Suspension Enhancement

change make

Select Vehicle Model

  
Suspension Enhancement

Available Models for 1992 Mazda Suspension Enhancement


Suspension Enhancement

We offer a complete selection of both rubber spring and air ride suspension enhancement systems from Firestone, Air Lift, Super Springs, and Timbren. These kits are custom fit to your vehicle for an easy installation. They can offer either a progressive suspension enhancement or an adjustable level of suspension depending on your system and the types of loads you carry.

View the complete list of suspension enhancement systems by entering the year, make, and model of your vehicle to the left.







Suspension Accessories



Accessories



1992 Mazda Questions and Answers


  • Wiring a 1992 Mazda B2600 With a 4-Way Trailer Wiring Harness
  • Your 1992 Mazda has a 5 wire system and the trailer has a 4 wire system. If you do not have a 4-Way trailer connector on the truck you will need to install one. The 4-Pole Hardwire Kit with Converter, item # 119178KIT will convert the vehicles 5 wire system down to a 4 wire system for trailer lighting. You will need to identify the tail light circuits on the vehicle with a circuit tester, item # 3808 if needed. Once you have the proper circuits identified you will connect the white wire...
    view full answer...

  • Is the Falcon 5250 Tow Bar Compatible with Roadmaster Standard/Classic Base Plates
  • I spoke with my contact at Roadmaster to confirm and the Standard Base Plate Kit, # 702-1, is compatible with the Roadmaster Falcon 5250 tow bar. The Falcon 5250 tow bar is no longer made and was replaced by the Falcon # RM-522 and Falcon 2, # RM-520.
    view full answer...

  • What Base Plates for a 1992 Mazda B2200 Truck Are Compatible with a Falcon 2 Tow Bar
  • If your 1992 Mazda B2200 is 2 wheel drive, you can us the Roadmaster Base Plates, # 702-1, that you have referenced. These base plates are compatible with the Falcon 2 Tow Bar. If the truck is 4 wheel drive, you will need to use Blue Ox Base Plates, # BX2507. To use the Falcon 2 tow bar with the Blue Ox base plates, you would need to use adapter # RM-031. With the base plates and tow bar covered, you will just need safety cables, a lighting solution, and supplemental braking. For...
    view full answer...

  • Which Platform Bike Rack for a 1992 Mazda Miata with a DaLan Class I Hitch
  • The Curt receiver, part # C11729, on your Miata is a Class I hitch, so you would need to choose a bike rack that will fit a Class I hitch. All of these bike racks will fit a Class I, so you are OK on that front. The rise from the top of the shank to the bottom edge of the platform is right at 3 inches on the SportRack, pretty much the same as the Swagmans. I would recommend either of the Swagman racks, the XC2 part # S64650 or the XTC2 part # S64670, over the SportRack. The SportRack...
    view full answer...

  • How Would a Blue Ox Brake System Work On a 1992 Mazda B2200 Truck
  • The Blue Ox Patriot Brake Control System # BRK2010 will sit in the floorboards of your 1992 Mazda B2200 and will sense the amount of braking being applied by the tow vehicle, and will apply pressure to the brake pedal of your B2200 in proportion to that. Check out the video I attached. In order to determine if your vehicle is flat-towable you will need to consult the owners manual of your vehicle to see if there are any restrictions or recommendations like axle disconnects or transmission...
    view full answer...

  • Does the Blue Ox Tail Light Wiring Kit with Block Diode # BX8811 Come With a 4-Way Connector
  • The Blue Ox Tail Light Wiring Kit with Block Diode # BX8811 that you referenced does not come with a 4-Way connector as you stated. To add a 4-Way connector you can simply use the Hopkins Wiring Harness with 4-Pole Flat Trailer Connector # HM38138 and connect it to your current wiring using Butt Connectors # DW05744-5. For a look that is a little more clean and will provide you with a 7-Way to connect to your RV you can use the Hopkins Nite-Glow Tow Bar Extension Cord w/ Socket -...
    view full answer...

  • Base Plate Kit Recommendation for Flat Towing 1992 Mazda Miata
  • We do sell a base plate kit for a 1992 Mazda Miata. For that you would want the part # 711-4 which is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground. For lighting you can use the diode kit, # RM-15267, and...
    view full answer...

  • Trunk Mount Bike Rack Recommendations for 1992 Mazda Miata
  • The Thule Passage 2 Bike Model, part # TH910XT would be a fit for your Miata. The rack is definitely a no-frills option, but Thule makes an excellent product and this rack would work great for you. The top of the line option would be the Thule Raceway, part # TH9001PRO. Rather than the difficult to use straps and buckles used by other racks (including the Passage) the Raceway uses 4 retractable cables that allow the rack to be installed or removed in seconds without having to fiddle...
    view full answer...

  • Will The Curt Class II Trailer Hitch Receiver # C12303 Fit Both 2WD And 4WD Trucks?
  • Yes. The Curt Trailer Hitch Receiver Class II - 1-1/4", # C12303, will fit either 2WD or 4WD vehicles. The hitch receiver is ideal for light-duty towing and is a bolt on installation. It is powder coated for durability and comes with the pin and clip for your ball mount to accessories. If you will be towing with this hitch receiver, I recommend the Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs, # C45521. You will also need a 1-7/8 inch hitch ball like...
    view full answer...





^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.