2011 Jeep Jeep Windows

Change Make

Select Vehicle Model

  
Jeep Windows

Available Models for 2011 Jeep Jeep Windows


Jeep Windows

Need to replace a damaged window or upgrade your Jeep? We have rear and side windows from Bestop made from premium fabrics and materials that will be a perfect fit. They are rugged enough to withstand the elements while protecting your Jeep.

View the complete list of windows by entering your year, make, and model to the left.



Accessories



2011 Jeep Questions and Answers


  • How to Iinstall a Brake Controller on a 2011 Jeep Grand Cherokee Overland
  • To install a brake controller on the 2011 Jeep Grand Cherokee you will most likely have to hard wire. From the information I was able to obtain there is a brake controller connection point but the connector is not available aftermarket. If a connector is supplied it will be in one of two locations. The first is under the dash just to the left of the steering column. The second is behind the drivers side kick panel next to the emergency brake pedal. If you find the connector you will...
    view full answer...

  • Recommended Tire Chains for 265/50R20 Sized Tires on 2011 Jeep Grand Cherokee Overland
  • According to an onilne copy of the 2011 Jeep Grand Cherokee's owner's manual, tire chains should only be installed on the rear tires. It also states to not exceed 30 miles per hour and use chains that are Class S compatible. For a set that matches this criteria and will fit your 265/50R20 sized tires I suggest the Titan Chain Alloy Snow Tire Chains # TC2326. These chains install manually but use tensioners to assist with adjustment and tighten them on your tires. They're also made...
    view full answer...

  • Are Fuses Needed on a 2011 Jeep Grand Cherokee to Activate the Factory Tow Package Trailer Wiring
  • If your 2011 Jeep Grand Cherokee has the Tow Package installed from the factory but there is no 7-Way or 4-Way connector at the rear of the vehicle, see photos in instructions link, you can add the 4-Way connector, item # 118384, inline with the factory 7-way connector, located behind the rear bumper on the drivers side. To get all of the taillight functions to work properly you would then need to go to the dealer and have them program the computer to activate the brake and turn signal...
    view full answer...

  • How to Adjust Hitch Height of RV To Allow Vehicle to Flat Tow with Tow Bar Level
  • Sounds like what you are looking for is a high low adapter like part # RM-070 which will allow you to raise or lower the hitch height by 4 inches. I also attached a link below that shows how to pick out the correct high low adapter as well.
    view full answer...

  • Can a 1-1/4 Inch Bike Rack be Used in a 2 Inch Trailer Hitch Receiver
  • You can still use your 1-1/4 inch bike rack with a 2 inch trailer hitch receiver. The first thing I would check is to see if there is an adapter sleeve or alternate shank that is designed specifically for your bike rack in order to use it in a 2 inch hitch. This would be the most ideal way to adapt the bike rack to fit the new hitch. If a specific adapter is not available, you can use a reducer sleeve to convert the 2 inch hitch to a 1-1/4 inch for times when you want to use the bike...
    view full answer...

  • Parts Needed To Flat Tow a 2011 Jeep Wrangler Unlimited
  • From the information I was able to obtain, the 2011 Jeep Wrangler Unlimited does not require a transmission lube pump to be flat-towed. You will still need to check your owners manual or with your Jeep dealer on flat towing the vehicle. Some vehicles require an axle disconnect, drive line disconnect, or free wheeling hubs in order to be flat towed. To complete your towing setup, you will also need a base plate kit, tow bar, safety cables, wiring or lighting, and a supplemental braking...
    view full answer...

  • Parts Needed to Flat Tow a 2011 Jeep Wrangler Behind an RV
  • The first thing you will want to do is consult the vehicle owners manual to determine how the vehicle should be towed and if any additional equipment or special procedures are required. There are 5 items you will need to flat tow a vehicle. First you will need base plates. There are several options for a 2011 jeep Wrangler depending on the bumper you have. I have included a link to them for you. The next item you will need is a tow bar. If you go with Roadmaster base plates, the most...
    view full answer...

