bing tracking image

2002 Ford F-250 and F-350 Super Duty Installation And Review Videos

  

Best 2002 Ford F-250 and F-350 Super Duty Suspension Enhancement Options- Video

Best 2002 Ford F-250 and F-350 Super Duty Suspension Enhancement Options

Speaker 1: Today we're going to be taking a look at the best suspension enhancements for your 2002 Ford F-150, F-250, and F-350. Here we're going to have a leaf spring-style helper spring, followed by our air bag helper springs. Then over here we're going to have a jounce-style helper spring. This is going to be our lower overload helper spring. Then finally on the end, this is going to be our upper overload helper springs.Now each one of our types of suspension enhancements are going to do the same thing. When we're carrying a heavy load or hauling a heavy trailer, they're going to prevent the back end of our truck from sagging, causing more strain on our suspension, as well as lifting up the front end, creating less contact for our tires and not a safe driving condition. more


Watch Video

7/26/2017 10:24:11 AM



Front Mount Trailer Hitch Installation - 2002 Ford F-250 - Curt- Video

Front Mount Trailer Hitch Installation - 2002 Ford F-250 - Curt

Today on this 2002 Ford F250 Super Duty Crew Cab, we're going to install Part Number C31014. It's the Curt Front Mount Trailer Hitch Receiver. This is what our front mount hitch looks like on our truck once it's installed. Next we'll give you some measurements to help you in selecting some accessories for your front mount hitch, like a snow plow or a winch mount for your front hitch. From the center of the hitch pin hole in this case to the outside edge of the bumper, which would be the license plate bracket will be about 7 and a half inches. From the top of the receiver opening down to the ground will be about 13 and a quarter inches. more


Watch Video

1/23/2015 2:31:00 PM



Firestone Ride-Rite Air Helper Springs Installation - 2002 Ford F-250- Video

Firestone Ride-Rite Air Helper Springs Installation - 2002 Ford F-250

Today on our 2002 Ford F250, we're going to be installing the Firestone Ride-Right Air Helper Springs, part number F2550. Now we've gone ahead and added a water tank to our truck. This will help simulate the truck being loaded down. Now we'll go ahead and take it out on our test course to show you how the truck reacts with the factory suspension. You'll notice how much movement and sway the body of the vehicle has as we're on our test course. Now we'll go ahead and take our vehicle out on our test course again. more


Watch Video

7/24/2014 2:39:24 PM



Trailer Brake Controller Installation - 2002 Ford F350- Video

Trailer Brake Controller Installation - 2002 Ford F350

Today, on our 2002 Ford F350, we're going to be installing Tekonsha Prodigy P2 Trailer Brake Controller, Part Number 90885. In conjunction with the brake controller, we'll also be using the Tekonsha Plug-in Wiring Adapter for electric brake controllers, Part Number 3035-P.To begin with, we will go ahead and lower dash panel below the steering wheel by twisting the four corners of the panel and pulling it off. With this removed, we'll go ahead and locate the plug that we will need to plug into underneath the dash.The connector is a gray connector and we will need to take the end of the plug-in wiring adapter and plug into this. You want to make sure it goes in all the way to where you hear it click and lock into place.Next, we'll go ahead and pick out a location to secure our mounting bracket. On this particular vehicle, there was already a brake controller installed before, but we'll go ahead and change out to the new bracket.We'll go ahead and make the connection to the back of the brake controller. Again, you'll notice that there is a clip on the one side and you need to make sure that it's locked into place firmly on the back of the brake controller.We'll go ahead and use the two screws and put the brake controller up into the bracket. more


Watch Video

5/24/2013 10:45:14 AM



Fifth Wheel Installation - 2002 Ford F-250- Video

Fifth Wheel Installation - 2002 Ford F-250

Today on our 2002 Ford Super Duty, well be installing the Reese Quick Install Custom Base Rails and Install Kit for Fifth Wheel Trailer Hitches, part number RP50082-58 in conjunction with the Reese Fifth Wheel Trailer Hitch Square Tube Slider Dual-Jaw, part number RP30051. The first step of our install is taking the rear base rail and setting it up in our truck bed. Using the measurements provided in our install kit, well go ahead and measure it out from the end of the truck bed. Note: this does not include the tailgate. Then well measure from side to side to make sure the base rail is even. The best recommendation is to go off the weld seam of the truck bed. more


