View Cart

Custom Fit 2014 Toyota Camry Accessories

Change Vehicle




2014 Toyota Camry Videos

Best 2014 Toyota Camry Roof Rack Options

Speaker 1: Today we're going to be going over the best roof rack options available for our 2014 Toyota Camry. Right now on our roof we have all top three roof rack systems installed. Now naturally you wouldn't be putting three bars on top of a Toyota Camry, but we wanted to show you how they looked on the vehicle itself.At the front here we have the Thule AeroBlade roof rack system. In the middle we have the Rhino-Rack Vortex Aero roof rack system. Finally at the rear, we have the Yakima CoreBar roof rack system. Let's go ahead and go over some of their differences.First and foremost, when choosing a roof rack system for your vehicle you have to consider what exactly it is that you're hauling.



Best 2014 Toyota Camry Trailer Wiring Options

Speaker 1: Today we're going to be taking a look at the best wiring options for your 2014 Toyota Camry. Over here we're going to have the CURT wiring kit. It's going to provide us with a four-pole flat trailer connector. Then over here we're going to have the Tekonsha wiring kit. It's also going to provide us with a four-pole flat trailer connector.The differences between our two wiring kits is going to be very small. The major difference is going to be the powered converter.



Trailer Hitch Installation - 2014 Toyota Camry - Draw-Tite

Today on our 2014 Toyota Camry, we're going to be taking a look at and installing the Draw-Tite Class II trailer hitch receiver, part number 36540. Here's what this hitch is going to look like once it's installed on the vehicle. As you can see, overall it tucks up pretty tight. Although you can see the cross tube here, it still maintains a pretty clean look. This hitch is going to be really good for things like bike racks and cargo carriers because it's going to give plenty of clearance. Where the face of this receiver tube is it's actually just a little bit out past the edge of the bumper here, not enough to look bad, but enough to make sure you have plenty of clearance for any of those hitch mounted accessories that you want to put on here. The installation of this hitch will require some drilling, but it's not very difficult to do.



Rola 21x55 Hitch Cargo Carrier Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry we're doing a test fit of the ROLA 21 by 55 cargo carrier. That part number is 59507. Now this is designed to work with 1-1/4" hitches only and has a 300 pound weight capacity. We're going to start off with some measurements, ground clearance being first. We're going to have about 13". Overall to our vehicle we're going to have about 30-1/2".



Yakima Trunk Bike Racks Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry we're doing a test fit of the Yakima FullBack trunk-mount 2-bike rack. That part number is Y02634. Now we already have our bike secured down. We're first going to show you how we do that. We have two cradles in place with three straps, two on our frame and one as our anti-sway in the back. We're going to remove those and then remove our bike and set it off to the side. I suggest that you replace your straps just so they don't get lost or damaged.



Yakima Trunk Bike Racks Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry we're doing a test fit of the Yakima HalfBack trunk-mount 2-bike rack. That part number is Y02636. Now we already have our bike secured down. We're first going to show you how we do that. We've got two cradles in place with three straps, two on our frame here and one as our anti-sway. These are also known by Yakima as Zip Strips.



Thule Trunk Bike Racks Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry we're doing a test fit of the Thule Raceway Pro trunk-mount 2-bike rack. That part number is TH9001PRO. Now we already have our bike secured down. We're first going to show you how we do that. We've got two cradles in place with three straps, two on our frame here and one as our anti-sway in the back. We're going to pull down and lift up to release those.



Best 2014 Toyota Camry Hitch Options

Today on our 2014 Toyota Camry we'll be looking at the most popular hitch options. On the top we have a Draw-Tite Class II, Part Number 36540, and on the bottom we also have a Curt Class II, Part Number C12107. Both these hitches share the same basic construction. The main difference is the Draw-Tite on the top here has a square bodied frame, whereas the Curt on the bottom here has got a round tubular construction. They both have a durable black powder coat finish. The Curt is slightly more glossy than the Draw-Tite. They both attach using about the same mounting methods.



