Dodge Ram Pickup Roof Rack

Rola Rail Extreme DFE Series Roof Rack Installation - 2009 Dodge Ram Pickup

Thule Roof Rack Review - 2007 Dodge Ram Pickup

Today on our 2007 Dodge Ram, we're going to be doing a test fit of the Thule AeroBlade Roof Rack System. As you can see, we've already got one of them up on our vehicle, so you can see what the front cross bar would look like. We're going to show you how to place on that rear cross bar, and how everything fits together. You're going to have your AeroBlade, which is going to be part number THARB60. Your foot pack or your pedestal, which is going to be part number TH480R, and then your fit kit, which is also going to have your mounting bracket, which is already up on the vehicle. We'll show you how that goes in, as well as the foot pad and the clip that mounts to the bracket.

Whispbar Flush Bar Roof Rack Installation - 2013 Dodge Ram Pickup

Today on our 2013 Dodge Ram Pickup well be test fitting the Whispbar Flush Bar Roof Rack System using part numbers wb-s11 and wb-k548. With our roof rack system assembled according to the instructions, well begin our test fit by opening both front doors. Well place our front bar onto the front part of our roof. To ensure that we have this in the correct location, we need to measure 30 centimeters from the door jamb to the center of our foot pack. Well do this measurement on both the passenger and driver side of the vehicle to make sure that our feet are in line with each other. Well then use the included Allen key to tighten down the Allen bolt which will secure each foot pack.

Whispbar Through Bar Roof Rack Installation - 2013 Dodge Ram Pickup

Today on our 2013 Dodge Ram Pickup well be test fit in the Whispbar Through Bar Roof Rack system using part number WB-S18 and the Custom Kit for Whispbar Flush Bars part number WB-K548. Weve already got our roof rack system assembled according to the instructions. To begin our test fit well go ahead and place our front bar on to the front part of our roof. To ensure that we have it in the correct location we need to measure 30 centimeters from the doorjamb to the center of our clamp. Well do this on both the passenger and driver side of the vehicle to measure are fit or in line with each other. Once we have our bar in the correct location we can then use the included Allen key toll to tighten our bolt which will secure our bar in place.

Rhino-Rack 2500 Series Aero Roof Rack Installation - 2013 Dodge Ram Pickup

Today on our 2013 Dodge Ram 1500, we'll be test fitting the Rhino-Rack 2500 Series roof rack with Aero crossbars, 59" inches in length, black in color, part numbers DA1500B, and DK043. We'll begin our test fit by placing the front crossbar onto the front of our roof. We'll then need to measure from the center of the door jam to the center of our crossbar. We'll measure this on both the passenger and driver's side of the vehicle to ensure the front crossbar is in its correct position. Once we've established this position, we can use the included Allen key to tighten down the black bolts on the inside of the feet, to secure the front crossbar to the front of our roof. Now you may want to alternate when tightening it down so that one foot doesn't favor one side of the vehicle.

Yakima Q Tower Roof Rack Installation - 2013 Dodge Ram

Today on our 2013 Dodge Ram 1500, we'll be test fitting the Yakima roof rack system. We'll be using the 58" cross bars, part number Y00409, the Yakima Q towers, part number Y00124, and the Q clips specific to this vehicle, part number Y00607. Now we already have our cross bars assembled according to the instructions, and we're ready to fit them up on our vehicle. The first thing we need to do is open the driver and passenger side doors in the front. We'll set the front cross bar assembly up on top of our roof and get it into position. To position it properly, we need to measure 10" from the leading edge of the Q tower base to the edge of our windshield glass.