  • Universal Towing Mirror Recommendations for a 2011 Jeep Grand Cherokee
  • At this time, the best option to add towing mirrors to a 2011 Jeep Grand Cherokee is to use a universal towing mirror. The most popular universal towing mirror is CIPA Clip-On Mirror, # 7070 This mirror is more adjustable than most other mirrors. The glass can be moved and it has adjustable pads to better fit the contours of the factory mirror housing. I have included a link to a video review of this mirror for you. The Dual-View Clip-On Towing Mirror, # 11953, is another popular universal...
    view full answer...

  • LED Stop Turn and Tail Signal Lighting for a Motorcycle Pull Behind Trailer
  • To meet DOT standards you will need to have both a left side and right side blinker on your motorcycle trailer. The LED Stop/Turn/Tail Light, item # STL69RRXB, is not separated so that the left side of the light and right side of the light can blink separately, so you will need two of these lights to complete your lighting setup. I have seen many motorcycle trailers with two of the Sealed, 6-1/2 inch Oval, LED Trailer lights, item # STL22RB, mounted next to each other at the back of...
    view full answer...

  • Comparing Curt Trailer Hitches for a 2011 Jeep Grand Cherokee
  • The difference between Curt trailer hitches # C13065 and # C13182 is basically how visible each one is once installed on a 2011 Jeep Grand Cherokee. If you want the most hidden trailer hitch then go with # C13065. Only the receiver is visible as you can see in the picture I have provided. For hitch # C13182, part of the cross tube will also be visible along with the receiver. To complete your towing set up I recommend etrailer ball mount kit # 989900. It includes 2 ball mounts, 2...
    view full answer...

  • Where is the Connection Point For Trailer Wiring Harness # 118384 on a 2011 Jeep Liberty
  • The Tow Ready Custom Fit Vehicle Wiring, # 118384, is designed to fit if your 2011 Jeep Liberty already has a factory 7-Way and you want to replace it with a 4-Way. The connection point is located behind the factory installed 7-way trailer connector, or up by the spare tire of the Jeep Liberty (GM Jeep Liberty only). I have included a link to the installation details for reference. If your Liberty did not come with a factory 7-Way trailer connector, you will need to use Draw-Tite Custom...
    view full answer...

  • What Backup Alert Will Fit a 2011 Jeep Wrangler with 3157 Bulbs
  • A 3156 and 3157 bulb will fit in the same slot on a vehicle. The difference is a 3157 bulb has a dual intensity feature and 3156 does not. Since the Hopkins Backup Alert, # HM20101VA, is for a reverse light, a dual intensity bulb is not needed and you can use it in place of a 3157.
    view full answer...

  • Is there a Quick Connector Trailer Wiring Harness Available for a 2011 Jeep Grand Cherokee
  • The T-One wiring kit, item # 118425, is a quick T-connector kit that installs inline with the vehicle taillight wiring and does not require splicing into the vehicle factory wiring. This connector will provide a 4-Way trailer connector at the rear of your 2011 Jeep Grand Cherokee. The hardest part about installing this wiring harness is accessing the wiring at the rear of the vehicle taillights. We have a video of the # 118425 Harness being installed on a 2007 model which will be very...
    view full answer...

  • Does a 2011 Jeep Wrangler Unlimited Require a Brake Light Relay when Being Flat Towed
  • To determine if your 2011 Jeep Wrangler Unlimited needs a brake light relay, there are three things to consider. All three of these have to be true for your vehicle to necessitate a brake light relay. If you use the towed vehicles brake light as both the brake signal and the turn signal for towing (combined system); if a supplemental braking system that either pushes or pulls on the brake pedal has been installed; and with the ignition off, the towed vehicles brake lights illuminate...
    view full answer...

  • Recommended Towing Mirrors For 2011 Jeep Grand Cherokee
  • For your 2011 Jeep Grand Cherokee, I recommend the K-Source Universal Dual Lens Towing Mirrors - Clip On - Pair, # KS3990. These mirrors have dual adjustable mirrors to expand your view. They have a clean plastic housing to resist corrosion and rust and give it a nice, sleek look. These mirrors simply use adjustable clips on one side of your factory mirror and use heavy duty rubber ratcheting straps to secure it in place and reduce vibration on the back side. There is a quick release...
    view full answer...

