Chevrolet Trailer Hitch Ball Mount Installation And Review Videos

  

B and W Tow and Stow 3-Ball Mount Installation - 2017 Chevrolet Silverado 2500- Video

B and W Tow and Stow 3-Ball Mount Installation - 2017 Chevrolet Silverado 2500

Hello everybody, Clayton here at etrailer.com, and today, we're gonna be taking a look at the B&W Tow & Stow three-ball ball mount on our 2017 Chevy Silverado 2500. This ball mount is available in chrome as you see here, and also black for the 2 1/2-inch receiver tube opening, and you're gonna be able to find these same options in two-inch receiver tube openings as well, being the black and the chrome. And as far as our weight capacities are concerned with our 2 1/2-inch hitch here, we are gonna be at 14,500-pound towing capacity and a 1,450-pound tongue weight rating. And in the two-inch hitch, you are gonna have a 10,000-pound towing capacity and a 1,000-pound tongue weight rating. Now you do wanna keep in mind, you need to check with your owner's manual and make sure that your vehicle is capable at towing at those capacities. Our hitch is gonna offer us a seven-inch drop or a 7 1/2-inch rise. more


Watch Video

4/1/2021 4:30:15 PM



MaxxTow Adjustable 2 Ball Mount Review - 2015 Chevrolet Colorado- Video

MaxxTow Adjustable 2 Ball Mount Review - 2015 Chevrolet Colorado

Kevin: Today on our 2015 Chevrolet Colorado we're doing a test on the Max Tow Quick Adjust Combo Hitch. This is going to be a 2" and a 2-5/16" ball. Part number is MT70380. With our inch and quarter adjustability, this is going to allow us to fit a wide variety of coupler parts using just 1 product. You'll see our dual pins here, these are going to offer stabilization for the ball as it heads down the road. It's got a black power coat finish on the shank itself and we've got harden chrome plated balls to make our connections with. Now adjusting our balls is very quick. All we'll do is pull out our 2 clips that are holding our pins in place. more


Watch Video

3/9/2016 9:56:06 AM



B&W Tow and Stow 3 Ball Mount Installation - 2014 Chevrolet Silverado 1500- Video

B&W Tow and Stow 3 Ball Mount Installation - 2014 Chevrolet Silverado 1500

Today the 2014 Chevrolet Silverado 1500 we're going to show you B&W Tow and Stow Three Ball Mount. Part number BWTS10050B. One of the best features of our ball mount here is that you can store it underneath your truck. To store it, we'll go ahead and flip it over one more time because you have to do this in a drop position. Now go ahead and remove our pins one more time. We're going to actually take this and rotate it sideways just to get a better view of everything. Let's go ahead and pull our hitch pin clips. more


Watch Video

5/6/2015 11:12:09 AM



B&W Tow and Stow 3 Ball Mount Installation - 2014 Chevrolet Silverado 1500- Video

B&W Tow and Stow 3 Ball Mount Installation - 2014 Chevrolet Silverado 1500

We're going to show you the BMW Tow & Stow 3-Ball Mount, part number BWTS10049B. Now even though a ball mount is rated for a total weight of 10,000 pounds, always check to make sure your vehicle can handle the weight that you want to pull. Also you don't want to go over the weight capacities of the hitch balls individually. The biggest feature about this is that when you're done using it if you're in the habit of leaving your ball mount on the truck, you can actually take this whole assembly and flip it around and store it underneath the hitch if you had the room. Once again we'll go ahead and remove our 2 pins here, and by the way, they're stainless steel, so they'll stay corrosion free for a very long time. We'll go ahead and pull out our pins. This also has a pin in it on both sides and it hits the stop right here, so it can't completely come all the way off. Then you just swing it back up and reinstall your pins. more


Watch Video

4/27/2015 2:52:37 PM



Andersen EZ Heavy Duty Adjustable Hitch Installation - 2008 Chevrolet Silverado- Video

Andersen EZ Heavy Duty Adjustable Hitch Installation - 2008 Chevrolet Silverado

Today on our 2008 Chevrolet Silverado 2500 with 4 inch lift kit we're going to do a review and install of the Andersen Hitches EZ Heavy Duty Adjustable Hitch with Combo Ball part number AM3298. Here we have our nice heavy duty solid portion of the shank with the black powder coating. This is a 2 inch by 2 inch shank. It will fit your standard class 3 and 4 inch hitches that have a 2 inch by 2 inch opening or in this case where you have a 2 1/2 by 2 1/2 inch opening and inside is a sleeve. It will also work with these applications. We'll simply slide the shank into the sleeve then aligning the shank and sleeve up with the hitch pre drilled hole so that we can reinstall our pin and clip. Here we have our combination ball. more


Watch Video

4/14/2015 11:06:04 AM



MaxxTow Adjustable-Height Ball Mount Review - 2014 Chevrolet Tahoe- Video

MaxxTow Adjustable-Height Ball Mount Review - 2014 Chevrolet Tahoe

Today on our 2014 Chevy Tahoe, well be test fitting the Maxxtow Adjustable-Height Ball Mount for 2 inch hitches, part number MT70067. Before we begin our test fit, well first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. Well get a measurement of about 24-1/4 inches. Keep in mind this measurement may vary due to tire size, hitch style or aftermarket accessories. Well now begin our test fit in the drop position by sliding the shank of the ball mount into the opening of the hitch. more


