See what our Experts say about this etrailer Trailer Tongue Lock

• Coupler Lock Recommendation for Demco EZ Latch Style Coupler
  The Demco Channel Tongue Trailer Coupler - Zinc - 2-5/16" Ball - 3" Channel - Bolt On - 18K # DM14040-81 has an integrated 5/16 inch pin hole with a 3 inch span for that lockable feature. I recommend using the Trailer Coupler Lock # e98888 which has a 3-3/8 inch span and is 1/4 inch diameter.
  view full answer...
• How to Lock a 1970 Camper to Truck When No Hole Exists for Padlock
  Hey Beverly, thanks for reaching out! If your older coupler doesn't have a hole through it for a locking pin, then we'll either need to get you setup with a replacement coupler, like the A-Frame Trailer Coupler # CA-5210-B, or you'll need to carefully drill a hole through the latch on your coupler and use a pin lock like the etrailer Surge Brake Coupler Lock # e98888. Aside from that there just simply aren't any options that fit over your coupler while it's connected to your tow vehicle.
  view full answer...
• Pin Lock To Secure Bulldog Collar Lok Coupler to Hitch Ball
  Which specific Bulldog coupler do you have? Does it have a latch with a pin in it by chance?
  view full answer...
• Recommended Base Plates For 2011 Ford Focus Compatible With Roadmaster Tracker And Flat Tow Parts
  For your 2011 Ford Focus, in order to use the Roadmaster Tracker Tow Bar, your only option is to use the Roadmaster EZ Base Plate Kit - Removable Arms # 524413-1A and unfortunately the instructions you have are all I can offer. The pictures help walk you through it. In the attached instructions you will drill 2 holes and the location will be based on the bracket's other holes that fit into predrilled locations, so it will be easy to mark accurately. The torque specs for the bolts are...
  view full answer...
• Is There Demco Surge Coupler that Can be Used with Drum Brakes
  Hey Al, so we have a solution but since disc brakes require a higher PSI than drum the # DM62VR would not work on drum brakes. Instead you'd want to go with the part # DM72VR which is basically the exact same thing but made for drum brakes. You can lock this to a hitch ball with the coupler lock like the etrailer # e98888.
  view full answer...
• What Size Lock Pin Is Needed for the Coupler on the Yakima Rack and Roll Trailer Part # Y08107
  It sounds like you are referring to a coupler latch lock that is used to lock the latching mechanism of the coupler onto the hitch ball. If this is the case then you would want to use a 1/4" diameter pin like part # e98886. I have attached a photo of where this pin will need to be installed on the Yakima Rack and Roll Trailer part # Y08107 for you as well.
  view full answer...
  
• Electric Trailer Jack Options for a 2005 Northwood Nash M-16C Trailer
  I have several electric trailer jacks that will work with your 2005 Northwood Nash M-16C which I have attached a list of for you. I recommend the Stromberg Carlson Electric Trailer Jack part # JET-3755. This jack has a 3,500 lb capacity (tongue weight) and offers up to 24" of lift. It has a drop leg for faster lifting, LED lights for visibility, and a built-in bubble level. I have also attached a review video of this jack.
  view full answer...
• How to Get etrailer Lock Core Keyed to the Same Number I Have on My Other etrailer Locks
  Hello Danny, Yes, it was a lovely Thanksgiving with family. Hope you enjoyed yours as well. We unfortunately do not sell just the pin portion. We do have one with a longer span, the etrailer Surge Brake Coupler Lock - 3-3/8" Span - 1/4" Diameter - Chrome # e98888, it does have the keyed alike option for an addition $1.75 so we can match it to your other locks. I suggest giving our customer service a call to place the order so they can ensure you get the right key number. 1-800-940-8924...
  view full answer...
• Replacement Coupler Lock for a 03133 AL-KO AK 26
  Hey Val! Is it similar to the etrailer Coupler Lock # e98888? I tried looking up that part number online but was unable to find anything about it. Feel free to shoot any photos to me in a reply to the email you received from me if the lock design is different!
  view full answer...
• Lock for Demco Hydraulic Brake Actuator
  Hi Frank; I'm sorry to say the # IR66FR is not compatible with your Demco Hydraulic Brake Actuator # DM72VR since it is stamped and not cast. For whatever reason they don't have a different version for that Demco coupler style. You will have to stick with a standard pin lock like # e98888 or get a surround lock like the BulletProof Hitches Extreme Duty Coupler Lock # BPH96VR. I like the surround style since it takes more work for your average thief to defeat it. What kind of trailer do...
  view full answer...
• Coupler Lock Recommendation For Dexter DX7 Coupler
  Hello Bob, thanks for reaching out. We have a few option for locks that will fit the Dexter DX7 coupler. For a locking pin I recommend the etrailer Surge Brake Coupler Lock # e98888. This will allow you to lock the coupler to the ball. The picture below shows it installed on a similar Dexter surge brake coupler. If you are looking for a lock for while the trailer is in storage, I recommend the Blaylock EZ Lock Trailer Coupler Lock # BLTL-33. We have confirmed that this will fit on the...
  view full answer...
• Can I Order Multiple Weigh Safe Lock Sets WS28ZR And Get Them Keyed Alike?
  Hello Ricky, thanks for reaching out. I am sorry to say we do not offer a keyed-alike option for the Weigh Safe Lock Set # WS28ZR. You can absolutely order multiple sets, but there is no guarantee both sets will use the same key. If you are looking for a coupler lock that can be keyed alike we do have the following: - etrailer Surge Brake Coupler Lock - 3-3/8" Span - 1/4" Diameter - Chrome # e98888
  view full answer...
• Pin Lock to Secure Dexter Surge Actuator 099-175-20
  Hey Charles, the etrailer coupler lock part # e98888 would work great to lock the Dexter brake actuator # 099-175-20 to your hitch ball.
  view full answer...
• Comparing Demco Channel Tongue Trailer Couplers # DM16080-95 & # DM15931-95
  The only difference in the Demco Channel Tongue Trailer Couplers # DM16080-95 and # DM15931-95 is going to be the bolt pattern. One will have the 5-Bolt hole pattern and the other is going to have 4-Bolt holes. I have included images below showing the measurements for each of these bolt patterns to compare with what you have on your trailer. The etrailer Surge Brake Coupler Lock # e98888 will allow you to secure the coupler while attached to your vehicle. We also have a Pin # 37201211...
  view full answer...
  
