View Cart

Ford F-250 and F-350 Super Duty Front Mount Hitch

Select Vehicle Year

  
Front Mount Hitch

Available Years for Ford F-250 and F-350 Super Duty Front Mount Hitch


Front Mount Trailer Hitches

Front mount hitches are the perfect addition to your vehicle when you require the use of a recovery winch, tow loop, putting your boat in the water, or other accessory. We offer a large selection of front mount receivers by popular manufacturers like Draw-Tite, Reese and Curt so you can find the one that is right for your application and your budget. All front mount receiver hitches we offer are made in the USA and come with a limited lifetime warranty.

You can find all the custom-fit front mount receiver applications we offer for your vehicle by choosing the year, make, and model to the left. Don't forget the hitch-mounted winch mount plate to make any winch installation hassle-free!




Front Mount Hitch Accessories



Front Hitch Manufacturers

Search For Custom Fit Ford F-250 and F-350 Super Duty Accessories
Select A Category Below



Ford F-250 and F-350 Super Duty Front Hitch Videos

Best 2014 Ford F-250 and F-350 Super Duty Front Hitch Options

Here are our best two hitch options. Here on top we're going to have the Draw-Tite. Here on the bottom we're going to have the CURT. Now in my opinion, as far as which hitch I would pick, it would be the Draw-Tite. It's going to work well with either the two-wheel drive or four-wheel drive model vehicle. It's going to stay completely hidden behind the air dam on the vehicle and it's going to do everything you need to do.



Best 2013 Ford F-250 and F-350 Super Duty Front Hitch Options

Here are our best two hitch options. Here on top we're going to have the Draw-Tite. Here on the bottom we're going to have the CURT. Now in my opinion, as far as which hitch I would pick, it would be the Draw-Tite. It's going to work well with either the two-wheel drive or four-wheel drive model vehicle. It's going to stay completely hidden behind the air dam on the vehicle and it's going to do everything you need to do.



Best 2012 Ford F-250 and F-350 Super Duty Front Hitch Options

Here are our best two hitch options. Here on top we're going to have the Draw-Tite. Here on the bottom we're going to have the CURT. Now in my opinion, as far as which hitch I would pick, it would be the Draw-Tite. It's going to work well with either the two-wheel drive or four-wheel drive model vehicle. It's going to stay completely hidden behind the air dam on the vehicle and it's going to do everything you need to do.



Best 2011 Ford F-250 and F-350 Super Duty Front Hitch Options

Here are our best two hitch options. Here on top we're going to have the Draw-Tite. Here on the bottom we're going to have the CURT. Now in my opinion, as far as which hitch I would pick, it would be the Draw-Tite. It's going to work well with either the two-wheel drive or four-wheel drive model vehicle. It's going to stay completely hidden behind the air dam on the vehicle and it's going to do everything you need to do.



Draw-Tite Front Mount Trailer Hitch Installation - 2013 Ford F-250 and F-350 Super Duty

Today on our 2013 F350 Super Duty, you're going to be taking a look at, I'm going to show you how to install the draw tight, 2" front mount trailer hitch receiver.This is what our hitch looks like when it's installed. As you can see, the cross tube is completely hidden behind the air dam. It's going to maintain a nice clean look on the front of our vehicle. This hitch is going to be great for any of your front hitch or front vehicle mounted accessories, spare tire carrier, winch, maybe a snow plow, even.It's going to give us a 2" by 2" tube opening. This hole here, is going to be our hitch pin hole. It's going to be 5/8" in diameter.



Curt Front Mount Trailer Hitch Installation - 2013 Ford F-250 and F-350 Super Duty

Today on our 2013 Ford F350 Super Duty, you're going to be taking a look at and I'm going to show you how to install the Curt 2 inch front mount trailer hitch receiver.This is what our hitch looks like when it's installed. It's going to give you a 2 inch by 2 inch receiver tube opening, a 5/8 inch hitch pin hole. This hitch can be used in a lowered or raised position. In the lowered position, the bottom of the receiver tube is only going to sit about 3 inches off the ground. Our side plates, these are going to be mounted to the frame rails. These are only going to sit about 3-1/2 inches off the ground.



Draw-Tite Front Mount Trailer Hitch Installation - 2006 Ford F-250 and F-350 Super Duty

Today, the 2006 Ford F350 Super Duty, we're going to review and install the draw tight front mount trailer hitch receiver, part number 65022.This is what the hitch looks like once installed on our truck. What's really nice is the appearance of it, it all sits behind the bumper here, so it has a nice clean look and there's nothing sticking out.We have a standard two inch opening right here, which is great for a variety of accessories out there, such as a winch, that you can plug into here. Certain snowplows will plug into your front and work with that as well.We'll take a look at the side of the receiver here. You can see it uses a standard five eighths diameter hitch pin here, or your favorite locking hitch pin.You'll notice that the smaller diameter hole here, this is designed to work with the J Pin anti rattle stabilization pin for certain accessories that do not have their own anti rattle device.Now this is really intended for a winch being installed on the front of this here, and we'll cover the ratings for that. This is going to be .. This is going to have a maximum winch line pool of 9,000 pounds, and then a cargo capacity, which is the weight pushing down on the hitch this way, it's good up to 500 pounds.A couple of other unique ideas to use this hitch with, is actually use your ball mount you pull a trailer with, put it in front, and that way you can steer your trailer into tight corners or tight areas wherever you go park your trailer at.



