Arrives before Christmas 
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Secure your fifth-wheel trailer hitch to standard base rails with this bent-pin-style lock. Just replace one of the pins on your hitch with the 1/2" diameter lock for added security. Chrome plating resists corrosion.
Features:
Specs:
Note: Does not work with Reese universal base rails RP30035.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to review part number TR63254. This is a Tow Ready Base Rail Lock for fifth-wheel trailer hitches. It's a 1/2 inch diameter pin right here. This bent pin-style lock will secure your fifth-wheel trailer hitch to the standard base rails in your truck bed. You'll use this in place of the pin and clip on one of the hitch legs of your fifth wheel. This is a steel pin which is very strong and durable. It has a nice chrome-plated finish which will help resist rust.
It has this plastic snap-on cap right here and that cap will cover this key slot to help prevent any corrosion from getting into the locking mechanism. It does come with the two keys. They are included. Basically what you would do is go ahead and put the key in there and turn it and this will pop out and when that pops out, you can remove the lock end from the pin itself and actually you can take the key out because then when you go to install it, you can just push it on and then when you push that down, it would lock it into place. You don't need the key to lock it down. I'm going to give you a few specs on this. The overall length, which is from this end to the very end here, this is going to be right at 7-1/2 inches.
Now the inside length, which is going to be the measurement here to where the bend starts, this is going to be right at 3-1/2 inches. And again, the pin diameter on this is 1/2 inch. Now what I'm going to do is we're going to take this off and I'm actually going to install it. As we go back here, I have an example of a fifth-wheel leg right here. This is on the rails already and then you can see it has the pin and clip already on there. What I'm going to do is go ahead and pull the clip to pull that pin out and then what I'm going to do is take this bent pin.
I'm going to slide it through where that pin and clip was and again, take the key out and then I'm just going to put this lock on the end, push it. That locks it into place. You can put the cover on it and you can see that this would lock into placed. All you really need is one of these on here. You could do all four if you want but actually one would work fine and keep anybody from removing the fifth-wheel hitch from your rails themselves. Just to remove it, open that cover, put the key in there, turn it until it pops out and then you can take that off and you're ready to go. Simple installation as that, but that should do it on a review on part number TR63254, the Tow Ready Base Rail Lock for fifth-wheel trailer hitches. .
Fits great!
Thia was my third order from etrailer and as as always great people to work with and fast shipping.
When I put this lock in the base rail was in the way so I had to grind part of the lock off. Nothing bad but it just won't fit without doing that.
One lock used to lock 5th wheel hitch to industry standard rails.
One lock used to lock Industry Standard Rails to pickup truck frame.
Both locks worked perfectly. I now have THREE locks on my expensive 5th wheel hitch to really slow down any evil doers. They would be making a hell of a racket trying to get my hitch. Thanks. Great locks, fair price, super service, keyed alike. Thank so much!
Fit perfectly, always great quality, great prices ,fast shipping .
Thank you
Etrailer
Gerard S.
4/6/2018
Excellent
The fifth wheel rail lock fits perfect. Also it arrived just as promised!
I bought a Reese 5th-wheel hitch, universal mounting assembly & wire harness from these guys - shipping was timely, products were everything I expected, they answered all my questions right away. I'm very happy with their service and they provide a wealth of information on all aspects of towing. I would not hesitate to recommend them to anyone needing trailer gear and expertise. Top-notch company.
John H.
10/23/2017
I appreciate your follow up Laura. When I need any major RV accessory you guys are where I find it. Nice to know there are still people out there who know what customer service means.Thanks. J
5th wheel base pin lock, arrived on time, was what I wanted. Would recommend and will buy products from them again.
Mike
1/6/2018
Working great still using it. Also purchased a Reese airborne pin box from you guys. Just took a 5800 mile trip and it was worth every penny. Thanks for the follow up. Have a great day!
Highly recommend! After having lost my 5th wheel hitch of 20 years to someone who must have needed it more than I did. I'd get another one for where ever they fit.
