Menu Icon

Jeep Seats

change make

Select Vehicle Model

  
Jeep Seats

Available Models for 1988 Jeep Jeep Seats


Jeep Seats

Need to replace a damaged seat or upgrade for a more comfortable ride? We offer a full line of seats from Bestop that are made of premium materials in colors that will match your Jeep.

View the complete list of seats by entering your year, make, and model to the left.



Accessories



1988 Jeep Questions and Answers


  • Driver and Passenger Replacement Seats for a 1988 Jeep YJ from Bestop
  • The passenger seat that is compatible with the Bestop TrailMax II Pro Driver Seat that you referenced is the Bestop TrailMax II Pro Passenger Seat, # B3946015. These seats are also available in a vinyl material as part # B3945015, for the passenger seat and # B3945115 for the driver seat. If you no longer have the seat riser or slider, then you will also want to pick up a replacement seat riser, # B51254, and the seat slider, # B51255. For the rear bench seat, you will want to look...
    view full answer...

  • Parts Need to Flat Tow a 1988 Jeep Cherokee Behind an RV
  • To flat tow your 1988 Jeep Cherokee behind an RV you will need 5 items. First, you will need base plates. The Roadmaster Standard Base Plates, # 1401-1, that you have referenced is a good choice. Next, you will need a compatible tow bar. There are a few options but the most popular is the Falcon 2, # RM-520. I have included a link to the installation details and a video review of this tow bar for you to view. Third, you will need safety cables. I recommend the RoadMaster 68 Inch Single...
    view full answer...

  • Transmission Cooler Hose Fittings for a 1988 Jeep Cherokee with 4.0L and Automatic Transmission
  • There is a difference between the Derale Radiator Adapter Fittings, # D13028, and 1987-Current Jeep OEM Custom Transmission Cooler Fitting Kit, # HH41412. Basically, the first ones are aftermarket fittings that do not follow the same design as the original factory fittings. On the other hand, Hidden Hitch part does follow the design of the factory fittings. If you look closely, you will notice that the 5/8 diameter described by the Hidden Hitch part, # HH41412, is the outside diameter...
    view full answer...

  • Can I Flat-Tow My 1995 Jeep Wrangler w/ Aftermarket Front Bumper
  • The item you selected, Roadmaster Classic Base Plate Kit, part # 1409-1, will fit 1987-1995 Jeeps with a u-channel bumper only. You would need to install a factory u-channel bumper on your Jeep to attach a base plate kit. The Roadmaster Base Plate # 1409-1 attaches to the bumper of the Jeep Wrangler which is why the u-channel bumper is required. We do not have a base plate kit available that will work with an aftermarket bumper on your Jeep Wrangler. There are quick disconnects available...
    view full answer...

  • Recommended Light Bar for 1988 Jeep Cherokee
  • For a gutter mount light bar you can get the Carr C-Profile Rota Light Mounting Bar # CARR210111. This bar rotates 90 degrees forward to help with clearance or just to make the lights more low profile. There isn't a way to curve the bar since you would just be bending metal and then it wouldn't fit into your rain-gutters or hold the lights properly. For ideas of lights to use on the bar the Westin Driving Lights # 09-0205 is a 7 inch round light or the Putco High Power Luminux Off-Road...
    view full answer...

  • Installing a 4-Way Trailer Connector on a 1988 Jeep Wrangler
  • The T-One wiring harness, part # 118356, is designed to fit newer Jeep Wranglers starting in 1991 but is not a confirmed fit on your 1988. The wiring harness for your Jeep is a hardwire and I recommend using part # 18252. It includes a circuit tester to find the correct circuits on the Jeep, as well as quick splice connectors to make splicing in a lot easier. I've linked a video of the harness being installed on a 1985 Monte Carlo SS (Because why not, right?) so you can see the process...
    view full answer...

  • Tow Bar Light Kit Recommendation for a 1988 Jeep Wrangler
  • For tow bar lighting for your 1988 Jeep Wrangler you can use the bulb and socket kit, # RM-155, and not have to worry about cutting and splicing into the vehicle wiring. You will also want the # BX88206 to connect this lighting solution to your tow vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
    view full answer...

  • Roadmaster Base Plate Recommendation for a 1998 Jeep Grand Cherokee
  • Yes, the Roadmaster Classic Base Plate Kit # 1411-1 that you referenced is confirmed to fit your 1998 Jeep Grand Cherokee. To safely flat tow a vehicle there are several components needed. The first is the base plate kit which we have already picked out. Next, you will need a set of tow bars. For that I recommend you get a RoadMaster Sterling All Terrain Tow Bar # RM-576. This tow bar comes with quick-disconnects, safety cables and wiring run for lighting. The next component you will...
    view full answer...

  • 4-Way Trailer Wiring Harness Recommendation for 1988 Jeep Wrangler
  • The only trailer wiring option we have for your 1988 Jeep Wrangler will be a hardwire kit like the Tekonsha part # 18252.
    view full answer...

