To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In-stock alternatives that can ship today
Tekonsha ModuLite Wiring Harness with Powered Converter by Draw-Tite, Hidden Hitch and Reese
Features:
Warning: Overloading circuit can cause fires. Do not exceed lower of towing manufacturer rating or:
Included with Hardwire Kit:
California residents: click here
Average Customer Rating: 4.6 out of 5 stars (179 Customer Reviews)
Tekonsha ModuLite Wiring Harness with Powered Converter by Draw-Tite, Hidden Hitch and Reese
You’re gonna love this! I put the hitch on my Corvette to haul a small luggage trailer on long trips. The hitch works great!
Everything fit perfectly and we (my wife and I) got it all assembled within a couple hours! (We haven't done the wiring yet. That will wait for another day.) Taping the washers to the frame, as was suggested in one review, was most helpful. It was only necessary when attaching the last end, because the bolts had to be pushed all the way back for that end to be put in place.
The shipping was quick and free however the packing of the shipping box was very poorly executed. An electronic device, a circuit protected trailer light power module and accessories were shipped in a 10x7x5.5" box with no packing materials to keep the contents from being bounced around in the box which base on the visible crushing of the box was bounced around quite a bid during shipping. Any item shipped needs to be packaged to prevent it from free movement in the box. bouncing around in a box is the worst thing for an electronic device. I hope the module has not been damaged. I ordered this to replace a module that experiences intermittent failure in my vehicle apparently from something damaged in the module.
Jenny N - 10/03/2022Parts fit perfectly and appeared to be good quality.. The video’s were so helpful when applying the products!!! Would highly recommend
2014 WRX wagon at taillight: WHT/RED = Turn signal
BLK/WHTstripe = Running light
BRN = Brake light
I mounted the modulator behind the left turn signal. I routed the power wire through the trunk via rubber access plug. I then fished the power wire under rear seat and stuffed it under plastic trim molding along the doors. I went behind left kick panel and then came out and ran it into the fender well, between the door and the fender, and up a structure tube into the engine compartment. The wire is safe from damage and will not be crushed by shutting the door because of the rubber door seal. I ran my XM ant. wire like this also and there are no negative consequences.
Etrailer always comes through with products that are easy to use and at a fair price. The auto trailer wiring kit was easy to install, and works good. All the products I've ordered from etrailer have been great.Great company to do business with.
I haven't installed the hitch or the wiring harness as of yet as I only received everything Thursday in great shape I should add. The wiring looks a little complicated but like I said only yesterday I received it yesterday, but it pretty much looks straight forward.
Mike L - 08/19/2022I've had nothing but great experiences with etrailer in ordering and installing 2 hitches on my 2 MB SUV's, this was no different. Good product, easy to follow/logical instructions and excellent customer service
Adrian - 07/07/2022Unit easy to install if you watch the video first and take notes on which light wire in the car goes with the appropriate wire on the module.
Quick shipping with constantly updated tracking information.
Sierra K - 05/24/2022This is the second tow hitch I have ordered. It has such an easy install for both, one for a honda cvr, the other for a mercedes ml350, the easiest installs I have ever had!!
My wife took this picture of my Son and I working on a truck the other day. We were installing electrical connections we had recently ordered from you guys for a truck that has a new hitch on it that also came from you guys. One of your boxes is in the photo. Figured you would appreciate it. I am sitting on the ground with my head up under the truck Good times!
[Thumbs up]
Part installed as advertised. Works gre at!
It feels heavy duty and is working exactly as it should. Easy wiring in my 2005 Passat TDI. The most difficult part was bring the 12ga wire from the battery to the rear of the vehicle. The effort was worth it; I have a professional looking install that works perfectly.
Eric P - 05/03/2014I received a box with the module, some wire taps, zip ties and a separate package of power wire. No instruction no any kind of paper work.
