fall hauling headquarters

Replacement Mirrors

Change Make

Select Vehicle Model

  
Replacement Mirrors

Available Models for 2010 Jeep Replacement Mirrors



What our customers are saying:

Excellent service and communication. Expect part to be excellent too!

Tommy

Tifton, GA



Accessories



2010 Jeep Questions and Answers


  • Availability of a Replacement Trailer Wheel with 4 on 4 Bolt Patten for a 13 Inch Tire
  • I believe I can help you. The rim size you have does not seem odd. We have numerous rims with the 4 on 4 bolt pattern for 13 inch tires. The center hole or pilot diameter is smaller than the ones on the wheels we carry. The only reason this would be a factor is if the wheels center on the hub using the pilot hole OR if the axle diameter is larger than the pilot hole. If the wheel is centered on the hub using the lug nuts, then having a larger pilot diameter is not a problem. In order...
    view full answer...

  • How To Wire A Towed Vehicle When Both Vehicles Have Separate Stop And Turn Signals
  • The Tow Ready Vehicle To Vehicle Taillight Converter, # 118158, you have referenced will not be needed since you will be staying with a 3-wire system (separate stop and tail lights)on both of your vehicles. The converter is only needed if you had a 2-wire system (combined stop and tail lights) on the towing vehicle and a 3-wire system on the vehicle being towed. I would recommend using a diode system to wire your vehicle because the diodes will prevent feedback from going from the taillights...
    view full answer...

  • Components Required to Flat Tow a 2010 Jeep Liberty Behind a Motorhome
  • Flat towing a vehicle behind a motor home requires a number of components: base plates, tow bar, safety cables, tow bar wiring/lighting and a supplemental braking system. The linked article covers each of these items in detail. Your first step is to check your Liberty owners manual (or with your local dealership) for any requirements or restrictions related to flat towing. Some vehicles may require modifications in order to be flat-towed. You will also want to check your motor home...
    view full answer...

  • Recommended Hitch For Jeep Grand Cherokee SRT-8 For 2006 Through 2012
  • In 2011, changes were made to the Jeep Grand Cherokee SRT-8 frame and we do have hitches for both 2011 and 2012 that are Class lll hitches. I recommend the Draw-Tite, part # 75699. This is a Class lll hitch and has a 2 inch receiver opening. I have attached an installation video for this hitch on a 2012 Grand Cherokee you can check out. Unfortunately, the only hitch we have available that is designed to work with a 2007 through 2010 Jeep Grand Cherokee SRT8 is a Class l hitch, part...
    view full answer...

  • How to Charge a Camper Trailer's Battery While Being Towed
  • To put a maintenance charge on your trailer's battery you are going to need to have a 7-way installed on both the 2010 Wrangler and your trailer. The 12 volt circuit of 7-way can put a maintenance charge on a trailer's battery if the circuit is ran to the positive post of the battery. In your situation this is the most common way people charge the battery. You should note that this method will only put a maintenance charge on the battery and would not charge a depleted battery. It sounds...
    view full answer...

  • Brake Controller Wiring on 2010 Jeep Grand Cherokee
  • The 2010 Jeep Grand Cherokee is not pre-wired with a brake controller port for installation of a brake controller. To install a brake controller on your 2010 Jeep Grand Cherokee with a factory 7-Way you will need to do a little hard wiring. The only wire Jeep provides is the electric brake output wire that goes back to the 7-Way trailer connector. This wire is probably a light green wire that is behind the in cab fuse box. It will connect to the blue wire on the brake controller. You...
    view full answer...

  • Can the Rola Roof Mounted Cargo Basket, # 59504, be Locked Into Place
  • The Rola Roof Mounted Cargo Basket, # 59504, does not have a locking mechanism built in. You could run a cable lock, like the Quantum 15 Steel Cable Lock, # 8157DPS, through it and your cross bars to deter theft. I have included a video review of this lock below.
    view full answer...

