Menu Icon

Vehicle Cargo Control

change make

Select Vehicle Model

  
Vehicle Cargo Control

Available Models for 1995 GMC Vehicle Cargo Control


Custom Vehicle Organizers

Need to get your gear secured and out of the way? We offer cargo control solutions from Du-Ha, Husky Liners, and Bestop. Du-Ha and Husky Liners under-seat storage boxes and gun cases are perfect for organizing hunting gear, towing equipment, fishing tackle, tools and other loose items. Bestop's Jeep cargo racks, saddle bags, trunk organizers, consoles and overhead storage will help clean up the clutter so it is not bouncing around or out of your Jeep.

View the complete list of organizers by entering your year, make, and model to the left.



Accessories



1995 GMC Questions and Answers


  • Dimensions of Replacement Hitch Ball for B&W Turnoverball Underbed Gooseneck Hitches
  • I went out to the warehouse and pulled the Replacement Hitch Ball for B&W Turnoverball Underbed Gooseneck Hitches, part # BWGNXA2000, and took some measurements for you. The square part of the hitch ball is 4" long and 2-1/2" wide. The diameter of the locking pin hole is 11/16". See the video and the picture I made at right which shows the exact dimensions you asked for as well as a video review of this hitch ball.
    view full answer...

  • Function Of Trailer Vents On Enclosed Trailer
  • The vents we offer for an enclosed trailer like part # 9139 are designed to allow air into the trailer. None of the vents we offer create a pressurized condition in the trailer and none are equipped with an air filtration system to keep dust out. Some of the features on the vents like # 9139 allow you to adjust the amount of airflow in the trailer with a butterfly valve mounted on the inside of the vent which would be operated from inside the trailer. Other trailer vents, like part...
    view full answer...

  • Replacement Steering Stabilizer Shock for Demco Kar Kaddy Tow Dolly
  • Replacement Steering Stabilizer Shock # DM01729-30 is the correct current replacement part for your Kar Kaddy 3 and it also fits the Kar Kaddy SS model tow dolly. I verified this item in Demco's Kar Kaddy specs.
    view full answer...

  • Wiring Harnesses Needed to Install a Brake Controller on a 1995 GMC C3500
  • Chances are the 1995 GMC C3500 did not come with a factory tow package, so you will have to hardwire the vehicle if you want to use any brake controller. It is not as difficult as it sounds. You will need a few things first. You will need the Brake Controller 7 and 4 Way Installation Kit, # ETBC7. I have included a couple of videos showing this kit being installed. You will also need the Tow Ready Custom Fit Vehicle Wiring, # 118315, if you do not already have a 4-flat connector. I have...
    view full answer...

  • Will Blue Ox Class V Hitch Fit 1995 GMC C/K Pickup Cab And Chassis Truck With Lift Gate
  • The B&W Heavy-Duty Trailer Hitch, part # BWHDRH25122 is designed to fit a 1995 GMC C/K Cab And Chassis pickup. This hitch will fit pickups with a 34 inch frame and will not work on trucks that have dual fuel tanks. I pulled one of these from our warehouse and took a couple of measurements for you. As the attached photo shows, the measurement from the top of the receiver to the top of the bracket that attaches to the bottom of the truck frame is 5 inches. If your lift gate does not interfere...
    view full answer...

  • Compatibility of MaxxHaul Ladder Rack with Pickup That Has Bed Liner
  • The MaxxHaul Side-Mount Truck Bed Ladder Rack # MT70233 fits on many different short bed pickups but it is not a confirmed fit for your 1995 GMC C/K Series Pickup. But we do offer many other choices of ladder rack for your pickup that can be seen by clicking on the link provided. At the top of the page select Your Vehicle Style from the drop-down menu to then see racks that fit your particular truck. Maxxtow offers their # MT70386 which fits both 6-1/2- and 8-foot beds. If your bed liner...
    view full answer...

  • Recommended Class V Hitch For 1995 GMC K2500 6.5L Diesel
  • For your 1995 GMC K2500 with 37 inch wide frame, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" # C15325. This is a confirmed fit for your truck and is a heavy duty hitch rated for 2400 lbs tongue weight and 16000 lbs gross towing weight. With weight distribution, that towing capacity rating increases to 17000 lbs. These ratings may be higher than your truck capacities, so you will want to make sure to check your owners manual. The distance from the mounting...
    view full answer...

  • Maximum Tongue Weight for 75122 for 1995 GMC Safari
  • The Draw-Tite part # 75122, has a maximum weight carrying towing capacity of 5,000 pounds and maximum tongue weight of 500 pounds. If you utilize a weight distribution system, the maximums are increased to 7,500 pounds total weight and 750 pounds tongue weight. Keep in mind, you can only safely tow as much as the lowest rated component of the system can handle.
    view full answer...

