shop gifts
shop gifts

Brake Controller

Change Make

Select Vehicle Model

  
Brake Controller

Available Models for 2003 Land Rover Brake Controller


Brake Controller

Brake controllers are an essential part of a towing system with electric trailer brakes, and they offer a much-needed emergency braking feature. We offer high quality controllers from manufacturers such as Draw-Tite, Tekonsha, Valley, Hidden Hitch and Hopkins. Featuring both time-delay and proportional models, we have the right controller for any application. Brake controller wiring adapters are available for many vehicles, allowing for simple plug-and-play installation. Hardwire kits are also available to make any installation hassle-free.

Find your custom fit brake controller wiring adapter for a plug-in application by selecting the year of your vehicle to the left. We offer custom fit plug in adapters for many of the most popular vehicles, including Ford, Chevrolet, Dodge, GMC, Nissan, and Toyota.






Brake Controller Manufacturers


Accessories



2003 Land Rover Questions and Answers


  • How Much Weight Gets Transferred To Trailer Axles and Vehicle Front Axle with Weight Distribution
  • The key to weight distribution is not to have an exact percentage of the weight transferred to either of the axles. The whole goal behind all of if it is to have your tow vehicle sit as level as possible so that it will brake and handle the best possible. Since that is the goal and different vehicles have different spring rates and wheelbases the percentages distributed to each axle won't be uniform between setups. An exact figure can't be given although some claim that when properly...
    view full answer...

  • Trailer Brake Controller Wiring Instructions for a 2003 Land Rover Discovery II
  • If your Land Rover came equipped with a factory installed tow package, you can choose a brake controller, like the P3 brake controller, # 90195, and then contact your dealer about where and how it would connect under the dash. If you don't have the tow package, you would need the controller and the Electric Brake Controller Installation Kit, # ETBC7, along with a working 4-way connector, # 119178KIT if needed, at the rear of your Discovery. We have detailed instructions, see link, for...
    view full answer...

  • Tow Bar and Wiring Harness Recommendation for a 2003 Land Rover Discovery
  • I did some research on your 2003 Land Rover Discovery and I could not find any information regarding the ability to flat tow your vehicle. I recommend checking your owners manual to make sure it is safe to flat tow your vehicle behind your motor home. Vehicle manufacturers will often place restrictions on vehicles when towing them behind another vehicle or motor home. If you find that it is okay to tow your Discovery, then you will need tow bar wiring like the Roadmaster Universal Wiring...
    view full answer...

  • Parts Needed to Flat Tow 2003 Land Rover Discovery II
  • You would first need to start with a base plate kit confirmed as a fit for your 2003 Land Rover Discovery II. For that we have the Roadmaster XL kit part # 1910-1 which will work well. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the...
    view full answer...

  • Selecting a 2-Bike Rack for a 2003 Land Rover Discovery II SUV
  • I recommend trying to find a bike rack with a long enough shank to clear your spare tire. To find out how much clearance you need, take a tape measure and find the distance from the center of the pin hole on your hitch to a point past your spare tire. I have included a link to a page with all our 2 inch hitch mounted 2-bike racks. The shank length, center of pin hole to back of upright bar, is listed in the descriptions on each of the bike racks. If you cannot find one with a long enough...
    view full answer...

  • How to Install Surco Safari Rack 5.0 Rooftop Cargo Basket on 2003 Land Rover Range Rover
  • The Surco Safari Rack 5.0 Rooftop Cargo Basket # SPS5084-T400 referenced in your question is designed to mount to aftermarket Thule Roof Racks. For a Thule Roof Rack that is confirmed to fit your 2003 Land Rover Range Rover, I recommend the Thule Traverse Square Bar Roof Rack. This system consists of # THLB58 for the 58 inch Square Load Bars, # TH480 for the Traverse Foot Pack, and # THKIT1274 for the Fit Kit. Once installed, this will give you a sturdy roof rack system with a weight...
    view full answer...

  • Brake Controller Wiring for a 2003 Land Rover Defender SW
  • The Universal Brake Control Wiring Adapter Ford, Land Rover, Lincoln, Mercury, part # 3035-S, will fit Land Rover LR3 and Range Rover within the model years 2005-2007. We do not have a plug-in adapter for the 2003 Land Rover Defender. That would lead me to believe that there is not a port under the dash of that year, make and model of vehicle. You will need to hardwire your Land Rover to accommodate a brake controller. You can do so with the Brake Controller 7 & 4 Way Installation Kit,...
    view full answer...

  • Roof Rack for a 2003 Land Rover Discovery II for Use with a Cargo Bag
  • If your 2003 Land Rover Discovery II has the side rails that run front to back then you can use Thule Crossroads, # TH450 with Load Bars # THLB50. If it has a naked roof then you will need Gutter Feet # TH953 and Load Bars # THLB65. The bar spread though would be shorter than the length of the bag. The other option is to use a roof mount cargo bag that does not require any type of roof rack. I have included a link to the bags that we carry that do not require side rails or crossbars...
    view full answer...

