Custom Fit 2012 Ford F-150 Accessories

I do have a way for you to install a 7-way trailer connector on your 2012 Ford F-150 but the plug in the photo you attached does not have all of the circuits needed for a 7-way trailer connector so there is not one that plugs directly into this.…

For your 2012 Ford F-150 FX4 SuperCrew 4x4 you will need RoadActive Suspension system #RAS3611-Y. This model is for 4x4s but excludes regular cab models as well as the Raptor. The other one, #RAS3611, is for 2-wheel drive models and only fits…

I spoke with the folks at RoadActive Suspension and was told that because the RAS system sits within the footprint of the leaf springs, it will not interfere with the sensors for the Auto Headlight feature, but you will need to move the adjustable…

In order to add a 7-Way trailer connector and brake controller to your 2012 Ford F-150 with the 4-Way flat wiring harness you will need a few items. The first is a 4- to 7-Way adapter, #37185. It is essentially the same as the 47185 that you…

It sounds like you have some wiring issues with the Tekonsha Primus IQ Trailer Brake Controller part #TK90160. The clicking noise is caused by the brake controller turning itself off due to a short detected. Therefore, you will need to check each of…

In order to install a 7-way trailer connector and brake controller on a 2012 Ford F-150 you will first want to start with a 4-way trailer connector, the Replacement OEM Wiring Harness for Ford F-150 part #C56110 which is plug and play. Once we have…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

I have two recommendations, the best option will depend on the type of road surface you typically find yourself on. The Titan V-Bar chains, part #TC3829 feature integrated V-bars that really bite into icy road surfaces. The Titan #TC3229S square link…

The hitch option you'd need will depend on your bed length. If you have the 8 foot bed, the #BWRVK3200 you'd looked at would be perfect along with the #BWRVK2404 install kit. If you have a 6-1/2 foot 'standard' bed, you'll need a…

I have a solution for you to add air bags compatible with an in bed 5th wheel hitch to your 2014 Ford F-150, but the AirLift #AL88396 are not compatible with the F-150; these air bags are designed for Super Duty trucks like the F-250 and F-350.…

I believe you are asking about wiring for a third brake light on your Leer camper shell on a 2012 Ford F-150 (there isn't any type of wiring harness for a Leer camper shell we can offer), and for that, all you need to do is use a simple part: -…

You will not need additional diodes when installing the Demco SBS Stay-IN-Play DUO Supplemental Braking System #SM99251. The 10 amp diode that come with the kit are only needed if your tow wiring harness is not diode-protected. Since yours is not,…