  • Do Bestop Trektop Bow Brackets Need To Be Removed to Install Hard Top on 2010 Jeep Wrangler JK
  • I spoke with my Bestop Representative, who tells me that the brackets that attach the bows to the roll bar can indeed remain in place when you install the hard top.
    view full answer...

  • Will Curt Class III Trailer Hitch Receiver, # 13245 Fit a 2010 Jeep Liberty Limited Sport 4x4
  • I spoke with my contact at Curt. He stated that the Curt Class III Round Tube Trailer Hitch Receiver, # 13245, will fit your 2010 Jeep Liberty Limited Sport 4x4. I have included a link to the installation details below. If you plan on doing some towing, the recommended ball mount is # 2923 and you can use hitch ball # 19260 (1-7/8 inch diameter), # 63845 (2 inch diameter), or # 63847 (2-5/16 inch diameter). For trailer wiring, you would need T-One Vehicle Wiring Harness with 4-Pole Trailer...
    view full answer...

  • Installing the Tekonsha T-One # 118384 on a 2010 Jeep Liberty
  • If you check out the linked installation video of the Tekonsha T-One # 118384 being installed on a 2012 Jeep Grand Cherokee you can see where the plug is located. If the directions for your wiring harness say that the connector should be located on the driver side of the bumper then this is where it should be for your 2010 Jeep Liberty. Please note that not all 2010 Liberties have the US car connector. If that is the case for your Liberty then you will need to install the T-One # 118554...
    view full answer...

  • Recommended Wiring for 2010 Jeep Liberty to Tow a Trailer with Electric Brakes
  • For your 2010 Jeep Liberty, I recommend you start with the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118554. This will connect to your factory wiring behind your tail lights. Then because you are wanting to run a trailer with brakes, I recommend you install the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires # ETBC7. This kit will give you the wiring, connectors, and circuit breakers needed for an electric...
    view full answer...

  • Hitch Compatibility with Spare Tire on 2010 Jeep Patriot
  • All trailer hitches offered for your 2010 Jeep Patriot, shown on the linked page, will install without need to remove your spare tire from under the vehicle. All are also no-drill installations that include all the required mounting hardware. I confirmed with Curt that their hitch # C12255 installs on your vehicle without need to remove the spare.
    view full answer...

  • Blue Ox Patriot Braking System Give A04 Error and Stays Fully Extended
  • I am assuming that you received the same error code on the replacement Patriot braking system which would indicate another software error. The question is, why does this keep happening, since it is unlikely that 2 different Patriot systems would have the exact same problem. It sounds like what might be happening is the Liberty battery is losing voltage over time while you are towing and that is affecting the Patriot system, which is supposed to go into a battery saving mode when it detects...
    view full answer...

  • Determining if a Trailer Hitch Mount Cargo Carrier Will Clear the Spare Tire, 2010 Jeep Wrangler
  • With any cargo carrier or accessory, I do not recommend using an extension because it will reduce the tongue weight capacity of the trailer hitch by 50 percent. Instead, I would go with the carrier that offers the most amount of clearance to help clear the spare tire as much as possible. The carrier that extends the furthest is the Surco Carrier, # 52018F. When the carrier is down it measures 17-3/4 inches from the center of the hitch pin hole. This carrier folds up but it is unlikely...
    view full answer...

  • Can Multiple RV Heater Pads with Thermostat 277-000163 Be Wired Together
  • My contact at Patrick Industries advised that their RV Heater Pad with Thermostat # 277-000163 could be parallel wired in up to 3 pads total provided that the DC power source has enough current for the 5.8-amp draw from each pad. Typically a 15-amp circuit can handle three since they cycle on and off. These pads are suitable for your 45-gallon grey and black water tanks; one per tank is enough according to my contact. For your 70-gallon fresh water tank you'll want to use two and position...
    view full answer...

