shop gifts
shop gifts

Gooseneck Hitch

Change Make

Select Vehicle Model

  
Gooseneck Hitch

Available Models for 2007 Toyota Gooseneck Hitch


Gooseneck Trailer Hitch

Haul your heavy loads with peace of mind using a gooseneck hitch by popular manufacturers like B&W, Draw-Tite, Hidden Hitch, Reese, Curt, and Blue Ox. Install a Remove-a-Ball, fold down, or Hide-a-Goose hitch in the bed of your truck and retain full use of the bed when not towing. Or, maximize your hauling versatility with a rail-mounted gooseneck hitch and switch easily between gooseneck and fifth wheel towing.

You can find custom installation kits for your vehicle by entering the year, make, and model on the left. We offer kits for popular vehicle manufacturers like Ford, Chevrolet, Dodge, Nissan, and GMC. Also use the fit guide to find a custom fit or universal in-bed rail kit to install a rail-mounted gooseneck hitch.



Gooseneck Trailer Hitches

We offer many styles of top quality gooseneck trailer hitches, installation kits, adapters and accessories. They come from the best manufacturers like Draw-Tite, Reese, Bulldog, Blue Ox, Curt, Convert-A-Ball, and Colibert. There is also a how-to section of frequently asked questions, gooseneck hitch information, and installation tipsmore information.


Gooseneck Trailer Hitch Accessories



Gooseneck Hitch Manufacturers



Accessories



2007 Toyota Questions and Answers


  • Running Light Fuse Keeps Blowing Even with Trailer Running Lights Disconnected
  • You have a short circuit somewhere that is causing the fuse to blow. To determine where the short is start by disconnecting the trailer from the tow vehicle. Replace the fuse and then use a circuit tester such as # ALL640595 to test the vehicle side trailer connector while someone sits in the vehicle and turns on the running lights. If it shows power and the fuse does not blow then the issue is on the trailer. If it does blow the fuse then the issue is on the vehicle. Likely causes...
    view full answer...

  • Replacement Trailer Tires for 15 Inch Wheels to replace 7.00-15 Tire Size On A 15X5.5 Wheel
  • The Karrier ST205/75R15 Radial Trailer Tire, # AM10244, will fit on a 15x5.5 inch wheel. It has a maximum load rating of 1,820 lbs. at 50 psi and an overall diameter of 27.3 inches. The overall width is 8.1 inches. I would not recommend installing the Karrier ST225/75R15 Radial Trailer Tire, # AM10256, on a rim width of 5.5 inches. The minimum rim width for that size tire is 6 inches. If you try to squeeze that size tire on a narrower wheel than what is recommended, it will cause the...
    view full answer...

  • Can Larger Trailer Tires be Put on a Trailer with 4.80-12 Trailer Tires
  • You can potentially use new tires and wheels on your trailer as long as there is clearance all around the existing tires for the larger size. Going to a 13 inch like with # AM31985 you will need at least 1.8 inches clearance above the existing tires and 2.095 inches at the back between the trailer and tire for the wider size. Trailer tire and wheel combo # AM31985 is a radial tire with steel wheel, 5 on 4-1/2 bolt pattern. It is a load range D rated for 1,610 pounds at 65 psi. Please...
    view full answer...

  • Does a 2007 Toyota RAV4 Towing a 2000 lb Boat Need a Transmission Cooler
  • The Curt Class III receiver, part # 13509 is highly rated and would be a great choice for your Rav4. According to my research, the 2007 V6 is rated for 3500 lbs of towing when properly equipped. I would recommend checking your owners manual to confirm your towing capacity. To complete your towing system, you might need the following: Trailer wiring harness with 4-pole trailer connector # 118412 Ball mount, # 2923 2 inch trailer ball, # 19247 1-7/8 trailer ball, # 19260 A...
    view full answer...

  • What Bike Rack Would be Best for a Pop-Up Camper or Collapsible Trailer
  • Swagman has built several bike rack solutions specifically for the rear of Fifth Wheels, campers and trailers. Often times there is much more rear bumper bounce on a trailer or pop-up camper when compared to a passenger vehicle, so Swagman designed some bike racks to withstand the rougher ride. If the camper has a solid steel square tube bumper, you could use something like the Swagman Bumper Hitch, part # S64025 in conjunction with a towing bike rack like part # S64400. Swagman also...
    view full answer...