  • Measurement from the Mounting Locations to the Top of the Receiver Tube for the Curt Class V Hitch
  • The distance from the mounting location to the top of the receiver tube for the Curt # C15325 is 4-1/4 inches. This Class V hitch is confirmed as a fit for your 1995 GMC C/K Series Pick up. It has a 2 inch receiver opening, is rated for a maximum trailer weight of 16,000 pounds, and 17,000 pounds with weight distribution. It has a maximum tongue weight of 2,400 pounds.
    view full answer...

  • Recommended Fifth Wheel Hitch for 1995 GMC 1500 and Fifth Wheel Trailer
  • Yes and I have just the fifth wheel hitch for you. Take a look at the Reese 5th Wheel Trailer Hitch # RP30047, and Reese Universal Base Rails and Installation Kit # RP30035. This hitch has a 16000 lb weight capacity and has garnered excellent review from our customers. For a wiring kit use # 20023. This kit allows Remote Trailer Wiring in the pickup bed when towing 5th Wheel. I have included a link to the installation instructions for you to view. I have also included a link to a...
    view full answer...

  • Should Curt TriFlex Brake Controller be Drawing 21.5 Milliamps in Standby Mode
  • All modern brake controllers including the Curt TriFlex # C51140 draw a few milliamps at idle. The Curt controllers are slightly different in their circuitry and can draw a little more than other brake controllers. This power draw is normal and it would take months of the vehicle just sitting, not ever running, for it to drain a battery.
    view full answer...

  • How Long of a Light Bar can the CARR C-Profile Rota Light Bar # CARR210111 Hold
  • The CARR C-Profile Rota Light Bar # CARR210111 that you referenced can hold up to a 50 inch light bar like the part # P10050.
    view full answer...

  • Recommended Equipment to Tow With a 1995 GMC 3500
  • Oh I wouldn't be too concerned with your 1995 GMC 3500 Dually with a 454 motor having trouble pulling a camper trailer. A truck that is a 3500 model is made for heavy-duty applications. The best way to find out the towing weight capacity of any vehicle is by looking into the owner's manual. If the owner's manual doesn't have that information sometimes you can find it on a sticker inside the door frame. The only great concern that I would have is the age of the vehicle. Even if it...
    view full answer...

  • How to Measure a Pin Box to Determine What Model It Is for Sidewinder Replacement
  • Normally there will be a plate or sticker on the pin box of a fifth wheel trailer that will tell you the model name and number. If you cannot find the number you can use the measurements of the bolt holes of the pin box to determine which one you have. I attached a help article on how to do this for you to check out also.
    view full answer...

  • Recommendation For Towing Mirrors on a 1995 GMC 2500 HD Towing a 28 Foot Airstream Trailer
  • I have a few choices in towing mirrors for your 1995 GMC 2500 HD towing a 28 foot Airstream trailer. The CIPA Custom Towing Mirrors, part # 10201, and part # 10202, would be a good choice. These mirrors will slide over your existing mirrors and install without any tools. They are fully adjustable and do not obstruct your existing mirrors. The CIPA Deluxe Door Mount Mirror, part # 11650, that you have referenced is also a good choice. It is a universal mount mirror and can mount on...
    view full answer...

  • Where Do I Connect Red Wire When Installing Brake Controller on 1995 GMC 4x4 Pickup
  • When installing a brake controller in your 1995 GMC Pickup, the red wire will connect to the brake light circuit which can be located at the stop light switch at the top of the brake pedal. Since there is typically more than one wire at the switch, you will need to use a circuit tester like the Quickee, # 3808, to determine which wire has power when the brake pedal is depressed. GM typically used a light blue or white wire for this circuit. Once you have located this wire, you will then...
    view full answer...

  • No Signal when the Brakes are Applied After Brake Controller Installation on a 1995 GMC Pickup
  • It sounds to me as if you do not have the red brake switch wire or the black power wire from the Agility brake controller, # HM47295, connected to the correct circuit. Use a circuit tester, like part # 3808, to test the black wire first. You should have 12 volt power at all times going into the brake controller. If not you will need to find a constant 12 volt power source. We recommend using 10 gauge wire, # 10-2-1, and a 30 amp circuit breaker, # PK54530, inline on the power wire and...
    view full answer...

  • How to Select Replacement Hub Assembly for Ranger Tandem Axle Trailer
  • Vortex hubs are made by Tie Down Engineering and are claimed to offer reduced maintenance requirements. We do not offer these hubs but in general a replacement hub can be selected by confirming the axle weight rating, wheel bolt pattern and the bearing set used inside the hub. The inner and outer bearing parts must match those in the original hub in order for the replacement hub to fit properly on the trailer spindles. I linked for you our main page for trailer hubs. You can click on...
    view full answer...

