Menu Icon

1992 Geo Trailer Wiring

Change Make

Select Vehicle Model

Trailer Wiring

Available Models for 1992 Geo Trailer Wiring

Trailer Wiring Harness

Make installing your trailer wiring harness as easy as possible with a custom fit wiring harness. Trailer wiring from Draw-Tite, Curt, Pollak, Tow Ready, Bosal, and Hopkins eliminates or reduces the need to cut and splice wires. It also helps to protect your vehicle's sensitive electronics from mis-wired trailers.

Choose the year of your vehicle to the left to find a custom fit trailer wiring harness.

Wiring Adapter Fitguide

Trailer Connectors and Adapters

Wire and Wiring Accessories

Trailer Wiring Manufacturers


1992 Geo Questions and Answers

  • How to Wire Up a Motorhome 7-Way with a Separate Circuit to a 7-Way with Combined Circuit
  • The # RM-732 is the correct adapter to use to go from a separate taillight system like what you have on your motorhome to a combined system like what is on your tow dolly. For wiring your motorhome with a 7-way you would basically want to follow the wiring directions that are on top of the converter. The right side of the converter is the input side so you will need to test the wiring of your RV with a circuit tester like part # PTW2993 to determine function and wire it accordingly....
    view full answer...

  • Replacement Swivel Jack with Lowest Possible Retracted Height for Use on Small Utility Trailer
  • I was able to find a swivel jack option for you that has a retracted height of 11 inches from the bottom of the wheel to the center of the mounting bracket, but none of the trailer jacks with a caster that we offer have a retracted height of 10 inches or less. The jack that may work best for you is the Fulton F2 Trailer Jack, like # F1413040134. This jack has an adjustable mounting bracket with the lowest retracted height being 11 inches. The lift height of the jack is 10 inches, and...
    view full answer...

  • Parts Needed to Flat Tow a 1992 Geo Tracker Behind a Motor Home
  • I will be happy to help you out with your flat towing needs. The first thing you are going to want to do is consult the owners manual for your 1992 Geo Tracker. There should be information in the towing section or look for recreational towing in the index for more information on the specific procedure for your Tracker. The tow bar does not have a speed rating but the vehicle might. There are 5 items that will be needed to flat tow a vehicle: base plates, tow bar, safety cables, lighting,...
    view full answer...

  • Flat Towing Lighting Recommendation for a 1992 Geo Tracker
  • For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV. I also attached a link to all of our help articles on flat towing lighting as well.
    view full answer...

  • Finding Intermittent Ground Problem in Wiring of Trailer Towed By 1992 Geo Tracker
  • I'm still leaning toward a insufficient ground connection as being the cause of the problem you're describing. To confirm it, you'll need length of wire long enough to reach from your ground connection on the trailer tongue to the negative battery terminal on the vehicle. If connecting the wire to the wire to the negative battery terminal fixes the problem, you've pretty much confirmed a poor ground as being the issue. I'd also check the spot on the tow vehicle where the # C56175 grounds....
    view full answer...

  • What Parts are Needed to Use a Tow Ready Tow Bar with Roadmaster Base Plates on a 1992 Geo Tracker
  • In order to attach the Tow Ready Tow Bar, # 63180, to your Roadmaster base plates, you will need the Roadmaster Base Plate to Tow Ready Tow Bar Adapter, # RM-025. This will allow the two different parts to work together. The Roadmaster Quick Disconnect Tow Bar Base Assembly, # 910021-00, is for Roadmaster tow bars so it should not be needed, just the adapter and tow bar listed above. I have included a link to the installation details for the tow bar for you. Keep in mind that the...
    view full answer...

  • Trailer Hitch Receiver and Wiring Harness to Fit a 1992 Geo Metro Convertible
  • Yes, I confirmed with Curt that the # C11626 trailer hitch receiver will fit the convertible model of the 1992 Geo Metro. To tow a trailer you'll need a way to power its lights. Use # HM48925 for a 4-way trailer connector on the back of the Metro. For a hitch ball that fits the trailer hitch receiver use # 19258 for a 2 inch or # 19256 for a 1-7/8 inch.
    view full answer...

  • Snowplow Mounting Kit for 1992 Geo Tracker
  • The Custom Mounting Bracket Kit for SnowBear Hydraulic and Winter Wolf Snowplows # SB397-050 does have mounting holes, but is a confirmed fit for your 1992 Geo Tracker. This bracket kit is designed to fit a SnowBear Winter Wolf Snowplow such as # SB324-166.
    view full answer...

  • Mount Kit Recommendation for SnowBear WinterWolf Plow on 1992 Geo Tracker
  • The correct mount kit for your 1992 Geo Tracker to use your Snowbear Plow part # SB324-167 is the part # SB397-050 that you referenced. This kit is custom fit for your vehicle and is designed to work with the Winter Wolf as well.
    view full answer...

  • Parts Needed to Flat Tow a 1992 Geo Tracker 2-Door 4x4 Behind an RV
  • Yes, Roadmaster base plates # 118-3 will fit your 1992 Geo Tracker 2-door 4x4. For a compatible tow bar I recommend the Falcon 2 # RM-520. I have linked a video review of this tow bar for you. For safety cables I recommend # RM-643. The coiled design helps keep the cables off of the ground. For lighting you can use a simple kit such as # EZT20B or a magnetic kit # C-ATL20A. Both of these kits bypass the Tracker wiring so you won't have to splice into the tail light wiring. You may...
    view full answer...

  • Use Circuit Tester to Find Wire Functions to Install Trailer Wiring Harness on 1992 Geo Tracker
  • Hardwire trailer wiring harnesses such as # C56175 will require using a circuit tester such as # ALL640595 to determine the functions of the tail light wires on your 1992 Geo Tracker. You could also use # 119178KIT which comes with a little circuit tester. On these harnesses the red wire is for brake lights, yellow is for left turn, green is for right turn, brown is for tail lights, and white is ground. After you verify the functions of the wires on your Tracker installation will be easy!
    view full answer...

  • Comparing the Black Diamond and Black Denim Soft Tops for a 1992 Geo Tracker
  • The Rampage Replacement Soft Top Fabric part # RA98735 (Black Diamond) and the Rampage Replacement Soft Top Fabric part # RA98715 (Black Denim) are both made of the same fabric but woven a little differently. The black diamond as the name states has a diamond pattern whereas the black denim has a denim pattern like that on your jeans. I have attached a photo that shows the two samples side by side for you as well.
    view full answer...

About Us
photos and videos

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.


Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.