Yakima Q Tower Roof Rack Installation - 2009 Dodge Ram 1500

Today on this 2009 Dodge Ram 1500 Quad Cab, we are going to be test fitting a Yakima Q Tower roof rack system. We will be using a 4-pack of the Yakima Q Towers along with the Q7 clips on both the front and rear crossbars. We will also be using Yakima 58-inch round crossbars. We already have our crossbar assemblies put together and ready to install. So, first, we will open up the front doors, so we can position the front crossbar. To position the crossbar, we will need to measure 10 inches from the edge of the windshield to the edge of our Q Tower. Once we have the crossbar into position, we can go ahead and set our towers and lock them down. You will also want to check your position and make sure that the crossbar is even on both the passenger side and driver side. You do not want to have to force the door closed, but you do want it good and snug. Once we have the front crossbar in position, we can go ahead and get ready to install the rear. 0:52

Yakima Q Tower Roof Rack Installation - 2004 Dodge Ram 1500

Today on this 2004 Dodge Ram 1500 Quad Cab we are going to be installing a Yakima Q Tower roof rack. We already have our crossbar assemblies put together so we are ready to start fitting them on our vehicle. The Q Tower clips fit around the door frame of our vehicle to hold the rack into place. So before we place the crossbar assembly up on top of the truck, we will need to go ahead and open the front doors. 0:24

Yakima FrontLoader Roof Bike Rack Review - 2013 Dodge Ram

Today on our 2013 Dodge Ram pick-up truck 1500 we are going to be testing the Yakima FrontLoader roof mounted bike carrier for part number Y02103. To mount this bike rack up on top of our vehicle, we are going to set it on top of the front cross bars. Well use the hand knob on the front of the bike rack to tighten down the front clamp around the cross bar. In the rear, we are going to use the wing nut, T-Bolt and the clamp to secure the rear half of the bike rack around our rear bar. With both clamps secure our bike rack is mounted and were ready to load up. To load our bike the first thing we need to do is open up the front wheel hoop all the way.

Thule Roof Cargo Carrier Review - 2007 Dodge Ram Pickup

Today on our 2007 Dodge Ram, we're going to be doing a test fit of the Thule Canyon roof cargo basket, part number TH859. This roof basket is going to be 49 inches long, 40 inches wide and 6 inches deep. It's going to have a 150 pound weight capacity with a sturdy steel construction. If you'd like to, you can put a 20 inch extension in it which is going to be part number TH8591. As you can see, we've already got three of our feet installed onto our Thule aero blades and we're going to show you how to put on that last one. Just make sure that before you put it up on your vehicle, that you adjust the feet using the Allen tool included and you're going to adjust those to whatever your crossbar spread is. Just take a tape measure and measure it out.

Yakima RocketBox Pro 11 Rooftop Cargo Box Review - 2013 Dodge Ram Pickup

Today on our 2013 Dodge Ram Pickup we'll be test fitting the Yakima RocketBox Rooftop Cargo Box 11 cubic feet in black, part number Y07193. For easiest installation, it would be best to pre-measure your crossbar distance and then set your mounting brackets with the RocketBox according to that distance. With the Whispbar Roof Rack System assembled and mounted onto our vehicle, we'll begin by placing our RocketBox directly onto our crossbars. Once we have it situated, we can make sure that the feet hanging out of the bottom go around our crossbars. With all of our clamps around the appropriate crossbars, we'll then use the hand knobs on the inside of the box to tighten down each clamp. Once we have all four clamps tight, we then close the box, move our key to the locking position, and we're ready to go.

Yakima RocketBox Pro 14 Rooftop Cargo Box Review - 2013 Dodge Ram Pickup

Today on our 2013 Dodge Ram Pickup we'll be test fitting the Yakima RocketBox 14 cubic feet in black, part number Y07192. One of the neat features of the RocketBox is its ability to open from both sides. With the Whispbar Roof Rack System installed on our vehicle, we'll begin by placing our RocketBox directly onto our crossbars. Once we have it on, we can make sure that the feet go around our crossbars. We'll open the passenger side of the box and use the hand knobs on the inside to tighten down the two feet on this side. We'll move to the other side, open it up, and tighten the two remaining feet.

