Menu Icon
shop gifts
shop gifts

Fifth Wheel Hitch

Change Make

Select Vehicle Model

  
Fifth Wheel Hitch

Available Models for 1995 Ford Fifth Wheel Hitch


5th Wheel Hitch with Custom Installation Kit

Big trucks require big hitches! We offer high quality B&W, Reese, Draw-Tite, Husky, Demco and Curt fifth wheel hitches that are the perfect fit for your heavy duty towing needs. From standard 5th wheel hitches to slider systems for short bed trucks, we have an application for you. From our Pro Series fifth wheel to Reese's top-of-the-line Signature Series, you can find the perfect fifth wheel for your payload while staying within your budget.

We offer custom rail kits for many of the most popular vehicles including Ford, Chevrolet, Dodge, GMC, and Toyota. Choose a Signature Series hitch and rails to retain full use of your truck bed while not towing. Find the custom installation kit for your vehicle by entering the year, make, and model to the left.

Add a fifth wheel lube plate, pull pin lock plates, and in-bed wiring to round out your fifth wheel towing setup.





Fifth Wheel Hitch Accessories



Fifth Wheel Hitch Manufacturers



Accessories



1995 Ford Questions and Answers


  • Wiring Diagram for a 1997 Peterbilt Semi Tractor with 7-Pin Round Connector
  • The wiring color codes and wire gauge recommendations for the Pollak Heavy-Duty, 7-Pole, Round Pin, Trailer Wiring Connector, item # PK11700, are listed below. White - Ground Return - 8 gauge Black - Clearance, Side Marker, Identification - 12 gauge Yellow - Left Turn and Hazard Signal - 12 gauge Red - Stop Lamps and Anti-Lock Devices - 10 gauge Green - Right Turn and Hazard Signal - 12 gauge Brown - Tail, Rear Clearance, Marker and License-Plate Lamps - 12 gauge Blue - Auxiliary...
    view full answer...

  • Wiring Diagram for 7-Pole RV Trailer Connectors For a 1995 Ford Windstar GL Van
  • Yes, we have a wiring diagram for the 7-Pole, RV-Style Trailer Socket, # PK12-707E. I have added a photo of the wiring diagram for the vehicle side and trailer side connector for you to review and I have added a link to our trailer wiring diagrams page which has more information about trailer connector wiring diagrams for you. If you are looking to add a 7-Way RV connector to your 1995 Ford Windstar, we have all of the wiring you will need. You would start with a working 4-Way connector,...
    view full answer...

  • Wiring Installation Instructions for Hopkins LED-Compatible Tail Light Converter # HM48895
  • The trailer wiring harness you referenced, Hopkins # HM48895, is intended for vehicles that use LED tail lights which draw relatively little power as compared to standard incandescent lights. I do not believe that your 1995 Ford Explorer came equipped with LED-type lighting and this harness is not among those recommended for your vehicle. The red wire on this harness does connect to the brake light circuit as you noted in the instructions. You can identify which wire at your Explorer's...
    view full answer...

  • Best Anti-Rattle Device Recommendation for a 2 inch Ball Mount
  • The most popular anti-rattle device we carry that is designed for use with a 2 inch hitch would be the part # 63232. This will install in the hollow shank of a 2 inch ball mount and will secure it to the side of your hitch so that it stop rattling. It also doubles as a hitch lock. I attached an install video for you to check out as well.
    view full answer...

  • Adding a 7-Way Trailer Connector on a 1995 Ford F-250 with No Existing Trailer Wiring
  • For a 1995 Ford F-250 that never had trailer wiring you will first need to install # 118316. Then you can install the 4 and 7 way installation kit # ETBC7. The other option is to use a circuit tester like # ALL640595 if needed to determine the functions of the wires you have found and hardwire them to the ETBC7 by cutting off the 4-Way end and splicing on the truck wires. On the ETBC7 4-Way, brown is running lights, green is right turn and brake lights and yellow is left turn and brake...
    view full answer...

