fall hauling headquarters

Replacement Mirrors

Change Make

Select Vehicle Model

  
Replacement Mirrors

Available Models for 2010 Toyota Replacement Mirrors



What our customers are saying:

I ordered this merchandise on one day and by the time I went home from work on the next day it was in my driveway. Amazing service.

Mike

St. Louis, MO



Accessories



2010 Toyota Questions and Answers


  • Do Trailer Tires Have Speed Ratings
  • Speed is a huge issue with trailer tires actually. Unless otherwise noted trailer tires are rated as 65 miles per hour as their max speed. Exceeding the speed rating will cause the tire to heat up and fail easier. We do have a couple brands that have higher speed ratings. The Taskmaster radials like the part # C22515D which is an ST225/75R15 like you mentioned has a speed rating of 81 mph. The Lionshead part # LHWL304 has a speed rating of 75 mph and has a 2 year roadside assistance...
    view full answer...

  • Are Load Resistors Needed for LED Backup and Brake/Tail Lights
  • When changing from incandescent or halogen type bulbs to LEDs, load resistors are required. For the blinker circuits you can use load-resistors like the Putco LED Light Bulb Load-Resistors # P230004A-2 to prevent hyperflashing of the blinkers. This kit includes two resistors and connectors for installing a pair of bulbs as turn signal lamps. Check out the installation instructions I have attached for part # P230004A-2. I have also included a link to our exterior LED automobile lights...
    view full answer...

  • Why is Towing Capacity Higher on a 2010 Toyota Highlander with Factory Tow Package than One Without
  • A factory tow package can consist of several different components depending on the manufacturer. Those items could include different suspension, gearing, various coolers, and other items. The bottom line is that you have to go by what the vehicle manufacturer/owners manual says. If your 2010 Toyota Highlander did not come with the factory tow package then you are limited to the capacity specified in the owner's manual for your trim level. Having a higher capacity trailer hitch will not...
    view full answer...

  • Tracing Intermittent Short In Trailer Braking System
  • It sounds like you have an intermittent short somewhere in your braking system. The readings you are seeing are correct, because the short is intermittent. An intermittent problem can be very difficult to find, but your best bet is to physically examine the brake circuit on your trailer, from the connector all the way to the brake magnets. Look for a pinched wire, or cracked or worn wire insulation that would allow the copper conductor to intermittently contact the trailer frame and...
    view full answer...

  • Does Thule # TH958 Parkway 2 Bike Rack Include Anti-Sway Cradles
  • The anti sway device mentioned in the video isn't included with the Thule # TH958 Parkway Bike Rack, It's sold separately. To add that feature, you'd need the following parts: 2) of the Anti-Sway Cages, part # 853-7758 2) Straps, part # 852-3006-001 Or, you can go with the Thule Roadway, part # TH912XTR which is less expensive than the Parkway rack you referred to, but is actually a better bike rack. The Roadway includes the anti-sway cradles you were asking about, but also uses...
    view full answer...

  • How to Install a Prodigy Brake Controller on a 2010 Toyota Tacoma with Factory Tow Package
  • Since your 2010 Toyota Tacoma has a factory tow package, installation of the Tekonsha Prodigy Proportional Brake Controller P2, # 90885 will be very simple. Your Tacoma has a plug, tucked up under the dash, most likely left of the brake pedal. There are some panels that you will have to remove to gain access to the wiring. Find the plug, it will be the one, probably with a white connector, that is not hooked up to anything. Attach this to the corresponding end of the brake controller harness...
    view full answer...

  • Is the Required Curt Stabilizing Strap Included with Hitch # 11469 for a 2010 Toyota Prius
  • The Curt Stabilizing Strap, part # 18050, is not included with their hitches. It attaches to the bike rack then to the vehicle to keep the forces exerted on the bike rack and hitch when hitting bumps from damaging the hitch. On passenger cars this can be attached to the edge of the trunk lid that meets rear windshield or on SUVs, you can attach to the top edge of the hatch. The use of a strap is necessary for Curt warranty requirements. You can also use bungee cords like # 3044DAT,...
    view full answer...