I originally thought this would fit my anderson hitch on the base rails to lock it in. The length of the pins were not long enough so it would not work for my application. I found nothing wrong with the locking pin other than it wont work, it would be nice to find a pin that fits thru the holes of the base rails on the anderson application so I can lock it in place when not towing the fifth wheel, I will keep looking.
Just what I needed to lock the head of the 5th wheel hitch to the base
William K.
7/22/2021
Great Lock
Doesn’t fit in the rails for my fifth wheel hitch. Has been laying on my desk for a year.
Jenny N.
5/25/2022
I reached out to Reese and found that if you have the 30035 rails from Reese then this lock would not be a fit. You can use part RP58093 which will allow you to lock the pin to the rail with a padlock.
Being a retired police officer, theft was always a concern. Purchasing the two locks have given us a peace of mind. 1/2" was very difficult to find, so we appreciate etailer for having them.
I tried to use this to secure my ProSeries 16k fifth wheel hitch to the bedrails and the lock would not slide onto the pin enough to attach. The lock was hitting the bed rail no matter what I tried. So it was not a good fit for this use.
This fifth wheel locking pin is a great idea! It installs easily as shown in the video. They are inexpensive enough that I bought two and installed them on diagonally opposite corners. That way, No one can lift one end, or side, of the hitch and break off the tab that is locked under the rail. It would only take five minutes, or less, to pull the four pins and steal my $800 fifth wheel.
It would not work on my 5th wheel rails. I have a pull rite
5th wheel and there is no room to put the lock and fasten
it. The rails are Curt rails and not Reese rails but they
still worked for the Pull Rite hitch just less room under to
put a lock.
Truly Larry
Perfect, just barely long enough but it works!! My boat bow mount electric motor and alternate bow mount anchor nest are now much more secure. Thanks...
Kenneth
2/21/2022
Flawlessly, no problems.
Works as advertised. Seems to be a pretty solid lock. One of the pics I saw showed a B&W hitch similar to mine so I pulled the trigger on the purchase. Upon install I couldn't get the lock piece to secure to its pin. My base rail system (B&W custom rail kit 2017 RAM Cummins D) design was not allowing the lock to secure do to not having enough space/room. I finally ended up getting it secure by some "fanagalling" but it ends up being a tight fit in a tight space especially if I want to get the key in. Wish the pin piece was just a tad bit longer. All in all great product and does what it is supposed to do.
Ordered a pin lock and immediately received an e mail that it would be a few days to receive, but they offered a comparable replacement they could ship immediately. While I chose the pin lock I originally ordered, their suggestion was much appreciated.
They also followed up and let me know when my items were shipped and asked if I had any questions, or if there was anything else they could do for me.
Great service, great products, great prices. Great company.
Ordered 2. One had a defective locking mechanism and would not release the pin. Other one works fine, although the lock does not appear to be a precision assembly. The returns process with eTrailer is great. No hassle. They sent a UPS prepaid label for the return.
perfect just what i was looking for works great.. using it on a 5th. wheel receiver mounted in bed of pickup truck so it does not grow legs and disappear we do not take it out when not in use it's left mounted in truck. .
The product works as advertised, however, the rails I have do not have the clearance required to use it. I cannot get the cylinder onto of the rail to lock it. If this product was 1/2" longer it would be great.
(Curt Rails)
Shipping was fast, as always from etrailer.com.
Product works as described in company website, well built lock. Expect years of service from this product.
Ronald
7/6/2019
The lock is working as new, no issues. Well built product, expecting years of use.
It was a little tight getting onto place on my 5th wheel hitch base but works great.
I would recommend
Product was correct and delivered quickly, lock works easily and smoothly...dust cap is great. One note is that there is insufficient room on my rails between the bottom of the pin and the top of the rail to allow the larger lock portion to fit over the pin portion of the lock. Mine just fit...if the pin was only 1/8" shorter, I would not be able to fully engage the lock onto the pin.
The 5th wheel hitch locking pin I ordered worked good and the price was not to bad. Also I received it quick. I am totally satisfied. I would order from Etrailer again.
Do you have a question about this Trailer Hitch Lock?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gene M.
2/3/2020
one year later and still lookin good Thanks!