fall hauling headquarters

Replacement Mirrors

Change Make

Select Vehicle Model

  
Replacement Mirrors

Available Models for 2010 Buick Replacement Mirrors



What our customers are saying:

WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!

Eric

Cedar Springs, MI



Accessories



2010 Buick Questions and Answers


  • Comparing Adco 5th Wheel Trailer Storage Covers 290-34856 and 290-52256
  • The main difference between the Adco 5th Wheel Trailer Covers # 290-34856 and # 290-52256 is that each is intended for a slightly different type of climate. Cover # 290-34856 is intended as an all-climate cover that is made to withstand wind, high sun exposure, high moisture and snow. AquaShed Cover # 290-52256 is intended specifically for wetter and warmer (moderate) climates where protection from moisture is a primary concern. So for example, if you live in the high desert then...
    view full answer...

  • Backup Camera Recommendation for a 2010 Buick Lacrosse
  • Yes, you can install a backup camera on your 2010 Buick Lacrosse. The backup camera system that I recommend is the Hopkins Smart Hitch Backup Camera, # HM50002. This is an excellent camera system that will not have any interference issues like the wireless systems. It has a color display with distance indicators. I have attached an installation video to give you an idea of how this camera system installs.
    view full answer...

  • Can Fascia Door Be Reinstalled after Draw-Tite Hitch 75528 is Installed on 2010 Buick Enclave
  • Once installed, the front face of the receiver will extend a bit too far rearward in order for the fascia door to be reinstalled. From what I have been able to determine in my research, the other fascia door you mentioned (with the hump in it) can be obtained from your Buick dealer, but it is intended to work with the OEM hitch because the aftermarket hitch receiver tubes extend a bit further rearward. So, you can install an aftermarket hitch and leave off the fascia door, or purchase...
    view full answer...

  • Thule 5 Bike Vertex Bike Rack Recommendation for Carrying 3 Adult and 2 Children Bikes
  • The Thule Vertex 5 Bike Rack # TH9030XT that you referenced would make an excellent choice for you to carry your 5 bikes. This rack has arcing arms that allow for faster and easier loading, more space between the bikes and puts them at different heights allowing the pedals and handlebars to be at different heights which will reduce contact between the bikes. I attached a review video for this product for you to check out. For childrens bikes we recommend you use a Thule Bike Adapter...
    view full answer...

  • 7 to 4-Way Adapter for 2010 Buick Enclave w/ Factory Tow Package
  • If your Enclave has the 7-Way connector that has the factory harness that plugs into the rear of it, the 4-Pole Trailer Adapter for GM trucks with Factory 7 Way, part # 118384 will work great for you. Another option would be to use an adapter that would plug into the front of the 7-way, like the 7 to 4-Way Adapter with Tester, part # 47345.
    view full answer...

  • Are Handle Nuts Included When Ordering Replacement Hardware Kit # RHK For 2010 Buick Enclave Hitch
  • The picture for the Replacement Hardware Kit, part # RHK, is a typical photo. This means the picture is not the exact parts you will get with the kit you will need, it is just a photo of typical hitch mounting hardware. When you order your # RHK hardware kit, you will need to put in the part number of your hitch and the manufacturer of your hitch. With that information we will send you the same hardware that you would have received when you would have initially purchased that particular...
    view full answer...

  • How to Remove Let's Go Aero # 63232 Hitch Lock When Keys are Missing
  • If you know the reference number that was printed on the key, we might be able to obtain a replacement key. If you don't know the key number, you best bet would be to drill the lock cylinder out, or use a cut-off wheel on an angle grinder to cut the lock off flush with the side of the receiver tube. If you don't feel comfortable doing this, your mechanic or locksmith should be able to do it with no problem.
    view full answer...

  • Will Curt Aluminum Trailer Hitch Mount Cargo Carrier Fit when Folded Up on a 2010 Buick Enclave
  • The Curt trailer hitch mount cargo carrier, # C18100, will fit in a 2 inch receiver. It measures 4-1/2 inches from the center of the hitch pin hole to the closest edge of the carrier when folded up. To determine fit, first make sure you have a 2 inch receiver opening. Then measure from the center of the hitch pin hole straight back to the distance required to clear the rear of the vehicle. If the measurement is less then 5 inches, the carrier will fit when folded. On hitches that we...
    view full answer...

  • Parts Needed to Flat Tow a 2010 Buick Enclave with a Motorhome with Air Brakes
  • For your 2010 Buick Enclave I recommend using the Roadmaster EZ Crossbar Style Base Plate Kit # 523149-1 along with the Roadmaster Falcon 2 # RM-520 and the 6,000 lb coiled safety cables # RM-643. For a complete flat towing setup you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter. I like recommending the Flexo-Coil Wiring Kit # RM-15267 because it allows you to also installed the Charge Line...
    view full answer...

  • How Much Heat Shield Trimming is Require to Install Hitch C12115 on a 2010 Buick LaCrosse
  • For the Curt Class II Trailer Hitch Receiver, # C12115, there is no heat shield trimming. But you will need to trim a small section of the fascia on each side of the vehicle. Take a look at the instructions linked to the right for more details.
    view full answer...

  • Will The CIPA Universal Strap-On Towing Mirror # 7070 Fit My 2010 Buick Enclave
  • The CIPA Universal Strap-On Towing Mirror # 7070, is a universal fit item and will fit most OEM mirrors. The # 7070 mirror will fit onto the mirrors on your 2010 Buick Enclave as long as there is a lip around the glass edge for the hook to attach to. Part # 7070 is sold in a quantity of 1 mirror. I have linked a video review of the CIPA Universal Strap-On Towing Mirror, part # 7070 for your refernece.
    view full answer...

