fall hauling headquarters

Trailer Hitch

Change Make

Select Vehicle Model

  
Trailer Hitch

Available Models for 2011 Cadillac Trailer Hitch


Trailer Hitches

You’ve found the #1 online retailer of aftermarket trailer hitches – the best place to research and shop for hitches.

Just tell us your year, make, and model, and we’ll show you everything we know about the custom-fit hitches available for your vehicle: how they look, how they install, towing capacity, and customer reviews. We'll even show you related products that will help you get the most out of your new hitch.

We carry hitches from the leading brands including Curt, Draw-Tite, B&W, Tork-Lift, and Eco-Hitch. We offer hitches for nearly every vehicle on the road, including the most popular makes and models from Ford, Chevy, GMC, Cadillac, Dodge, Jeep, and Toyota.





Trailer Hitches, Front Mount Hitches, Fifth Wheels, Goosenecks, RV Hitches, and Weight Distribution

Custom fit trailer hitches are available for virtually every vehicle. At etrailer.com we carry rear mount trailer hitches, front mount, fifth wheels, goosenecks, RV trailer hitches, and weight distribution systems from the best manufacturers such as Draw-tite, Hidden Hitch, Reese, Torklift and Curt. You will also find a complete selection of hitch accessories and related products such as bike racks, cargo carriers, hitch covers, ballmounts, and locks.


Hitch Accessories



More Trailer Hitches



Trailer Hitch Manufacturers



Accessories



2011 Cadillac Questions and Answers


  • Brake Controller Installation On A 2011 Cadillac Escalade
  • I have the perfect brake controller for your 2011 Cadillac Escalade in the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195. Unfortunately, they do not make a plug in adapter for your vehicle therefore, you will want to hardwire the included wiring harness into the your vehicle's factory wiring harness. To do this, you will only have to connect 4 wires. The black wire from the back of the brake controllers wiring harness will need to be attach to a 12 volt power circuit, the...
    view full answer...

  • Trailer Wiring Recommendation for a 2011 Cadillac SRX
  • In order to determine if you can use Tow Ready Wiring Harness, # 118259, or Curt Wiring Harness, # 56096, you will need to check to see if your 2011 Cadillac SRX has the connection point. The connection point is located beneath the rear of the vehicle behind the bumper. I have included a link to the installation instructions that show what you will be looking for. If you find that connector on your SRX, you can use either harness, though the Tow Ready harness is longer. If you do not...
    view full answer...

  • Maximum Towing Capacity of 2011 Cadillac CTS with Curt Class I Trailer Hitch Receiver
  • I looked at an online copy of the owner's manual for your 2011 Cadillac CTS and it states that your car can tow no more than 1,000 pounds. You should check your owner's manual to verify this. The Curt Trailer Hitch Receiver # C11196 has a maximum towing capacity of 2,000 pounds however this will not increase the capacity of your Cadillac. You are limited by the lowest rated factor which in this case is the car. If you're going to use the hitch to carry anything other than a trailer...
    view full answer...

  • How to Replace Turn Signal Bulbs on 2011 Cadillac SRX
  • Late model Cadillac vehicles can have hard-to-access lighting components as you will find if you do an internet search on the subject. I suggest you check your vehicle warranty on this because the GMPP (General Motors Protection Plan) does possibly cover LED-type lighting assemblies. It does exclude "bulbs" and "sealed beams" but LEDs are neither of those so they may be covered by the GMPP. Check with your local dealer on this. If you end up doing this yourself you'll need to be prepared...
    view full answer...

  • Will Roadmaster Guardian Tow Shield Fit With BlueOx Tow Bars on a 2011 Cadillac SRX
  • The Roadmaster # RM-4000 rock guard is indeed compatible with your Falcon 2 towbar, but it isn't compatible with certain base plate models, such as the EZ5, MS or MX type base plates. Of the current baseplates we offer, the # RM-523162-4 EZ4 base plate would be compatible with the Guardian as long as your SRX isn't a turbo model. I like the KarGard because it will stop the debris before it reaches your vehicle, it folds up, is very durable and requires minimal storage room. To learn...
    view full answer...

