Menu Icon
fall hauling headquarters

Replacement Mirrors

Change Make

Select Vehicle Model

  
Replacement Mirrors

Available Models for 2010 Infiniti Replacement Mirrors



What our customers are saying:

Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast.

John

Mankato, MN



Accessories



2010 Infiniti Questions and Answers


  • Which is the Smallest Roof Mounted Cargo Box that will Fit 2010 Infinit EX35 with Factory Crossbars
  • We have an option that will work for you, however, Yakima does not list any of their cargo boxes as a fit for your 2010 Infiniti EX35 factory roof rack. Yakima does not have any options, however, Thule offers quite a few, the smallest being the Sidekick, part # TH682 and the Force, part # TH624. The Sidekick measures 54 inches long and the Force measures 65 inches long. According to Thule, these cargo boxes will fit on your factory crossbars so drilling new holes will not be necessary....
    view full answer...

  • How Visible is the Curt Class III Hitch # 13354 when installed on a 2010 Infiniti FX35
  • My technical contact at Curt Mfg. was kind enough to send me a photo of the Curt Class III Round Tube Receiver Hitch, # 13554, on an Infiniti FX35. I attached this photo for you to see. The hitch in the photo is blue because it is the engineering mockup for the hitch, but it does show the final position of the hitch when correctly installed. The hitch in black will blend much better with the vehicle underbody. None of the hitches we carry for the 2010 Infiniti FX35 will be completely...
    view full answer...

  • Is there a Hitch for a 2010 Infiniti FX35 That Mounts Above the Exhaust
  • All of the trailer hitches offered for your 2010 Infiniti FX35 will install below the exhaust and in pretty much the same way since all will use the same attachment points on the vehicle's frame. There is no hitch available for your car that has a cross tube that sits above the exhaust. The linked page will show you all hitches offered for your FX35 and the linked photo shows you the rear of a 2010 FX35 with Curt hitch # 13554 installed. Each hitch fits both all-wheel-drive and rear-wheel-drive...
    view full answer...

  • Hitch-Mount Cargo Carrier Recommendation for 2-Inch Hitch on Infiniti QX56 (QX80)
  • The Infiniti QX56 underwent a re-naming process with the 2014 model year at which time it became known as the QX80, however cargo carrier fits for the two versions are the same since only 2-inch Class III hitches are offered for the vehicle. The 2-inch Class III hitches for your QX56 share a substantial 600-lb tongue weight capacity. This means that you can use a high-capacity cargo carrier and use every bit of its capacity for your luggage. Even if you don't need a 500-lb-rated basket...
    view full answer...

  • Trunk Mounted Bike Rack Recommendations for 2010 Infiniti G37 Coupe
  • Thule states that three of their racks, the Archway part # TH9009XT, the Gateway part # TH9006XT and the Passage part # TH910XT will work well with your vehicle. The Gateway would be a good choice, it features padded anti-sway cradles that will keep your bikes safe and secure. For womens bikes or bikes with sharply angled top tubes or step-through frames, using a frame adapter like part # TH982XT is recommended. The adapter spans the distance between the seat post and the handle bar...
    view full answer...

  • Installation of DrawTite # 75778 Class III Trailer Hitch on 2010 Infiniti FX35
  • To install the Draw-Tite Class III receiver hitch part # 75657 on your Infiniti, the splash guards, under body appearance panels and tow hook will need to be removed. Once the installation is completed, the splash guards will be replaced, but the tow hook and the under body panels will not be re installed as they would interfere with the hitch. If you choose to install the hitch, we recommend keeping these removed items in the event you should decide to remove the hitch in the future. For...
    view full answer...

  • Is Fascia Trimming Required on 2010 Infiniti G37 Coupe to Install Curt Trailer Hitch
  • There is some trimming required on the 2010 Infiniti G37 coupe to install Curt trailer hitch # C11493. There is an area approximately 1-3/4 inches by 2 inches that will need to be trimmed off the bumper fascia. I have included a picture that shows the hitch installed on a vehicle and the area that gets trimmed. If you plan on doing some towing first check the vehicle owners manual for its capacities. The recommended ball mount is # C45521 and use # F-4 for the pin and cip. For a 1-7/8...
    view full answer...

  • 2010 Infiniti G37 Trailer Hitch Receiver Comparison
  • The Curt trailer hitch receiver # C11499 is very similar to the Draw-Tite # 24831. The Curt hitch is made in the USA and the Draw-Tite hitch is made in Mexico. These hitches will install in a similar manner and will require trimming of the fascia. The Curt hitch will include the pin and clip, but will also require stabilization strap # 18050 for any non-trailer accessory. This isn't a bad idea, but many people don't like that requirement for their warranty to remain intact. Both...
    view full answer...