Saris Bones Trunk Bike Racks Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry, we are going to be test fitting the Saris Bones 3 Bike Trunk Mounted Rack part number SA801. We'll begin our test fit by placing the bottom portion of the rack, the feet here on the bumper, we'll then rotate the upper part of the rack into place. This feet do rotate also to help accommodate the fit. Now if you are going to need to adjust the arms which right now they are in a good position, you do so by undoing the wing knob here, point it out to the side, rotating them and then pushing it back into position. You could also do the same thing for the bottom arm and at the same way that the top arms also move. We'll go ahead and start securing our straps. We'll start on the driver side here as they are all connected and they are stamped as to which is the correct one.



Hollywood Racks Baja Trunk Bike Racks Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry we're going to be test fitting the Hollywood Racks Baja 2-bike trunk-mounted rack, part number HRB2. We'll begin our test fit by placing the bottom rail here with the pads on top of the bumper, centering it. We'll then rotate it forward. As you can see, our bars here are going to come into contact so we do need to adjust by opening these levers here on either side. Then we're going to rotate our arms so that they're level or at a slight incline. As you can see, this is going to give us more space here as well.



Hollywood Racks Expedition Trunk Bike Racks Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry we're going to be test fitting the Hollywood Racks Expedition 2-bike trunk-mounted rack, part number HRF6-2. We'll begin our test fit by placing the lower bar on top of our trunk. We'll then rotate it forward. We're going to start by adjusting the arms here. We'll open the levers on the side. It also has a pad that rests on the trunk so we want to try to get our arms level or slightly inclined, so we're at a pretty good place right here.



Rhino Rack Roof Rack Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry, we're going to be test-fitting the Rhino Rack Vortex Aero Roof Rack System in silver. We'll begin our test-fit by assembling one of the fit kits. We've got our Aero Blade here, part number RRVA118S-2. We have our Foot Pack, part number RRLKVA, and our Fit Kit, part number DK321. We'll go ahead and assemble this for you. That way you've got an idea how to do it at home.



Rhino Rack Roof Rack Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry we're going to be test fitting the Rhino-Rack Vortex Aero Roof Rack System in black part numbers RRVA118B-2 for our Aero Bar RRRLKVA for our foot pack and DK321 for our fit kit. We went ahead and assembled an installed the rest of the foot packs but I'll go ahead and show you how to do it on this one. The arrow here on the bottom of the bracket is going to face toward the outside of your vehicle. You also have an arrow on your pad here and that's going to be facing the front of the vehicle. We'll go ahead and press this on and move our bolt here, lay our clip in place and re-install our bolt. With that done we'll go ahead and turn our bar over here, remove the end cap, we'll then take and slide the block here into the channel. With that done we need to get our strip length. These will be included with your kit.



Hollywood Racks Express Trunk Bike Racks Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry, we're going to be test fitting the Hollywood Racks Express Three Bike Trunk Mounted Rack. Part number HRE3. We'll go ahead and begin our test fit by mounting the bottom bar and pads onto the top of the bumper. We'll then rotate it forward and see how our fit is. As you can see we need to adjust the top bar here, we'll go ahead and loosen the wing knobs on either side and this is going to allow us to rotate this bar. Now you want to try to get your arms here level or slightly at an incline.



Thule Trunk Bike Racks Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry we're going to be test fitting the Thule Gateway 2-bike truck-mounted rack, part number TH9006XT. We'll begin our test fit by placing our rack on top of the vehicle. With this rack you want to position the lower mounts just on top of the bumper and then you can kind of roll the upper mounts into place. Now we went ahead and preset the fit notch to seven per the fit guide. We'll then go ahead and take our straps that go over top of our trunk and get those into place. Want to make sure that they're not twisted. Okay, with those into place we'll go ahead and understood all of our slack that we've got tied up out of the way and get these nice and snug.