  • Which Fuses Need to Be Removed to Flat Tow 2011 Cadillac SRX
  • According to my Roadmaster representative, there are a total of three fuses that need to be disabled to flat tow th vehicle, all of which are located in the fuse box under the dash. You'll look for the BCM1, BCM2 and BCM3 fuses, all of which are 15 amps. Roadmaster recommends the # RM76511 (bypasses 1 fuse) and the # RM76512 (bypasses 2 fuses) fuse bypasses. For more information about flat towing, use the provided links.
    view full answer...

  • Base Plates For 2011 Cadillac SRX
  • If your 2011 Cadillac SRX is not a Turbo model, I recommend the Roadmaster Base Plates, part # RM-523162-4. this base plate system has easy to remove drawbars and when removed makes the remaining brackets almost invisible. This system will work with Roadmaster Quick Disconnects, part # RM-201,and all Roadmaster tow bars. I have attached some links to helpful articles about flat towing you can check out. If there are other items you need for towing please let me know and I will be able...
    view full answer...

  • Tekonsha Primus IQ Trailer Brake Controller Shows PL Error Code on 2011 Cadillac Escalade
  • On the GM tow package wiring under the dash of vehicles like your 2011 Cadillac Escalade, there are typically 5 wires: ground, 12 volt power, output to trailer brakes, input from stop light switch, and illumination. If you have the brake controller red wire connected to the illumination wire this may be causing the problem. It is also possible that there is a bad ground connection. You can test this by attaching the white brake controller wire to the negative battery terminal of a separate...
    view full answer...

  • Why Should Stabilization Strap Be Used on Non-trailer Loads for Curt Class I and II Trailer Hitches
  • To be in compliance with Curt Manufacturing warranty requirements, a stabilization strap is to be used on class I, II, and some class III trailer hitches as indicated in the instructions. Draw-Tite does not require a strap. What the strap does is help support a non-trailer load, such as a cargo carrier, and reduce some of the stress to help ensure the hitch, vehicle, and cargo are not damaged. The strap in question can really be any rigid strap, or Curts own # 18050, so long as it helps...
    view full answer...

  • Roof Mounted Cargo Box Recommendation for a 2011 Cadillac SRX with Factory Roof Rack
  • According to our fit guide, the Thule Ascent 1700, # TH605, is not a direct fit to a 2011 Cadillac SRX with a factory roof rack. In order for it to fit, according to Thule, you would need to first install Thule Crossroad Roof Mounted Roof Railing Foot Pack, # TH450, and Thule Load Bars, # THLB50, to provide the proper crossbar spacing to mount the Ascent. Another option would be to go with a different box. Yakima has several boxes that they have indicated are a direct fit. Take a look...
    view full answer...

  • How to Pick Out Replacement Trailer Tires
  • In order to pick out the correct tire size to replace what you currently have you are going to need to know what size tire is on your PWC trailer. There will be a size stamped on the side of the tire, if you check out the picture I attached you will see what it should look like. Once you know the size of your trailer tires check out the FAQ article I attached to the right that will have all of the trailer tire sizes we offer. You will need to select your tire size from that chart and...
    view full answer...

  • Recommended Trailer Wiring Harness and Class III Trailer Hitch Receiver on 2011 Cadillac SRX
  • If your 2011 Cadillac SRX already has the connector to plug a trailer wiring harness under the rear bumper then all you need for a wiring harness is the Tekonsha Custom Harness # 118259. This plugs directly into the connection and provides you with a 4-way trailer connector that will hang under the Cadillac's rear bumper. We recommend mounting the 4-way, with a mounting bracket, like # 18144 or for a less permenant option, the Mag-Flat # 38095. If your Cadillac did not have the connector...
    view full answer...

  • Will Roadmaster Brakemaster RM-9160 work on Winnebogo with Air Brakes
  • As long as your air brake system is functioning properly on your RV the Brakemaster part # RM-9160 would fit and work well. The system would not affect the RV's braking performance either.
    view full answer...

