Jeep Throttle Body Spacer Installation And Review Videos

  

Airaid EconoAid Throttle Body Booster Installation - 2012 Jeep Grand Cherokee- Video

Airaid EconoAid Throttle Body Booster Installation - 2012 Jeep Grand Cherokee

Today on our 2012 Jeep Grand Cherokee, we'll be installing the AirAid EconoAid throttle body booster part number AR1022. To begin with, we'll need to go ahead and raise the hood of the vehicle. Then, we'll need to remove this plastic cover that covers the top part of the engine. You just simply lift up on it and the tabs that hold it in place will release. We can go ahead and set that aside for now. Now we can see here, we're going to need to loosen up two hose clamps. We'll begin here at the air box side where we'll loosen up the hose clamp enough, so we can slide the boot off the air intake box. more


Watch Video

7/22/2014 3:31:35 PM



Airaid PowerAid Custom Throttle Body Spacer Installation - 2012 Jeep Grand Cherokee- Video

Airaid PowerAid Custom Throttle Body Spacer Installation - 2012 Jeep Grand Cherokee

All right, today on this 2012 Jeep Grand Cherokee we're going to install part number AR300-637 from Airaid. This is a PowerAid throttle body spacer. OK, first thing we need to do is go ahead and lift up on the engine cover and move it out of the way. It simply just pops up. Next we need to disconnect the air temperature sensor from the air intake, it's just forward of the throttle body, on the passenger side. Then next, we'll go ahead and loosen the clamp on the intake tube going toward the throttle body. We'll pull up on the center of the intake tube and pop it loose. more


Watch Video

2/17/2014 9:10:40 AM



  1