Watch Video

3/25/2013 3:15:50 PM



Firestone Level Command Compressor Installation - 2002 Ford F-250- Video

Firestone Level Command Compressor Installation - 2002 Ford F-250

Today, on our 2002 Ford F-250, we're going to install part number F2097 from Firestone. This is Firestone's Level Command Single-Gauge with a Heavy-Duty Compressor. First thing we're going to do is go ahead and find the location for our control panel. On this install, we're going to mount it on the center of the dash down towards the bottom. We'll hold the control panel up, and we'll use a couple of sheet metal screws to make some holes in the bottom of the dashboard. That'll be our place where we're going to mount it. more


Watch Video

3/25/2013 6:39:26 AM



Trailer Brake Controller Installation - 2002 Ford F-350- Video

Trailer Brake Controller Installation - 2002 Ford F-350

Today on our 2002 Ford F350 well be installing the Tekonsha Prodigy P3 brake controller, part number 90195-3035P in conjunction with our Hopkins seven and four pole vehicle connection point, part number 37185. Our first step will be mounting our Hopkins seven and four pole bracket to our seven and four pole plug. Using the hardware provided with our install kit we can go ahead and insert the screws and secure it with the nuts. Next well move to the vehicle, then we can take a grinder or a cutoff wheel and remove the bracket for the old connector. Then we can go ahead and take our side cutters, cutting zip ties or wires leading up to the connector. Then we can go ahead and cut it off and strip back the wires. more


Watch Video

2/22/2013 10:10:18 AM



MagnaFlow Exhaust Installation - 2002 Ford F-350 Super Duty- Video

MagnaFlow Exhaust Installation - 2002 Ford F-350 Super Duty

Install-exhaust-2002-ford-f350-mf15979 Today, were working on the 2002 Ford F350 Super Duty. Were going to install the MagnaFlow performance exhaust part number MF15979. Before we can install our new exhaust we have to remove the old exhaust, so Im going to take a little spray lubricant, spray each one of the rubber hangers, make it a little easier to remove and reinstall later. We also see there some exhaust clamps that were going to need to be removed. Were going to thoroughly spay these down with some penetrating oil to make it a little easier to break them free and get them loose. Alright start removing the exhaust; were going to come up here to the turbo underneath the hood. more


Watch Video

12/19/2011 4:30:30 PM



AFE Direct Fit Cold Air Intake System Installation - 2002 Ford F-350 Super Duty- Video

AFE Direct Fit Cold Air Intake System Installation - 2002 Ford F-350 Super Duty

Today on this 2002 Ford F-350 Super Duty, were going to install the AFE Direct Fit Cold Air system part number AFE51-10192. Our first step is going to be removing the negative battery cable on both sides. This particular application has two batteries. Im going to start with the passenger side. With the passenger side down well move over to the drivers side and repeat the same process. Now were going to go ahead and remove the cold air intake holes that connect to the air cleaner box. more


Watch Video

12/15/2011 8:10:41 AM



Timbren Rear Suspension Enhancement System Installation - 2002 Ford F-250 Super Duty- Video

Timbren Rear Suspension Enhancement System Installation - 2002 Ford F-250 Super Duty

Today on this 2002 F-250 Super Duty we are going to install part number TFR250SDE from Timbren. This is our Suspension Enhancement System. The first thing we did was remove the spare tire. Then we took off the tire on the side we are going to work on. You do not have to do that, we are doing it to make the instructions a little more clear. One thing you need to do is raise the frame off the suspension so you have plenty of room to work. :28 more


Watch Video

8/20/2010 6:40:25 AM



Fifth Wheel Hitch Installation - 2002 Ford F-250- Video

Fifth Wheel Hitch Installation - 2002 Ford F-250

Today on this 2002 Ford F-250 we are going to install part number RP30035 from Reese. For the first part of the install we need to locate the rear base rail for the fifth wheel hitch. Our measurement is going to start at the very end of the bed itself, not the tailgate, the end and we are going to measure up as described in the instructions. And then we will go ahead and make our mark. We will do that on both sides so we can make our rails even. :25 more


Watch Video

8/18/2010 1:41:24 AM



Fifth Wheel and Gooseneck Wiring Harness Installation - 2002 Ford F-250- Video

Fifth Wheel and Gooseneck Wiring Harness Installation - 2002 Ford F-250

Today on this 2002 Ford F-250 we are going to install part number 20110 from Tow Ready. This is Tow Readys fifth wheel or gooseneck 7 way tow harness. Basically what this does is act as an extension of your factory 7 way that is at the bumper of the vehicle, gets routed up underneath the vehicle to the side of the bed of the truck. This part is the 7-pole itself, it gets installed on the side of the bed. We are going to start off by making our hole in the side of the bed. :24 more


Watch Video

8/12/2010 12:40:58 AM



  1