View Cart

Dodge Dakota Trailer Hitch

Select Vehicle Year

  
Trailer Hitch

Available Years for Dodge Dakota Trailer Hitch


Trailer Hitches

You’ve found the #1 online retailer of aftermarket trailer hitches – the best place to research and shop for hitches.

Just tell us your year, make, and model, and we’ll show you everything we know about the custom-fit hitches available for your vehicle: how they look, how they install, towing capacity, and customer reviews. We'll even show you related products that will help you get the most out of your new hitch.

We carry hitches from the leading brands including Curt, Draw-Tite, B&W, Tork-Lift, and Eco-Hitch. We offer hitches for nearly every vehicle on the road, including the most popular makes and models from Ford, Chevy, GMC, Cadillac, Dodge, Jeep, and Toyota.




Trailer Hitches, Front Mount Hitches, Fifth Wheels, Goosenecks, RV Hitches, and Weight Distribution

Custom fit trailer hitches are available for virtually every vehicle. At etrailer.com we carry rear mount trailer hitches, front mount, fifth wheels, goosenecks, RV trailer hitches, and weight distribution systems from the best manufacturers such as Draw-tite, Hidden Hitch, Reese, Torklift and Curt. You will also find a complete selection of hitch accessories and related products such as bike racks, cargo carriers, hitch covers, ballmounts, and locks.


Hitch Accessories



More Trailer Hitches



Trailer Hitch Manufacturers



Search For Custom Fit Dodge Dakota Accessories
Select A Category Below



Dodge Dakota Trailer Hitch Videos

Trailer Hitch Installation - 2011 Dodge Dakota - Curt

Today on our 2011 Dodge Dakota, we'll be installing and taking a look at the Curt Trailer Hitch Receiver, class three with a two inch opening, part number 13229. Here's what our Curt Trailer Hitch looks like installed on our Dodge Dakota. Very easy, three bolt installation, and it requires no drilling, using the assisting holes from the factory to install it. It's made from a nice sturdy steel construction, has nice black inaudible 00:00:23 finish that's going to resist rust and corrosion. This is a class three with a two inch by two inch opening and a five inch pinhole. You have easy access to your chain hold downs here when you hook up to your trailer for your safety chains, and this hitch is rated for 500 pounds of tongue weight and 5000 pounds of towing capability. You always want to double check your vehicle's capacity, and use whichever is lower between the vehicle and the hitch. I'll give you some measurements to help choosing some accessories for your new hitch.



Trailer Hitch Installation - 2003 Dodge Dakota - Curt

Today on this 2003 Dodge Dakota, we're going to install part number C13280 from Curt. This is what the hitch looks like once it's installed on the truck. Next we'll give you some measurements to help you out in selecting some accessories, such as a ball mount, a bicycle rack or a cargo carrier. From the top of the receiver opening down to the ground will be about 16 inches. From the center of the hitch pin hole to the edge of the bumper will be about 4 1/2 inches. Now we'll go ahead and show you how the hitch is installed. First thing we need to do is look on the side of the frame at the the very end and remove the rear most bolt.



Trailer Hitch Installation - 2003 Dodge Dakota - Draw-Tite

Today, on this 2003 Dodge Dakota, we're going to install part number 75073 from Draw-Tite. All right, this is what the hitch looks like once installed on the truck. Next, we'll give you some measurements to help you out in selecting some accessories, such as a ball mount, a bicycle rack, or a cargo carrier. From the top of the receiver opening down to the ground, we have got 15-1/2 inches. From the center of the hitch pin hole to the edge of the bumper will be about 3-7/8 inches. Now, we'll go ahead and show you how the hitch is installed. To start off our install, we have to remove two pieces of original hardware, located on the side of the frame towards the top. We'll go ahead and remove these fasteners first.



Trailer Hitch Installation - 2011 Dodge Dakota - Draw-Tite

Today on this 2011 Dodge Dakota Crew Cab, we're going to install part number 75251 from Draw-Tite. This is a class III 2" receiver hitch. To start off, we need to get our truck ready to install our hitch. There's two bolts on each side of the frame that have to remove. Here and here, this is the passenger side, and the same two bolts on the driver's side. We'll remove those first. We'll use a 21mm socket to remove these bolts.



Trailer Hitch Installation - 2001 Dodge Dakota - Curt

Today on our 2001 Dodge Dakota we will be installing the CURT hitch trailer receiver part number C13280. Now here's what our hitch looks installed on our vehicle. Now we'll go ahead and give you a couple measurements in helping you choose some accessories for your hitch. Such as a ball mount, a bicycle rack, or cargo carrier. From the center of the hitch pin hole to the outer most edge of the bumper is approximately five inches. From the top of the opening in the receiver to the ground is approximately fourteen and three quarter inches. Now let's go ahead and install our hitch. We are going to begin here underneath the passenger side of the vehicle.



Trailer Hitch Installation - 2005 Dodge Dakota - Curt

Today on this 2005 Dodge Dakota were going to install part number 13229 from Curt. This is what the hitch looks like once installed on the truck. Next well go ahead and give you some measurements that will help you out in selecting some accessories such as a ball mount, a bicycle rack, or a cargo carrier. From the top of receiver opening down to the ground is going to be 18 inches. From the center of the hitch pin hole to the edge of the bumper is going to be 2-1/2 inches. Now well go ahead and remove the existing hole plug if its present on the center of the bumper.





Dodge Dakota Trailer Hitch Questions and Answers