  • Installing Tekonsha Voyager Trailer Brake Controller on 1995 GMC Van
  • A good starting point for your brake controller installation is to review the two attached FAQ articles concerning brake controllers and their wiring and installation. These will provide the information you need to determine parts required and how to install them. For newer vehicles we can often supply a manufacturer-specific wiring harness to connect your brake controller to your vehicle brake control port, but we do not have a custom wiring harness specified for your 1995 GMC van. Depending...
    view full answer...

  • Using a Continuous Ground Circuit to Correct Insufficient Ground Circuit on Pop-Up Camper
  • It sounds as if there is still an insufficient ground connection. I would recommend using a different grounding point on the trailer, and instead of using the trailer body or frame itself as the ground, wire up a continuous ground circuit by running a wire from that grounding point to each lamp on the trailer, creating a foolproof ground circuit.
    view full answer...

  • 1995 GMC K2500 Seirra Towing Mirror Recommendation
  • For your 1995 GMC K2500 the correct slip-on towing mirror would be the part # CM10200 as it has been confirmed as a fit. I attached an install video for you to check out as well. When installed properly they should vibrate at all.
    view full answer...

  • 5th Wheel Rail Bracket Recommendations for a 1995 GMC K2500
  • Yes, the Reese Universal Mounting Brackets # RP58314 that you referenced will work on your 1995 GMC K2500. These are just the brackets, if you need the installation hardware plus the rails you would want part # RP30035. If you need just the brackets and hardware minus the rails you would want part # RP30439.
    view full answer...

  • Towing Mirror Recommendation for a 1995 GMC Sierra 1500
  • For your 1995 GMC Sierra 1500 you can use Longview towing mirrors # CTM1200 which comes with both a passenger and driver side. They will fit stock mirrors that are manual or power but will not fit stock mirrors equipped with additional lighting features that are not flush to the mirror, such as LED turn signals, automatic dimming, and puddle lights. For stock mirrors with these additional lighting features that are flush to the mirror, these mirror attachments will fit, but those functions...
    view full answer...

  • Recommended Tow Hook Options for a 1995 GMC K1500
  • The Chrome Plated Steel Tow Hooks part # 63029 are a universal fit item and we have not had the chance to test the fitment of these on a 1995 GMC K1500 yet. Most likely you will need to drill two holes in each side of the frame to attach the tow hook. The tow hook is 5-1/2" long x 1-14" wide and the bolt holes are spaced 1-1/2" apart on center with a 1/2" diameter. The overall height of the hook is 3" and the distance from the top hole closest to the end of the hook is 3-1/4". I have also...
    view full answer...

  • Tips for Finding Brake Controller Stoplight Circuit Wire in Truck
  • All you need for the red wire of your brake controller is a circuit that sees voltage only when the brakes are applied. If you wanted to run a wire to the fuse box to find a wire like you said that would work fine. Some people will also use the third brake light circuit as well. It almost sounds like you are running the blue wire of the controller to the stop light circuit if the brakes lock up when you tap them. Or your brake controller is just set too aggressively. I attached a...
    view full answer...

  • How Would the Engager Trailer BreakAway Kit # 20099 Install on a Trailer
  • It would be pretty straightforward. You would want to remove your current breakaway system and install an Engager Trailer BreakAway Kit # 20099 like you referenced. To see how it would install I attached installation instructions, and install video, plus an FAQ article on these systems.
    view full answer...

  • Brake Controller Will Not Adjust and Digital Meter Shows Voltage Issue
  • I contacted the manufacturer and have a different way for you to check to see if your brake controller is able to work properly. They suggest not using the digital multi-meter because it doesn't actually pull any power so the brake controller doesn't respond the same way. First, unplug your trailer and check to see if the "c" goes away on your controller. If so, use a 12 volt incandescent circuit tester, like # ALL640595, because the light bulb will actually draw some amperage that...
    view full answer...

  • How to Find Stoplight Circuit in a 1995 GMC Suburban to Install Brake Controller
  • In order to find the correct stoplight circuit wire to use to install a brake controller in your 1995 GMC Suburban you will need to use a circuit tester like part # 3808 to test the wires coming out of the brake pedal's stoplight switch until you find a wire that only sees voltage when the brakes are applied and none when released. Since wire colors can vary this is the most reliable method to use to find the correct wire. I attached an FAQ on hardwiring brake controllers in vehicles...
    view full answer...

  • Size of Wrench/Socket Required for Installing Ball Mount C40086
  • The wrench size needed to install the Curt hitch ball part # C40086 that you referenced would be 1-13/16 inches. The torque required for tightening the but is 450 ft lbs...
    view full answer...

  • 800 Pound Springs Bars Cause a Stiff Ride with Trailer with 630 Pounds Tongue Weight
  • The 600 pound spring bars would be rated too low for 630 pounds of tongue weight and the system would be ineffective. The 800 pound bars are the way to go. Try to lower the trailer end of the spring bars by one chain link for less tension and that should help with the stiff ride.
    view full answer...





^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.