Menu Icon

Vehicle Cargo Control

change make

Select Vehicle Model

  
Vehicle Cargo Control

Available Models for 1995 Dodge Vehicle Cargo Control


Custom Vehicle Organizers

Need to get your gear secured and out of the way? We offer cargo control solutions from Du-Ha, Husky Liners, and Bestop. Du-Ha and Husky Liners under-seat storage boxes and gun cases are perfect for organizing hunting gear, towing equipment, fishing tackle, tools and other loose items. Bestop's Jeep cargo racks, saddle bags, trunk organizers, consoles and overhead storage will help clean up the clutter so it is not bouncing around or out of your Jeep.

View the complete list of organizers by entering your year, make, and model to the left.



Accessories



1995 Dodge Questions and Answers


  • Lug Nut Torque for a Trailer Wheel
  • 90-95 ft lbs of torque is probably about right for your trailer rims. If you check out the lug nut torque chart that I attached you will see that nearly all of the torque specs are that and higher.
    view full answer...

  • Location of Brake Controller Installation Connector on 1995 Dodge Ram
  • I am assuming that you are speaking of the installation connector for a brake controller. It is located on top of the white box on the firewall behind the emergency brake pedal. To install your brake controller, you will also need a Wiring Adapter, part # 3020-P. If your truck isn't equipped with the factory 7-way trailer connector, the plug might not be present. If the connector is not there, you'll need to hardwire the controller using our brake controller installation kit, part...
    view full answer...

  • B and W Compaion Hitch Base Recommendation to Convert Companion Hitch for 2015 Ram Truck
  • Since you have a Companion hitch already you could take the head off of it and install it onto the Replacement Base for OEM Ram Hitch Prep Packages part # BWRVB3600. The B and W Companion Hitch heads are all the same, they are part # BWRVC3006.
    view full answer...

  • Dimensions for Curt Hitches 15300, 15511, 15318, 15319
  • I spoke with my contact at Curt and he put together a chart that has all of the dimensions of the hitches you referenced.
    view full answer...

  • Installed New Electric Brakes and When I Plug the Trailer Into the Truck they Lock Up
  • It sounds like you have a wiring issue between the truck, adapter and trailer connector. I would start at the factory 7-Way on both of your trucks and test them for proper function. The photo I added shows the proper function for each terminal inside the 7-Way connector. Once you are sure the vehicle side connectors are wired correctly you can turn your attention to the trailer and make sure the connector on the trailer, I am assuming a 6-Way since it is a horse trailer, is wired correctly,...
    view full answer...

  • Gooseneck Trailer Wiring Harness for 1995 Dodge Ram 2500
  • Due to the age of the truck, neither Curt nor Tow Ready have a listing for the vehicle, but there are only two possibilities. The wiring harness that plugs into the rear of your OEM 7-way should have either a rectangular or a round connector on it. If it is rectangular, use the # C56071 you mentioned. If instead, your 7-way uses a round connector, use part # C56070. I have provided a photo showing both styles of connectors side-by-side. I have linked you to install details.
    view full answer...

  • Weight Distribution Recommendation for a 3,179 Pound Flagstaff T12RB Folding Hardside Camper Trailer
  • When choosing a weight distribution system, you will want one that has a tongue weight capacity range that encompasses the trailer tongue weight when it is loaded and ready to tow. Tongue weight should be between 10 to 15 percent of the gross trailer weight. For a trailer weighing 3,179 pounds, that would make the tongue weight between 317 and 477 pounds. Based on the estimated tongue weights above, I recommend a system rated for 200 to 600 pounds tongue weight like # RP66082. The...
    view full answer...

  • No-Drill 5th Wheel Hitch Installation Kit for 1995 Dodge Ram 2500 4x4 Long Bed
  • The easiest 5th wheel base rail installation will be with a custom-fit kit. For your 1995 Dodge Ram 2500 4x4 long bed we offer the Husky kit # HT31404-686 which does still require some frame drilling for installation but less than universal kits like # RP30035. We do offer other kits that do not require any frame drilling. These are the B&W Underbed Installation Kit # BWGNRK1394-5W that works with their Companion 5th wheel hitch # BWRVK3500-5W. This set-up gives you both goose neck and...
    view full answer...

  • Trailer Lights Not Working After Cleaning Grounds and Making Fresh Wiring Connections
  • Do not despair. I will be happy to help. This does sound like a classic ground issue but there could be some other factors involved as well. So we will start with the easy things to check and work our way from there. Testing the trailer connector on the truck was a good start. The next thing you will want to do is plug in the adapter to the 7-Way and test the pins on it. If they are incorrect, there could be a problem with the adapter. Next, you can plug in the trailer and test the wires...
    view full answer...

  • Brake Controller and Trailer Wiring Setup for 1995 Dodge Ram 1500
  • Congratulations on your new truck! Since brake controllers are for electric brakes, boat trailers generally do not have electric brakes due to them being used around water. You have a 4-wire connector on your boat trailer, so you would not have hydraulic brakes either, probably because it is light enough that they are not needed. Under your dashboard, the 6-wire plug is for the brake controller, while the 2-wire plug is most likely for computer diagnostics. To use your boat trailer...
    view full answer...