Watch Video

6/19/2014 4:04:42 PM



Curt Tri-Ball Mount Review - 2014 Chevrolet Tahoe- Video

Curt Tri-Ball Mount Review - 2014 Chevrolet Tahoe

Today, on our 2014 Chevy Tahoe, we'll be test fitting the Curt Tri Ball Mount for 2 inch hitches, part number C45001. Before we begin our test fit, we'll need to first obtain the hitch height of our vehicle. The hitch height for this vehicle is about 24 1/4 inches. Keep in mind, this measurement may vary due to tire size, hitch style or added market accessories. Now, we'll begin our test fit by sliding the shank of the ball mount into the opening of the hitch. We'll then line up the pin holes and then secure it with a pin and clip. Now, because this ball mount has no drop or rise, if your trailer's ride height matches your vehicle's hitch height, this ball mount would be appropriate for you. more


Watch Video

6/19/2014 4:04:05 PM



Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2014 Chevrolet Tahoe- Video

Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2014 Chevrolet Tahoe

Today on our 2014 Chevy Tahoe we'll be test fitting the Convert-A-Ball cushioned ball mount for 2" hitches, part number AMSC2. Before we begin our test fit we'll first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside of top of the receiver tube. We'll get a measurement of about 24-1/4". Keep in mind this measurement may vary due to tire size, hitch style, or aftermarket accessories. We'll begin our test fit in the drop position by sliding the shank of the ball mount into the opening of the hitch. After lining up the pin holes, we'll then secure it with the pin and clip. more


Watch Video

6/19/2014 4:03:53 PM



Andersen Rapid Hitch Ball Mount Review - 2014 Chevrolet Suburban- Video

Andersen Rapid Hitch Ball Mount Review - 2014 Chevrolet Suburban

Today on our 2014 Chevy Suburban we will be test fitting the Rapid Hitch adjustable aluminum ball mount kit with 2 chrome balls, part #AM3410. Before we begin our test fit, we're just going to get the hitch height of our Suburban. The hitch height is the measurement from the ground to the inside top of the receiver tube. We get a hitch height of about 24 1/2 inches. Keep in mind this measurement may vary due to tire size, hitch style or after market accessories. We will now begin our test fit by sliding the shank of the ball mount into the opening of the hitch. We will then line up the pin holes, insert the pin through the pin holes and then secure it with the clip on the other side. With the ball platform as high as it can go, we will measure from the ground to the top of the platform. more


Watch Video

6/16/2014 8:37:38 AM



Curt Tri-Ball Mount Review - 2014 Chevrolet Suburban- Video

Curt Tri-Ball Mount Review - 2014 Chevrolet Suburban

Today on our 2014 Chevy Suburban we'll be test fitting to CURT tri-ball mount for 2" hitches, part number C45001. We'll begin our test fit by first sliding the shank of the ball mount into the opening of the hitch. After lining up to pinholes we'll insert our pin through the pinholes and secure it with the clip on the other side. With the ball in this position we have the 2-5/16" ball at the top. You can rotate it to the right to access the 2" ball or to the left to access the 1-7/8" ball. Since this ball mount has no drop or rise, if your trailer's ride height matches your vehicle's hitch height, this should be an appropriate ball mount for you. This ball mount allows you to haul different size boats or trailers without the need of any additional ball mounts. With our ball mount installed that will complete today's test fit of the CURT tri-ball mount, part number C45001, on our 2014 Chevy Suburban. more


Watch Video

6/16/2014 8:37:36 AM



MaxxTow Adjustable-Height Ball Mount Review - 2014 Chevrolet Suburban- Video

MaxxTow Adjustable-Height Ball Mount Review - 2014 Chevrolet Suburban

Today on our 2014 Chevy Suburban we'll be test fitting the Maxxtow Adjustable High Ball Mount for 2" Hitches, part number MT70067. This ball mount has a 10" strap with an 8" rise and is rated at 5,000 pounds. Before we begin our test fit we'll first need to get the hitch height of our Suburban. The hitch height is the measurement from the ground to the inside top of the receiver tube. We'll get a hitch height of about 24-1/2". Keep in mind this measurement may vary due to tire size, hitch style, or aftermarket accessories. We'll begin our test fit in the drop position by sliding the shank of the ball mount into the opening of the hitch. more


Watch Video

5/27/2014 10:07:22 AM



MaxxTow Ball Mount Review - 2014 Chevrolet Suburban- Video

MaxxTow Ball Mount Review - 2014 Chevrolet Suburban

Today, on our 2014 Chevy Suburban, we'll be test fitting the Maxxtow Ball Mount with a 2-inch accessory receiver for 2-inch hitches, with a 2-1/4 inch drop rated at 5,000 pounds, part number MT70066. Now, this ball mount allows you to haul a small boat or trailer while also carrying a 2-inch accessory. Before we begin our test fit, we're first going to get the hitch height of our Suburban. The hitch height is the measurement from the ground to the inside top of the receiver tube. We'll get a hitch height of about 24-1/2 inches. Keep in mind this measurement may vary due to tire size, hitch style, or after-market accessories. We'll begin our test fit by sliding the shank of the ball mount into the opening of the hitch. more