Thule Passage Trunk Bike Racks Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry, we're going to be test fitting the Thule passage 2-bike trunk mounted rack part number TH910XT. We'll begin our test fit by positing the rack. The lower portion is going to go just on the top of the bumper and then we'll rack our our top arms up. Now, we went ahead and preset the fit dial to 7 for the fit guide so that part is already done. We'll take our top straps and feed them to hook onto the top of the trunk. Same thing over here. We will just get them tighten down just slightly so it will hold it in place.



Thule Sonic Medium Rooftop Cargo Box Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry, we'll be test fitting the Thule Sonic Medium Rooftop Cargo Box, with 13 cubic feet of space in glossy black, part number TH634B. With the Thule Rapid Traverse Roof Rack System installed on the roof of our Camry, we'll begin our test fit by placing the cargo box up onto the vehicle's load bars. After positioning the clamps to fit over the bars, we can unlock the box and open the lid, exposing the two closest knobs. We'll then turn the knobs to tighten down the clamps around the bars. This box does feature the Accu-tight mounting hardware, which will notify you when the clamps have been fully tightened down when the knob starts to click. We'll then move to the other side of the vehicle and repeat the same process. This double sided opening lid also enables you to easily load and unload your cargo from either side of the car. Once everything is all tightened down and secured, that will complete today's test fit of the Thule Sonic Medium, part number TH634B on our 2014 Toyota Camry.





Thule Pulse Medium Rooftop Cargo Box Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry we're going to test fit the Thule Pulse Medium Rooftop Cargo Box with 14 cubic feet of space in matte black, part number TH614. With the Thule Rapid Traverse roof rack system already installed on our car, we'll go ahead and start our test fit by placing the cargo box on the rack. Now we're going to place the cargo box toward the passenger side of this vehicle because it only opens from the one side. We'll go ahead and place the feet through the slots of the box, lining it up with the bars. Once we make sure they're lined up, we'll go ahead an tighten down the knobs, and that'll secure the box onto the rack. We can go ahead and close the box, and we're ready to go.



Thule Force Medium Rooftop Cargo Box Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry we'll be test fitting the Thule Force medium Rooftop Cargo Box with 13 cubic feet of space in AeroSkin Black part number TH624. With the Thule Rapid Traverse Roof Roof Rack system installed on the roof of our Camry, we'll begin our test fit by placing the cargo box up onto the vehicle's load bars. After positioning the clamps to fit over the bars we can unlock the box and open the lid exposing the two closest knobs. We'll then turn the knobs which will tighten on the clamps around the bars. We'll then move to the other side of the vehicle and repeat the same process. This double-sided opening lid will also enable you to easily load and unload your cargo from either side of the car. Now that everything is all tightened down and secure that will complete today's test fit of the Thule Force Medium part number TH624 on our 2014 Toyota Camry. .=



Swagman Upright Roof Mounted Bike Rack Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry we'll be test fitting the Swagman Upright Roof Mounted Bike Rack, part number: S64720. With a Thule Rapid Traverse Roof Rack system installed on the roof of our Camry, we'll begin our test fit by placing the bike rack up on to the vehicle's load bars. Starting at the front I'll take the silver U bolts to go around the underside of the front bar up through the pre drilled holes at the head of the bike rack. I'll then thread on our black wing nuts, keeping them loose encase I need to make any adjustments. I'll then move to the back of the bike rack and take the silver U bolts to go down through the pre drilled holes of the bike rack, taking the black plate and I'll insert the bolt into the hole of the black plate and then thread on our wing nut. I'll swing it around the underside of the bar and repeat the same process for the other hole on the other side of the plate. I'll then tighten down those wing nuts.



Swagman Fork Down Roof Bike Rack Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry, we'll be test fitting the Swagman Fork Down Roof Mounted Bike Rack, part number S64710. With a Thule Rapid Traverse Roof Rack system installed on the roof of our Camry, we'll begin our test fit by placing the bike rack up onto the vehicle's load bars. We'll start at the front and take the silver U-bolts around the underside of our front bar, up through the pre-drilled holes at the head of the bike rack. We'll take our black wing nuts to thread down onto the threads of the silver U-bolt and tighten them down. I'll move to the back of the bike rack and adjust the sliding tray, and then take the silver U-bolt to go down through the holes of the bike rack. I'll take the black plate and insert the bolt through the hole of the black plate, and tighten it down with the black wing nut. Once everything is all tightened down and secure, I'm ready to install our bike. We'll simply just make sure the skewer is loose at the front, and we'll undo the cam buckle strap at the rear. We'll place our bike up onto the bike rack, slide in the forks down onto the skewer.