  • Rhino Rack Kayak Carrier and Roof Rack for a 2011 Jeep Patriot with Factory Raised Rails
  • When using the Rhino-Rack J-Style Kayak Carrier, # S512, on your 2011 Jeep Patriot with factory raised side rails and no cross bars, you can use the Thule locking roof rack # TH45050. I have linked a video showing installation of this roof rack for you.
    view full answer...

  • Can I Flat-Tow 2011 Jeep Liberty w/1999 Ford F-350 That Has In-Bed Camper Overhanging Past Tailgate
  • You will first want to determine if it is acceptable to flat-tow your Jeep. From the research I found, some of the 4-wheel drive Jeep Liberty models may need additional parts or may not be able to be flat-towed. You will want to consult your Jeep dealer or vehicle owners manual to make sure it is acceptable to flat-tow your Jeep. If you find that it is safe to flat-tow your Jeep, there is a way to use your 1999 Ford F-350 with the camper in the truck bed to flat-tow, but you will need...
    view full answer...

  • Rear Wiper Blade Recommendation for 2011 Jeep Grand Cherokee
  • I checked with Rain-X and they do not offer a Latitude for the rear of your 2011 Jeep Grand Cherokee. For a similar Michelin that has been confirmed as a fit you would want the Michelin Rear Windshield Wiper Blade # MCH9512. I attached an install video that shows this blade installed on a similar 2012 Grand Cherokee as well.
    view full answer...

  • Is Trimming of Plastic Bumper Shroud Required for Hitch Installation on a 2011 Jeep Grand Cherokee
  • When installing the Curt Class III Trailer Hitch, # C13182, on your 2011 Jeep Grand Cherokee, the plastic shroud will not need to be trimmed. At this time we have not had the opportunity to install a Curt hitch on the 2011 Grand Cherokee, so I called my contact at Curt Mfg. and they do not have a photo of this hitch installed on a Grand Cherokee either. I was able to obtain a drawing that shows the location of the hitch in relation to the rear fascia on the Grand Cherokee though,...
    view full answer...

  • Tie-Down Anchor Points for 2011 Jeep Grand Cherokee with Factory Roof Rails
  • I may have a solution for you to tie-down the Advantage Cargo Bag # HE3021 you were looking at, but you will need to measure the channel dimensions of the roof rack on your 2011 Jeep Grand Cherokee to confirm fit. The Eyebolts for Rhino-Rack Aero/Sportz Crossbars # S604 have a square piece that installs in the channel that measures 13/16" by 13/16". This fits most roof rack channels so there is a great chance it will work well for you. I have linked both the above mentioned products...
    view full answer...

  • Does The Draw-Tite Class III Hitch # 75699 Fit Under The Bumper On A 2011 Jeep Grand Cherokee
  • The Draw-Tite Class III 2 Inch Hitch, part # 75699, will install under the bumper on your 2011 Jeep Grand Cherokee. I am including a picture to the right that will show the proper position of the hitch on a Jeep Grand Cherokee. Also, I am including a link to the installation instructions for the Draw-Tite hitch. If you will be towing with this hitch you will want to check your owners manual or the Jeep dealer for the towing capacity of your 2010 Jeep Grand Cherokee. To complete...
    view full answer...

  • Options for Adding Lights to Flat Tow a 2011 Jeep Grand Cherokee Behind a Motor Home
  • I do not have specific information on a 2011 Jeep Grand Cherokee and diodes. The diodes simply act as a gate and gate keeper, letting the signals pass through one way so that it does not back feed and damage the electrical system. Another option is to use a light kit. We have several to choose from depending on how you want to mount them. I would recommend going with either the magnetic kit, # C-ATL20A, or the E-Z mount kit, # EZT20B. No drilling, no cutting and splicing wires are involved. I...
    view full answer...

