To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Quickly and easily install a 4-way trailer connector on your Honda Passport with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.
Features:
Specs:
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located in your rear cargo area, on the driver's-side. You will need to remove all floor coverings and cargo trays to access this harness. Once you've plugged in the connector, insert the provided fuse into the in-line fuse holder.
Once installation is complete, the 4-way flat connector will be stowed in your rear cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plug on your automobile and the 4-pole connector itself - to help prevent corrosion.
A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
California residents: click here
Average Customer Rating: 4.9 out of 5 stars (146 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your Honda Passport with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.Very nice, high quality wiring harness. Simple install, especially with the etrailer install video on youtube. Everything you need. Plenty of wire ties for a clean install both behind the trim and under the car running the harness outside. There's even a piece of 2 sided tape to mount the little control module box on the wheel well so it's not flopping around.
I was considering going with the factory Honda hitch and harness, but their harness is 7 pin and I only need 4. Not to mention it's way more expensive. The Draw-tite hitch has a built in bracket to attach a 4 pin harness bracket giving a clean factory type look.
When removing trim, beware the screw that holds the tie down anchor on the driver's side. I managed to strip mine and needed an EZ out to get it loose. No fault of the product, of course, but just be aware!
Everything was in stock and arrived super quickly.
The entire transaction from my ordering phone consult with Alex J. to the landing of the hitch/accessories at my doorstep exceeded expectations. The hitch install and wiring of harness was quite easy after viewing their install videos. Alex also gave me great advice to affect a direct connect of the wire harness to the bracket on my Drawtite hitch. Install video only showed an interior storage option for my Honda Passport. Highly recommend etrailer and the people that made my buying decision very easy.
This harness was just as described. Easy to install and well constructed.
My original contact with Anna E was very helpful and beneficial. Ordered the correct parts ( Draw-Tite bumper hitch and T one wiring harness). Slight delay in receiving the products because of back order BUT Anna kept me informed as to the new arrival date. The products came yesterday. I looked at the installation video by Brad about the wiring harness. My vehicle is a Honda Passport. He mentioned that instead of removing the side panel that I could install the harness by lifting up the side bucket. Well I tried to loosen the Phillips screw and the screw was so tight that I could not loosen it. Thank to Brad I used his short cut and all went well. If he had not shared this short cut it would have been a really big mess. The products are good and the people are super to work with. A very pleasant experience. Thanks to all. Sorry I can' share photos. I am of a lot of years and a dumb (flip) phone is good for me. The Draw-Tite bumper hitch was easy to install.
Product is excellent quality and ease of installation seems simple (although I will install it tomorrow). Great customer service as with all my previous orders especially the installation videos and various recommendations from their "experts". I wouldn't buy any products they sell from any other vendor.
The harness had a good price and the instruction videos showed exactly how to install it. I have used it several times and I’m very happy with it.
Simple, easy to install. Instructions on installation were easy to follow and the product was ultra high quality
perfection!
Hitch was delivered. Installed it and looks great. Just waiting on the wiring harness now to finish the job.
This will be my second T-1 wiring harness install on a Honda vehicle, it is very easy with no cutting splicing and mistakes in wiring since it has a direct plug in. For me the other attractive feature is that it can be stored inside when not in use which suits my needs well.
John S - 04/18/2022 John S - 04/18/2022Great wiring harness and associated ins tructions.
ALWAYS GOOD DOING BUSINESS WITH YOU
Thomas - 02/23/2023Easy to install the instructions for the wiring harness were straight forward
Initially wrong trailer harness was shipped due to a manufacturer packaging error. After contacting customer service, the proper harness was shipped immediately. I have previously bought from trailer and will continue to due so. Great products and customer service!
Easy set up and DIY project. No problems after install and several moves with a trailer.
Received trailer hitch and wiring harness on Saturday. Had everything fully installed in under an hour and a half! Quality equipment.
One piece solid Product. Exactly what I wanted, easy to install. Excellent instructions. ( especially the part about making sure the bolt holes are clear of weld debris)
Hardest part was to remove the rear quarter panel to access the factory connector. Rest was just plug and play, very quick and easy. Installed the supplied fuse and worked immediately.
This hitch receiver was extremely high quality and easy to install as advertised. The wiring kit was also easy enough to plug in to my existing wiring harness. This is my second hitch receiver purchased from etrailer and I'm very satisfied!
This harness works very well and the video instruction for installation was very helpful. I’m very happy with this product.
Easy install and works as advertised!
Perfect fit works well
This is the third vehicle that I installed an etrailer hitch on.
It’s getting easier to install each time. The entire process took about 15 minutes to complete.
100 Percent plug and play. I pulled it out of the box and plugged in my trailer lights in less than 30 minutes. Great Buy. A lot easier than searching each circuit.
My order for a Curt Class 3 Trailer Hitch Receiver and T-one Vehicle Wiring Harness came a day earlier than the actual delivery date. So far I installed the Trailer Hitch ( which took me approx 40 mins ) and I will be installing the in the next couple of days. The Hitch is a high quality hitch and well made. It was very easy to install and I'm looking forward to install the wiring because the hitch was so easy.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.