fall hauling headquarters

Claim a 25 Dollar Prepaid Visa Card with Purchase of Curt Spectrum Brake Controller

Brake Controller

Change Make

Select Vehicle Model

  
Brake Controller

Available Models for 1998 Isuzu Brake Controller


Brake Controller

Brake controllers are an essential part of a towing system with electric trailer brakes, and they offer a much-needed emergency braking feature. We offer high quality controllers from manufacturers such as Draw-Tite, Tekonsha, Valley, Hidden Hitch and Hopkins. Featuring both time-delay and proportional models, we have the right controller for any application. Brake controller wiring adapters are available for many vehicles, allowing for simple plug-and-play installation. Hardwire kits are also available to make any installation hassle-free.

Find your custom fit brake controller wiring adapter for a plug-in application by selecting the year of your vehicle to the left. We offer custom fit plug in adapters for many of the most popular vehicles, including Ford, Chevrolet, Dodge, GMC, Nissan, and Toyota.






Brake Controller Manufacturers


Accessories



1998 Isuzu Questions and Answers


  • Estimated Install Time for B & W Turnover Ball Gooseneck Hitch # BWGNRK1104
  • The B & W Turnover Ball you mentioned, part # BWGNRK1104 has an estimated 2 hour installation time when installed by a professional. The time it would take for a do-it-yourself installation would vary according to the person's mechanical abilities, but 3 to 4 hours wouldn't be unheard of.
    view full answer...

  • Lights for towing a 1998 Isuzu Amigo Behind My Motorhome
  • You will need a wiring kit to control the vehicle lights while in tow, the kit you selected is for towing a trailer with the Amigo not for towing the Amigo behind your RV. You can use the #38955 tail light isolating kit which will wire to the vehicle tail lights, and you will need a converter # 118158 because your vehicle has separate turn and brake lights. Another option is to use the light kit with bulbs, RM-155 which will use a separate bulb in the tail light housing and will eliminate...
    view full answer...

  • Brake Controller Recommendation for 1998 Isuzu Trooper Towing Camper Trailer
  • The brake controller I recommend for you is the Tekonsha Prodigy P2 Trailer Brake Controller # 90885. This brake controller works to apply the trailer's brakes proportionally to the brakes of your 1998 Isuzu Trooper, helping the trailer brake smoother and causing less wear and tear on both the trailer and your vehicle. The P2 also features a digital display, 3 boost levels, battery protection, and continuous diagnostics. This controller is designed to work with trailers that have up to...
    view full answer...

  • Camper with Weak Marker/Running Lights on Right Side
  • Your best bet would be to trace the running light circuit from the trailer connector all the way back to the lamps. You will want to pay careful attention to the point where the running light circuit for the right side of the trailer splits off from the circuit for the left side. Since the lights on the left side are operating fine, the problem most likely exists in the portion of the circuit after it splits off to power the right side marker lights. Check for pinched wires or cracked or...
    view full answer...

  • Recommended Weight Distribution System for 3500-lb Trailer and 1998 Isuzu Trooper
  • Weight distribution/sway control (WD/SC) set-ups are needed in several circumstances, such as when the trailer's weight is more than half of the tow vehicle weight. This is surely the case for your trailer and vehicle combination so a WD/SC system will definitely improve your trailering experience by taking away some of the vehicle rear-end sag and trailer sway. The key to choosing the correct system is knowing the total effective tongue weight (TW) of the setup. This total TW is the...
    view full answer...

  • Where are the Connection Points for Trailer Wiring Harness # 118360 on a 1998 Isuzu Rodeo
  • You are correct about how to install the T-One Vehicle Wiring harness, # 118360, on your 1998 Isuzu Rodeo. The connector on the harness with the yellow wire plugs in line with the driver side tail light wiring behind the tail light. The connector with the green wire does the same on the passenger side. Installation will be as quick and easy as adding trailer wiring can be. I have included a link to the installation details for you to view.
    view full answer...





^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.