Watch Video

5/21/2014 9:13:21 AM



Draw-Tite Ball Mount Review - 2014 Chervolet Suburban- Video

Draw-Tite Ball Mount Review - 2014 Chervolet Suburban

Today on our 2014 Chevy Suburban, we'll be test fitting the Draw Tite ball mount with a three quarter inch rise or two inch drop rated at 7500 pounds part number 2923. Before we begin our test fit we'll first going to get the hitch height of our Suburban. The hitch height is the measurement from the ground to the inside top of the receiver tube. We'll get a hitch height of about twenty four and a half inches. Keep in mind this measurement may vary due to tire size, hitch style or market accessories. We'll now begin our test fit in the drop position by sliding the shank of the bike rack into the opening of the hitch. After lining up the pin holes we'll insert the pin to the pin holes and secure the clip in the other side. We'll then measure from the ground to the of the ball platform getting a measurement of about twenty two inches. We can then flip the ball mount over into the rise position, and again measure from the ground to the top of the ball platform getting a measurement of about twenty five inches. more


Watch Video

5/14/2014 11:46:33 AM



Diversi-Tech Adjustable Ball Mount Review - 2014 Chevrolet Suburban- Video

Diversi-Tech Adjustable Ball Mount Review - 2014 Chevrolet Suburban

Today on our 2014 Chevy Suburban, we'll be test fitting the Diversi Tech self locking adjustable aluminum ball mount rated at 10,000 pounds part number DTALBM6600. Before we begin our test fit we'll first going to get the hitch height of our Suburban. The hitch height is the measurement from the ground to the inside top of the receiver tube. We'll get a hitch height of about twenty four and a half inches. Keep in mind this measurement may vary due to tire size, hitch style or market accessories. We'll begin our test fit in the drop position by sliding the shank of the ball mount into the opening of the hitch. After lining up the pinholes we'll need to turn the key which will extend out the integrated hitch pin which will secure the ball mount into the hitch. We'll then take the key out and go over to the ball platform. more


Watch Video

5/14/2014 11:45:58 AM



Curt Multi-Ball Adjustable Ball Mount Review - 2014 Chevrolet Suburban- Video

Curt Multi-Ball Adjustable Ball Mount Review - 2014 Chevrolet Suburban

Today on our 2014 Chevy Suburban, we'll be test fitting the Curt Multi-ball Adjustable Ball Mount for 2-inch hitches, part number D900. We'll begin our test fit in the draw position by sliding the shank of the ball mount into the opening of the hitch. After lining up the pin holes, we'll insert our pin through the pin holes, and secure the clip on the other side. With the ball platform as low as it can go, we'll measure from the ground to the top of the ball platform, getting a measurement of about 19-1/2 inches. We can also remove the silver pin and rotate the ball platform to the left to access the two-inch ball, or to the right to access the 1-7/8-inch ball. Or keep it like this, where the 2-5/16-inch ball is on top. We can now remove the two silver pins on the downward portion of the ball mount, and raise the platform up as high as it can go. more


Watch Video

5/14/2014 11:45:24 AM



Convert-A-Ball 6-Way Multi-Hitch Ball Mount Review - 2014 Chevrolet Suburban- Video

Convert-A-Ball 6-Way Multi-Hitch Ball Mount Review - 2014 Chevrolet Suburban

Today on our 2014 Chevy Suburban, we'll be test fitting the Convert-A-Ball Cushioned six way multi-hitch ball mount for two inch hitches, rated at 10,000 pounds, part number CAB-6W. Before we begin our test fit, we're first going to get the hitch height of our Suburban. The hitch height is the measurement from the ground to the inside top of the receiver tube. We'll get a hitch height of about 24 1/2 inches. Keep in mind, this measurement may vary due to tire size, hitch style or after market accessories. We'll begin our test fit by sliding the shank of the ball mount into the opening of the hitch. more


Watch Video

5/12/2014 5:14:40 PM



Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2014 Chevrolet Suburban- Video

Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2014 Chevrolet Suburban

Today on our 2014 Chevy Suburban, we'll be test fitting a Convert-A-Ball Cushioned Ball Mount for two inch hitches with a 3/4 inch rise or two inch drop, rated at 10,000 pounds, part number AMSC2. Before we begin our test fit, we're first going to get the hitch height of our Suburban. The hitch height is the measurement from the ground to the inside top of the receiver tube. We'll get a hitch height of about 24 1/2 inches. Keep in mind, this measurement may vary due to tire size, hitch style or after market accessories. We'll begin our test fit in the drop position by sliding the shank of the ball mount into the opening of the hitch. more


Watch Video

5/12/2014 5:14:11 PM



Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2014 Chevrolet Suburban- Video

Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2014 Chevrolet Suburban

Today on our 2014 Chevy Suburban, well be test fitting the Convert-A-Ball Cushion Ball Mount for 2 inch hitches with a 1 inch rise or a 2 inch drop, rated at 14,000 pounds, part number AMSC2HD. Before we begin our test fit, well first going to get the hitch height of our Suburban. The hitch height is the measurement from the ground to the inside top of the receiver tube. Well get a hitch height of about 24-1/2 inches. Keep in mind this measurement may vary due to tire size, hitch style or aftermarket accessories. Well now begin our test in the drop position by sliding the shank of the ball mount into the opening of the hitch.After lining up the pin holes, well insert our pin through our pin holes and secure with the clip on the other side. more


Watch Video

5/12/2014 5:13:43 PM



Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2014 Chevrolet Suburban- Video

Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2014 Chevrolet Suburban

Today on our 2014 Chevy Suburban we'll be test fitting the Convert-A-Ball cushioned ball mount for 2" hitches, rated at 10,000 lbs., with a 6 3/4" rise or an 8" drop, part number AMSC8. Before we begin our test fit we're first going to get the hitch height of our Suburban. The hitch height is the measurement from the ground to the inside top of the receiver tube. We'll get a hitch height of about 24 1/2". Keep in mind this measurement may vary due to tire size, hitch style, or aftermarket accessories. We'll begin our test fit in the drop position by sliding the shank of the ball mount into the opening of the hitch. After lining up the pinholes we'll insert our pin through the pinholes and then secure it with the clip on the other side. more


Watch Video

5/12/2014 5:13:14 PM



Convert-A-Ball Dual-Cushioned Adjustable Ball Mount Review - 2014 Chevrolet Suburban- Video

Convert-A-Ball Dual-Cushioned Adjustable Ball Mount Review - 2014 Chevrolet Suburban

Today, on our 2014 Chevy Suburban, we'll be test fitting the convertible, dual cushioned, adjustable ball mount with a 7 inch riser, 9 inch drop rated at 5,000 pounds, part number CAB-UN. Before we begin our test fit, we'll first need to get the hitch height of our suburban. The hitch height is the measurement from the ground to the inside top of the receiver tube. We'll get a hitch height of about 24 and a half inches. Keep in mind this measurement may vary due to tire size, hitch style, or after-market accessories. We'll begin our test fit in the drop position by sliding the shank of the ball mount into the opening of the hitch. After lining up the pin holes, we'll insert our pin through our pin holes and then secure it with the clip on the other side. With the ball mount platform as high as it can go in the drop position, we'll measure from the ground to the top of the ball platform, getting a measurement of about 20 inches. more


Watch Video

5/12/2014 5:12:27 PM



Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2014 Chevrolet Tahoe- Video

Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2014 Chevrolet Tahoe

Today on our 2014 Chevy Tahoe, we'll be doing a quick test fit of the convertible, heavy duty cushion ball mount, Part Number AMSC2HD. Now, the first thing we need to do before we install our ball mount, is get the hitch height of our vehicle. Now, the hitch height is the measurement from the ground to the top inside edge of the receiver. And we have about 24 1/4 inches. Keep in mind this measure may vary due to tire size, hitch style or after market accessories. So, now what we can do is in the drop position, we'll slide the ball mount in, line up the pin holes. more


Watch Video

5/7/2014 11:08:53 AM



Draw-Tite Ball Mount Review - 2014 Chevrolet Tahoe- Video

Draw-Tite Ball Mount Review - 2014 Chevrolet Tahoe

Today on our 2014 Chevy Tahoe, we'll be doing a quick test fit of the Draw-Tite ball mount, part number 2923. Before we begin our test fit, we'll first need to get the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. The hitch height is about 24 and a quarter inches. Keep in mind this measurement may vary due to tire size, hitch style or after market accessories. We'll then go ahead, and in the drop position, we'll slide the shank of the ball mount in, line up the pin holes, and secure it with the pin and clip. With the ball mount secured, we'll go over a measurement from the ground to the top of the ball platform, about 22 inches. Now if your vehicle's hitch height matches ours and your trailer's ride height matches this measurement, this ball mount would be appropriate for you. more


Watch Video

4/29/2014 2:16:07 PM



MaxxTow Adjustable-Height Ball Mount Review - 2013 Chevrolet Suburban- Video

MaxxTow Adjustable-Height Ball Mount Review - 2013 Chevrolet Suburban

Today on our 2013 Chevrolet Suburban, we will be test fitting the maxxtow adjustable ball mount with a 10 inch drop or an 8 inch rise. Rated at 5,000 pounds, part number MT70067. Before we begin our test fit, we'll first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. We'll get measurement of about 23-1/4 of an inch. Keep in mind that this measurement may vary due to tire size, hitch style or other after market accessories. more


Watch Video

4/2/2014 9:26:21 AM



MaxxTow Ball Mount Review - 2013 Chevrolet Suburban- Video

MaxxTow Ball Mount Review - 2013 Chevrolet Suburban

Today on our 2013 Chevy Suburban, we'll be test fitting the MaxxTow Ball Mount with the 2" Accessory Receiver for 2" hitches, with a 2 1/4" drop, rated at 5,000 pounds, part number MT70066. This ball mount allows you to carry a bike rack or a cargo carrier while towing a small boat or trailer. Before we begin our test fit we will first need to obtain the hitch height for our vehicle. This is the measurement from the ground to the inside top of the receiver tube. We'll get a measurement of about 23 1/4 of an inch. Keep in mind this measurement may vary due to tire size, hitch style, or other after market accessories. We'll begin our test fit by sliding the shank of the ball mount into the opening of the hitch. After securing it with a pin and clip, we'll measure from the ground to the top of the ball platform. more


Watch Video

3/27/2014 4:52:04 PM



Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2013 Chevrolet Suburban- Video

Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2013 Chevrolet Suburban

Today on our 2013 Chevy Suburban, we'll be test fitting a Convert-A-Ball cushion ball mount for 2-inch hitches. With a 3/4-inch rise or 2-inch drop, rated at ten-thousand pounds, part number AMSC2. Before we begin our test fit, we will first obtain the hitch height of our vehicle. This is the measurement from the ground, to the inside top of the receiver tube. We'll get a measurement of about 23-1/4 of an inch. Keep in mind, this measurement may vary, due to tire size, hitch style, or other market accessories. more