  • Draw-Tite Weight Distribution System N3201 Compatibility with Surge Brakes
  • I spoke with my contact at Cequent and he confirmed that you can use the Draw-Tite N3201 Weight Distribution System with your boat trailer with surge brakes, however the heavier the trailer the less effective the braking will be. When setting up your system you will want to make sure you have at least 6 links in the chain supporting the cams and the trunnion bars so the bars can move more freely. I also recommend you check the trailer and/or surge brake operating instructions for...
    view full answer...

  • Parts Needed to Flat Tow a 1988 Jeep Cherokee Behind a RV
  • Before attempting to flat tow your 1988 Jeep Cherokee behind your RV, I strongly recommend checking your owners manual or with a local Jeep dealer to make sure your Jeep is flat towable. Some vehicles are not recommended to flat tow because the transmission could be damaged. If you determine you can flat tow your Cherokee, then you will need 5 basic towing components. First you will need a set of base plates. Base plates are vehicle specific and provide an attachment point for a tow...
    view full answer...

  • Ceiling Garnish for 2012 Lance 865 Roof Vent With Height Under 1-1/2 Inches
  • We do carry a pair of ceiling garnishes which may work for you, though they are designed for Ventline roof vents. Each has an opening which is roughly 14-1/4" wide x 14-1/4" long and a leg length of 1-1/8" with the only differences between the two being the colors. Garnish # VA0445-25 is Birch White while garnish # VA0445-33 is Polar White. I've added a link to a video review of one of the garnishes for you to take a look at.
    view full answer...

  • Can Self-Adjusting Brakes be Added to a 1973 Hi-Plains Trailer
  • That is what we would call a vintage axle but as far as the brand and other information I couldn't say. The max drum diameter makes me believe that it would take 10 x 2-1/4 inch brakes. But to be sure it is best to pull off a drum and measure the inner diameter and the width where the shoes would make contact with the drum (see picture). Also check for a brake mounting flange welded to the axle. If not present they will have to be added by a professional welder with experience and the...
    view full answer...

  • Blue Ox Tow Bar and Base Plate Kit Recommendation for a 1988 Jeep Cherokee
  • The correct base plate kit for your 1988 Jeep Cherokee that would work with the Blue Ox Alpha Tow Bar # BX7365 would be the Blue Ox Base Plate Kit # BX1110. With the proper tools this install would be something that you could do yourself. I will email you a copy of the installation instructions for this product for you to check out. The # BX1110 is also confirmed to work with the # BX7365. I did some checking and it looks like if your vehicle is 4WD then your vehicle is tow-able as-is....
    view full answer...

  • Hitch and Bike Rack Recommendation for 1988 Jeep Wagoneer
  • If you need a hitch for your 1988 Jeep Wagoneer the Draw Tite hitch part # 75054 that you mentioned is a confirmed fit and would be a great hitch for carrying a bike rack. The best bike rack for you will depend on a few things like your budget, how many bikes you plan to carry, do you prefer lightweight to easy to load/unload, etc. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Thule Roadway 2 part # TH912XTR. We asked our demo and install guys...
    view full answer...

  • Replacement Landing Gear Legs Needed for a 2004 Arctic Fox 29.5E 5th Wheel Trailer
  • I can give you some information to help you determine if the Lead # LC179013 and Follow # LC179014 legs will fit your 2004 Arctic Fox 29.5E 5th wheel, but we don't really have a database to pull from when it comes to OEM part numbers on trailers. Both legs have an overall height of 32" with an outer tube width of 2-1/2" and an inner tube width of 2-1/4". The total travel distance is 21" with a 16" drop leg travel. To determine if these will fit directly to the brackets that you currently...
    view full answer...

  • Available Colors of Bestop Replacement Jeep Seats for 1988 Jeep Wrangler
  • The Bestop TrailMax II Fixed High Back seats are available in Spice, Charcoal, Black and Black Denim. You can see all of the available seats by clicking on the provided link. The seats are designed to be installed on the OE seat riser.
    view full answer...

  • How to Install the Blue Ox Patriot II Radio Frequency Part # BRK2016 in a 1988 Jeep YJ
  • I have attached the installation instruction of the Blue Ox Patriot II Radio Frequency part # BRK2016 for you but as we have yet to fit this braking system on a 1988 Jeep YJ yet, it would be difficult for me to provide exact instructions however, this system is a confirmed fit for your vehicle. When installing the Blue Ox Patriot II, it is always a good idea to use a seat stiffener like part # BRK2503. The seat stiffener provides a larger surface area on the seat for the braking system...
    view full answer...

  • Are Bestop TrailMaxx II Jeep Seats Full Height
  • The Bestop TrailMax II High Back Seat you mentioned, part # B3943615 is a full height seat, as opposed to the low back seats you currently have. The seat is designed to fit over the original seat's riser and for your particular model year, no adapter would be required. The matching rear seat would be the TrailMax II fold and tumble in Black Denim, part # B3944015.
    view full answer...

  • Crossbar to Install Detail K2 Snowplow on 1988 Jeep Wrangler
  • Yes, the crossbar you see pictured in the install instructions for the brackets # K284115 is included with the plow, # K2RAMP8219.
    view full answer...





^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.