  • 5th Wheel Rail and Installation Kit Recommendation for a 1995 Dodge Ram 2500
  • For your 1995 Dodge Ram 2500 Pickup I would recommend you get a Reese Fifth Wheel Installation Kit, part # RP30035. I attached installation instructions as well as a video of this product being installed into a vehicle for you check out also.
    view full answer...

  • How Many Trailer Brakes Should be Used with a 20 Amp Circuit Breaker or 30 Amp Circuit Breaker
  • The recommendation for 2 to 4 brakes is a 20 amp circuit breaker, # PK54520, and for 6 to 8 brakes a 30 amp circuit breaker, # 38630, just as you have stated. Usually, you would go with the smallest sized circuit breaker for the system being used. This is so if there is a problem, it can be caught right away. If you plan on towing trailers with 2 to 4 brakes and trailers with 6 to 8 brakes, it would be best to go with the 30 amp circuit breaker as the 20 amp circuit breaker would not...
    view full answer...

  • Recommended Wiring for Brake Controller On a 1995 Dodge Ram 1500
  • To connect a brake controller to a 7-Way connector on your 1995 Dodge Ram 1500, I recommend the Universal Installation Kit for Trailer Brake Controller, # ETBC7. This will give you all the circuit breakers, wiring, and the 7-WAY connector. The only thing you will need to do is use butt connectors like # DW05745-10 to splice the 4 way round wiring into the 4 way flat wiring connections as the connector ends will need to be hardwired to each other. For a brake controller, I'd recommend...
    view full answer...

  • 5th Wheel Trailer hitch Installation Kit for a 1995 Dodge Ram 2500 and Husky 5th Wheel Hitch
  • For your 1995 Dodge Ram you can use a universal installation kit like # RP30035 that comes with the below the bed brackets and the above the bed rails. For a custom kit that requires less install time and less drilling you can use # HT31404-686. Either one of these kits will be compatible with your Husky 5th wheel trailer hitch.
    view full answer...

  • Trailer Hitch Compatability for a 1995 Dodge 3500 Full Size Van with 35 Gallon Fuel Tank
  • Draw-Tite Trailer Hitch for the 1995 Dodge Van, item # 41533, is designed to fit all full size Dodge vans, except those with factory step bumpers, regardless of the factory fuel tank size. If a larger fuel tank has been installed on the van, there is no guarantee that any hitch will fit. I have included instructions (see link) for your to review. Since your camping trailer is 6,000 pounds, you may want to consider the use of a weight distribution system. The tongue weight of the trailer...
    view full answer...

  • Will Roadmaster Rear Anti-Sway Bar # RM-1129-111 Fit Class B Motorhome on Dodge B350 Cut-Away
  • My contact at Roadmaster Engineering advised that their rear anti-sway bar # RM-1129-111 could work on your Dodge B350 cut-away chassis motor home with large fuel tank depending on where the larger fuel tank is positioned. The anti-sway bar requires 12-inches of clearance behind the axle. Please refer to the linked instructions and check your motor home for the amount of clearance around the back of the axle.
    view full answer...

  • Comparing Curt Hitches # C15319 & # C15318 for 1995 Dodge Ram 3500 4WD Dually Diesel
  • We offer three Class V Curt hitches for your 1995 Dodge Ram 3500 4WD Dually Diesel that can be seen on the linked page. All share the same 2400-lb tongue weight (TW) and 16K maximum trailer weight ratings, and all increase to 17K GTW if used with a weight distribution system. The difference between Curt hitches # C15318 and # C15319 is that C15318 installs without drilling while C15319 may require some drilling due to vehicle manufacturing variances. I have linked a video for hitch C15318...
    view full answer...

  • Electric Fan and Shroud Kit Recommendation for 1995 Dodge Ram with 5.9 liter Engine
  • We have electric fan and shroud kits that would work great most likely for your 1995 Dodge Ram but I am going to need to know the size of the area behind the radiator to give you the best recommendation. I tried looking up that dimension and it looks like most places are saying it's right at 26 by 19 inch which is pretty standard so that would make sense but I would want you to verify that first before ordering. We have the dual fan and shroud kit part # D16927 which would be a great...
    view full answer...

  • Valve Stem Hole Diameter for the Dexstar Wheel part # AM20532
  • The valve stem hole of the Dexstar wheel part # AM20532 that you referenced is .453 inches. For a valve stem to fit this hole we have the Americana part # AM20903 as a confirmed fit.
    view full answer...

  • Weight Distribution Shank with a Large Drop and Sway Control Adapter Plates for a 1995 Dodge Ram
  • Perhaps the best solution is a different shank for your weight distribution system. Take a look at Weight-Distributing Shank, # RP3215. It has a drop of 6-7/8 inches for round bars, 6-1/8 inches for trunnion bars. There are numerous measurements on the product page to determine if it will fit the hitch on your 1995 Dodge Ram and WD system. We do have sway control adapters. I have included a link to them below. You would have to make sure the ball shafts length, including those on Ball...
    view full answer...

