Custom Fit 2015 Jeep Wrangler Unlimited Accessories

The difference between the two models that you were researching is that the #PD9160A is designed for use with lead acid batteries and the #PD9160ALV is designed for use with lithium batteries. Choosing the incorrect battery profile can lead to…

No, need for pictures! I have exactly what you need. It is the Pollak 6 Pole to 4 Pole Connector Adapter item #PK12717. This will plug into your RV's 6-pin and allow you to control your Wrangler's lights through its 4-way connector.

The Progressive Dynamics 9300 Series Battery Converter Charger #PD89RR has the different plug as it requires plugging into a 20 amp circuit. This is due to having the higher output which requires additional power into the unit. Since you currently…

What you need is a light kit specifically for flat-towing. The Plug-N-Tow TM Vehicle Wiring Harness, #42615, would be if the Jeep were towing a trailer and not for activating its lights while it is being towed. There are a few options for lighting…

You link to #C59HR, the Curt Tow Bar Extension Cord w/ Socket. This connects the 7-way, blade-style connector from an RV to the 6-way round connector used for towed vehicles. This drops the black wire, the battery hot lead.

It does look like the D-ring/Tow Recovery hooks on the Rugged Ridge Arcus Front Bumper connect directly to the frame of your 2020 Jeep Gladiator, which is required in order to be able to flat tow with the D-rings, so you're well equipped with…

We have what you need. I will list them below for you. The Blue Ox Aftermarket Off-Road Bumper Adapter - 7/8" Pin #BX88357 for your 1 inch D-rings. The etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates - RV Mount - 2" Hitch - 6,000…

Most likely you will not need a brake light relay for your 2015 Jeep Wrangler Unlimited. I recommend wiring the Wrangler first and checking to see if you need a brake light relay before installing it. You will want to connect the Jeep's wiring to…

I checked the install instructions for the Roadmaster base plate kit #RM-521448-4 which is a fit for your 2017 Jeep Wrangler Unlimited and like you said the only permanent modifications needed is the trimming of the rock guard like in the picture I…

I went out to the warehouse and pulled a set of Curt Single Hook, Coiled Safety Cables #C80151 to measure the size of the eye opening for you. The width at the widest point is 0.65 inches (between 5/8 and 11/16 inches). And at the longest the opening…

I checked out the Rugged Ridge HD Stubby bumper you are considering and what you could do to flat tow with it is use a D-Ring bumper mount like the part #RM-035-1 for if the D-Rings were 1 inch thick or the #RM-035 for if they are 3/4 inch thick as a…

We can get you set with recommendations, the first being to ensure that your Jeep TJ has a front bumper that is actually rated for towing with the D-Rings. If it is, you have the option of using the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster…