fall hauling headquarters

Roof Rack

Change Make

Select Vehicle Model

  
Roof Rack

Available Models for 1995 Chevrolet Roof Rack


Roof Racks

Get all the room you need inside your car by putting your bikes, cargo or kayak on your rooftop. Thule, Yakima, Rhino Rack and Rola roof racks are built to the highest quality specifications to accommodate all your cargo needs.

Thule, Yakima and Rhino Rack offer roof bike racks in the traditional fork mount style or in the easy to load, wheel mount style.

Cargo baskets from Rola, Rhino Rack, Yakima and Thule offer a great looking way to get your cargo out of your vehicle and safely carry it on your trip. Roof cargo bags and roof boxes can also be used if you would like some waterproof or water resistant protection for your cargo.

If you need to carry bulky skis, snowboards, kayak or a canoe, putting it on the roof is a great option to unclutter your vehicle and keep the gear safe. We offer Yakima and Thule ski racks and watersport carriers that are sturdy and safe for all your cargo needs.





Roof Top Cargo Racks and Carriers

We offer custom fit roof racks from Thule, Yakima, Rhino Rack, Rola, Inno and Whispbar that will be a perfect fit for your vehicle. Just enter your year make and model above. We also offer a full line of roof rack accessories, including roof bike racks, roof cargo baskets, roof cargo boxes, kayak and canoe carriers, roof bags, ski racks and snowboard racks. If you need to do some roof rack repairs, we also carry replacement parts for all the roof and cargo racks.


Roof Rack Accessories



Roof Rack Manufacturers



Accessories



1995 Chevrolet Questions and Answers


  • 7-Way, Vehicle End, Trailer Connector Wiring Diagram
  • See the picture to the right for a wiring diagram of seven-way vehicle end trailer connector. If you click on it you can enlarge it. I have also included a trailer wiring FAQ page for you to check out.
    view full answer...

  • How to Measure a Trailer Wheel to Fit a Baby Moon Center Cap
  • The measurement that you will want to take is the outer diameter of the inner ring and the outer diameter of the inner ring with one of the tabs (see photo). You will also want to count the bolt holes on the wheel and know the wheel diameter. The Baby Moon Center Cap, # AM90086, will fit 13 inch, 14 inch, or 15 inch 5-lug conventional steel wheels. The outer diameter of the inner ring should be 9 inches and the outer diameter of the inner ring with one of the tabs should be 9-1/4 inches....
    view full answer...

  • Brake Controller and 7-Way Trailer Connector For 1995 Chevy C/K 1500
  • As a first step, you would need to select a brake controller. I would recommend the Tekonsha Prodigy P2, part # 90885. The P2 is extremely reliable and easy to use, which makes it one of our all-time best selling brake controllers. Most of the Chevy trucks of that era had a blue and an orange or red wire ran along the frame rail for installing the controller. At the rear of the vehicle, they usually terminate on the end of the drivers side frame rail or above the spare tire. In the engine...
    view full answer...

  • What is Amperage Draw of Lightest Duty Winch
  • The lightest duty winch we carry is Superwinch EX1, part # SW1110. It has a 1,000 pounds capacity, runs on 12V DC, and draws 25 amps with no load, and draws 60 amps with a 500 pound load, and 92 amps with a 1,000 pound load.
    view full answer...

  • How to Stop Corrosion in The 7-Way RV Style Connector
  • Your best bet to eliminate corrosion in your 7-way connector is to use some Dielectric Grease for Electrical Connectors, item # 11755. Use this on the wiring connectors inside the connector when installing the connector and occasionally on the connection between the truck and trailer and your corrosion issues will be behind you. The corrosion you are experiencing is from moisture in the air and is prevelent with the RV connectors. The presence of constant 12 volt power creates an atmosphere...
    view full answer...

  • What is the Towing Capacity of a 1995 Chevy C/K Series 3500 with 454 Motor
  • I found a document from GM that covers the towing and other capacities of the full line of 1995 pickup trucks. For your 3500 with the 454 motor and a gooseneck trailer the capacity appears to be 13,000 pounds for a 2-wheel drive dually or 10,000 pounds for single rear wheels. If you have a 4x4 the capacities are lower 10,000 for single wheels but 12,500 for duallies. Provided that you stay within the truck's capacity then it can tow the trailer.
    view full answer...

  • Brake Controller Install on 1995 Chevy C Series Pickup Truck
  • The Blue and Orange (or Red) wires are meant to carry the 12-v accessory power and the brake control output to the 7-way installed at the rear. The wires terminate in the engine compartment under the master cylinder. The red wire would be lengthened and connected to the positive battery terminal via a 40 amp breaker included with the # ETBC7 kit and the blue wire would be extended through the firewall and connect to the blue output wire of the brake controller. The black brake controller...
    view full answer...

  • Motorhome Brake Control Install
  • Brake controllers are not vehicle specific items so there are not diagrams available for individual vehicles. We do have a help page on installing brake controllers that will walk you through the process, but I will briefly run through the process to give you an idea of what has to be done. Most brake controllers have 4-Wires, typically they are: blue, black, red and white. The white wire is a ground, so it needs to be connected to any solid ground point. The red wire is the stop light...
    view full answer...

  • What Does PC Rated Mean On The Optronics Trailer Lights, # AL82AB
  • PC rated means that the light is viewable from a 90 degree angle. Most other lights are considered to be viewable from a 45 degree angle. On the Optronics Trailer Lights, # AL82AB, this light will function as both a clearance and side marker light if mounted at a 45 degree angle. Just mounting the light on the side of your over 80 inch wide trailer will not allow it to be both a clearance and side marker light, because the light will not be seen at the front or back of the vehicle. To...
    view full answer...

  • Wire Functions on Trailer Connector on a 1995 Chevy Suburban
  • The likely functions of the wires on your 1995 Chevy Suburban are yellow for left turn and brake lights, green for right turn and brake lights, black (or brown) for running lights, and white for ground. But to be sure I highly recommend testing the wires using a circuit tester such as # 3808. After you have verified the functions of the wires you can use the picture I have included showing the functions and positions on a 7-Way vehicle side connector. Ignore the colors in the picture...
    view full answer...

  • Finding the Stop Light Switch Wire for Installing a Brake Controller on a 1995 Chevy C/K Pickup
  • You will need to use a circuit tester, like part # 40376, to test the wires under your dash. That is where your stoplight switch is located. We have a video of a 1993 Chevy Suburban being fitted with a brake controller. Start at the 7:20 time mark on the video and you can see where our installer locates the wire. You should find the wire in a similar location, but use a circuit tester to verify.
    view full answer...

  • Hard Wiring Trailer Lights on 1995 Chevrolet Astro Van
  • To wire your 1995 Chevrolet Astro Van you will need to access the vehicle taillight wiring either by removing the taillights themselves or by removing an interior panel to access the wiring. Once you have access to the wiring you will need to use a circuit tester, item # 40376, to test the wiring and splice the proper wiring from the trailer connector, item # 18002, into the taillight wiring. The wiring on the connector is as follows. Yellow is left turn/brake light, green is right turn/brake...
    view full answer...

  • Bearing Kit Recommendation for 84 Spindle K71-717-00
  • The Dexter bearing kit part number K71-717-00 that you referenced is the bearing kit for a number 84 spindle. Our part number for that bearing kit is # BK2-100.
    view full answer...

  • Bolt Torque to Attach Reese 16K RP30047 5th Wheel Hitch Head to Legs
  • I checked with Reese and when attaching the 16K head and cross member to the legs you will need to torque the 1/2 inch by 4-1/2 inch bolts to 75 foot pounds. If you need a torque wrench you can go with an economical option, # PTW3001C, or something a little more robust such as # ALL944001.
    view full answer...

  • Pros and Cons of Running Two Inflation Valves or One in Air Bag Suspension Kit on Vehicle
  • The biggest pro to using one valve stem to maintain air pressure in an air bag kit is that you always know that both bags will have an equal amount of pressure in them. If you have an application where equal pressure on both sides is always the norm then that makes things simpler. Plus you only have to drill a hole for one valve instead of two on your vehicle. The only real advantage to having two is that if you do need different pressures in either side you would be able to with that...
    view full answer...

  • Procedure and Parts Needed for Brake Controller Install on 1995 Chevy Tahoe
  • GM did not start equipping their trucks with the plug-in connector until the 1999 model year Silverado/Sierra. In some of the mid to late 1990s models, GM provided what could best be called a rudimentary tow package, with a blue and a red or an orange wire ran from below the master cylinder, under the cab and along the drivers side frame rail to terminate on the frame rail behind the rear wheel. Because of the age of the vehicle, the ends of the wires are usually pretty hard to find,...
    view full answer...

  • Brake Lights Stopped Working 1995 Chevy C/K Series Pickup Truck
  • If the brake lights are not working on the truck, try checking the brake light fuse if you have not done so already. The owners manual for the truck should tell you where it is located. If the brake lights are not working on the trailer side but you have power to the 4-Way on all circuits on the truck side, there is probably a bad ground, loose or broken connection, between the trailer connector and the tail lights. First, check the connectors on both sides for dirt and corrosion...
    view full answer...

  • Trailer Wiring Harness Installation For a 1995 Chevrolet S-10 Pickup
  • If you have the bare wires that are connected to the vehicle lighting circuits, but just need the 4-Way connector, then you can use the Draw-Tite 4-Way Hardwire Kit, part # 18252, that you have referenced. This will tap into your loose wires and give you a 4-Way connector on the rear of your vehicle. To add a complete wiring harness and 4-Way trailer connector, you would need Tow Ready Custom Fit Vehicle Wiring, # 118312. I have included a link to the installation details below. To...
    view full answer...

  • Recommended Tool Box for 1995 Chevy S-10 Pick Up
  • I'd recommend the DeeZee Red Label Crossover-Style Truck Bed Toolbox, part # DZ8160. The box features a rugged, bright aluminum diamond-plate finish and has a 7.1 cubic foot capacity, which is the largest capacity they offer for that particular truck. The base of the box (the portion that fits between the sides of the bed) measures 51 inches wide, which means it'll fit perfectly as long as the truck doesn't have a stepside bed. According to my research, the standard bed of a 1995...
    view full answer...

  • What are the Hole Dimensions for the #A70GB, Rubber Grommet for 6-1/2 Inch Oval Trailer Light
  • I went out into our warehouse and measured one of our Rubber Grommet for 6-1/2 inch Oval Trailer Light, # A70GB, that we have in stock. From the measurements I took, you will have to cut a hole that is 6-11/16 inches long and 2-5/8 inches tall.
    view full answer...

  • Will Timbren System # TGMFK35C Fit 1995 Chevrolet Tahoe With Torsion Bar Front Suspension
  • The Timbren Front Suspension Enhancement System, part # TGMFK35C, will fit your 1995 Chevrolet Tahoe 4WD with torsion bar front suspension. The Timbren rubber springs will install in place of your factory bump stop. You will want to make sure that the suspension on your vehicle is in good working order before installing the Timbren kit. The Timbren kit is designed to work on vehicles with a snow plow. The rubber springs will raise the front of the end of the Tahoe when heavy equipment,...
    view full answer...

  • Parts Needed to Flat Tow a 1995 Chevy Pickup Truck Behind a Motor Home
  • Normally what you would do is check the vehicle owners manual to determine if the vehicle can be flat towed. I checked a copy of the manual online but there were no references to recreational towing that I could find. Only emergency towing guidelines. If you get the go ahead from Chevy to flat tow the truck then there are 5 items you will need to flat tow it: base plates, tow bar, safety cables, lighting, and supplemental braking. For base plates there are several options depending...
    view full answer...