  • Using Thule # TH538XT Cable Lock with Thule Vertex Bike Rack
  • The Thule Vertex # TH9030XT does not feature an eye ring to run a cable lock like part # TH538XT through. In all but extreme cases, securing all four bikes together and making a wrap or two around the mast of the carrier would offer sufficient deterrence against theft. Keep in mind that the purpose of a lock is to keep honest folks honest. A determined thief will get what they want despite any precautions taken. The idea is to make the crook move on to easier pickings.
    view full answer...

  • Installing The Replacement Motor On The Solera Power Awning
  • The Solera Power Awning Replacement Motor # LC266149 does not have an installation video at this time. However, the installation is not difficult. Before removing the motor, you want to open the awning about 12 inches and support the arms. This will remove the spring tension in the awning roller for an easy removal. You disassemble the protective housing, remove the bolts that hold the motor in place and then disconnect the 2 wires. To install the new motor, you simply reverse the...
    view full answer...

  • When Extended Down How Far will the Thule Hullavator Be From the Top of the Cross Bars
  • I spoke to my contact at Thule and she informed me that when the Thule Hullavator Kayak Carrier part # TH898 that you referenced is extended down for kayak loading it will be 40 inches lower than the top of the roof rack crossbars. So that means if the top of your crossbars measures 67 inches from the ground that when the Hullavator is extended down the carrier will only be 27 inches from the ground. I asked my contact at Thule if your loading process would be okay and she stated that...
    view full answer...

  • Recommended Tire Chains For 265/65R17 Tires On 2007 Toyota Tacoma
  • Yes, we do carry tire chains for 265/65R17 Tires for your 2007 Toyota Tacoma. We have many different options, but I'll give you a few recommendations based on style. For the square link syle chains I recommend the Titan Chain Alloy Snow Tire Chains - Diamond Pattern - Square Link - 1 Pair, # TC2526. The design is a diamond-pattern to offer more tire coverace and increased traction as well as stopping power. They are made from manganese nickel alloy for a strong, durable, and rust...
    view full answer...

  • Replacement 7-Way Trailer Connector and Wiring Harness for a 2007 Toyota Tundra
  • We do have the Pollak 7- and 4-Pole Trailer Connector Socket, # HM40975, if it is just the plug part that is broken on your 2007 Toyota Tundra. If the wiring harness is damaged, you could use the 4 Foot Pigtail Wiring Harness, # PK11998, to replace the area that is broken. The wiring configuration for this harness can be found on the product page in the Specs section.
    view full answer...

  • Comparing the Thule Apex and Vertex Trailer Hitch Mount Bike Racks
  • The Thule Apex, # TH9025, comes with some additional features that the Vertex, # TH9029XT does not. The Apex includes the EasyMount system with an integrated locking hitch pin and tool-free anti-rattle device. The Apex also includes a built-in cable lock. The Vertex does not. The Apex has a premium silver finish and the Vertex is black. The Apex also comes with premium cradles with road-dampening technology for better bike protection when loaded on the rack. Both racks can tilt down,...
    view full answer...

  • Troubleshooting Trailer Brakes Grabbing and then Operating Normally with Hopkins Agility Controller
  • An easy way to eliminate the brake controller from the equation would be to borrow a friends and install it on your setup and see if the problem persists. If it does, the problem is elsewhere, if not then you know the your Hopkins Agility Controller # HM47294 is at fault. If borrowing another brake controller is not an option you could use a circuit tester like our # 40376 and test the brake output circuit with your trailer connected and see if there is a spike in voltage when you initially...
    view full answer...

  • Installing OEM Replacement 7-Way Trailer Connector on 2007 Toyota Tundra
  • The correct replacement 7-way for your Tundra should be part # HM43385. You can confirm this by examining the connectors under the truck that the connector would plug into. One connector should accept 4 pins, the other three pins. If your connectors are different, with one accepting 4 pins and the other 2 pins, you would need # HM11143395. The HM43385 fits 2003-2007 Tundra models, according to Hopkins. It is important that you check the existing connectors to ensure you get the correct...
    view full answer...