• Coupler Locks For Dexter A-60 Brake Actuator When Towing and When In Storage
  We do have locks that will work with your Dexter A-60 Brake Actuator # DX56FR. The Coupler Lock # e98888 will allow you to secure the trailer to your vehicle when towing. This lock pin replaces the included push pin which comes with the actuator. For storage you will want to use the Fastway Universal Trailer Coupler Lock # FA86-0015-316. This can be used with the coupler lock above as well.
  view full answer...
• Trailer Coupler Hitch Lock For Dexter DX7.5L A-60 Brake Actuator # DX56FR
  Yes, the etrailer Surge Brake Coupler Lock # e98888 will allow you to lock the Dexter DX7.5L A-60 Brake Actuator # DX56FR to your 2" hitch ball. We also have the Blue Ox Hitch Receiver and Coupler Latch Lock Set # BLU36XR if you want a matching lock for your hitch in the receiver.
  view full answer...
• How To Lock Dexter DX7.5 Drop-N-Go Brake Actuator While Not In Use
  The best way to lock and secure the Dexter DX7.5 Drop-N-Go Brake Actuator part # 099-175-20 while not in use would be to use a wrap-around coupler lock like the Blue Ox Trailer Coupler Lock part # BX88351. If you want to lock the trailer to the vehicle while not in use then you can use a pin lock like the etrailer Surge Brake Coupler Lock part # e98888.
  view full answer...
• Locking Coupler Pin Capable Of Fitting A Demco eZ-Latch Coupler With 2-5/16 Hitch Ball
  You will need to use the etrailer Coupler Lock # e98888 with your Demco Trailer Coupler # DM14040-81. The InfiniteRule Lock is only for a 2" Demco eZ-Latch coupler. The etrailer lock above is longer to fit your wider coupler.
  view full answer...
• Lock Recommendations for a Collar-Lok Style Trailer Coupler
  It sounds like you have a Collar-Lok coupler such as # BD028244. For that type of coupler you could use lock # BLTL-23. The body is aluminum but the pin inside that goes way up into the coupler is steel. It fits 2-5/16 inch Collar-Lok couplers. For 2 inch models use # BLTL-22. Another option, if your coupler has the pin behind the collar to keep the collar from sliding back, is to use a lock such as # e98888 in place of the pin. This would prevent the collar from opening all the way. Or,...
  view full answer...
• How To Lock the Dexter DX7.5 Drop-N-Go Brake Actuator
  The tethered pin on the Dexter DX7.5 Drop-N-Go Brake Actuator part # 099-175-20 is what will be used to secure the hitch ball inside the trailer coupler. If you're looking for security then this can be replaced with the etrailer Surge Brake Coupler Lock part # e98888.
  view full answer...
• Dimensions Of Demco Hydraulic Brake Actuator # DM72VR and Coupler Lock
  The Demco Hydraulic Brake Actuator # DM72VR is 18-1/8" long. I have included an image with this measurement and others you may be needing. You will be able to secure this to your truck using the etrailer Surge Brake Coupler Lock # e98888.
  view full answer...
  
• Coupler Lock for a UFP A-60 Boat Trailer Actuating Coupler
  From what I was able to find in the research I did, the recommended lock for a UFP A-60 coupler is a simple pin design, # e98888. This should prevent the handle from operating while the lock is in place (basically used in place of the pin. The difference is that this pin includes a lock). In my research I found that locks like # BLTL-33 are not considered a fit.
  view full answer...
• Can Coupler Pin Be Added To Demco Trailer Coupler
  Yes, you can use a coupler pin or safety pin with the Demco Trailer Coupler # DM14040-81. A pin like the # 37201211 will fit the 5/16" pin hole or you can use the etrailer Surge Brake Coupler Lock # e98888 if you want even more security.
  view full answer...
• Keyed Alike Trailer Coupler Lock for Demco EZ-Latch Coupler System
  Thanks for reaching out, Tripp! To get multiple locks keyed alike that are compatible with the Demco EZ-Latch you'll need to go with our etrailer Surge Brake Coupler Lock # e98888 - just be sure to choose the "keyed alike" option from the drop down menu prior to placing your order. The InfiniteRule Lock for Demco EZ-Latch Trailer Couplers # IR66FR you were looking at is keyed unique so we don't have a way to get that specific lock keyed alike for you.
  view full answer...

Do you have a question about this Trailer Tongue Lock?