RockyMounts TieRod Stretch Roof Bike Rack Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry we'll be test fitting the RockyMounts TieRod Stretch Roof Mounted Bike Rack, part number RKY1011. With the Thule Rapid Traverse Roof Rack system installed on the roof of our Camry, we'll begin our test fit by placing the bike rack up onto the vehicle's crossbars. We'll allow the rubber coated steel straps to go around the front bar, and then we can remove the black plastic cover to hook the straps into position. I'll then use the included allen tool to tighten down the silver bolt, which will bring the straps tightly around the front bar. Moving to the rear, I'll use one of the allen keys to remove one of the allen bolts so that we can position the rear bracket around the rear bar. I'll reinstall the allen bolt into the black thick bracket on the bottom and use the included allen wrench to tighten both allen bolts down. Once everything is all tightened down and secure, we're ready to load up our bike.



Thule Sprint Fork Mount Bike Rack Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry, well be test fitting the Thule Sprint Roof Mounted Bike Rack, part number TH528. With the Thule rapid traverse roof rack system installed on the roof of our Camry, well begin our test fit by placing the bike rack up onto the vehicles load bars. Starting at the front here, Ill make sure the rubber coated steel straps are on the underside of the bar and Ill hook them back into the connection point. Ill then turn the Speed-Link knobs which will tighten down the straps tightly around the load bars. After repeating the same process for the back bar, were ready to install our bike. Well need to loosen up the acu-tight knob at the front of the bike rack which will extend the skewer outward. Well then undo the cam-buckle strap at the back of the bike rack and place our bike up onto the bike rack.



Thule Pulse Alpine Rooftop Cargo Box Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry we will test fit the Thule Pulse Alpine Rooftop Cargo Box with 11 cubic feet of space in matte black, part number TH613. With the Thule Rapid Traverse Roof Rack already fitted to our vehicle we'll begin by placing the cargo box onto the roof rack. Since this box only opens from one side we're going to place it closer towards the passenger side. With the box set in place we're going to go ahead and open it, grab the feet from inside the box and slide them through the slots. With the feet hanging through the slots we're going to ensure that they fit around the bars. We'll then reach in, tighten the knobs and secure the feet to the bars. With that our cargo box is ready to go. That concludes today's test fit of the Thule Pulse Alpine Cargo Box part number TH613 on a 2014 Toyota Camry.



Thule Hyper XL Rooftop Cargo Box Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry, we'll be test fitting the Thule Hyper XL Rooftop Cargo Box with 17 cubic feet of space and two-tone black and silver, part number TH612. With the Thule Rapid Traverse roof rack system installed in the roof of our Camry, we'll begin our test fit by placing the cargo box up onto the vehicle's load bars. After positioning the clamps to fit over the bars, we can unlock the box and open the lid, exposing the two closest knobs. We'll then turn the knobs to tighten on the clamps around the bars. Now this box does feature the AcuTight Mounting Hardware, which will notify you when the clamps have been fully tightened down when the knob starts to click. We'll then move to the other side of the vehicle and repeat the same process.



Thule Force XXL Rooftop Cargo Box Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry, we'll be test fitting the Thule Force XXL Rooftop Cargo Box with 21 cubic feet of space, AeroSkin black in color, part number TH626. With the Thule Rapid Traverse Roof Rack System installed on the roof of our Camry, we'll being our test fit by placing the cargo box up on to the vehicle's load bars. After positioning the clamps to fit over the bars, we can unlock the box and open the lid, exposing the 2 closest knobs. We'll then turn the knobs and tighten down the clamps around the bars. We'll then move to the other side of the vehicle and repeat the same process. Now, this double sided opening lid will also enable you to easily load and unload your cargo from either side of the car. Once everything is all tightened down and secured, that will complete today's test fit of the Thule Force XXL, part number TH626 on our 2014 Toyota Camry. .