  • Recommend a Trailer Hitch to Carry Bike Rack For 2010 Infiniti G37 Convertible
  • We do have a trailer hitch available that will fit your 2010 Infiniti G37 Convertible, you will need the CURT Trailer Hitch, part # C11068. The CURT # C11068 is a Class I 1-1/4 inch hitch, you will need to make sure your bike rack is compatible with Class I hitches. Installation of the CURT # C11068 requires drilling, and minor trimming of the rear bumper fascia. The estimated installation time is approximately 3 hours. I have linked instructions for you to view. The instructions include...
    view full answer...

  • Availability of Roof Cargo Bag For a 2010 Infiniti QX56
  • Anytime you are going to haul cargo on the roof of your 2010 Infiniti QX56 ( I do not list a Q54 model) you will want to check the owners manual or with the Infiniti dealer for what the roof capacity is for your vehicle. The roof capacity will let you know how many pounds you will be able to haul on the roof of your vehicle. The Thule Interstate Roof Rack Cargo Bag, part # TH869 is designed to work on your factory roof rack if you have crossbars that run from side-to-side. If you have...
    view full answer...

  • Will the Thule Passage 3 Trunk Mount Bike Rack Fit a 2010 Infiniti FX35
  • The Thule Passage 3 trunk mount bike rack # TH911XT is listed as a fit for your 2010 Infiniti FX35. I have included a link to a video review of this rack for you. If you will be carrying any bikes that do not have a top frame tube that goes straight across (like a typical mens bike) I recommend using adapter bar # TH982XT. This will allow you to carry those bikes more level. I use adapters similar to this and without them my wifes bike would be at a severe angle and I would not be able...
    view full answer...

  • Receiver Location for a CURT Trailer Hitch on a 2010 Infiniti G37
  • I have included a link to the installation instructions for the CURT Trailer Hitch, # 11499, for your 2010 Infiniti G37. The hitch touching the vehicle is not really an issue because you will actually have to trim some of the rear fascia to allow the hitch to fit as noted in the instructions. The warning you are referring to for non-trailer loads is only on certain CURT hitches. More specifically, it is referring to all CURT Class I, Class II, and some Class III trailer hitches. This...
    view full answer...

  • How Much Weight Can a 2010 Infiniti G37 Carry on the Draw-Tite Hitch # 24831
  • You are correct in that the Draw-Tite Class I Trailer Hitch Receiver, # 24831, for the 2010 Infiniti G37 will have a max limit of 200 lbs of weight that you can carry on a cargo carrier. When looking at a cargo carrier you will need to factor in the weight of the carrier as well as the cargo when mounted in the Draw-Tite hitch. A cargo carrier like the Curt Cargo Carrier, # C18145, will fit the Draw-Tite hitch and has a weight of 29 lbs. So with this carrier you would be able to carry...
    view full answer...

  • Is Thule Passage Trunk Rack Good Fit for 2010 Infiniti G37
  • The Thule Passage part # TH910XT is a confirmed fit for your 2010 Infiniti G37 whether it is a sedan or a coupe. This is a great trunk rack at a great price that would work very well for you. To preventing scratching you need to make sure the painted surface of your vehicle is clean as well as the mounting pads of the rack. To prevent denting you need to be sure not to exceed the weight capacity of the rack and follow all install steps. If you plan on carrying any womens or alternative...
    view full answer...

  • Availability of Trunk Mount Bike Rack For 2010 Infiniti FX35
  • I do have a trunk bike rack that will fit your 2010 Infiniti FX35, but it will not be the Yakima KingJoe 3 Bike Rack, part # Y02620. Yakima does not have a trunk bike rack to fit the Infiniti FX35 because the side strap hooks on the bike rack cannot be securely attached. I would recommend the Thule Raceway 3 Bike rack, part # TH9002PRO, for your FX35. The Raceway is the easiest to install and remove bike rack I have ever seen. It uses retractable cables instead of straps to secure the...
    view full answer...

  • Will the Thule Hyper Cargo Box fit the Factory Roof Rack on a 2010 Infiniti QX56
  • The Thule Hyper Cargo Box, # TH612, does fit the factory roof rack on a 2010 Infiniti QX56. However, with the box installed there will be rear hatch interference. You will not be able to fully open the rear hatch without making contact with the box. I recommend a box that is a little shorter, the Pulse L, # TH615, which is 76 inches long, 14 inches shorter than the Hyper. You will not need any additional accessories to attach any of the above boxes to the vehicle.
    view full answer...

  • Lock Recommendation for the Swagman Trailhead Bike Rack
  • The Swagman Trailhead 3 Bike Rack # S63365 does have an anti-rattle device that can work when used in a 2 inch or 1-1/4 inch trailer hitch. When used in a Class I hitch like the # 24831 I can't recommend you ever use more than 2 bikes. Doing so would void the warranty. This is a great rack at a great price so I would recommend it for you. For a lock for this bike rack you would just need the part # S64029 as well.
    view full answer...