Watch Video

3/17/2014 1:16:58 PM



Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2013 Chevrolet Suburban- Video

Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2013 Chevrolet Suburban

Today on our 2013 Chevy Suburban, we'll be test fitting the Convert-A-Ball cushion ball mount for 2-inch hitches. With a 1-inch rise, or 2-inch drop, rated at 14-thousand pounds, part number AMSC2HD. Before we begin our test fit, we will first obtain the hitch height of our vehicle. This is the measurement from the ground, to the inside top of the receiver tube. We'll get a measurement of about 23-1/4 of an inch. Keep in mind, this measurement may vary, due to tire size, hitch style, or other inaudible 00:00:27 market accessories. We'll begin our test fit in the drop position, by sliding the shank of the ball mount into the opening of the hitch. more


Watch Video

3/17/2014 1:16:24 PM



Curt Tri-Ball Mount Review - 2013 Chevrolet Suburban- Video

Curt Tri-Ball Mount Review - 2013 Chevrolet Suburban

Today on our 2013 Chevy Suburban, we'll be test fitting the Curt tri-ball mount for 2-inch hitches, part number C45001. Before we begin our test fit, we will first obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. We'll get a measurement of about 23-1/4 of an inch. Keep in mind, this measurement may vary, due to tire size, hitch style, or other after market accessories. We'll begin our test fit by sliding the shank of the ball mount into the opening of the hitch. more


Watch Video

3/13/2014 5:02:17 PM



Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2013 Chevrolet Suburban- Video

Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2013 Chevrolet Suburban

Today on our 2013 Chevy Suburban, we'll be test fitting a Convert-A-Ball cushion ball mount for 2-inch hitches, part number AMSC8. Before we begin our test fit, we will first obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. We'll get a measurement of about 23-1/4 of an inch. Keep in mind, this measurement vay vary, due to tire size, hitch style, or other market accessories. We'll begin our test fit in the drop position, by sliding the shank of the ball mount into the opening of the hitch. more


Watch Video

3/13/2014 5:00:10 PM



Draw-Tite Ball Mount Review - 2013 Chervolet Suburban- Video

Draw-Tite Ball Mount Review - 2013 Chervolet Suburban

Today on our 2013 Chevy Suburban we'll be test fitting the draw type ball mount with a 3/4" rise or 2" drop, rated at 7500 lbs., part no. 2923. Before we begin our test fit, we will firstly obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. We'll get a measurement of about 23-1/4". Keep in mind, this measurement may vary due to tire size, hitch style, or other after market accessories. We'll now begin our test fit in a drop position by sliding the shank of the ball mount into the opening of the hitch. more


Watch Video

2/24/2014 10:37:09 AM



Resse Titan Ball Mount Review - 2014 Chevrolet Silverado 2500- Video

Resse Titan Ball Mount Review - 2014 Chevrolet Silverado 2500

Today on our 2014 Chevrolet Silverado 2500 we'll be test fitting the Reese Titan ball mount for two and half inch receivers with a three and a half inch rise or a five inch drop. Part number 45123. To begin our test fit we'll first get our hitch height measurement. This is the measurement from the ground to the inside top edge of our receiver tube. We have a measurement of twenty one inches. Keep in mind that this measurement may vary depending on tire size, hitch style, or after-market accessories. We'll take our ball mount and install it in the draw position first. more


Watch Video

1/16/2014 4:13:31 PM



Diversi-Tech Self-Locking Ball Mount Review - 2014 Chevrolet Silverado 2500- Video

Diversi-Tech Self-Locking Ball Mount Review - 2014 Chevrolet Silverado 2500

Today on our 2014 Chevrolet Silverado 2500, we'll be test fitting the DiversiTech Self-Locking, Adjustable, Aluminum Ball Mount with 2 chrome balls, an 8" drop, and a 9" rise, rated at 10,000 pounds. Part #DTALBM6825. To help provide some extra padding for our knees when working on a hard surface, we'll be using the TruxMat, all-purpose utility mat. This mat is available and sold separately with part #TX1705064. We'll begin our test fit by first getting our hitch height. This is the measurement from the ground to the inside top edge of our receiver tube. We have a measurement of 21". Please keep in mind that this measurement may vary depending on tire size, hitch style, or after-market accessories. more


Watch Video

1/16/2014 10:55:53 AM



Convert-A-Ball Ball Mount Review - 2014 Chevrolet Silverado 2500- Video

Convert-A-Ball Ball Mount Review - 2014 Chevrolet Silverado 2500

Today on our 2014 Chevrolet Silverado 2500 we'll be test fitting the Convert-A-Ball Cushion Ball Mount for 2 and a half inch hitches with a 3 inch rise or a 4 inch drop rated at 18,000 pounds, Part Number AMSCV-4. To provide some extra padding between our knees and the hard surface, we'll also be using the truck's mat, All Purpose Utility Mat, Part Number TX1705064. We'll begin our test fit by first getting our hitch height. This is the measurement from the ground to the inside top edge of our receiver tube. We have a hitch height measurement of 21 inches. Now keep in mind that this measurement may vary depending on tire size, hitch style or after market accessories. We'll grab our ball mount and slide the shank into the receiver tube of our hitch. more