  • Replacement Rear Chrome Bumper for a 1995 Ford F-150 Eddie Bauer Edition
  • There are a few different chrome bumper options for the 1995 Ford F-150, see link. These are all universal fit bumpers. A Perfect Match (custom fit) is not available for the 1995 model year.
    view full answer...

  • Hitch Recommendation for a 1992 International School Bus
  • The only type of hitch I could recommend for a school bus would be a multi-fit hitch like the # 13703 that is a universal style hitch designed to fit frames that are between 22 and 72 inches apart. This hitch can fit virtually all frame styles so it should work for you, but check out the install video and instructions I attached first.
    view full answer...

  • Adding a 7-Way Trailer Connector to a 1995 Ford F-150 that has a 4-Way Trailer Connector
  • In order to add a 7-Way trailer connector to your 1995 Ford F-150 that has a 4-Way, you would need # 37185. I have linked a video to the right that will help with the installation. Since your truck has a 4-Way already there will be a connector under the truck that has the remaining wires needed to attach to the 37185. I have also included a help article that explains this.
    view full answer...

  • How to Install a 7-Way and 4-Way Trailer Wiring Connector On a 1995 Ford F-350 SuperDuty
  • Installing a 7-Way and 4-Way combination trailer connector, like part # HM40975-11998, that you referenced, on your 1995 Ford F-350 is fairly easy, but for these trucks there are 2 different wiring situations if you do not have a factory 7-way trailer connector. If your vehicle has factory 4-Way trailer wiring at the back you can use the Pollak 7-Pole and 4-Pole Trailer Connector, # HM40975-11998, and splice the wires to the wires under the rear of the vehicle along the drivers side...
    view full answer...

  • Installing Brake Controller in 1995 Ford F150 with Aftermarket 4-Way Trailer Connector
  • Since your truck is apparently not equipped with the factory 4-way connector, the brake controller output wire has not been run to the rear of the truck. You will need the 4 to 7-way trailer connector adapter, part # 37185 and the brake controller wiring adapter, part # 3035-P. The adapter would plug into the connector under the dash, and the other end would plug into a Tekonsha Brake controller, or if you have another brand you'd just cut off the black connector and wire it to the controller....
    view full answer...

  • What Bracket and Rail Kit to Install Reese Trail Boss 15K 5th Wheel Hitch on 1995 Ford F350
  • We do not offer a custom-fit 5th wheel install kit for your 1995 Ford F350, but we do have a universal-fit install kit from Reese, part # RP30035. This kit includes universal under-bed brackets and their mounting hardware, as well as the above bed rails and the hardware required to mount those to the under-bed brackets. Drilling will be required to install this kit. I confirmed with my contact at Reese that this kit is fully compatible with their Trail Boss 5th wheel hitches. It will...
    view full answer...

  • Stake Pocket Tie-Down Anchors for Use on Car Hauler Trailer
  • We offer a range of stake pocket tie downs for truck and trailer applications that can be seen on the link provided. Most of these products are intended for use on trucks where the vehicle stake pocket dimensions are known, but we also offer universal-fit types that may be better suited to your trailer application. For example, Putco offers their Push-Up Tie-Downs # P99901 that are made of stainless steel and which offer a 1000-lb capacity per pair. Brophy offers a stake pocket tie...
    view full answer...

  • Easiest to Install Tire Chains for Tire Size LT235/85R16
  • The easiest to install set of tire chains we offer for the tire size of 235/85-16 is the Pewag Snox part # PWSXV600. It's the only tire chain we offer for your size that does not require you to drive a few feet and then make more connections. Nor does it require you to make any connections after draping the chain over the tire. I attached an install video for you to check out as well.
    view full answer...

  • Off Road Snow Chain Recommendation for Tire Size 275/60-17
  • What you would want is the Peweag All Square Mud Service Chains part # PWE2439S. These are a fit for your tire size of 275/60-17 and will give you the best traction for a mud/snow application. I attached a test video for these chains for you to check out as well.
    view full answer...