  • Recommended Custom Tail Light Wiring Kit for Flat Towing 2011 Jeep Liberty
  • The Hopkins Custom Tail Light Wiring Kit for Towed Vehicles # HM56204 is a confirmed fit for your 2011 Jeep Liberty. It has integrated diodes to prevent feedback for safe operation and plugs right in to your victory wiring and the tail lights of your vehicle. Your vehicle does not require a battery disconnect kit.
    view full answer...

  • Does Computer on 2011 Jeep Grand Cherokee have to be Reprogrammed to be Able to Tow
  • One of my coworkers has a 2012 Jeep Grand Cherokee which is the same generation as your 2011. When we went to install a 7-Way trailer connector on it the vehicle did have to be reprogrammed by a Jeep dealer. The Jeep should have the wiring there to add a 7-Way but it would not be fully functional unless the BCM was flashed by a dealership. You will not have to do this if you were to add a 4-Way trailer connector. If you plan on doing some towing in addition to the trailer hitch, # C13065,...
    view full answer...

  • Best Location To Install Brake Controller On 2011 Jeep Grand Cherokee
  • There is no specific location for mounting a brake controller. It does need to be out of the way, but needs to be close enough that the driver can operate it easily. Typically, a brake controller is mounted on the under side of the dash on either side of the steering wheel. You will want to make sure it is easy to operate while driving and that when you install the controller you do not damage any wiring behind the dash. I have attached a video that shows a brake controller installation...
    view full answer...

  • Will the Thule T2 Trailer Hitch Mount Bike Rack Clear the Spare Tire on a 2011 Jeep Wrangler
  • What you will need to do to determine if a Thule T2, or any bike rack or accessory, will clear the spare tire on your 2011 Jeep Wrangler, is to take 1 measurement. Measure from the center of the hitch pin hole straight back to the distance required to clear the spare tire. I have included a link to an FAQ article to help. The Thule T2 Classic for 2 inch hitches, # TH9044, measures 19 inches from the center of the hitch pin hole to the closest bike carrier rail when in the down position....
    view full answer...

  • Parts Needed to Flat Tow a 2011 Jeep Wrangler Unlimited
  • Actually when you flat tow a vehicle you want to have the steering wheel unlocked so that it can turn freely when the tow vehicle is turning. Otherwise the front tires would scrub and put a lot of strain on the steering of the vehicle and the flat towing components. You will need to consult the owners manual of your Wrangler to determine what procedures are recommended when flat towing your vehicle. For a base plate kit you would want the part # BX1126 which would work well with the...
    view full answer...

  • How Low does the Curt Hitch C13065 Hang on the 2011 Grand Cherokee
  • I spoke with my contact at Curt Mfg. and was informed that there are definitely no clearance issues related with the hitch and that the hitch, once installed will sit just under the rear fascia on the 2011 Jeep Grand Cherokee. They did not have the height measurement for the hitch but provided the following information. The receiver will be positioned level at the back of the vehicle and will not point down at all. If your trailer tongue is higher than the hitch when the trailer frame...
    view full answer...

  • Custom Fit Seat Covers for a 2011 Jeep Grand Cherokee Laredo
  • There are numerous custom fit seat cover options available for the 2011 Jeep Grand Cherokee Laredo. I have included a link to them for you. If you like the tan covers like you have referenced, the rear set would be # SS7429PCTN. The front set would be # SS2438PCTN. The rear set will include a cover for the entire second row. The front set includes both driver and passenger side covers.
    view full answer...

  • Will Bestop Premium Tinted Window Kit # B5813535 Fit Factory Soft Top, 2011 Jeep Wrangler Unlimited
  • The item you selected, Bestop Premium Tinted Window Kit, part # B5813535, will fit the factory soft top on your 2011 Jeep Wrangler Unlimited 4-door. Part # B5813535 is the Black Diamond color.
    view full answer...





^
About Us
photos and videos
1,056,204 Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570 Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511 Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+ Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
73 Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357 Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.