Watch Video

1/16/2014 10:53:02 AM



Reese Tri-Ball Mount Review - 2014 Chevrolet Silverado 2500- Video

Reese Tri-Ball Mount Review - 2014 Chevrolet Silverado 2500

Today on our 2014 Chevrolet Silverado 2500, we'll be testing fitting the Reese tri ball mount for 2 1/2 inch hitches. Part number 45325. To begin our test fit, we'll first get our hitch height measurement. This is the measurement to the inside top edge of our receiver tube. We have a measurement of 21 inches. Keep in mind that this measurement may vary depending on tire size, hitch style or after market accessories. more


Watch Video

1/15/2014 2:27:00 PM



Reese Titan Ball Mount Review - 2014 Chevrolet Silverado 2500- Video

Reese Titan Ball Mount Review - 2014 Chevrolet Silverado 2500

Today on our 2014 Chevrolet Silverado 2500, we'll be test fitting the Reese Titan Ball Mount for 2-1/2 inch receivers with a 3-1/2 inch Rise or 5 inch Drop, graded at 18,000 pounds part number RP45323. To begin our test fit we'll first get our hitch height measurement. This is the measurement from the ground to the inside top edge of our receiver tube. We have a measurement of 21 inches. Keep in my that this measurement may vary depending on tire size, hitch style or after market accessories. We'll install our ball mount in the drop position first, sliding the shank of the ball mount into the receiver tube of the hitch. We line up the pinhole and install our pin and clip which is sold separately. more


Watch Video

1/15/2014 2:23:50 PM



etrailer.com Ball Mount Kit Review - 2014 Chevrolet Silverado 2500- Video

etrailer.com Ball Mount Kit Review - 2014 Chevrolet Silverado 2500

Today, on our 2014 Chevrolet Silverado 2500, we'll be test fitting the etrailer.com Ball Mount Kit for 2-1/2-inch hitches with a 3-1/2-inch rise or a 5-inch drop, part number EBMK25518. We'll begin our test fit by first getting our hitch height. This is the measurement from the ground to the inside top edge of our receiver tube. We have a hitch height measurement of 21 inches. Please keep in mind that this measurement may vary due to tire size, hitch style, or after market accessories. We'll take the ball mount out of our bag and slide the shank into the receiver tube of our hitch, mounting it in the drop position. We'll line up the pin holes, and then, we'll install our pin and clip, which is not included. We'll measure from the ground to the top of our ball platform and get a measurement of 16 inches. more


Watch Video

1/15/2014 2:17:34 PM



etrailer.com Ball Mount Kit Review - 2014 Chevrolet Silverado 2500- Video

etrailer.com Ball Mount Kit Review - 2014 Chevrolet Silverado 2500

Today, on our 2014 Chevrolet Silverado 2500, well be test fitting the etrailer.com ball mount kit for 2-inch hitches with 1-inch rise, or a 3-inch drop rated at 18,000 lbs. Part number EBMK25318.This kit includes a ball mount, a 2-5/16-inch ball, and an etrailer.com ball mount bag. Well begin our test fit by obtaining our hitch height. This is the measurement from the ground to the inside top edge of our receiver tube, and we have a hitch height of 21 inches. Please keep in mind that this measurement may vary due to tire size, hitch style or after-market accessories.Now, well take our ball mount and slide the shank of our ball mount into the receiver tube of the hitch. Well line up the pinhole and insert our pin and clip, which is sold separately. more


Watch Video

1/15/2014 2:13:27 PM



Convert-A-Ball Ball Mount Review - 2014 Chevrolet Silverado 2500- Video

Convert-A-Ball Ball Mount Review - 2014 Chevrolet Silverado 2500

Today on our 2014 Chevrolet Silverado 2500 we'll be test-fitting the Convertiball cushion ball-mount for 2.5 inch hitches with a .75 inch rise or a 2 inch drop rated at 1800 pounds, part number AMSCV-2. We'll begin our test-fit by first getting our hitch height. This is the measurement from the ground to the inside top edge of our receiver tube. We have a hitch height measurement of 21 inches. Keep in mind that this measurement may vary depending on tire size, hitch style, or after-market accessories. We'll now take our ball-mount and install it in the drop position. We'll slide the shank of our mount into the receiver tube of the hitch, line up the pin hole, and install our pin and clip which is sold separately. We'll take a measurement from the ground to the top of our ball platform and get a measurement of 19 inches. When measuring your trailer ride height you want to do so when your trailer is level. more


Watch Video

1/14/2014 11:01:12 AM



Convert-A-Ball HD Ball Mount with 2 Inch Drop Review - 2014 Chevrolet Silverado-2500- Video

Convert-A-Ball HD Ball Mount with 2 Inch Drop Review - 2014 Chevrolet Silverado-2500

Today on our 2014 Chevrolet Silverado 2500 Series, we'll be test fitting the Convert-A-Ball Cushion Ball Mount for 2-inch hitches with a 1-inch rise or a 2-inch drop, rated at 14,000 pounds, part number AMSC2HD. Before we begin our test fit, we need to first insert our hitch adapter to convert it from a class 5 to a class 3 hitch. We'll then get our hitch height, which is a measurement from the ground to the inside top edge of our receiver tube. Our hitch height measurement is 20-3/4 inches. Please keep in mind that this measurement may vary depending on tire size, hitch style, or after market accessories. We'll now take our ball mount and install it in the drop position first. We'll slide the shank of the ball mount into the receiver tube of the hitch, line up all our pin holes, and insert our pin and clip. We'll measure from the ground to the top of our ball platform and get a measurement of 19 inches. more


