Hyundai Accessories and Parts Installation And Review Videos

  

Roadmaster Single Park Light Diode Installation - 2016 Hyundai Elantra- Video

Roadmaster Single Park Light Diode Installation - 2016 Hyundai Elantra

Today we're going to be taking a look at a great use for the Roadmaster Park Light Diode. This is part number RM-690. We're working on a Hyundai Elantra today. This vehicle requires that the key be in accessory mode while it's being dinghy towed. What that means is some of the accessories are going to be on and they're going to be draining the battery. What we're going to be able to do is tap into our running light wire coming from our motor home. When the park lights are turned on, that sends power through the wire back to the lights in the car. We're going to use our diode to access that power so that wire will not only send the power back to the lights in the back. more


Watch Video

12/10/2015 3:32:20 PM



Universal Kit for a Trailer Brake Controller Installation - 2012 Hyundai Santa Fe- Video

Universal Kit for a Trailer Brake Controller Installation - 2012 Hyundai Santa Fe

Today on our 2012 Hyundai Santa Fe we'll be installing an ETBC7 Brake Controller Kit, part number ETBC7. We will also be using the Tow Ready Universal Mounting Bracket, part number 18140. Let's go ahead and start by attaching the new 7-pole bracket to the 7-pole using the hardware supplied with our install kit. Then, we can go ahead and take the Tow Ready Universal Mounting Bracket and attach it to the 7-pole bracket. Next, we'll go ahead and mount the 7-pole and bracket to the hitch using the clamp provided with the Universal Mounting Bracket. With the bracket secured to the hitch, we can go ahead and connect to the 4-pole wire already on the vehicle to the 4-pole wire coming from the 7-pole bracket. more


Watch Video

3/6/2015 11:59:46 AM



Yakima Accessories and Parts Review - 2013 Hyundai Santa Fe- Video

Yakima  Accessories and Parts Review - 2013 Hyundai Santa Fe

Today on our 2013 Hyundai Santa Fe, we are going to be test fitting the 38 inch fairing Yakima roof rack system. It's part number is Y07047. Now I've already removed the carriage bolt and wing nut from the clamp on the end here. Let me show you what I mean, you'll have two of these, you are going to have one on each of the end clamps. I'm just going to remove the large black wing nut and slide out the carriage bolt. We are going to stick this on our pocket, we'll use them here in a little while. more


Watch Video

8/22/2014 12:03:04 PM



Trailer Wiring Harness Installation - 2013 Hyundai Santa Fe- Video

Trailer Wiring Harness Installation - 2013 Hyundai Santa Fe

Today, on our 2013 Hyundai Santa Fe, we'll be installing a Curt wiring harness, with a four pole flat connector, part number C56151. We went ahead and removed the spare tire just to make the installation of our wiring harness easier. Our vehicle is equipped with a factory tow package. The connections will be on the driver's side of the vehicle and are those two plugs right there. We'll need to remove the caps off of the plugs. To do so, you just press in on the little tabs and slide them rearward. more


Watch Video

8/13/2014 2:51:30 AM



Curt Easy Mount Trailer Wiring Bracket Installation - 2005 Hyundai Tucson- Video

Curt Easy Mount Trailer Wiring Bracket Installation - 2005 Hyundai Tucson

Today, on our 2005 Hyundai Tucson, we're going to do an install on part number C58000. This is the Curt Easy Mount Bracket for 4 or 5 way flat connectors and 6 or 7 way trailer connectors. Now, we'll start off our test fit by placing the bracket and put it on the end of the hitch itself. Then, the hardware will go behind the collar of the hitch. Now, we'll go ahead and install the lock nuts. Then, we'll snug them down. more


Watch Video

7/1/2014 8:20:39 AM



Trailer Brake Controller Installation - 2014 Hyundai Santa Fe- Video

Trailer Brake Controller Installation - 2014 Hyundai Santa Fe

All right, today, on this 2014 Hyundai Santa Fe Limited, we are going to install part number 90195. This is Tekonsha Prodigy p3 trailer brake controller. Now to help us with our install, we will also be using part number ETBC7. We are going to start off by making access from the inside to the outside. We will go ahead and drill a pilot hole first on the fire wall from the inside. We will drill a 1/4" pilot hole, now go ahead and use our hole saw, it doesn't really matter what size, just enough to get us some working room so we don't tear up the carpet as much. Now we will be using a step bit to enlarge our hole. We've got our hole drilled out, we will go ahead and mount our circuit breakers. more