  • Cargo Basket Recommendation for a 2003 Land Rover Discovery II with Raised Roof Rails
  • The Surco Safari Roof Rack part # SPS5060 has been confirmed as a fit for the factory roof rails of your 2003 Land Rover Discovery II.
    view full answer...

  • Adding a 5-Way Flat Trailer Connector to a 2003 Land Rover Discovery II
  • Since the 2003 Land Rover Discovery has a 4-Way round connector it is most likely already converted. There should be one pin for right turn/brake lights, one pin for left turn and brake lights, one pin for running lights, and one ground pin. You can use a circuit tester like # ALL640595 to confirm. We do have an adapter that connects to a 4-Way round but it has a 4-Way flat at the other end, # 47465 so you would need another adpater like # 20036. What I recommend is to replace the...
    view full answer...

  • 7-Way Trailer Wiring Recommendation for 2003 Land Rover Discovery II
  • We have trailer wiring solutions for your 2003 Land Rover Discovery II but they are hardwired harnesses with like the part # 119147KIT that provides the taillight signals that you'd need to start with. Then from there you'd need to convert it to a 7-way you'd need the part # 37185 which is the style that uses blades for the pins. If you need a 7-way with pins you'd also need the adapter part # 47595. We do not carry any 6-way flat connectors so I am fairly certain what you are referring...
    view full answer...

  • Bike Rack Solution for 2003 Land Rover Discovery II
  • The Surco part # BT300 just hasn't been test fit on your vehicle. There's a chance the rack would fit, but in reality we can't say for certain. Best solution I can recommend is a hitch bike rack with plenty of clearance between the hitch pin hole and the bike rail like the Thule # TH9044. You'd need a hitch too if your vehicle doesn't have one, the Curt part # 13455 is a confirmed fit and would work well.
    view full answer...

  • Will Wheel Masters Vision Plus Extendable Towing Mirrors Fit a 2003 Land Rover Discovery
  • The Wheel Masters Vision Plus Extendable Towing Mirrors part # WM6500 has not been fit tested on the 2003 Land Rover Discovery II. However, I spoke to my contact at Wheel Masters who said you can test this yourself by checking under the edge of the bottom of your vehicle's door. If the door's bottom edge is more than 1-1/2 inches wide, the mirrors will not fit because it will be too wide for the clips to strap onto. If the edge is less than 1-1/2 you have a fit. If they don't work you...
    view full answer...

  • Can Roadmaster Safety Cables be Used on a 2003 Landrover Discover II with Blue Ox base Plates
  • The Roadmaster 68-inch Single Hook Safety Cables # RM-643, will work out great for use with your Roadmaster Falcon tow bar and Blue Ox Base plates. However, you will need to use the adapter bar specified for using Roadmaster tow bars with Blue Ox base plates; the Roadmaster Tow Bar Adapter # RM-031. The Roadmaster safety cables # RM-643 will work wonderfully with the Roadmaster built-in cable guide on the Falcon tow bar. The safety cables that you mentioned above, the Roadmaster...
    view full answer...

  • Will the SportRack Spare Tire Mount Bike Rack # SR2813 Work on a 2003 Land Rover Freelander
  • The SportRack 3 Bike Spare Tire Mount Bike Rack, # SR2813 is not confirmed as a fit for your 2003 Land Rover Freelander. However, another spare tire mounted bike rack that will work on your Trooper if the measurement you get is less than 5-1/4 inches is the Thule Spare Me 2 Bike Carrier - Spare Tire Mount, item # TH963PRO. It comes with a limited lifetime warranty. I have provided a link to all of the spare tire mounted racks that are confirmed as a fit for your vehicle for your reference.
    view full answer...

  • Recommended Supplemental Braking System Recommendation for Land Rover Discovery II
  • The AutoStop braking systems can be used on several vehicles as long as they are using the correct corresponding tow bar. That being said, our installers here are not big fans of the AutoStops at all. I can't recommend them for you as I don't think it will work very well for you. The common complaint is that it's difficult to install and doesn't offer much braking performance. The easiest system to set up and use is the Blue Ox Patriot # BRK2016, that applies the vehicle brakes in...
    view full answer...

  • Parts Needed to Install Brake Controller in a 2003 Land Rover Range Rover with 4-Way
  • Since you have a 4-way installed on your 2003 Land Rover Range Rover currently we have just what you would need to install a brake controller. You would need the part # ETBC7. This will convert the 4-way to a 7-way and comes with everything needed to install a brake controller. For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional...
    view full answer...

  • Why Do Swinging Bike Racks All Swing Towards Passenger Side
  • The reason bike racks all swing to the driver side is beause when people pull over on the side of the highway they almost always pull to the right side. So if you were on the side of the highway and needed to swing the bike rack out you wouldn't want to swing it out into traffic. That's why the bike rack manufacturers like Kuat make their pivots like the part # PV20B swing to the passenger side.
    view full answer...





^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.