I recommend the Tow-Ready 119147KIT instead of the Curt Model for a 2013 Prius. I had to return the Curt Kit because the running lights/tail light stayed on all the time even with the vehicle off. Sometimes there wasn’t a tail/running light on if you reset the converter by removing and re-installing the fuse. This Tow-Ready model works like it should. You'll need 12 gauge wire to run from the battery, (right side hatch area,) to this unit which will need to be mounted on the driver’s side, rear hatch. At the very top of the left rear tail light are covered wires going into a plug. The Blue is the Stop light and the Brown is the tail/running light. (Be careful since these wires are thin solid copper wires.) Left turn signal is the green/yellow stripe wire and on the right side rear lamp the right turn signal is also the green/yellow stripe wire. You will need to remove the left rear panel to get to the blue and brown wires. Remove the bottom tray cover, the bottom tray as well as the left rear plastic tray and the plastic bottom hatch trim over the latch assembly. Remove the Phillips screw on the left rear panel as well as the chrome tie down clamp. This sounds harder than it really is. Good luck!
GREETINGS,
YOU GUYS ARE GREAT! I WAS APREHENSIVE ABOUT WHETHER OR NOT THIS KIT WOULD WORK ON MY 2005 HONDA ELEMENT DUE TO HONDA'S OEM TRAILER HARNESS (NO LONGER AVAIABLE)BEING SO TECHNICAL WITH DIFFERENT HARNESSES FOR DIFFERENT YEAR ELEMENT MODELS. YOUR KIT WAS SPOT ON AND BEING ABLE TO GO TO YOUR WEBSITE ACCESS THE VIDEO TUTORIAL WAS ALL I NEEDED TO HAVE A PAINLESS INSTALL, FUNCTIONING RIGHT AND PORPER ON THE FIRST TRY. THANKS FOR MAKING MY GARAGE TIME ON THIS PROJECT STRESS FREE!!!
Comprehensive kit - came with everything needed for easy installation! Would highly recommend for anyone needing to power vehicle trailer lights. The online PDF was very helpful as well to see the wiring diagram and be able to view >100% for those with difficulty reading the paper instructions :)
This kit lacks any type of instruction in the package but appears complete. At the price I expect clear instruction without needing to look for them online. The leads on the module are about 5 or 6 ft too short to be of use on the 2022 Sorento PHEV SX I have, ground and power are only identified on your installation video. As well, the splices provided are for wires larger that in that vehicle leading to failed connections on each wire!For the price I paid I certainly expected that I would NOT have to scour several local shops for the parts to finish the job nor to have to refer and search necessary information!.
Jenny N - 12/16/2021Easy and quick installation, works grea t!
Ordered this, together with a hitch receiver. etrailer waited a month to update the delivery date for the hitch receiver to 3 months ahead, so I canceled the hitch receiver and requested they send me this Upgraded Modulite vehicle wiring harness kit, which came incomplete. I called and got the rest of the items sent, which took another week. Hopefully installation goes as indicated int he instructions.
Great kit. Installed in 2021 Kia Sorento. Would advise soldering the wires into harness instead of using the crimp connectors. Fits well in same compartment as tire kit under back deck. Would be nice if the manufacturer instructions were included. Other than that, very happy with it.
Guality stuff. etrailer.com is the only place I buy trailer stuff.
I purchased a trailer and connector for my Lexus NX300 Hybrid and it works well!! The Lexus dealer told me I could not add a trailer or I would lose the ability to use my foot to automatically open up the trunk (sensor). However your team told me that I could have the trailer and not lose access. Your team was correct and the trailer has come in handy. We have not carried anything on the hitch yet, but know we can if needed. Also, the trailer is very nice looking... you can barely notice it.
Just completed the installation of the 119147KIT on a 2014 Lexus RX350 and it works great. Everything needed was included in the kit and the installation process was fairly easy. As always when I purchase items from e-trailer things fit and the right amount of supplies are included as well as installation instructions. i have always had excellent service from e-trailer and have great confidence in doing business with e-trailer. I know that i will get a great product with support, if needed, and always a follow up e- mail to see if everything was OK.
Great place to shop.
Hans H - 01/28/2017My RX350 Lexus did not have a towing package, and I used this kit for getting all the trailer lights to work. It took me a little more time to make the electrical connections as I needed to probe individual wires to ensure I was connected to the correct wires. Once completed, everything worked fine and still does. Glad I did it.
Dave S - 07/06/2018
Do you have a question about this Trailer Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Helpful Link
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.