Watch Video

1/14/2014 11:00:35 AM



Andersen Rapid Hitch Ball Mount Review - 2014 Chevrolet Silverado 2500- Video

Andersen Rapid Hitch Ball Mount Review - 2014 Chevrolet Silverado 2500

Today on our 2014 Chevrolet Silverado 2500 will be test fit in the Rapid Hitch Adjustable Aluminum Ball Mount Kit with two chrome balls with the 5 1/2 inch drop, part number AM3410. This ball mount will adjust in increments of 1 inch up to a 5 1/2 inch drop and a 6 1/2 inch rise. To begin our test fit well first need to install our sleeve adapter in to the receiver tube of our hitch to convert our hitch from a class 5 to the class 3. Now well need to obtain our hitch height. This is the measurement from the ground to the inside top edge of our receiver tube. Our hitch height measurement is 20 3/4 inches. Keep in mind that this measurement may vary depending on tire size, hitch style or aftermarket accessories. Well take our ball mount and install it in the drop position first. more


Watch Video

1/14/2014 10:41:46 AM



Draw-Tite Ball Mount Review - 1999 Chevrolet Blazer- Video

Draw-Tite Ball Mount Review - 1999 Chevrolet Blazer

(Music) Today on our 1999 Chevrolet Blazer we'll be test fitting a ball mount from Draw-Tite with a three-quarter rise and 2 inch drop, rated at 7500 pounds, part number 2923. To begin our test fit we'll go ahead and get our hitch height. This is the measurement from the ground to the inside top edge of our receiver tube. Our hitch height is 16 inches. Now we'll take our ball mount and install it in the drop position. Our measurement from the ground to the top of the ball platform is thirteen and a half inches. more


Watch Video

10/14/2013 12:48:07 PM



Draw-Tite Ball Mount Review - 2008 Chevrolet Silverado- Video

Draw-Tite Ball Mount Review - 2008 Chevrolet Silverado

Today on our 2008 Chevrolet Silverado, we'll be test fitting the Draw-Tite ball mount with a 3/4" rise or 2" drop, rated at 7500 lbs., part number 2923. Now before we begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube, and our measurement is 18". Note that the ride height of your vehicle may vary due to tire size, hitch style, or some after-market accessories. We'll now begin our test fit by sliding the ball mount into the opening of the hitch in the drop position. We'll line up the holes and secure it with a pin and clip. more


Watch Video

8/20/2013 3:23:42 PM



Diversi-Tech Adjustable Ball Mount Review - 2013 Chevrolet Tahoe- Video

Diversi-Tech Adjustable Ball Mount Review - 2013 Chevrolet Tahoe

Today on our 2013 Chevy Tahoe we will be test fitting the Diversi-Tech self-locking adjustable aluminum ball mount with two chrome balls with a six-inch drop and a seven-inch rise, right in at 10,000 pounds, part number DTALBM6600. Now before we begin our test fit, we will first need to obtain the hitch height of our vehicle, which is the measurement from the ground to the inside top of the receiver tube, and we get a measurement of 24 inches. Now to begin our test fit, in the drop position, we will slide the shake of the ball mount into the opening of the hitch, and turn the lock to engage the interlocking hitch pins on the inside of the ball mount. Now, as you can see, with using the key, you can adjust the length of the drop of the ball mount as well as switching it over to the other ball. We now can flip the ball mount over into the rise position and still see that the ball mount platform can be raised or lowered as well as flipping the ball mount over to use a different size ball. Now when choosing a ball mount for your trailer, you will first need to measure your trailers ride height. more


Watch Video

5/21/2013 11:35:34 AM



Andersen Rapid Hitch Ball Mount Review - 2013 Chevrolet Tahoe- Video

Andersen Rapid Hitch Ball Mount Review - 2013 Chevrolet Tahoe

Today on our 2013 Chevy Tahoe we will be test fitting the rapid hitch adjustable aluminum ball mount gate with two chrome balls for the 5.5 inch drop, part number AM3410. Now before we begin our test fit, we will need to first obtain the hitch height of our vehicle, which is the measurement from the ground to the inside top of the receiver tube, and we get a measurement of 24 inches. Now to begin our test fit, in the drop position, we will slide the shake of the ball mount into the opening of the hitch, line up our pinholes, insert our pin through our pinholes, and secure the clip on either side. You can notice that in the drop position, we can pull the pin here to adjust to the different height of our ball. Well now flip the ball mount over into the rise position and using the same pin that we used to lower it in the draw position, we will pull that pin out to adjust the height of our ball platform. Now, when choosing the best ball mount for your trailer, you will need to measure your trailer ride height, which is the measurement from the ground to the bottom of the coupler when your trailer is level. more


Watch Video

5/21/2013 11:19:39 AM



Curt Multi-Ball Adjustable Ball Mount Review - 2013 Chevrolet Tahoe- Video

Curt Multi-Ball Adjustable Ball Mount Review - 2013 Chevrolet Tahoe

Today on our 2013 Chevy Tahoe we'll be test fitting the Curt Multi-Ball Adjustable Ball Mount for 2 Inch Hitches, part number d900. Now before we begin our test fit we'll first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube and we'll get a measurement of 24 inches.Now to begin our test fit in the drop position we'll slide the shank of the ball mount into the opening of the hitch, line up our pin holes, insert our pin through our pin holes and secure the clip on the other side. Now with this ball mount you do have access to the three different size balls from the pin here. The ball platform can adjust up and down by the two pins here. We'll now flip the ball mount over into the rise position and as you can see we can still have access to the three different size balls as well as the ability to adjust the ball platform up and down with the two pins here. more