Thule Big Mouth Roof Bike Rack Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry we'll be test fitting the Tully Big Mouth Roof Mounted Bike Rack part number TH599XTR. With the Tully Traverse Roof Rack System installed onto our Camry we'll begin our test fit by placing the bike rack up onto the vehicles load bars. Starting at the front here we'll need to position the L-brackets that are on the front bar. You may need to loosen up the black wingnuts so that the T-bolts can fit into the slots of the L-brackets. We'll then tighten them down snug just to make sure the L-brackets stay in place. We'll move to the back of the bike rack and remove one of the wingnuts from one of the bolts. We'll position the two bolts on both the front and back side of the rear bar and then we'll swing the plate around the underside of the crossbar.



Thule Sonic XXL Rooftop Cargo Box Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry we'll be test fitting the Thule Sonic XXL rooftop cargo box with 22 cubic feet of space, in metallic silver, part number TH636S. With a Thule Rapid Reverse Roof Rack System installed on the roof of our car, we'll begin our test fit by placing the cargo box up onto the vehicle's load bars. After positioning the clamps to fit over the bars, we can unlock the box and open the lid, exposing the two closest knobs. We'll then turn the knobs to tighten on the clamps around the bars. This box does feature the AccuTight mounting hardware which will notify you when the clamps have been fully tightened when the knob starts to click. We'll move to the other side of the car, and repeat the same process. This double sided opening lid also enables you to easily load and unload the cargo from either side of the car.



Thule SUP Taxi Stand-Up Paddleboard Carrier Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry, we'll be test fitting the Thule SUP Taxi stand up paddle board carrier with a 2-board capacity, part number TH810. With the Thule Rapid Traverse roof rack already installed in our Camry, we'll place the front carrier on the front bar. We will secure it using the rubber strap. Locking it in place and tightening it down with a thumb screw on front of the carrier. We'll then move to the driver side and repeat the process. After the front is secured, we can move to the rear of the vehicle and repeat those steps.



Whispbar Roof Ski and Snowboard Carrier Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry, we're going to be test-fitting the Whispbar locking roof tops ski and snowboard carrier, with the 6-ski or 4-board capacity in silver. Its part number is WB-300. With the Yakima Q towers roof rack system already installed on our Camry, we'll begin our test fit by grabbing the front half of our carrier and placing it onto our front load bar. We'll bring the black rubber coated metal strip around the underside of our load bar, fit it into the foot of the carrier. We'll then press the large black button located here at the end, to open our top jaw. With our jaw open, we'll reach in with the black lever located on this side. This will release the small gray catch. We can then cam our black buckle closed, taking that lever down just a little bit, and press it down to secure the catch over the buckle.



Thule Traverse Roof Rack Installation - 2014 Toyota Camry

Today on our 2014 Toyota Camry we'll be test fitting the Thule Traverse Roof Rack System using part numbers THLB50, TH480 and THKIT1438. With everything assembled according to the included instructions, we'll begin our test fit with the front doors open on our car. We'll place the front load bar onto the front of our roof and we'll need to measure 9 inches from the first part of the glass here at the front window to the leading edge of our foot pack. We'll need to make this measurement on both the passenger and driver's side of the vehicle to ensure the front bar is perpendicular to the roof of our Camry and the pads contour to the roof line. With the bar in position, we can use the included tensioning tool to tighten down the silver bolt on the inside of the foot which will bring the clips up tightly against the roof line. Now, we'll need to alternate tightening down each side a little bit at a time so the bar doesn't favor one side of the vehicle. Once that's tightened down and secure, we can place the rear bar onto the rear of our roof. We'll then need to measure the load bar spread.



