Volkswagen Accessories and Parts Installation And Review Videos

  

Yakima Roof Rack Fairing Review - 2013 Volkswagen Jetta- Video

Yakima Roof Rack Fairing Review - 2013 Volkswagen Jetta

Today on our 2013 Volkswagen Jetta we will be test fitting the 44-inch fairing for the Yakima Rooftop Crossbars, part #Y07048. To begin our test fit, we will place our fairing on the roof of our vehicle. We will fit the clips around the bar being sure that our fairing is centered. Once we're sure our fairing is centered, we will secure the clip at both ends with a bolt and a wing nut. With everything tight and secure, that will complete our test fit for the Yakima 44-inch fairing, part #Y07048 on our 2013 Volkswagen Jetta. . more


Watch Video

1/31/2014 10:00:13 AM



Yakima Roof Rack Fairing Review - 2013 Volkswagen Passat- Video

Yakima Roof Rack Fairing Review - 2013 Volkswagen Passat

Today on our 2013 Volkswagen Passat, well be test fitting the Yakima Fairing for Yakima Roof Rack Cross Bars, part number y07048. Now with our roof rack and cross bars already assembled, well take the fairing and set it onto the front cross bar getting it as centered as possible to ensure the most aerodynamic fit. Well then use the included bolt and wing nut to secure the fairing to the cross bars on the two outside holes of the fairing. And that completes todays test fit for the 44-inch fairing by Yakima for Yakima Roof Rack Cross Bars, part number y07048, on our 2013 Volkswagen Passat. more


Watch Video

2/25/2013 10:07:20 AM



Yakima Roof Rack Fairing Review - 2012 Volkswagen Passat- Video

Yakima Roof Rack Fairing Review - 2012 Volkswagen Passat

Today we're working with a 2012 Volkswagen Passat and we're going to be test fittingthe Yakima 44" Fairing, part number Y07048. Now, we've already got our fairing put together and we're ready to mount it up on ourcrossbar. We'll take the four clips and fit them around our front crossbar. We do wantto make sure that the fairing is centered between the Q Towers. Once we've done that,we go back and insert our carriage bolts into the two clips at the end and tighten themdown with a wing nut. And with that our fairing's installed and we're ready to hit theroad. more


Watch Video

9/18/2012 7:21:28 AM



Yakima Roof Rack Fairing Review - 2000 Volkswagen Beetle- Video

Yakima Roof Rack Fairing Review - 2000 Volkswagen Beetle

Today on our 2000 Volkswagen Beetle, we'll be installing the 44" fairing for Yakima roof rack crossbars. Now, to begin our installation, all we need to do is put the fork hooks around the front crossbar. At the outer hooks, we'll put the carriage bolt through and tighten it down with the wing nut. With that done, our fairing is secured to the crossbars and our roof rack system is a little quieter. And that completes our test fit of part number Y070048, the 44" fairing for Yakima roof rack crossbars, on our 2000 Volkswagen Beetle. more


Watch Video

6/6/2012 1:12:45 PM



Yakima Roof Rack Fairing Review - 2012 Volkswagen Tiguan- Video

Yakima Roof Rack Fairing Review - 2012 Volkswagen Tiguan

Today on this 2012 Volkswagen Tiguan well be test fitting the Yakima 44-inch Fairing part number Y07048. To mount the frame to the front crossbar, well fit all four clips around our bar. Well make sure that the Fairing is centered from left to right and is seated properly against the roof. Once weve done that, we can take our carriage bolts and wing nuts and use them to tighten down the outermost clips on either side of the Fairing. And just like that, our fairings installed and were ready to get on our way. That does it for our test fit of the Yakima 44-inch Fairing part number Y07048 on our 2012 Volkswagen Tiguan.. more


Watch Video

5/4/2012 6:02:56 PM



Putco Heavy-Duty Harness and Relay Installation - 2001 Volkswagen Jetta- Video

Putco Heavy-Duty Harness and Relay Installation - 2001 Volkswagen Jetta

more


Watch Video

5/4/2012 3:56:01 PM



Yakima Roof Rack Fairing Review - 2012 Volkswagen Jetta- Video

Yakima Roof Rack Fairing Review - 2012 Volkswagen Jetta

Today we have a 2012 Volkswagen Jetta and we'll be test fitting the Yakima 44" Fairing for the Yakima Round Bar Roof Racks, part number Y07048. To attach the fairing we'll fit the clips around our round crossbar. We'll make sure we position our fairing evenly from left to right. Once we've done that we'll take our carriage bolts and wing nuts and feed them to the clips on the end and then tighten them down. And with that our roof fairing is installed and we're ready to hit the road. That does it for our test fit of Yakima's 44" Fairing for their Round Bar Roof Racks, part number Y07048 on a 2012 Volkswagen Jetta.. more


Watch Video

3/29/2012 10:37:54 AM



Replacement Tail Light Light Bulb Installation - 2005 Volkswagen Jetta- Video

Replacement Tail Light Light Bulb Installation - 2005 Volkswagen Jetta

Today on this 2005 Volkswagen Jetta we are going to be replacing a burnt out tail light bulb using part number A1156B from Optronics. To access the tail light assembly we will need to pull back the covering and we can access the tail light assembly back here. Before we start disconnecting any wires we are going to go up to the front and pop the hood and disconnect the battery. To remove the tail light assembly what we need to do is disconnect the top harness and lift up the two tabs on the bottom and the whole assembly will slide out. To remove the bulb push it down and rotate it counter clockwise and it will pop out. Next take the replacement bulb and it into the fixture. With the new bulb in place all we have to do is remount the fixture and connect the battery. We have reinstalled the trunk lining and reconnected the battery. Now all we have left to do is test it out. There you have it for the 1156 replacement light bulb from Optronics. more


Watch Video

11/29/2010 2:39:37 PM



Trailer Wiring Harness Installation - 2008 Volkswagen Jetta- Video

Trailer Wiring Harness Installation - 2008 Volkswagen Jetta

Today on this 2008 Volkswagen Jetta we are going to install part number 119176 from Tow Ready. This is a wire harness that is hard wired into the vehicle and has a lead that is run up to the battery, so it does get powered by the vehicles battery itself. So first things first, go ahead and open up the trunk. First step involved, go ahead and take out the bottom panel and the threshold here. There are two screws I have to take out of the bottom of this. Now that we have all the interior paneling off we can see all the wiring in its entirety. You can see where some wires go up to the drivers side tail light, and also you can see wires go to the passenger side tail light. :52 more


Watch Video

12/21/2009 10:08:23 AM



  1