  • Brake Controller Installation- 2010 Jeep Liberty w/ Factory 7-Way Trailer Connector
  • The 2010 Liberty wont have a connector under the dash for a brake controller. With the factory 7-way, Jeep ran the brake controller output circuit from the 7-way connector, and routed it under the vehicle into the passenger compartment. It terminates under the dash near the emergency brake pedal or behind the kick panel to the left of the emergency brake pedal. The wire is light blue or light green in color, and could have a white tag on it that says 'Brake Output'. This wire connects...
    view full answer...

  • Will RoadMaster Falcon 2 Tow Bar # RM-525 or # RM-520 Fit on 2010 Jeep Wrangler
  • Yes, we have a version of the RoadMaster Falcon 2 Tow Bar, # RM-520, that will work with your Currie Tow Bar Mounting Plate, as long as it will accept Blue Ox base plate brackets. The RoadMaster Falcon 2 Tow Bar for Blue Ox Base Plates, # RM-525, is designed to work with base plates that accept the Blue Ox hookup brackets and should work with your mounting plate.
    view full answer...

  • Is Bumper Fascia Cutting Required for Installation of the Curt Hitch #13251On a Jeep Grand Cherokee
  • If you are installing the Curt Class III Trailer Hitch, item # 13251, on a 2005 to 2010 Jeep Grand Cherokee (except SRT8), there will be no cutting of the fascia required to install the hitch. If your vehicle has any aftermarket parts, then that will need to be determined at the time of installation. Some items you may need with the Class III hitch are listed below. Drawbar # 2923 Hitch Ball # 19260 or # 19247 Hitch Lock Kit # 7685
    view full answer...

  • What Roadmaster EZ4 Base Plate Kit Will Fit A 2010 Jeep Wrangler
  • The Roadmaster EZ4 Base Plate Kit, # RM-521448-4, will fit a 2010 Jeep Wrangler without aftermarket bumpers, winch, or guards. There is some trimming needed on the factory rock guard underneath the front bumper. The Roadmaster EZ4 Base Plate Kit, # RM-521448-4, is for the 2007 to 2009 Jeep Wrangler and Wrangler Unlimited. It will not fit the 2010 Jeep Wrangler. The Roadmaster EZ4 series base plates are our most popular base plates. They will fit all the Roadmaster tow bars and they...
    view full answer...

  • How To Choose the Correct Weight Distribution System for a 5000 lb Trailer Towed by a 2010 Liberty
  • The key to choosing the correct weight distribution system is knowing the tongue weight of your trailer when it is fully loaded and ready to tow. Keep in mind that anything loaded behind the rear axle of your 2010 Jeep Liberty will contribute to the tongue weight as well. I would recommend choosing a system that has a tongue weight capacity range that encompasses the tongue weight of your trailer with its heaviest load. We know that the tongue weight of your trailer must stay under...
    view full answer...

  • Is Bestop Jeep Cover Waterproof and is Additional Hardware Needed to Install
  • I spoke with the folks at Bestop, who tell me that if installed correctly, the All Weather Trail Cover you mentioned, part # B8104109 will protect the interior of the vehicle from ordinary weather conditions. Extended exposure to heavy rain or snow can cause some seam leakage. They went on to tell me that this can be stopped by spraying the inside of the seams with Scotchguard. They also recommend that any water that pools on top of the cover be removed as soon as possible. The cover...
    view full answer...

  • Towing Mirror Recommendation for a 2013 Jeep Wrangler Unlimited
  • For a 2010 Jeep Wrangler Unlimited you will need to use a universal towing mirror or mirror set since there are no custom towing mirrors available. I have included a link to the towing mirror options we carry for you. Given the rugged nature of the Jeep pedigree I recommend a door mount mirror, # 11650, to fit on the door of the Jeep. I have included a link to a video review of this mirror for you. This mirror extends out 17 inches and should significantly increase visibility behind...
    view full answer...

  • Differences Between Optronics # STL69RRXB and # STL69RB LED Stop/Turn/Tail Lights
  • The only difference between the two is the height of the lamp. The Optronics # STL69RRXB is 15 inches long by 1-5/8 inches tall, while the # STL69RB is 15 inches long by 1-3/8 inches tall, a 1/4 inch difference. Other than that, both lamps are pretty much identical.
    view full answer...