  • Recommended Trailer Hitch for 2007 Toyota 4Runner that Dpes Not Require Fascia Trimming
  • For your 2007 Toyota 4Runner, I recommend the Curt Trailer Hitch Receiver # 13445. This Class III hitch is confirmed to fit your vehicle, and unlike the Draw-Tite model that you referenced, you will not need to do any trimming or modifications on the rear bumper fascia during installation. This hitch will use existing holes in the vehicle's frame for a no-drill installation and provide you with a 2 inch receiver opening. I have included the complete written installation instructions...
    view full answer...

  • Comparison of Yakima MegaWarrior Roof Cargo Basket and Thule M.O.A.B. for a 2007 Toyota Sequoia
  • Both the Yakima MegaWarrior Roof Cargo Basket # Y07080, and the Thule M.O.A.B Roof Cargo Carrier # TH690, include the hardware needed to mount to crossbars. Since your 2007 Toyota Sequoia has factory cross bars it will mount right to them. Both carriers come complete, but the Yakima MegaWarrior has a few add-ons, that you may find useful, such as the Spare Tire Carrier, part # Y07076. There is also the Light Mounting Bracket, part # Y07075, the Hi-Lift Jack Mount, part # Y07077, and...
    view full answer...

  • Recommended Backup Camera for 2007 Toyota FJ cruiser
  • We offer all sorts of backup camera and warning systems for vehicles like your 2007 Toyota FJ Cruiser and since these products are not vehicle-specific you can select the camera system with just the features that best suit your needs. Some include visual guidance functions to assist with coupling a trailer while others are simply observation cameras. Some camera systems even work with your smartphone or tablet, such as the Rampage # RA7710. You can see all such items on the linked page. ...
    view full answer...

  • Replacement 7-Way and 4-Way Trailer Connector for a 2007 Toyota Tundra
  • We do have a replacement 7-way and 4-way trailer connector for the 2007 Toyota Tundra, but before we can determine which harness will work for your truck, we will need to know what type of plugs your trucks tow package wiring requires and how the connectors are wired. Unfortunately, Toyota decided to wire this truck a number of different ways. The Tundra had a generation change between 2006 and 2007 and this caused some discrepancies in the wiring. Your factory 4-way and 7-way trailer...
    view full answer...

  • What is the Towing Capacity for a 2007 Toyota FJ Cruiser
  • According to the owners manual for the 2007 Toyota FJ Cruiser the maximum towing capacity of the vehicle is 5,000 pounds so you would not be able to tow the tiny house with that particular vehicle. I recommend renting a 1-ton truck (Ford F-350, Chevy/GMC 3500, Ram 3500) but make sure to verify the towing capacity and tongue weight capacity with the rental agency before renting it.
    view full answer...

  • Which Replacement 4-Way and 7-Way Trailer Wiring Harness for a 2007 Toyota Tundra
  • The part you have selected, the Hopkins Tow Package Wiring Kit for Toyota Tundra, part # HM11143395, is specified for 2008 - 2010 Toyota Tundra trucks. This part has two grey connectors to couple with the factory wiring; one is a 2-wire rectangular connector and the other a 5-wire square connector. It will be a good idea to inspect the existing connectors on your Tundra to confirm the number of wires going to each so that you are certain of the replacement. Toyota did make some running...
    view full answer...

  • Which Trailer Wiring Harness for 2007 Toyota Highlander
  • The correct trailer wiring harness for your Highlander will depend on whether or not it is equipped with the tow package and the lighting set-up of the trailer you will be towing. If your Highlander has the tow package, and you will be towing a trailer with very basic lighting (one stop/turn/tail light per side) then the Tow Ready # 118248 would be a good choice. If your lighting is a bit more complex, you would need a harness with a higher rated converter like the Curt # C56107. If...
    view full answer...

  • Brake Controller Install Harness Location on a 2016 Toyota Tacoma
  • The brake controller install harness on your 2016 Toyota Tacoma can be hard to find but the part # 3031-P will fit it. If you check out the picture I attached you will see where a customer found the connectors in a Tacoma just like yours.
    view full answer...

  • Installing Brake Controller on 2007 Toyota Tundra Without Tow Package
  • I would be happy to help. The Tekonsha P3 brake controller you referenced would be an excellent choice for you. The P3 is extremely easy to use, and has controls that are intuitive and simple to understand. The diagnostic feature is unique in that any problems are indicated in plain English (or French or Spanish, if you prefer), instead of an error code that needs to be looked up. Even though your Tundra does not have the tow package, it might still be equipped with the brake controller...
    view full answer...