  • Stronger, More Heavy Duty Trailer Tire to Replace 4.80-12 Tires on a Boat Trailer
  • What you could do is go up to the next highest load range. The tire will have a higher capacity and ply rating so it will be more heavy duty and last longer. Please note though that using higher capacity tires will not increase the capacity of the trailer. For a load range C tire in size 4.80-12 you can use # AM10062. It is rated for 990 pounds at 90 psi. It has a 6 ply rating. Trailer tires should always be inflated to the maximum psi indicated on the tire. The other option I would...
    view full answer...

  • FastWay e2 Weight Distribution System Recommendation for R-Pod Camper with 300 lbs Tongue Weight
  • For your tongue weight of 300 lbs the FastWay E2 Weight Distribution System part # FA92-00-0450 that you referenced would be a great option that would be rated perfectly for it. For a hitch ball you then would want the part # 40038.
    view full answer...

  • How to Use the Personal Water Craft Trailer Winch Strap On a Wave Runner
  • The 12 foot Long Personal Water Craft Trailer Winch Strap with Safety Hook by Dutton-Lainson, item # DL24291, is designed to be used with a hand winch mounted on the wave runner trailer like the Dutton-Lainson Trailer Winch, item # DL15002. There should be a bow eye on the front of the wave runner that the hook from the strap connects to and then the jet ski can be winched onto the trailer. If you need straps to tie down the rear of the jet ski, I would recommend the Erickson Inboard/Outboard...
    view full answer...

  • Bike Rack that is Quick and Easy to Remove from a Trailer Hitch on a Toyota Venza
  • There isn't a quick release set up for the Thule Roadway # TH912XTR but if you used the Kuat Beta, # B202-2, then it has a regular pin and a knob that you can loosen by hand and not have to use a wrench. This model fits 2 inch hitches only. If the hitch on your Venza is a 1-1/4 inch then # B202-114 would be the correct bike rack. These racks cost just a little more but they are super light weight at just over 12 pounds. I have linked a video review for you.
    view full answer...

  • Why Does Curt Hitch, # C12108, Need A Stabilizing Strap For Non-Trailer Loads On 2010 Toyota RAV4
  • The Class III 2 inch hitches for your 2010 Toyota RAV4 are rated for 350 lbs. tongue weight. The Class II 1-1/4 inch hitches for your vehicle are rated for 300 lbs. tongue weight. The Curt Trailer Hitch, # C12108, is a Class II 1-1/4 inch hitch that has the higher 350 lbs. tongue weight like a Class III hitch. It is strong enough to carry a bike rack, but because the Curt hitch has it rated with the higher tongue weight capacity on a 1-1/4 inch hitch they will recommend to use the Curt...
    view full answer...

  • Fifth Wheel King Pin Weight and Truck Payload Capacity
  • The hitch pin weight of 1400 lbs you stated is so close to your payload capacity, but that is not accounting for the 5th wheel hitch and rail weights or the loaded weight with cargo added. Tunda's are notorious for having a lower payload and in this case, I can't tell you it will be fine. The payload weight is spread out over the truck bed where the 5th wheel rails are mounted to the frame directly so are more secure. Unfortunately manufacturers don't test for the 5th Wheel Hitch weight...
    view full answer...

  • WIll the Yakima SingleSpeed Fit a 2010 Toyota FJ Cruiser
  • We use our huge buying power to offer the lowest prices. If you have found a lower advertised price with the same item in stock, we would like to know about it. For your help, we will refund you 110% of the difference in the delivered price (cost of product plus shipping/handling charges) within 30 days of your purchase. This offer is valid on the identical product and model number. We cannot honor competitor close-outs, liquidations, rebates, free-with-purchase offers, auctions or benefits/special...
    view full answer...

  • Wiring for Toyota 2010 Highlander with a 7-Way connector for Towing
  • You will need the Curt Class III Round Tube Trailer Hitch, item # 13534, and with the tow package you will need the T-One Connector Wiring Harness with 4 Pole Trailer Connector - Toyota Highlander, item # 118449. I would go ahead and install the 7-Way connector. We have the Brake Controller 7 & 4 Way Installation Kit, item # ETBC7, which includes everything needed to install the wiring for the 7-way connector, once you have the 4-Way installed. You mentioned a 5-Way connector and if...
    view full answer...

