bing tracking image

Chevrolet Silverado 2500 Trailer Hitch Ball Installation And Review Videos

     

Convert-A-Ball Interchangeable Ball Set Review - 2014 Chevrolet Silverado 2500- Video

Convert-A-Ball Interchangeable Ball Set Review - 2014 Chevrolet Silverado 2500

Today on our 2014 Chevrolet Silverado 2500, we are going to be installing the convert a ball interchangeable ball set part number 904B. Now in order to install this convert a ball system on this particular ball mount, we are going to need to use a hitch ball bushing that goes from an inch and a quarter opening down to a one inch. As our ball mount has an inch and a quarter opening on it and a shank on our convert a ball is only a one inch. We'll be using the hitch ball bushing inch and a quarter to one inch part number F-2. We'll begin by first sliding our bushing over the shank of our ball. With that into position, we can slide it to the hole on the ball mount, put that into position like that, we'll slide our lock washer on followed by our hex nut. We'll then and go ahead and take our impact gun and tighten down the nut. more


Watch Video

4/10/2014 2:30:36 PM



Convert-A-Ball Interchangeable Ball Set Installation - 2014 Chevrolet Silverado 2500- Video

Convert-A-Ball Interchangeable Ball Set Installation - 2014 Chevrolet Silverado 2500

Today on our 2014 Chevrolet Silverado 2500, we're going to be installing the Convert-A-Ball Interchangeable Ball Set, part # 900B. Now In order to install this Convert-A-Ball system on this particular ball mount, we're going to need to use a Hitch Ball Bushing that goes from an 1 1/4 inch opening down to a 1 inch because our ball mount has a 1 1/4 inch opening on it, and the shank on our Convert-A-Ball is only a 1 inch, so we'll be using the Hitch Ball Bushing 1 1/4 inch to 1 inch, part # F-2. We'll begin by first sliding our bushing over the shank of our ball. With that into position, we can slide it through the hole in a ball mount. With that into position like that, we'll slide our lock washer on, followed by our hex nut. We'll then go ahead and take our impact gun and tighten down the nut. Now when tightening down the nut, it's helpful if you take a large Phillips head screwdriver and slide it through the hole and the ball shank. This will help it from spinning. more


Watch Video

4/8/2014 8:54:53 AM



  1