Thule AeroBlade Traverse Roof Rack Installation - 2014 Toyota Camry

Today on our 2014 Toyota Camry, we'll be test fitting the Thule Rapid Traverse Roof Rack System using part numbers THARB53, TH480R, and THKIT1438. With everything assembled according to the included instructions, we'll begin our test fit by placing the front load bar onto the front of our roof. We'll then need to measure 9 inches from the leading edge of the windshield here to the first part of our foot pack. We'll need to make this measurement on the passenger and driver side of the vehicle, which will ensure the front load bar is perpendicular to the roof of our Camry. With the bar in position, we can use the included tensioning tool to tighten down the silver bolt, which will bring the clips up tightly against the door jam. We'll need to tighten down each side a little bit at a time so the bar doesn't favor one side of the vehicle. With this done, we can move to the back of the car and place our rear load bar onto the rear of our roof. We'll then measure the load bar spread.



U-Ace Kagu Custom 2nd Row Floor Liners Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry we'll be installing the U Ace 3D Custom Kagu Auto Floor Liners for the rear in grey part number L1TY08621501, also available in tan, part number L1TY08621502. With our factory floor mats already removed from our vehicle we'll begin our test fit by placing our mat down here onto our floor. We'll push down firmly all the way around. We allow those MAXpider fingers to fit in and grip our carpet and really hold it in place. As you can see here the rear mat is sold as a one-piece liner so you get full coverage even over your center hump. As you can see you've got your raised containment wall, again that goes all the way around the outside of the mat perimeter wise. That's going to help keep any spills on the mat and not onto your carpet. The precision molded mats are going to give you maximum coverage area.



Yakima Q Tower Roof Rack Installation - 2014 Toyota Camry

Today on our 2014 Toyota Camry we're going to be test fitting the Yakima Q Towers Roof Rack System using the 58" Round Bars. We'll use part numbers Y00409, Y00605, Y00716 and Y00124. With our rack assembled according to the manufacturer's instructions, we'll begin our test fit by opening our front door and placing the front half of our roof rack onto the front roof line. Per the Yakima fit guide we'll measure 8" from the rear edge of our windshield to the leading edge of our foot pack. We'll do this measurement on both sides to be sure we have our feet in line with each other. With both of our feet in line we'll now pull down on the black lever located on each foot pack to secure our clips around the underside of our roof line. With the front half of our rack secure we'll close our front doors, open our rear doors and grab the rear portion of our rack. We'll place it onto the rear portion of our roof.



Kuat TRIO Roof Bike Rack Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry, we'll be test fitting the Kuat TRIO Roof Mounted Bike Rack, part number RU01. With the Thule Rapid Traverse Roof Rack System installed on the roof of our Camry, we'll begin our test fit by placing the bike rack directly onto our vehicle's load bars. I'm going to start with the back and remove one of the black wing nuts from the black bracket. I'll position the black bracket around the underside of the rear bar and insert the bolt into the hole of the bracket and reinstall the wing nut. I'm going to keep it loose just in case I need to make any adjustments. Now at the front, I'll take the rubber coated U-bolts to go around the underside of the front bar up into the pre-drilled holes of the bike rack. I'll take the cylinder nuts and thread them down onto the threads of the U-bolts. I'll use the included tightening tool to tighten down the cylinder bolts around the U-bolts.



Yakima RocketBox Pro 11 Rooftop Cargo Box Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry, we're going to be test fitting the Yak Morocco box pro 11. A rooftop cargo box with 11 cubic feet of storage space in black, part number Y07193. With our Yak on the Que towers refract system already installed, we'll begin our test fit by placing our cargo box directly onto our crossbars. We will position each one of our clamps just in front of our crossbar. Then we can slide the box rearward, being sure that the lower portion of our clamp goes around the underside of those bars. With all of our clamps going around the underside of our bars, we'll now take a quick look to be sure we have the box centered. We will then open the passenger side, reach in and tighten the two red T-handles located closest to us.