  • Brake Controller and Transmission Cooler for a 2010 Infiniti QX56
  • I will be happy to help. Starting with a brake controller we have many options but one controller stands out as my personal favorite, the P2, # 90885. This is our best selling controller of all time because it is easy to set up and use and it is reliable. Installing it depends on how your 2010 Infiniti QX56 is set up. If your QX56 came with a factory installed 7-Way trailer connector at the back you can use wiring harness # 3050-P with the brake controller. If it does not have a trailer...
    view full answer...

  • Will the Thule Force XXL Cargo Box Fit on a 2010 Infiniti QX56 with Factory Crossbars
  • Thule has determined that the Force XXL Cargo Box, # TH626, will fit on the factory crossbars on your 2010 Infiniti QX56. I did some research on your vehicle and found that the roof weight capacity is 200 lbs, however, this cargo box has a weight capacity of 110 lbs. You should not exceed the weight capacity of the cargo box. If the crossbars on your vehicle are adjustable, then I would recommend mounting this cargo box with the widest spread possible. This will provide more stability...
    view full answer...

  • Can the Rola Enclosed Cargo Carrier be Painted to Match a Vehicle Color
  • Paint would not stick well to the Rola enclosed cargo carrier. But if you can find the right kind of paint for the material (plastics) then you can certainly try. It may not last all that long and you will find yourself painting it again or touching it up.
    view full answer...

  • Anti-Rattle Device for Use with Hitch Adapter
  • Any hitch adapter/extender product such as 2-inch-to-1-1/4-inch adapters # HTAD and # HT5R can introduce the potential for some rattle. But we do offer anti-rattle devices that can take most of the slack out of such systems to reduce rattle and noise. In your 1-1/4-inch hitch (or in a 2-inch) you can use Boone part # 93347 which is shown in the linked video. Do note that any hitch adapter will reduce the hitch's rated capacity by 50-percent.
    view full answer...

  • Bike Rack Recommendation for 2010 Infiniti G37 Convertible
  • The only bike rack solutions we have for a 2010 Infiniti G37 convertible is going to be a hitch solution as there are no trunk racks that will fit. So you'd need the Curt hitch part # C11068 which is a confirmed fit and then a recumbent bike rack like the Hollywood Racks Sport Rider 2-Bike Carrier for Recumbents # HR1000R which is designed for the alternative frame styles and longer wheelbases of recumbents like your Bacchetta Corsa. Curt requires the use of their stabilizer strap part...
    view full answer...

  • Is the SportRack Groomer Deluxe # SR6466 Compatible with a 2010 Infiniti G37 4-Door
  • You most certainly can use the SportRack Groomer Deluxe Ski and Snowboard Carrier # SR6466 with your 2010 Infiniti G37, but you will first need to make sure that you have a roof rack. If you do already have one, this carrier is compatible with round, square, and most factory crossbars with a max width of 3-3/4". If you don't already have a roof rack system then you would want to install a system like the Rhino-Rack Square Bar Roof Rack which includes the Crossbars # RREB118B, 2500 Series...
    view full answer...

  • Bike Rack Recommendation for 2010 Infinity G37 Convertible
  • The only solution we have to carry a bike rack with your 2010 Infiniti G37 convertible is with a hitch since no trunk racks fit the convertibles. That means for a hitch you'd need the pat # C11068 which is confirmed as a fit. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Thule Roadway 2 part # TH912XTR. We asked our demo and install guys to name their favorite, most easy-to-use bike racks and this one showed up in nearly everyone's top three....
    view full answer...

  • Trunk Mounted Bike Rack for a 2010 Infiniti FX35 with Alternative Frame Bikes
  • The Thule Passage 2, part # TH910XT is a compatible fit with the 2010 Infiniti FX35. While the Passage is installed, it's not recommended to open the rear hatch as this can cause the straps to loosen or shift, and create an unsafe situation. Initially, the Passage doesn't have any security features equipped on it. You can add a security strap for the rack with part # TH533 and a cable lock like part # CAB-10 for security. The Thule Archway XT, part # TH9009XT is a great choice...
    view full answer...

  • Brake Controller Stopped Working with Brake Pedal on a 2010 Infiniti QX56
  • When there is no power to the red wire on a brake controller that plugs into a vehicle then the likely culprit is a blown stop light or CHMSL (center high mount stop light) fuse. If the brake controller is hardwired to the vehicle then check the wire to which the red brake controller wire is connected. If that wire has power but the brake controller red wire does not then you will need to make a new connection. If the wire does NOT have power then it goes back to a blown stop light or...
    view full answer...





^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.