  • Should My Tekonsha PRIMUS IQ Brake Controller # TK90160 Always Have Constant Power
  • The brake controller needs to be connected to a constant power source so that the settings on the brake controller are not lost. When the brake controller is unplugged, the brake controller is reset and needs to be setup again. Having constant power to the brake controller is the correct way to have the brake controller wired on your 1995 Chevrolet Silverado and on any vehicle. You will not have to worry about the brake controller draining your battery as it draws milliamps of power....
    view full answer...

  • Brake Controller Wiring Identificatin on a 1995 Chevy 2500
  • The wire from the cold side of the brake switch is what you are looking for. This wire is white, bundled next to an orange wire, under the dash, located above the brake pedal. Using a circuit tester, like part # 40376, make sure you have the wire that only has voltage when the brake pedal is pressed. I would also recommend you check the rest of the connections on your brake controller. Make sure you have 12v going in on the black wire, 12v exiting on the blue wire, and make sure your...
    view full answer...

  • Dimensions for Buyers Product Wiring Junction Box # 3375601101
  • The Buyers Products Trailer Wiring Junction Box # 3375601101 referenced in your question measures 6.5 inches long, 3.21 inches wide, and 2.5 inches tall when the cover is installed. The mounting holes at each end are spaced apart 7.38 inches on center. I have attached an image to assist.
    view full answer...

  • How To Mount Redline Rear Hanger # 30-20 On A Trailer
  • On the Redline Rear Hanger, part # 30-20, the hanger has top stamped into one of the sides of the hanger. The hanger is welded to the trailer with the side marked top, facing the outside of the trailer with the word top showing. I am including a picture of the hangar that shows the top marking and how it is positioned on the trailer.
    view full answer...

  • Air Bag Helper Springs for a 1995 Chevy Suburban 1500 4x4
  • We have air bag help springs for the rear axle of your 1995 Chevy Suburban K1500 but there are no options for the front. But there are other options we can use for the front. Starting with the front you can use Timbren springs # TGMFK35C. These will be easier to install than air bags and require no maintenance. The front of the vehicle usually stays pretty constant in terms of ride height and the amount of weight at the front so the fixed Timbren springs are ideal. For the rear axle...
    view full answer...

  • Recommended 5th Wheel Trailer Hitch for a 1995 Chevrolet C2500 Turbo Diesel
  • According to my research, the 1995 Chevrolet C2500 models had a towing capacity of 10000lbs, but you will want to check with a dealer to confirm this. If your truck has a 6-1/2 foot bed, I would recommend the Pro Series 15k fifth-wheel trailer hitch # PS30094, which includes a slider unit. Short bed trucks require a hitch with a slider to get the necessary clearance for tight turns. If your truck has an 8 foot bed, you would not need a hitch with a slider. In this case, I would...
    view full answer...

  • What C Channel Trailer Frame Size Will the Reese Round Bar Strait-Line Hitch with Shank Work On
  • The Reese Round Bar Strait-Line Hitch with Shank, item # 66088, lift up brackets will not fit channel frames wider than 2-1/4 inches. As long as your C-Channel frame is no wider than 2-1/4 inches you should not have any problems with the installation. Along with this system you will need a properly sized and rated hitch ball with a 1-1/4 inch shank. I have listed a couple that may work for you below. Hitch Ball with 2-5/16 inch Diameter and Medium Shank, 12,000 lbs GTW - Chrome,...
    view full answer...

  • What Is The Purpose Of 12V Power On Trailer Connector For Fifth Wheel Trailer
  • The 12V power pin on the 7-way connector for your fifth wheel is used for maintaining a charge on the trailer battery or auxilliary power. I have attached a helpful article that explains what each of the wires on a trailer connector functions are you can check out.
    view full answer...





^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.