Yakima FatCat Ski and Snowboard Carrier Review - 2014 Toyota Camry

Today in our 2014 Toyota Camry we're going to be test fitting the Yakima FatCat 6, a locking root top ski and snowboard carrier with a six ski or four board capacity. Part number Y03088. With the Yakima Q-Towers Roof Rack System already installed on the Camry, we'll begin our test fit by grabbing the front half of our carrier, placing it onto our front load bar. We'll bring the black rubber-coated metal strap around the underside of our load bar, fit it into the foot of our carrier. We'll reach in and lift the small black lever located inside of here. This will release the small gray catch allowing us to cam our black buckle closed. We'll then tighten that black lever down slightly and push it into its down position to secure the gray catch over our buckle. With this side tight, we'll now make our way around to the driver's side.



Yakima Q Tower Roof Rack Installation - 2014 Toyota Camry

Today on our 2014 Toyota Camry, we are going to be test fitting the Yakima Q Towers roof rack system using the 48 inch round bars. We'll use part numbers Y00408, Y00605, Y00716 and Y00124. With our roof rack assembled according the manufactures instructions, we'll begin our test fit by opening the front doors of our Camry and grabbing the front half of our rack. We'll place it on to the front roof line of our vehicle. For Yakimas fit guide, we are going to measure 8 inches from the rear edge of our wind sheield to the front edge of our foot peg. We want to take this measurement on both sides to be sure that we have our feet in line with each other. With our measurement done on both sides, we'll now pull down on the black levers which will tighten our clips around the underside of our roof line securing our rack to our vehicle. With the front hatch secure, we'll shut our front doors, open our rear doors and grab the rear half of our rack. We'll place it on to the rear portion of our roof.



U-Ace 3D Kagu Custom Front and Rear Floor Liners Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry we will be installing the U-Ace 3D Custom Kagu auto floor liners for the front, and rear, and gray. Part number L1TY08601501. Also available in tan part number L1TY08601502. With our front mat removed we're going to begin our test fit by placing our new U-Ace liner right up there into position. As you can see this mat is custom designed with the factory anchor points to where they'll have the spots where we can lock those in. We'll press down firmly all the way around our mat to be sure we have it seated properly. These custom fit 3 layer floor liners will protect your vehicles carpet from dirt, mud, snow, rain, anything like that.



Yakima RocketBox Pro 14 Rooftop Cargo Box Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry we're going to be test fitting the Acura Rocket Box Pro 14, a rooftop cargo box with 14 cubic feet of storage space in black, part number Y07912. With our Yakima Cue Towers roof rack system already installed on our Camry, we'll begin our test fit by placing our cargo box directly onto our cross bar. We'll position the clamps just in front of our cross bars, then we can slide the box rearward, being sure that the lower portions of our clamp go around the underside of our bars. With all four clamps around the underside of our bars, we'll take a quick look to be sure we have our box centered. We'll then open the passenger side, reach in and tighten the two red T handles located closest to us. A great feature of the Rocket Box Pro 14 is its ability to open from both the passenger and the driver side.



Yakima FrontLoader Roof Bike Rack Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry. We're going to be test fitting the Yakima Frontloader. A wheel mount roof bike rack, part number Y02103. With our Yakima Q Tower Roof Rack system already installed in the Camry. We'll begin our test fit by placing our bike rack directly onto our load bars. As we do this, we want the two outer portions of our front clamp to go in front of our bar, and the single center portion of our front clamp to go behind it. We'll then turn the black T handle located on the front of the rack, this will secure our clamp around our bar.



Yakima ForkLift Roof Mounted Bike Rack Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry, we're going to be test fitting the Yakima Forklift, a fork mount roof bike rack, part number Y02098. With the Yakima Q Towers roof rack system already installed on the Camry, we'll begin our test fit by placing our bike rack directly onto our load bars. Here at the front, we're going to remove the skewer which is reverse thread. Slide back the black plastic cover. Loosen the black T handle and remove the T bolt from the slide in the lower portion of the clamp. We'll then bring that portion around the underside of our load bar, reinsert our T bolt and tighten down our black T handle to secure our clamp. We'll then slide our black plastic cover forward and reinsert our skewer.