  • Replacing Lock Cores on Rhino-Rack Locks
  • First, you are going to need a key for the old locks. The key is needed to depress the tumblers in the locks you have. Otherwise you will not be able to get them out. What is the number on the face of the locks you have? With the key inserted you will then need access to the back of the lock. At the back there is a metal tab holding the lock in. Use a flat blade tool or knife to press that tab down while at the same time pushing the lock out from the back. To insert a new lock put...
    view full answer...

  • Adaping 4-Pole Connector to 7-Way on 2010 Toyota FJ Cruiser
  • If the trailer you are planning on towing does not have electric brakes and you simply need to provide a lighting connection for the trailer, you can very easily convert your existing 4-pole to a 7-way by using a 4 to 7-Way Adapter, part # 37185. If the trailer has electric brakes, you will need a brake controller to actuate them. I would recommend the Tekonsha P2, part # 90885. The P2 is very user friendly and the initial set up is simple. You will need the Brake Controller Install...
    view full answer...

  • Will the Rhino Rack Tracks Work with Yakima Control Towers and What Is the Length of Mounting Bolts
  • The 63 inch Rhino Rack RTC Style Roof Rack Tracks, # RTC16, come with 8 T-bolts for each track, 16 total, and each T-bolt measures 1 inch long. Although manufacturers typically do not recommend using another company's towers on their track, I went to our warehouse and pulled a set of the RT Style Rhino Roof Tracks and the Yakima Landing Pad1, #Y00221 to perform a test fit to ensure compatibility. All parts performed just as they should so yes, the Rhino Rack RTC Style Tracks will work...
    view full answer...

  • Tire Chain Recommendation for Tire Size 285/65-18
  • For the tire size of 285/65-18 that you have the Titan Chains part # TC2533 would be a great option. These are a fit for your tire size and actually come in on the larger end of the fit spectrum for your tire size since tire chains are designed to fit several different sizes. These chains are priced great, offer great traction, and are easy to install. I attached an install video for you to check out as well.
    view full answer...

  • Is there a Brake Controller Harness for a Tekonsha Voyager and a 2010 Toyota Tundra
  • There is an adapter that you can use that will simplify your installation. You can use part # 3040-P and just cut off the black connector. You will color match the cut wires from the harness to the wires on the back of the controller. Once you have these wires spliced, the controller will plug right into the Tundra. The brake controller connector should be just above the emergency foot brake pedal on the left. I have added a link to the instructions below that shows a picture of where...
    view full answer...

  • Weight Distribution/Sway Control for 2006 Fleetwood Yuma Pop-Up Towed by 2010 Toyota Highlander
  • Trailer sway and bounce can have multiple potential causes. Wind gusts from passing vehicles, rough road surfaces and trailer loading all have an effect on trailer sway. (Usually it is too little tongue weight that adds to sway.) If you install a properly-rated weight distribution/sway control system like the Pro Series # PS49901 you can reduce the effects of these road gremlins. Selection of a WD system requires knowing your total effective tongue weight. This is the combination of...
    view full answer...

  • Adjusting the Tension of a Pro Series Friction Sway Control for Weight Distribution Systems
  • There is no set amount the nut needs to be tightened on a friction sway control bar like # 83660. You will need to adjust it as needed. In the instructions, which I have linked for you, Pro Series states Trailer configurations and loading, road and weather conditions, towing speed, tire condition and pressure, and center of gravity of trailer all affect towing. To get maximum benefits from the sway control assembly, a series of road tests should be taken with the loaded trailer. On subsequent...
    view full answer...