Watch Video

5/20/2013 3:34:13 PM



Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2013 Chevrolet Tahoe- Video

Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2013 Chevrolet Tahoe

Today on our 2013 Chevy Tahoe we'll be test fitting the Convert-A-Ball Cushion Ball Mount for 2 Inch Hitches with a 6-3/4 Inch Rise or 8 Inch Drop Rated at 10,000 Pounds, part number amsc8. Now before we begin our test fit we'll first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube where we'll get a measurement of 24 inches.To begin our test fit, in the drop position we'll slide the shank of the ball mount into the opening of the hitch, insert our pin through our pin holes and secure the clip on the other side. We'll then measure from the ground to the top of the ball platform and we'll get a measurement of 16 inches. We'll then flip the ball mount over into the rise position and measure from the ground to the top of the ball platform and we'll get a measurement of 31 inches.When choosing a ball mount for your trailer youll first need to measure your trailer's ride height. This is the measurement from the ground to the bottom of the coupler when your trailer's level. more


Watch Video

5/20/2013 1:46:47 PM



Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2013 Chevrolet Tahoe- Video

Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2013 Chevrolet Tahoe

Today on our 2013 Chevy Tahoe well be test fitting the Convert-a-ball cushioned ball mount for 2-inch hitches with a 3/4-inch rise or a 2-inch drop rated at 10,000 pounds, part number amsc2. Now before we begin our test fit we will first need to obtain the hitch height of our vehicle which is the measurement from the ground to the inside top of the receiver tube, and we get a measurement of 24 inches. Now to begin our test fit in the drop position well slide the shank of the ball mount into the opening of the hitch, line up our pin holes, insert our pin through our pin holes, and secure it with the clip on the other side. Well now measure from the ground to the top of the ball platform and well get a measurement of 22 inches. Well then flip the ball mount over into the rise position and measure from the ground to the top of the ball platform, and well get a measurement of 25 inches. When choosing a ball mount you will first need to determine your trailers ride height which is the measurement from the ground to the bottom of the coupler. more


Watch Video

5/20/2013 1:45:48 PM



Draw-Tite Ball Mount Review - 2013 Chevrolet Tahoe- Video

Draw-Tite Ball Mount Review - 2013 Chevrolet Tahoe

Today on our 2013 Chevy Tahoe well be test fitting the Draw-Tite ball mount 3/4 inch rise or 2-inch drop rated at 6,000 pounds, part number 2923. Now before we begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube, and well get a measurement of 24 inches. Well now begin our test fit by installing the ball mount on to the vehicle. In the drop position, well slide the shank of the ball mount into the opening of the hitch, line up our pin holes, insert our pin, and secure with the clip on the other side. Well then measure from the ground to the top of the ball platform and well get a measurement of 22 inches. more


Watch Video

5/20/2013 12:57:25 PM



Curt Multi-Ball Adjustable Ball Mount Review - 2013 Chevrolet Silverado- Video

Curt Multi-Ball Adjustable Ball Mount Review - 2013 Chevrolet Silverado

Today on our 2013 Chevrolet Silverado well be test fitting the Curt Multi-Ball adjustable ball mount for 2-inch hitches part number d900. Well begin by going ahead and getting our hitch height measurement. To get this measurement, you measure from the ground to the inside top edge of the receiver tube. We have a measurement of 19 1/4 inches. Now well go ahead and take our ball mount, slide the shank of our ball mount into our receive tube, line up the pin hole, and install our pin and clip. Well go ahead and mount it in the rise position first. more


Watch Video

5/3/2013 12:30:51 PM



Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2013 Chevrolet Silverado- Video

Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2013 Chevrolet Silverado

Today on our 2013 Chevrolet Silverado well be test fitting the cushioned ball mount for 2-inch hitches a 1-inch rise or a 2-inch drop rated at 14,000 pounds, part number amsc2hd. To begin we need to go ahead and get our hitch height. This is the measurement from the ground to the inside top edge of our receiver tube. Our hitch height for this vehicle is 19 1/4 inches. Now well go ahead and slide the ball mount shank into the receiver tube of our hitch, line up the hitch pin hole, and secure it with the pin and clip. First we begin in our drop position. more


Watch Video

5/3/2013 12:30:20 PM



Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2013 Chevrolet Silverado- Video

Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2013 Chevrolet Silverado

Today on our 2013 Chevrolet Silverado well be test fitting the Convert-a-Ball cushioned ball mount for two-inch hitches with a 6 inch rise or 8 inch drop rated at 10,000 pounds, part number amsc8. Now to begin well go ahead and get our hitch height measurement. To do this well measure from the ground to the inside top edge of the receiver tube opening. Our hitch height for this vehicle is 19 1/4 inches. Keep in mind that your measurement can vary due to hitch styles, tire sizes, or any other accessory that may affect your vehicles ride height. Now we can go ahead and slide the shank of our ball mount into our hitch, line up the pin hole, and install our hitch pin and clip. more


Watch Video

4/24/2013 10:28:04 AM



  1