Yakima Roof Rack Fairing Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry we're going to be test fitting the 44" fairing for Yakima roof racks, part number Y07048. With our Yakima Q Towers Roof Rack System already installed on the Camry we'll begin our test fit with both wing nuts and carriage bolts removed from our fairing. We'll then place it in front of our front load bar and start bringing our clips around our bar. With all four of our clips around we'll now take a quick look to be sure we have our fairing centered. We'll then go to the outside clamp on the driver side, place our carriage bolt down through the top of the clamp being sure that it engages both the top and the bottom, then secure it underneath using the wing nut. With our driver side secure we'll now make our way around to the passenger side, repeat that same tightening process, and just like that we're ready to head down the road. That will complete today's test fit of the 44" Yakima fairing, part number Y07048, on our 2014 Toyota Camry. .



Michelin Stealth Wiper Blades Installation - 2014 Toyotca Camry

Today on our 2014 Toyota Camry, we're going to be test fitting the Michelin Stealth Hybrid Style Soft Shell Wiper Blades. For the driver's side, we'll use part number MCH8026, and for the passenger's side, MCH8018. Our first step is going to be remove our existing wiper blade. This uses a locking lever-style catch here, so we'll simply take a screwdriver and pop that up, then we'll slide our blade down the wiper arm, and remove it. This has a J-style wiper arm here, and we'll seat our wiper blades up into that hook as we install them. Now take our new Stealth wiper blade. As you can see, there's a squared off edge, and then a rounded edge. The rounded edge is the one that we're going to want to put up into the thread of our J hook here, so we'll place that down, slide it in, and press it firmly until we hear it click into place. With our driver's side installed, we'll now move around to the passenger's side, and take care of that one.



Michelin Stealth Ultra Wiper Blades Installation - 2014 Toyota Camry

Today on our 2014 Toyota Camry, we're going to be test fitting the Michelin Stealth Ultra Wiper Blades. These are a beam style, with a hard back cover. For the driver's side, we'll use part number MCH8526, for the passenger's side, we'll use part number MCH8518. To begin our installation of our blades, the first thing we're going to want to do is remove our existing or our factory wiper blades. This has a lever-style lock right here, so we'll just take a small screwdriver, pull up on it to release that lever. We'll then slide our blade down our wiper arm, and release it from the J hook style arm that we've got here. We're now going to take our new Stealth Ultra wiper blade, and we're going to see inside of our top of our wiper blade here. We've got a square side, and then on this side it's a little more rounded.



Michelin RainForce Wiper Blades Installation - 2014 Toyota Camry

Today on our 2014 Toyota Camry, we're going to be test-fitting the Michelin RainForce frame-style wiper blades. For the driver's side, we'll use part number MCH3726, and for the passenger's side, part number MCH3718. To begin our installation, we're going to want to remove our existing wiper blade. As you can see, it's got a lever-style lock right here for it, so we'll just pop that up with our screwdriver. We'll then slide the wiper blade down the wiper arm. As you can see, this is a J-hook style wiper arm, so as we install our new blade, we'll be sliding it up into the throat of the J-hook. We've got our new blade here, and, as you can see, one side of it's pretty squared off, while the other side's rounded.



Husky WeatherBeater Front and Rear Floor Mats Review - 2014 Toyota Camry

Today on our 2014 Toyota Camry, were going to be test fitting the Husky Liners WeatherBeater Custom Auto Floor Liners with the front and rear in black, part number HL98901. Also available in gray, part number HL98902, and in tan, part number HL98903. Now with our factory floor mat removed from our Camry, were going to begin our test fit by grabbing our new Husky Liner and sliding it up into position. As you can see, it has the grommets already in place for your factory anchor points, be fit a little more snug in the factory mats do. Once we have our factory anchor points secure, well just push down firmly all the way around the edge of the mat. Its going to allow those nibs on the back to really dig in to our carpet and secure it in place. As you can see, the custom-molded floor liners contour perfectly to your vehicle.





2014 Toyota Camry Questions and Answers