1999 GMC Yukon Trim Kits

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The manual switch for the Pace Edwards Bedlocker Retractable Hard Tonneau Cover #PE44CV can be found as part #311-BL-1120 on our site. This plugs into the harness at the canister and then you route and install the switch wherever it works best for…

The Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F95FV will be just fine if you need to lift your 2022 Ford F-250 Super Duty, but it will be good practice to lower the psi rating to 5 prior to lifting the truck. I confirmed this…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The 2 inch trailer hitch I recommend for your 2024 Mazda CX-5 is the etrailer Trailer Hitch #e98902. This is the best due to its matte black powder coat which resists the inevitable scuffs better than other hitches.

The best way to improve the handling and stability of your 2011 E-450 motorhome is going to be with a rear sway bar upgrade like the Hellwig part #HE78RR. This will make the biggest difference and honestly should be the first thing anyone with a…

The BAKFlip MX4 Tonneau Cover #BAK48330 for the 2022 F-250 short bed has 4 panels. While you are using your Demco Autoslide 5th Wheel Hitch #DM8550024 you will be able to keep one panel laying flat on the bed. There are tow ways you can store the…

For your 2023 Subaru Outback, I recommend the Curt Trailer Hitch item #C69VV. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver. I really like this hitch because it is an…

I found the online version of the install instructions for the Exact Center stabilizers like the #RM47MR. What's fun is that just when you think you have found the correct step to address your problem it tells you to continue to the next…

The Hellwig 7180 is our part number #HE78RR and the part 7718 is the part #HE26GR which I have confirmed fit your 2015 Tioga Ranger 31D on a E-450 chassis. I sent an update to have the instructions fixed.

Your 2019 Ford F-350's Upfitter Switches can be used instead of the toggle switch for the Manual Switch Kit for Pace Edwards Bedlocker or UltraGroove Electric Tonneau Cover #311-BL-1120. The Manual Switch Kit #311-BL-1120 will work with the…

Yes Terry they do! the Putco Chrome Door Handle Covers part #P401067 that you referenced do fit a 2024 Ford F-350 Crew Cab.