  • Does Trailer Hitch for a 2007 Toyota 4Runner Fit with a Spare Tire
  • You do not mention which hitch you are considering, but I will assume it is either the Hidden Hitch Class III, part # 70779 or the Draw Tite Class III, part # 75155. I have added a link to a copy of the installation instructions for that hitch. If you refer to Figure 2, the view you see is looking at the bottom of the bumper. The darkened corner of that tab is all that would need to be trimmed. The instructions for the 4 runner make no mention of the spare tire, so I would assume that...
    view full answer...

  • Trailer Hitch Recommendation for a 2007 Toyota Highlander Hybrid
  • For your 2007 Toyota Highlander Hybrid, I recommend the Draw-Tite Trailer Hitch # 75153. This is a Class III trailer hitch with a 2 inch receiver rated for 300 pounds tongue weight and 3,500 pounds gross trailer weight. I have included a link to the installation instructions and a link to a video showing a typical installation for you. If you plan on doing some towing I also recommend the etrailer Ball Mount Kit, # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip,...
    view full answer...

  • Installing 7-Way Trailer Connector on 2007 Toyota Tacoma
  • The Hopkins Multi-Tow trailer connector you referenced will fit a 2003-2007 Tundra, but not a Tacoma. If your Tacoma does not already have a functional 4-pole trailer connector like part # 118496, one will need to be added. From there, you can use a 4-pole to 7-way adapter # 37185. If your trailer does not have brakes and you do not need an accessory 12-volt circuit to provide power for any trailer mounted accessories that might need it, this set-up would work great for you. If your...
    view full answer...

  • Trailer Ball is Loose in Coupler
  • Some couplers can be adjusted so that the wedge will grab the trailer ball more tightly, but since the coupler you're using has no adjustment available, I'd first confirm that you are using the correct trailer ball size for your coupler. The required ball size for the coupler should be stamped into the metal on the top of the coupler. If you were using a 1-7/8 trailer ball with a coupler designed for a 2 inch ball, it would explain why the ball is loose in the coupler. If this is the case,...
    view full answer...

  • Replacement 7-Way Trailer Connector for a 2007 Toyota Tundra
  • From what I could find, the 2007 Toyota Tundra used a harness like the 2006 model, # 20137. However, the plugs in this replacement connector do not sound like what you are describing. What you are describing sounds like the harness for the 2008 to 2010 models, # HM11143395 that you have referenced. Also, for a 2007, I found that a harness like # 54701-004 will fit and it has connectors like on # HM11143395. You will need to examine your connectors closely to determine which one, # 20137...
    view full answer...

  • 5th Wheel Towing Capacity of 2007 Toyota Tundra CrewMax Cab
  • I suggest you check your owner's manual to confirm your Tundra's towing capacity since this can vary a lot based on engine, drive train bed length and whether any tow package upgrades have been installed. I think the 1475-lb figure you found may be a payload capacity, not a towing capacity. I reviewed an online edition of the owner's manual for the 2007 Toyota Tundra and on page 581 there is a Towing Capacity chart for the CrewMax cab version. I have linked that chart for your reference....
    view full answer...

  • Timbren Front & Rear Bumpstop Options for 2007 Toyota FJ Cruiser 4x4
  • The Expert Answer that you are referring to is for a 2012 Toyota Tundra 4x4. The 2012 Tundra has different rear bumpstops than your 2007 FJ Cruiser 4x4. The part # TABSTORSEQ that fits your Cruiser will not fit on the Tundra. Timbren offers a few different options for you to add some suspension enhancement for your Cruiser and it all depends on how you plan on using it. The Rear Off-Road Bumpstops # TABSTORSEQ are rated for 6,000 lbs whereas the Timbren Rear Suspension Enhancement System...
    view full answer...

  • Curt 18110 compared to 18140
  • First lets talk about a hitch for your 2007 Toyota Prius, I would recommend the Draw Tite hitch part # 24808. The reason for this is that Curt recommends you use a stabilizer strap like part # 18050 when you use a non-supported load on the hitch like a cargo carrier. Draw Tite doesn't have that requirement so I think you would be happier with the # 24808. Now the differences between the Curt Cargo Carriers part # C18110 and the # C18145 are pretty substantial. I personally like the #...
    view full answer...





^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.