  • Recommended Roof Weight Limit of 2010 Toyota RAV4
  • My research indicates a roof weight capacity for the 2010 Toyota RAV4 of 102-lbs, and this figure is for a factory roof rack. Always the best place to check is the vehicle owner's manual. The online version of the manual that I reviewed did indicate 102-lbs maximum on page 202. Keep in mind that this limit must include everything on the roof. Let's say you have two kayak carriers that weigh 14-lbs, such as the Rhino-Rack # S512. This 28-lbs counts toward the weight limit as will your...
    view full answer...

  • Installation Differences Between Curt, Draw-Tite and Hidden Hitch Models for 2010 Toyota Yaris
  • After looking over the installation instructions for both hitches, it appears that installing the Curt Class I receiver, part # 11060 might be a bit easier than the Draw-Tite model. The upper bolt holes for the Draw-Tite will be a bit difficult to reach, and the hitch must be rotated upwards to maneuver it behind the bumper fascia. The Curt receiver simply attaches to the inside of each frame rail. The install times mentioned all three hitches are identical. If I had to choose, I would...
    view full answer...

  • Recommended Trailer Battery Charging System for Enclosed Motorcycle Trailer for Tools and Mattress
  • You can absolutely use a battery in your trailer to do all the things you desire. You will simply want to get a deep cycle battery and get the amp hour rating you desire. The CTEK D250S Dual Battery Charger 12V- 20a, 5 step, Heavy Duty# CTEK40186 along with the CTEK SmartPass Energy Management Unit for CTEK D250S DUAL Battery Charger # CTEK56676 are a great combination for that as the D250S alone will not work well on the high-capacity deep cell batteries. Instead I recommend...
    view full answer...

  • No Signals on Wiring Harness 56042 in Highlander with Tow Prep Package
  • Exactly what is included in a "tow package" can vary considerably. The actual parts included will be different among different vehicle brands, models and production years. You were smart to check for a missing fuse in your Highlander. I suggest another look in case there are additional fuses that are missing. If you have a circuit tester like # ALL640595 it will be easy to test the vehicle's wiring, where the Curt harness plugs in, to see if the signals are present on the vehicle's...
    view full answer...

  • Engine Block Heater and Installation Location for a 2010 Toyota RAV4 with 3.5 Liter Motor
  • I checked with Kat's Heaters and cartridge heater # KH11813 is the correct model for your 2010 Toyota RAV4 with the 6 cylinder motor. It installs at the back left of the engine (left meaning the driver's side). The general instructions are: 1) Locate cartridge hole on the engine block. 2) Clean cartridge hole of all debris. Use compressed air. 3) Attach cord to heater. 4) Install heater into the hole. Rotate the clip on the cord to the proper position to secure the heater and...
    view full answer...

  • Conical Tooth Washer Placement for Trailer Hitch Installation on a 2010 Toyota Yaris
  • The washers that are included with trailer hitch # 24819, are conical tooth washers similar to # 01292-008. You are correct, they are sort of bowl shaped. The tooth end goes towards the hitch. I have included a link to the installation instructions for the hitch. Using a thread locker like Loc-Tite, # LT37643, can be done but it is not necessary. The conical tooth washer prevents the bolt from backing out.
    view full answer...

  • Recommended Timbren Rear Suspension Enhancement for a 2010 Toyota Tacoma With 4WD
  • There are a few different options that we have for you to install a Timbren Rear Suspension Enhancement System on your 2010 Toyota Tacoma that is 4WD. Please keep in mind that any suspension enhancement system will not increase your weight capacity. It is meant to supplement a suspension system that is in good working order. You should never exceed the weight-carrying capacity of your vehicle. If you plan on driving places that might not have a road then I recommend going with the Timbren...
    view full answer...

  • Best Motorcycle Transport System for Harley Davidson Motorcycles and Trailers
  • The B&W Biker Bar Motorcycle Tie-Down System is a great product for any biker who needs to transport their bike for any reason. The bar quickly and easily connects to the frame of the bike and mounts securely into the tray that is mounted to the floor. There are no further tie downs or anything else needed. I've attached some videos to assist. Harley-Davidson Softail, Dyna, V-Rod # BWMC2302 Harley-Davidson Touring models like the Road Glide, Electra Glide, Street Glide # BWMC2301 Harley-Davidson...
    view full answer...





^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.