  • Trailer Hitch Recommendation for a 2011 Cadillac CTS Sedan With Removable Ball Mount
  • It sounds like you want a trailer hitch with a ball mount and hitch ball that can be removed. There are trailer hitches available for your 2011 Cadillac CTS Sedan that will allow you to use a 2 inch ball on a removable ball mount. The trailer hitch that I would recommend for you is the Draw-Tite Class I Trailer Hitch, # 24767. You would only need to add the ball mount and hitch ball. For a 2 inch hitch ball, use part # 19258. If you want a 1-7/8 inch hitch ball, use part # 19256. Keep...
    view full answer...

  • 2011 Escalade ESV Electric Trailer Brake Controller Installation Troubleshooting
  • On your 2011 Cadillac Escalade, the wiring present under the dash is most likely not connected correctly on your Prodigy P3 brake controller # 90195. There is a good chance that the red wire that connects to your brake light switch is getting the constant power signal. It should only receive power when the brake pedal is depressed. Use a circuit tester like # PTW2993 to test this connection. I've attached a video and an article to assist.
    view full answer...

  • Is There a Slider Fifth Wheel Hitch Adapter Available for Gooseneck Hitch
  • If the truck has a B and W gooseneck hitch we do have a slider fifth wheel hitch that will fit it, part # BWRVK3400 but if the gooseneck hitch is any other brand there isn't a slider hitch adapter available.
    view full answer...

  • Is T-Wiring Harness Available For 2011 Cadillac CTS Sport Wagon
  • The wiring I recommend for your 2011 Cadillac CTS is the Tow Ready wiring, part # 119179KIT. Currently there are no T-harness wiring kits available. This kit includes the circuit tester and is designed for your vehicle with the combined wiring. This kit can be used whether you have LED or incandescent lights on your CTS. The included Modulite protects against mis-wire and electrical short circuits, which can damage the vehicle wiring. I have included the instructions that show how the...
    view full answer...

  • Will the Rola Roof Rack # 59893 Fit a 2011 Cadillac SRX
  • Provided your 2011 Cadillac SRX has the factory raised side rails that run front to back, the Rola roof rack # 59893 will fit. And it will look like the pictures you see on the product page. I have included a link to the installation instructions for you to view.
    view full answer...

  • Trailer Hitch Mount Cargo Carrier Recommendation for a 2011 Cadillac SRX
  • We have many hitch mount cargo carriers that will work well with your 2011 Cadillac SRX. Before we can select the correct carrier for you, we will want to know the size of your trailer hitch receiver. There are Class II trailer hitches with a 1-1/4 inch receiver and Class III trailer hitches with a 2 inch receiver available for your SRX. I have attached a photo showing how to measure your trailer hitch receiver to determine the size. The next factor to consider is bumper clearance....
    view full answer...

  • Will Westin Sportsman Grille Guard, # 45-2130 Fit a 2011 Cadillac Escalade without Tow Hooks
  • I spoke with my contact at Westin about Sportsman Grille Guard, # 45-2130, for the 2011 Cadillac Escalade. He stated that the vehicle does not have to have tow hooks for installation. If it did, they would have to be removed. I have incldued al ink to the installation details for you to view.
    view full answer...

  • Does Roadmaster Signal Converter RM-732 Convert Separate Turn Signals to Combined
  • To convert separate taillight circuit to combined circuits the part # RM-732 is the correct adapter to do this. If you wire the circuits of the right side of the box to your vehicle the circuits would be combined on the left side.
    view full answer...

  • Recommended Hitch for 2011 Cadillac SRX
  • There are Class II and Class III hitches available for your SRX. I'd recommend going with a Class III hitch because it's more common and there's more accessories available for the 2 inch Class III receiver. I'd recommend the Curt Class III, part # C13002. This hitch has a higher capacity than the other hitches, but you might be limited by the towing capacity of your vehicle. Consult your owner's manual for specifics. This hitch is actually the lowest-priced of the Class III options,...
    view full answer...