  • Recommendation for an Oil Filter Sandwich Apater for a 2011 Jeep Wrangler with 3.8 Liter Engine
  • I spoke with my contact at Derale and he stated that there are 2 options for an oil filter sandwich adapter for your 2011 Jeep Wrangler with a 3.8 liter. First, you can use Derale Thermostatic Sandwich Adapter Kit, # D15730. This is a Thermostatic type of adapter that allows oil cooler than 180 degrees to bypass the heat exchanger. The other options is Derale Non-Thermostatic Sandwich Adapter Kit, # D15735. This kit actually comes with several size fittings to fit different engines....
    view full answer...

  • Do I Need a Base Plate Kit to Attach Blue Ox Tow Bar to 2010 Jeep Wrangler
  • Yes, to attach your Blue Ox Tow Bar to your 2010 Jeep Wrangler, you will need to use a base plate kit. The tow bar you have, the Adventurer, part # BX7322, will work with the Blue Ox Base Plate Kit # BX1126, according to Blue Ox. The Blue Ox Base Plate kit will not fit aftermarket bumpers, or bumpers with winches or guards. In addition to a base plate kit and tow bar, you will need safety chains, lighting or wiring, and a supplemental braking kit to flat-tow your Jeep Wrangler. The...
    view full answer...

  • How to Determine if a Curt Wiring Harness # C56333 is Damaged
  • The best way to determine if the converter box is bad on something like a Curt Custom Fit Wiring # C56333 would be to check for voltage going into the box on the left turn signal to make sure that voltage is going into the box and then to check it on the outside of the box to see if the voltage makes it through the box. If there is voltage on the in (vehicle) side of the box but none on the out (trailer) side of the box then you know that the problem is inside the box and it should be...
    view full answer...

  • Brake Controller and Adapter Harness for 2010 Jeep Wrangler Unlimited
  • The Tekonsha Prodigy P2 Brake Controller # 90885 is an excellent choice; this is among the most reliable and popular units we offer. Since your 2010 Jeep Wrangler Unlimited does not have a quick-connect brake controller port under the dash your application will be a hard-wired installation. The P2 comes with a 4-wire pigtail wiring harness. You will connect the 4 wires as follows: white connects to the battery ground terminal; the black wire connects to the battery positive terminal...
    view full answer...

  • Recommended Wiring Harness For 2010 Jeep Commander Without Factory Tow Package
  • For your 2010 Jeep Commander, since you don't have a factory tow package you will need a wiring system that does connect behind your vehicle tail lights. I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118408. Using a wiring harness designed for use with the factory tow package like # 118381 will not work by adding fuses. If your Commander is like the Grand Cherokee in that all the wiring connects, then you can take it to the dealer and have...
    view full answer...

  • Flat Towing 2010 Jeep Wrangler Sahara
  • First, you will want to make sure that your 2010 Jeep Wrangler will not exceed your towing vehicle's maximum towing capacity. Generally, when flat towing, you want your tow vehicle to weigh twice as much as the vehicle being towed. You will also want to check your owner's manual for instructions on recreational towing for your vehicle. If you find it is safe to tow your Wrangler behind your car, then you will need a base plate kit, tow bar, braking system, tow light wiring, and wiring...
    view full answer...

  • Will Hollywood Bike Carrier part # HR 1400 Clear the Spare Tire on a 2010 Jeep Wrangler Unlimited
  • In order to conclude whether or not the Hollywood Bike Carrier part # HR1400 will clear your spare tire on your 2010 Jeep Wrangler some measurements need to be taken. You will need a straight edge such as a yardstick or a dowel rod and a measuring tape. Hold the dowel rod or yardstick vertically against the back of your spare tire, making sure that the end of the straight edge extends lower than your hitch pin hole. Use the tape measure to find the distance from the center of the...
    view full answer...





^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.