  • Dimensions for Draw-Tite Max-Frame Trailer Hitch # 75528
  • I went out to our warehouse to take a couple measurements on the Draw-Tite Max-Frame Trailer Hitch Receiver # 75528 that you referenced. I measured a distance between the bolt holes on the left and right side brackets to be right at 43-1/4 inches, on center. The distance between the two bolt holes on the bracket is 2-1/4 inches, on center. I have attached an image with these dimensions labeled that you can also check out. This Class III hitch is confirmed to fit the following vehicles: 2007...
    view full answer...

  • Trailer Hitch and Transmission Cooler for a 2010 Buick Enclave
  • You will want to be extra careful because just adding a transmission cooler and higher capacity trailer hitch will likely not get your Buick Enclave to the 4500 pound capacity. That much discrepancy in the tow package capacities suggests to me a difference in the drivetrain (motor, transmission) and/or the suspension as well as the rear axle. I can certainly help you out with adding a cooler and higher capacity hitch but you will want to check with a Buick dealer or GM technician to determine...
    view full answer...

  • Measurements of WeatherTech Front Floor Mats # WT452681 for 2010 Buick LaCrosse
  • I contacted the team at Weather Tech to obtain the actual dimensions of the tan front floor liners for your 2010 Buick LaCrosse, part # WT452681. Driver-side liner measures 22.10 inches wide x 25.39 inches long at the widest and longest points. Passenger-side liner measures 22.08 inches wide x 25.39 inches long at the widest and longest points. Since the mats are molded to precisely follow the interior contours of your LaCrosse, the measured dimensions will vary slightly depending...
    view full answer...

  • Will the Thule Passage Trunk Mount Bike Rack Fit a 2010 Buick Enclave and 2012 Chevy Impala
  • The Thule Passage trunk mount bike rack will fit both your 2010 Buick Enclave and 2012 Chevy Impala. I have included a link to a video review of the rack for you. You might not have to use an adapter bar, # TH982XT, for a girls bike unless it has a step through frame that drops low down to the pedal hub. Or if you do not mind having the bike not level. I do recommend the adapter bar because it will allow you to carry the bike more level which will provide better ground clearance. I have...
    view full answer...

  • Recommended Flat Towing System for 2010 Buick Enclave For Easy Install
  • For your 2010 Buick Enclave and your Blue Ox Alpha Towbar # BX7365, I recommend the Blue Ox Base Plate Kit - Removable Arms # BX1708. This is a custom fit that will work perfectly with your system. The tow bar comes with the safety cables needed, so then you will simply need a high-low adapter bar compatible with your system. I have attached an article to assist as well as linked the page to your options. Then I recommend the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles...
    view full answer...

  • Will the Thule Raceway 3 Bike Carrier Fit a 2010 Buick Enclave
  • Yes, the Thule Raceway 3 Bike Carrier # TH9002PRO is confirmed by Thule to fit your 2010 Buick Enclave. If you will be carrying womens, childrens, or alternative frame bikes, I recommend using the bike adapter bar, # TH982XT, for greater ground clearance and to carry the bike more level. I have linked a video of the adapter as well.
    view full answer...

  • Finding Stoplight Switch Signal to Install Prodigy P2 Brake Controller # 90885 on 2010 Buick Enclave
  • The procedure on the Traverse/Terrain/Enclave is a little different than usual. There are at least two ways to find the stoplight switch signal. You can check under the underdash trim panel for the brake controller connector, as shown in the photo. If the connector is present, you can use a circuit tester like part # 40376 on the wires feeding the connector. One of the wires should go hot with the brake pedal. If the connector isn't present, the brake stoplight signal can be accessed at...
    view full answer...

  • Will Diversi-Tech Aluminum Ball Mount # DTSTBM7000 Fit a 2010 Buick Enclave in Rise Position
  • The distance from the center of the hitch pin hole to the back of the upright bar on the Diversi-Tech Ball Mount # DTSTBM7000 is 4-1/4 inches. To determine if this ball mount will fit on your 2010 Buick Enclave in the rise position you will need to measure from the center of the hitch pin hole to the outside edge of your bumper. If that measurement is less than 4-1/2 inches this ball mount would clear it.
    view full answer...

  • Bulb and Socket Tow Bar Wiring Kit Recommendation for a 2010 Buick Enclave
  • I checked with Roadmaster and they list the Bulb and Socket kit part # RM-522 as a fit for your 2010 Buick Enclave so I would recommend it for you. You wouldn't have any heat issues as long as you install the kit properly. I attached an install video for this kit plus a couple help articles on flat towing for you to check out as well.
    view full answer...

  • How to Tow a Trailer with a 4-Way Flat Connector with a 2010 Buick Enclave with 7-Way Connector
  • To convert the 7-way trailer connector on your 2010 Buick Enclave to a 4-way flat connector, you can use the Hopkins 7-Way RV to 4-Way Flat Trailer Connector Adapter, # HM47365. This adapter will allow you to power the lights on your trailer without having to install a new wiring harness on your vehicle. This way you can tow a trailer with a 7-way in the future if needed.
    view full answer...

  • Plug Location to Install the Kat's Heater # KH11484 on a 2010 Buick Lucerne 3.9L V6
  • According to the Kat's application guide if you have a transverse engine (which it looks like you do) then it will be located at the rear center location (center location of the side towards the driver's seat). This is where you will install the Kat's Heaters Custom Engine Block Heater # KH11484 on your 2010 Buick Lucerne 3.9L.
    view full answer...





^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.