Front Mount Trailer Hitch Installation - 2008 Ford F-250

Today on our 2008 Ford F250, we're going to take a look at and also show you how to install the Draw-Tite custom fit front mount trailer hitch receiver, part number 65049. Now this is what our hitch is going to look like once we get it installed. As you can see the majority of it's going to be hidden here behind our front fascia. Got a small cut out there that we're going to make to allow that receiver tube opening to come through the front. Now this front mount hitch is typically going to be used for a front mount style wench, maybe a front mount snow plow or even some maneuvering of trailers around your yard potentially. Some people like to put a ball mount here and then get greater maneuverability with their trailer and kind of move it around without having to get two or three people together to kind of push it. Now it's a 2 inch by 2 inch receiver tube opening, so this is also going to work out really well with a lot of the class 3 accessories out there.



Front Mount Trailer Hitch Installation - 2006 Ford F-350

Today on our 2006 Ford F-350 we're going to take a look at and also show you how to install the Curt Custom Front Mount Receiver Hitch, part number 31114. Now here's what our hitch is going to look like installed. As you can see it's a pretty nice looking hitch. It sits right here in the center of our already existing opening in our truck, so we don't have to worry about cutting or trimming anything there. This is going to be a 2" by 2" receiver tube opening, so there's going to be a great deal of accessories available for it, including your snow plows, some people will put front-mount cargo carries on it, winch mounts. It shares the same 5/8" diameter pin hole here, so any of your Class III accessories will work out fine.



Front Trailer Hitch Installation - 2008 Ford F-350

Today on our 2008 Ford F350 Super Duty we're going to be taking a look at and installing the Curt Front Mount Trailer Hitch Receiver, part number C31008. Here's what our hitch looks like installed. As you can see it's got a nice black powder-coated finish. Two by two square hole with a 5/8 hitch pin. This would be good for your front mounted winches, cargo carriers, snow plows that will fit into a front mounted hitch, or a bike rack, or even a spare tire mount. It's designed to hold 9,000 pounds of line pull if you're using it for winch. 500 pounds of vertical pressure, and a 5,000 pound gross trailer weight if you're going to be pushing your trailer, or backing it into a space.



Front Mount Trailer Hitch Installation - 2012 Ford F-250 - Curt

Today on our 2012 Ford F-250 Super Duty, we're going to review and install the CURT front mounted trailer hitch part number C31018. Now with our hitch installed, here's what it'll look like. As you can see the majority of our hitch is covered behind the front air dam. The only thing we really have exposed is the side bracket. This is a full steel and welded construction. It's got a nice black powder coated finish and when installing your pin and clip, you just need to reach behind the air dam to access the pre-drilled 5/8" inch pinholes.



Front Mount Trailer Hitch Installation - 2002 Ford F-250 - Curt

Today on this 2002 Ford F250 Super Duty Crew Cab, we're going to install Part Number C31014. It's the Curt Front Mount Trailer Hitch Receiver. This is what our front mount hitch looks like on our truck once it's installed. Next we'll give you some measurements to help you in selecting some accessories for your front mount hitch, like a snow plow or a winch mount for your front hitch. From the center of the hitch pin hole in this case to the outside edge of the bumper, which would be the license plate bracket will be about 7 and a half inches. From the top of the receiver opening down to the ground will be about 13 and a quarter inches.



Trailer Hitch Installation - 2003 Ford F-250 - Draw-Tite

Today on our 2003 Ford Super Duty, we'll be installing a Draw-Tite front hitch, part number 65022. Here's what our hitch looks like installed on our vehicle. Now in this case we'll go ahead and just give you one measurement to help you choose some accessories for your hitch. From the center of the hitch pin hole to the outer most edge of the bumper is approximately 3 3/4 inches. Now, because this truck has a lift kit on it, we are unable to give you a factory height from the top of the opening in the receiver to the ground. Let's go ahead and install our hitch.



Front Mount Trailer Hitch Installation - 2012 Ford F-250

Today, on this 2012 Ford F-250, we're going to install part number 65049 from Draw-Tite. This is what the hitch looks like when its installed on the vehicle. Next, we'll give you some measurements to help you out when selecting some accessories. From the top of the receiver openings down to the ground should be about 15-3/4 inches and from the center of the hitch pin hole to the edge of the bumper in this case, we measured out to the license plate, its going to be about 5-1/4 inches. Now, we'll go ahead and show you how the hitch is installed. First thing you need to do is go ahead and remove some bumper brackets there at the end of the frame.



Front Mount Trailer Hitch Installation - 2008 Ford F-350

Today we are working on a 2008 Ford F-350. We will be installing a front mount hitch by Draw-Tite part number 65049. Here are a couple of measurements that will assist you with ing accessories for your new hitch such as a snow plow, a draw bar or a winch mount. From the center of the hitch pin hole to the outer-most point of the front bumper is 4-1/4 inches and from the top of the receiver tube to the ground is going to be 14-1/4 inches. Now let us go ahead with the installation. 0:28



Front Mount Trailer Hitch Installation - 2009 Ford F-250

Today on this 2009 F-250 we will be installing the front hitch part number 65049. We are underneath the front of the vehicle here, and we are going to go ahead and point out the mounting location for the trailer hitch. We are actually looking at the passenger side frame rail on the outboard side and we have got a couple holes visible. If you look more forward towards the bumper side you will see a 9/ 16 size hole right there. That is going to provide our forward most attaching point for our trailer hitch. I do want to note on some of the newer model vehicles with four wheel drive. It has a bigger air dam here at the front and this air dam will need to be trimmed on those four wheel drive models. If you do need to trim the air dam just go ahead and give it a test fit and maybe take some dimension and go ahead and cut it before you get started. 00:40





Ford F-250 and F-350 Super Duty Front Hitch Questions and Answers