  • Instructions for Installing Pop & Lock Custom Tailgate Lock # PAL3300 on 1995 Dodge Ram Pickup
  • When installing the Pop & Lock Custom Tailgate Lock, # PAL3300, on your 1995 Dodge Ram Pickup you will need to remove the lower of the three bolts and loosen the other two. I have attached installation instructions for you.
    view full answer...

  • Will a Toolbox Interfere with the Handle of the Husky Silver Series 26K 5th Wheel Hitch
  • The toolbox in your 1995 Dodge Ram 2500 will not interfere with the handle of the Husky Silver Series 26K Fifth Wheel Hitch, # HT31318-31325. The handle will still remain between the base rails of the hitch and will not extend forward past the front base rail. The forward-most edge of the forward-most base rail will be approximately 57 inches from the rear edge of the truck bed (see photo). You can measure 57 inches from the rear edge of your pickup bed forward to see if your toolbox...
    view full answer...

  • Replacement 7-Way Vehicle-Side Trailer Connector for 1995 Dodge Ram 2500
  • As long as your 1995 Dodge Ram 2500 has a rectangular plug at the end of the factory wiring harness, I recommend the Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket for Dodge # PK11893-11933. This connector will plug into the factory rectangular connector and provide you with a 7-Way vehicle-side socket for the rear of your pickup. I have attached a review video of this connector for you. If the plug on the end of your vehicle's factory wiring isn't a rectangular...
    view full answer...

  • Removing Corroded 7-Way Connector on a 1995 Dodge Ram 1500 and Replacing With a 4-Way Connector
  • You can use the Tow Ready T-One Wiring Harness, part # 118329, to get a 4-Way on the back of your 1995 Dodge Ram. This wiring harness will plug into the back of your tail lights underneath the truck bed along each frame rail. The connection points will be located close to the bumper. You can leave your existing 7-Way on your vehicle. I am including links to the installation instructions on the # 118329 wiring harness and a video of the wiring harness being installed on a 1999 Dodge Ram.
    view full answer...

  • How to Connect the Yellow Wire for Use on Adapter Vehicle End Trailer Connector # 30717
  • Regarding the Yellow wire on the Adapter 4 Pole to 7 Pole Vehicle End Trailer Connector, # 30717, how and what you connect it depends on what function you need it to perform. For example if your trailer has reverse lights, or you have a coupler with an electric reverse lockout feature, you would connect the yellow wire to the reverse light wire behind one of the taillights. If you need it to provide power to something on the trailer such as to maintain a battery, you should have it...
    view full answer...

  • Items Needed to Flat Tow 1995 Dodge Dakota 4x4 With 2000 Coachman Motorhome
  • To safely tow your Dakota 4X4 with your Coachman RV you will need several components. Those items are a tow bar, base plate kit, safety cables, tow bar wiring or light kit, and possibly a supplemental braking system to actuate the Dakota brakes when you apply the brakes in the motorhome. Please note that some states require use of a supplemental braking system; check the laws in your state to ensure you are compliant. Please refer to the attached article which provides a complete overview...
    view full answer...

  • Recommended Hitch to Fit on a 1995 Dodge Dakota
  • The Hitch # 75073 will fit your 1995 Dodge Dakota as long as it does not have the optional rear spoiler or a roll pan bumper. If you plan on doing some towing, you will also want to pick up a wiring harness. The wiring harness that I recommend for your truck is the Tow Ready T-One Harness, # 118329. This harness will simply plug into your tail light assemblies and does not require any cutting or splicing. The final items that you may need to complete your towing set up are a ball...
    view full answer...

  • Installation of CIPA Extendable Towing Mirror # CM-83000 on 95 Dodge Ram 2500
  • You are correct, the old mirrors would be removed and discarded and the Cipa # CM-83000 mirrors would be installed in their place. Full installation instructions are included with the mirror. In a nutshell, the installation involves removing 1 screw and a few fasteners from the interior door panel to provide access to the nuts holding the existing mirrors in place. These nuts would be removed, and the existing mirror pulled away. The procedure would be reversed to install the Cipa Extendable...
    view full answer...

  • Availability of a Light Bar For 1995 Dodge Ram 1500
  • For your 1995 Dodge Ram 1500 I do have grille guards available that you can add driving lights to. Some of the grille guards are pre-drilled for adding driving lights. I am including a link to a product page that will show the selection of grille guards for your Dodge Ram. When you click on one of the grille guards it will go to the product page of that part number and on the right of that page will be a related products box that will show available lights that can be added to that grille...
    view full answer...

  • Bumper and Hitch Recommendation for a 1995 Dodge Dakota
  • There aren't any safety chain loops on the Westin Fey Bumper part # 63000-97800. Safety chains would be better attached to a hitch. For a hitch for your 1995 Dodge Dakota that has safety chain loops you would want the Curt Class III Hitch part # C13280. For trailer wiring you would want the Curt Harness part # C55329. For ball mounts I recommend the etrailer Ball Mount Kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag.
    view full answer...





^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.