Yakima LoadWarrior Roof Cargo Basket Review - 2013 Dodge Ram

Today on our 2013 Dodge Ram pickup 1500 series truck, we'll be test fitting the Yakima LoadWarrior roof rack cargo basket, part number Y07070. With our vehicle equipped with the Yakima roof rack system and our cargo basket preassembled, we're ready to go ahead and fit it to the vehicle. We'll need to simply set the cargo basket on top of the cross bars, center it from left to right with the vehicle. We'll then secure it using the included hardware with the basket. With our basket secured, we'll go ahead and give you a height measurement added to the vehicle, and this basket will add approximately 10" to the overall height of the vehicle. With our basket secured to the vehicle, we're ready to go ahead and load it up.

Thule Pulse Alpine Rooftop Cargo Box Review - 2013 Dodge Ram

Today on our 2013 Dodge Ram Pickup, we are going to be test fitting the Thule Pulse Alpine Roof Top Cargo Box that measures 11 cubic feet, part number TH613. To install the cargo carrier, place it on your crossbars and center it in line with your vehicle. To secure your cargo carrier to your crossbars, make sure that the key is in the unlocked position, open up the cargo box, use the easy grip mounting hardware to tighten the knobs around your load bars. Once you have each clamp secured to the load bar, go ahead and close the cargo box, turn the key in the lock position and youre ready to hit the road. This concludes our test fit for the Thule Pulse Alpine Roof Top Cargo Box on our 2013 Dodge Ram Pickup. .

Thule Pulse Medium Rooftop Cargo Box Review - 2013 Dodge Ram

Today on our 2013 Dodge Ram Pickup, well get test fitting the Thule Roof Cargo Carrier, part number TH614. To install the product, begin by placing the cargo carrier on your load bars and centering it in line with your vehicle. Make sure the key is in the unlocked position and then open up your cargo carrier. With the clamps around your load bars, you can go ahead and tighten your clamps by using the easy grip mounting clamps. Tighten the clamps by twisting the grey knobs inside the cargo carrier. Close your cargo carrier and put the key back in the lock position and youre ready to hit the road.

Thule MOAB Roof Top Cargo Basket Review - 2013 Dodge Ram

etrailer Watersport Carriers Review - 2009 Dodge Ram Pickup

Today, we're doing a test fit on the etrailer kayak carrier. As far as our test vehicle today, this is a 2009 Ram 1500. This is a folding, adjustable kayak carrier, offers 150 pound weight capacity. When folded, it only adds 4-5/8 of an inch to the top of your crossbar. It's going to work with just about all varieties of crossbar out there, whether that's the square, the round, the arrow, the elliptical, or most of your factory systems.I think this kayak carrier solves a lot of problems, and that's kind of why we've designed it the way we did. We get our hands on all the different models from all the different manufacturers, and it really allows us to perfect ours.

Thule Truck Bed Bike Racks Review - 2008 Dodge Ram Pickup

Today on our 2008 Dodge Ram 2500, we're doing a test fit of the Thule Gate Mate Tailgate Pad and Bike Rack. That part number is TH824. Now we already have this laid across our tailgate. We're going to show you how to get it installed and then show you an example of to mount your items on there. To start off, we just drape this over tailgate just like so. We're going to open up our pocket here or our flap. It's going to allow us to gain access to our door here and be able to open that up.

Thule SUP Taxi Stand-Up Paddleboard Carrier Review - 2013 Dodge Ram

Today on our 2013 Dodge Ram Pickup, well be test fitting the Thule SUP Taxi Standup Paddle Board Carrier, part number TH810. To mount our carrier, well take the first half and set it up on top of the front load bar. Well feed the speed length straps around the bar and back into the heads and then tighten them down with the grey knobs. Then well take the second half of the carrier and repeat the same procedure at the rear bar. We do want to make sure that, the second half lines up nicely with the front half, so that we can properly carry our paddle board. That is it for our test fit of the Thule SUP Taxi Standup Paddle Board Carrier, part number TH810 on our 2013 Dodge Ram Pickup. .