will be a continued customer!
This bracket worked out perfectly for my installation. I mounted it below the winch for two reasons: it is too narrow for the winch I already had, and the bow stop needed to be positioned below the winch attachment point on the boat (the front boat handle).
Kenneth
1/26/2018
All working well, thanks.
High quality and exactly what we were looking for.
I bought this bow roller mounting bracket to replace an older bracket that did not fit my new set-up. The new bracket fits perfectly. It was delivered well ahead of the projected delivery date.
Bill G.
2/17/2019
The bracket seems to be working fine. No problems
Whish ce smith would have made it a little bit more durable. I bought thus one so I had a spare because it gets bent fairly easy
A good quality item arrived in timely fashion and is doing exactly what it is supposed to, supporting the bow of my boat from the winch post
Geoffrey
6/27/2022
Awesome 100
had to replace rusted bunk brackets...these fit perfectly...the u bolts were a tad wider in width and bigger than the holes on the trailer so had to modify the holes to accomodate the u bolts...everything worked fine albeit took a little more time
My trailer came without a bow roller. The parts I ordered were just what I needed to add that to my trailer. Fast delivery and good price. Web site was good also.
Patrick L.
3/18/2020
Great
The bow stopper bracket was an exact replica of the 20 yr old broken one on my Hustler jon boat trailer. Standard shipping got me the part in only 2 days. Sweet. Might add a 2x4 to the center for strength to handle occassional boat imact when motoring onto the trailer. This is a great site to find difficult to locate trailer parts.
This bow roller bracket is sturdier than I thought it would be. The edges are a little rough, but nothing I can't take care of to keep the costs down. It also fits the the 4" Bow roller well along with the shaft and end caps. Outstanding service and turnaround.
Customers compare CE31005PG to these similar products
VS
Product Specs:
Boat Trailer Parts
Rollers
Keel Roller
4 Inch Long
Black Rubber
11-1/2 Inch Tall
CE Smith
This roller assembly attaches to your 2" wide trailer tongue and supports your boat's keel for easy loading and safe transport on your trailer. It features a 4" rubber spool roller, galvanized steel brackets and all mounting hardware.
Video of CE Smith Keel Roller Assembly for 2" Wide Trailer Tongues - Galvanized Steel and Black Rubber
Average Customer Rating: 4.8 out of 5 stars (71 Customer Reviews)
This roller assembly attaches to your 2" wide trailer tongue and supports your boat's keel for easy loading and safe transport on your trailer. It features a 4" rubber spool roller, galvanized steel brackets and all mounting hardware.Great products as usual. USPS is slower than other carriers though.
I used this on a small trailer for my kayak to support the front end. Fit was perfect. Pleased with the purchase.
Neal
9/7/2023
One year later I have no problems at all. Works great.
Mike L.
10/29/2023
Great product. Minor point is that these don't appear to be galvanized bolts. Also, this fits perfectly on a two inch beam, but an extension to the beam that I need to put it on is slightly wider (to fit around the two inch beam). It would be nice if they had made the bolts a little longer to cover both original beam and extender but since I'm replacing with galvanized, it doesn't matter. Remote area so delivery was delayed but no problem since I could easily track it and see where it got held up. etrailer shipping was great.
Price was fair and the delivery came a day earlier than estimated by etrailer.
Have yet to travel with it but it goes on slick, confident it will perform. Solidly built assembly.
Excellent products and shipping was exactly in time.
As advertised, installed quick and easy, and performs as expected: a quality product at a reasonable price. I'll be ordering from etrailer.com again!
Hs
8/12/2016
Quality product works as claimed.
The manufacturer decision to have end caps on roller bolt is a mistake. The roller rod fall off after a short trip, I had go buy a five inch bolt and nylon locking nut to secure the roller. Thank goodness I did not lose the rubber roller.
exact fit,good quality hassle free shopping.etrailer is my favorite online retailer for boating,camping,bicycle,kayak and truck accesories and racks
Easy to install, looks like it will wor k!
Great experience ordering from etrailer. High quality product, fair price and excellent customer service. Great communication from time order placed and after the product delivered. Look forward to doing business with etrailer again. Keep up the great work.
As always, and easy, pleasurable shopping experience with etrailer! Not only do they ship out quickly and send you exactly what you ordered, but their customer service and follow up is unmatched!
Brought two of these for my portable trailer I made for my Porta-bote. One for the trailer tongue and one as a bow stop. Works great. Excellent product.
Exactly what I needed. I have been looking for the correct part to fit my trailer without having to modify it.
Ronnie C.
8/13/2017
Works great
Perfect, just perfect! My use for the product is on a pickup bed extender so that I can roll a pretty heavy kayak into my truck more easily. A simple bolt-on solution that works great.
Ordered a few times now from etrailer.com. Very pleased with the fast shipping and quality of the products. I love that they have info videos on the product and even
how to install ...... Thank you.
etrailer is the best i tell everyone about you. all trailer parts ordered for my boat trailer work great !
Great service, good & informative website, the folks at CE Smith treat you like a good neighbor.
Product was received in good condition and was exactly what I ordered. No hick-ups or other issues. Quality of the product was good as expected. I would have no issues with ordering from this company again.
great product for a home made trailer i built. easy to install. holds a 14 foot boat in center to help load
Used once worked as hoped.service fine. simple.
fast shipping great product
etrailer had my part in stock ... for a 1994 boat trailer. Simple to order and fast delivery.
They were very prompt in their delivery and very friendly. If you need trailer parts for repair or upkeep give them a shout.
Good quality product and was as described and pictured. etrailer shipped fast to.
Customers compare CE32005G to these similar products
Chad P.
8/7/2018
Still working great after a year! Theres no rust or deflection in the bracket. Sure was a lot easier than making my own!