  • Installing a Tekonsha P3 Brake Controller on a 1995 Ford F-150 with Factory 4-Way Trailer Connector
  • To install the Prodigy P3 brake controller, # 90195 in your 1995 Ford F-150, you will just need the # 3035-P wiring harness and an Adapter 4 Pole to 7 Pole and 4 Pole, # 37185. The brake controller will plug into a factory plug under the dash, near the center console. I have included a link to the installation details for the brake controller. To install the # 37185 harness, the existing 4-Way will plug into the back of the # 37185. Next, follow the wiring for the 4-Way back towards...
    view full answer...

  • Trailer Hitch Recommendation for a 1995 Ford Mustang GT with Dual Exhaust
  • The Draw-Tite Trailer Hitch, # 24687, is designed to fit all models of the Ford Mustang, from 1994 to 1998, so it will fit your 1995 GT with dual exhaust. I have included a link to the installation instructions for reference. The instructions also state that the drilling required at the bumper requires a 7/16 Inch Rotabroach Hole Cutting Tool with Pilot, # 40110. If you plan to do some towing, the recommended ball mount is not included with the hitch. You can use ball # 19256 (1-7/8...
    view full answer...

  • Recommended Fifth Wheel Tailgate For 1995 Ford F-350
  • The fifth wheel tailgate that is designed to fit your 1995 F-350 is part # VG-100. This tailgate is made of a heavy-duty steel tube construction and has a weight capacity of 100 lbs. All of the hardware is included with the tailgate to attach it to your truck.
    view full answer...

  • Brake Controller Connector Location on a 1999 Ford F-150
  • The OEM plug is located under the dash near the center console on most vehicles. We offer the # 3035-P wiring adapter for Tekonsha brake controllers that have the plug on the back. If your controller has bare wires exiting the back, you can still use the # 3035-P harness, you'd just cut off the black plug and wire the harness to your controller color for color.
    view full answer...

  • How to Wire a Trailer with Electric Brakes to a 1995 Ford F-150
  • We can certainly help you get set up with what you need to tow your trailer. Starting with the brakes on the trailer, (which I am going to assume are operational) each brake magnet will have two leads coming out of it. One lead needs to be grounded to the trailer, the other needs to be connected to a 10 ga. wire that runs to the tongue of the trailer. Run one lead from the brakes on the other side to this wire as well. On the trailer side, you will need a 7 way connector plug, part # H20046,(there...
    view full answer...

  • 5th Wheel Install Kit for a Valley Power Pull Hitch and 1995 Ford F-350
  • Your Valley Power Pull 5th wheel trailer hitch will fit in industry standard above-the-bed rails from Reese, Husky, and Pro Series. For your 1995 Ford F-350 I recommend universal installation kit # RP30035. The universal kit is a lower cost option but does require drilling into the truck frame and takes longer to install compared to custom fit kits.
    view full answer...

  • Shank Dimensions of B&W Tow & Stow 2-Ball Mount # BWTS10040B
  • The measurements you requested for the B&W Tow & Stow 2-Ball Mount # BWTS10040B are shown on the included photo. I pulled a piece from our warehouse and took two sets of measurements along the shank; these were taken both from the edge of the weld and also from the nearest edge of the vertical part of the shank. The linked photo shows these 4 measurements taken relative to the centers of the two hitch pin holes.
    view full answer...

  • Fifth Wheel Rail Spacing and Available Fifth Wheel Hitch For 1995 Ford F250 and 2006 Chevy Duramax
  • The Reese Universal Base Rails, part # RP30035, will have a mounting hole measurement of 22 inches, center to center, from front to back and 29 inches, center to center, from side to side. It will accept the Curt, Draw-Tite, Hidden Hitch, Reese, Valley and Husky fifth wheel hitches. I am attaching a photo that will show those dimensions. If your 1995 Ford F-250 is a short 6-foot bed you will need to use a slider fifth wheel hitch that will give you an extra 10 to 12 inches in travel...
    view full answer...

