What our customers are saying:
Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast.
John
Mankato, MN
Videos
for Wheel Well Liner
Help Articles
Expert Answers
The Gen-Y Weld-On 2" Receiver Tube #325-GH-003 is 2-7/8" wide on the tube and 3-1/2" wide at the collar. The overall length is 12".
I recommend going with the Timbren Suspension Enhancement System #TFRSDJ for your 2024 Ford F-450 Super Duty because it's designed better for pickup truck-type applications. The other Timbren kit #TFRTT350J is designed more for Severe…
In almost all cases 3,500 lb axles will all use the same bearings. If your trailer has a Lippert or Dexter 3,500 lb axle then yeah they would be the same. But to be safe it won't hurt to pull them off and get the numbers. If you are sure you…
For your 2014 Ford F-250/350 Super Duty you will want to use Wheel Masters 4-Hose Inflation Kit part #WM8001. The bend on the Wheel Masters 4-Hose Inflation Kit part #WM8001-135 causes the hoses to be in contact with your rim as soon as it comes…
The hub covers that I have are only available in chrome ABS finish. The Quick Trim Chrome Finish Trailer Hub Cover 6 on 5-1/2, part #QT655C, is a cover that will fit a 6 on 5-1/2 inch bolt pattern wheel. The Quick Trim Chrome Finish Trailer Hub…
Although we do not have a direct replacement for the Dicor V19582-EJN, the Replacement Wheel Master Lug Nut Cover for Wheel Liner - Qty 1 #WMRMT9061 will fit a 22 millimeter lug nut. From what I have found, the jam nut you are looking for has been…
I can absolutely tell you the difference between the two options. The Kwikee 38 Series Electric Step #LC3723383 comes with a control module, which means it will automatically extend. The Kwikee 38 Series Electric Step #LC372338 does not come with…
The Lippert Components Kwikee 32 Series #LC3722617 referenced in your question includes the standard drive operation (5316) but not a switch kit. The Kwikee 32 Series Step #LC3722615 that you also referenced includes the Logic Control Unit (9510)…
That's a good question, and I can confirm for you that the Timbrens which fit your 2021 Ford F-450 Super Duty 4WD, the Timbren Suspension Enhancement System #TFRSDJ are 100 percent compatible with a 5th wheel hitch. They install between the…
For replacing the Drive Head #LC34FR and Idler Head #LC87FR on a Solera Slide Topper you will want to completely remove the slide topper from your RV/Camper. You will need to insert a pin into the end of the tube end cap(see image) to keep the…
Your Curt Pop-In Ball for Factory Ford and Ram Underbed Gooseneck Hitches - 2-5/16" Diameter Ball #C60601 lifts the pin when that lever is lifted. Because that lever is broken off you will need to lift that pin and turn it 90 degrees to…
I do have options for you, but the Wheel Masters Inflation Kits are not vehicle specific parts. They are going to depend on the wheel set-up that you have. However, I can provide you with a couple of the most common options we typically see on the…