Watch Video

3/19/2014 4:36:17 PM



Roadmaster Flexo-Coil Kit Installation - 2013 Hyundai Elantra- Video

Roadmaster Flexo-Coil Kit Installation - 2013 Hyundai Elantra

Today on our 2013 Hyundai Elantra we'll be installing the Roadmaster 7-wire to 6-wire Flexo-Coil Kit Part Number RM-146-7. We'll begin here on the front of our towed vehicle. You'll notice that there's already a 4 flat here as well as another indicator light wire as this vehicle has an InvisiBrake installed on it. The black wire sends the LED lights as well as an audible light up into the motorhome telling you that your breaks are working. We're going to actually install all 5 of these wires into the 6-way. Now onto the two vehicle of the motorhome vehicle in the 7-way. more


Watch Video

1/16/2014 1:30:05 PM



Yakima Roof Rack Fairing Review - 2013 Hyundai Sonata- Video

Yakima Roof Rack Fairing Review - 2013 Hyundai Sonata

Today on our 2013 Hyundai Sonata we'll be test fitting the 44 inch fairing for Yakima roof rack cross bars, part number Y07048. With a Yakima round bar system installed on our vehicle we'll begin our test fit by taking our fairing and matching it up with our front cross bar. Here on the passenger side we'll go ahead and fit the inside clamp around our cross bar. We'll undo the wing nut and remove the bolt on the outside clamp. We'll fit it around our cross bar and then reinstall our bolt and tighten down with the wing nut. We can then repeat this same process for the other side. more


Watch Video

7/3/2013 2:22:01 PM



Yakima Roof Rack Fairing Review - 2013 Hyundai Accent- Video

Yakima Roof Rack Fairing Review - 2013 Hyundai Accent

Today on our 2013 Hyundai Accent were going to do a test fit of the Yakima Roof Rack Fairing part number Y07048. Our fairing has already been assembled according to the instructions, so all we have to do is install on the front load bar. To install the fairing to the load bar be sure to secure it by placing the clips around the load bar and clipping them in place. The two clips on the end youll have to tighten with the provided wing nut to make sure that theyre secured to the front load bar. Once everything is secure the installation of your fairing is complete. That concludes our test fit for part number Y07048 from Yakima on our 2013 Hyundai Accent.. more


Watch Video

6/11/2013 11:23:44 AM



Yakima Roof Rack Fairing Review - 2013 Hyundai Elantra- Video

Yakima Roof Rack Fairing Review - 2013 Hyundai Elantra

Today, on our 2013 Hyundai Elantra, well be test fitting the 44-inch Fairing for Yakima Roof Rack Crossbars, Part Number Y07048. Now, to begin our test fit, well first undo the black wing nut at the end of the fairing to bring the brackets around the front crossbar. Well then re-insert the allen bolt and thread on our wing nut to secure one side of the fairing to the crossbar.Well then push on the other brackets and then go over to the other side of the vehicle, where we will again loosen up the black wing nut and remove the bolt, set the bracket on the crossbar, and then secure it again with the bolt and wing nut. And that completes todays test fit for the 44-inch Fairing for Yakima Roof Rack Crossbars, Part Number Y07048 on our 2013 Hyundai Elantra. more


Watch Video

5/29/2013 4:10:13 PM



Yakima Roof Rack Fairing Review - 2011 Hyundai Accent- Video

Yakima Roof Rack Fairing Review - 2011 Hyundai Accent

Today on our 2011 Hyundai Accent, we'll be test fitting the 44-inch Fairing for Yakima Roof Rack Crossbars, part number Y07048. With our vehicle equipped with the Yakima crossbars, we'll simply slide the fairing over the front crossbar using the four hooks included with the fairing. We can then secure it at the two outer hooks with our wing nuts. With the two wing nuts secured, our fairing is secured to the vehicle and ready to deflect wind. That completes our test fit of the 44-inch Fairing for Yakima Roof Rack Crossbars, part number Y07048, on our 2011 Hyundai Accent. more


Watch Video

3/16/2012 2:07:17 PM



Westin Tube Step Installation - 2011 Hyundai Santa Fe- Video

Westin Tube Step Installation - 2011 Hyundai Santa Fe

Today on this 2011 Hyundai Santa Fe, were using tube steps part number 22-5050 and Installation Kit 22-1815.Were gonna start by laying all the parts because the brackets have a front and rear to them. So, front bracket, a tube step and our rear bracket. Next we need to do in the vehicle. Right next to the rear wheel, theres a rubber plug, well just pop it out of the way. Were working on the passenger side of the vehicle. Now, on the frame rail theres an oval plug that we have to remove as well. more


Watch Video

1/11/2012 3:20:45 PM



  1