  • Installing 4-Way Wiring Harness On 1995 Ford Explorer
  • The wiring harness for your 1995 Ford Explorer should be on the passenger side of the vehicle behind the bumper. This harness should have a cap on it you can remove and then plug the harness designed for your vehicle, part # 118241 right into it. The harness you found may not be the correct one. Per the instructions for the # 118241, you will find the connector on the passenger side behind the bumper for an Explorer. When working with electrical connectors I recommend using dielectric...
    view full answer...

  • 5th Wheel Trailer Hitch Install Kit for a 1995 Ford F-250 and Reese 14K 5th Wheel Hitch
  • For your 14K Reese 5th wheel trailer hitch and 1995 Ford F-250 I recommend the Reese universal installation kit # RP30035. This installation kit fits all configurations for the 1995 F-250 (short or long bed, with or without overload springs). I have linked a video showing an example installation. The details of the installation won't be exactly the same as your 1995 F-250 but the process is basically the same. I have also linked the installation instructions. To add an in-bed 7-Way...
    view full answer...

  • Fifth Wheel Tailgate for a 1995 Ford F-350 Dually Long Bed
  • The Fifth Wheel Tailgate, # VG-100, is custom for a 1995 Ford F-350 so it will fit. The majority of the tailgate has steel framing. This heavy-duty steel is very strong and durable. .
    view full answer...

  • Recommendation for Class 5 Hitch to Fit 1995 Ford F350 with 34 Inch Frame and Flat Dump Bed
  • Based on the size of your frame, it sounds as though your 1995 Ford F350 is the Cab and Chassis style. Curt offers a Class IV Receiver Hitch, # C14082, that with bolt directly to your vehicle's frame with no welding required. This hitch has a 1000 pound tongue weight capacity and 10000 pound towing capacity. We do not offer a custom Class V hitch for your truck but universal Class V hitch receivers are available. Curt offers the Universal Weld-On Receiver, # 15901, with 3 inch drop and...
    view full answer...

  • Parts Needed to Tow 1974 Ford Bronco with 1995 Bronco That Has No Hitch or Trailer Wiring
  • If you are thinking of flat-towing, an electric trailer brake controller like the Tekonsha Prodigy P2 # 90885 cannot be used for your application since your towed vehicle does not have electric brakes. Also, another complication is that we do not offer any tow bar base plates for the 1974 Ford Bronco; you would have to have base plates custom fabricated, which could be potentially very costly. I have linked an article that provides a lot of important information on the requirements for...
    view full answer...

  • What are the Hole Spacing Measurements on the Curt Trailer Hitch # 14090
  • I spoke with my contact at Curt and I got the measurements between the bolt holes for you. I made a picture that shows the following dimensions: Side to side on center the holes are 40 inches apart. From the hole closes to the receiver to the next hole it is 3-3/4 inches. From the second hole to the first rear most hole it is 11-1/4 inches. And the two rear most holes are 1 inch apart. This hitch is designed to fit Chevy and GMC full size vans. I have included a link to the...
    view full answer...

  • Recommended Transmission Cooler For 1995 Ford F250 With 7.3L Diesel Powerstroke Engine
  • The Derale Transmission Cooler, part # D13614 is designed to work with your 1995 F-250 with the 7,3L diesel. Since you said you have a small cooler already I recommend running the fluid through the cooler you have and then through the # D13614, and then through the radiator. This would be the optimal way to cool your fluid. To make it much easier to install the hoses it is recommended to use part # D13024 if you have 1/2-inch-20 threads. If you have 1/4 or 3/8 inch NPT-trans-line...
    view full answer...

  • Recommended Air Bags to Keep a 1995 Ford F-250 Level While Towing
  • The air bags that I recommend for you to use on your 1995 Ford F250 is the Firestone Ride-Rite Air Helper Springs # F2071. These are double convoluted which makes them more durable than many other brands. They have a weight capacity of 4,800 lbs but keep in mind that this does not increase the weight capacity of your F-250. I also recommend using the Firestone Air Command I # F2158 which allows you to adjust the air pressure of your air bags from inside your cab. This is also a great...
    view full answer...





^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.