  • Towing Light Recommendation for 2011 Cadillac SRX with LED Taillights
  • I spoke with my contact at Tow Ready and using the Vehicle to Vehicle Taillight Converter, # 118158, on a vehicle with LED taillights can be problematic. Since the LED lights draw less power, it can cause the lights to be faintly lit when they should not be. If you are looking to operate the signal lights on your 2011 Cadillac SRX while it is being towed, I recommend going with Pilot Magnetic Tow Lights, # NV-5164. These removable LED lights provide signal lights for your towed car without...
    view full answer...

  • Can the Frame Be Painted On Hopkins Backup Sensor System # HM60100VA
  • The Hopkins Backup Sensor System , part # HM60100VA, you have referenced is a mounting bracket with 2 sensors that give off an audible alarm when detecting an object when going in reverse. It does not have a camera. The mounting bracket can be painted, but you will not want to paint the sensors. If you are wanting the backup sensor system with a camera and monitor you will need to use the Hopkins Rear View Camera with Backup Sensors, part # HM60195VA. This is the mounting bracket, sensors,...
    view full answer...

  • Recommendation for Truck Mounted Rack on a 2011 Cadillac SRX
  • The neat thing about the Hollywood Trunk Mounted Bike Racks are that the Over-The-Top uses top support arms and contact points to route the straps over the spoiler, so there is no downward force specifically on the spoiler. This setup is necessary if the spoiler is plastic because it can become deformed or damaged under the extra weight. Their Over-The-Top model is available in a 2 bike version as part # HRF2 or as a 3 bike version, part # HRF2-3. Another option would be to install...
    view full answer...

  • Recommended Slip-On Towing Mirrors for a 2011 Cadillac Escalade
  • According to my research, the blind spot monitoring devices on your 2011 Cadillac Escalade are in the rear bumper therefore, the CIPA Custom Towing Mirrors part # CM10900 should not interfere with this feature. As long as the chrome strip you are referring to is flush with the mirror housing then they should work well for you. The heated feature of your factory mirrors will also not be lost while using these slip-on towing mirrors.
    view full answer...

  • Recommended Slide Out Awning and Installation Help
  • The Solera 10.5' Slider (Slide-Topper) in Black w/ Black Hardware # LCV000182037 is designed for slide out boxes that are 116 inches to 121-3/4 inches when measured from flange to flange. These measurements are found on each of the product pages so you can ensure the correct fit for each slide out. I've linked the page to all your options to help if another size is needed. They will work well to keep rain and debris out of the slides. I've attached some videos to assist with the installation...
    view full answer...

  • Selecting Weight Distribution System for Use with Trailer Towed by 2011 Cadillac Escalade
  • To ensure you can use a weight distribution hitch system on your 2011 Cadillac Escalade you'll just want to check the sticker on the vehicle's hitch. Look for a weight rating for weight distribution (or "WD") on the hitch's sticker. The hitch must be a 2-inch size that has a specific rating for use with WD systems. The real matching of the WD system relates to the trailer. The WD system needs to be selected based on the actual total tongue weight (TW) of the trailer when it is fully...
    view full answer...

  • Will the Thule Passage 2 Bike Rack # TH910XT Fit a 2011 Cadillac SRX
  • The Thule Passage 2 Bike Rack, # TH910XT, will fit the 2011 Cadillac SRX as long as it does not have a plastic spoiler at the top of the rear hatch. Plastic spoilers were not designed to support the weight of a bike rack and bikes and could be deformed or damaged. If the spoiler is metal, then it will have no problem supporting the weight and this bike rack would work well for you. If your spoiler is plastic, then I recommend using the Hollywood Racks Over-the-Top Bike Rack, # HRF2....
    view full answer...

  • WeatherTech Floor Mats and Mud Flaps for a 2011 Cadillac Escalade ESV
  • For Floor mats, WeatherTech does offer floor mats for your vehicle. There's mats available in black, gray and tan. Front, second row, third row and cargo area mats are available, depending on the set-up of your interior. To find the correct mats for your Escalade ESV, click the link I've provided over to the right. Use the drop down menu, and select the category that matches your Escalade (ESV without 3rd Row Seating, ESV with 3rd Row Seating 2nd Row Bucket Seats or ESV with 3rd Row...
    view full answer...





^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.