Buick Accessories and Parts Installation And Review Videos

  

Rear View Safety Backup Monitor Installation - 2012 Buick Enclave- Video

Rear View Safety Backup Monitor Installation - 2012 Buick Enclave

Shane: Shane here with etrailer.com. Today we're going to be going over the RVS, rear view safety camera set up. This system typically is just going to come with your monitor. You're going to have to get your rear camera and your two side cameras if you decide to put those on.Another thing is typically we put these on campers or RVs. Because they're so big, it makes it a lot easier to either see past the camper or to see a couple of lanes over. The reason we put it on this car is the owner of the vehicle has a hard time turning his neck, so he wanted something that he can see a couple lanes over when he's either changing lanes or getting ready to turn, to give him that extra view that he needs because obviously he cannot turn his head.The camera set up, the RVS screen is going to be a 5.6 inch screen. more


Watch Video

10/11/2019 10:17:27 AM



Yakima Roof Rack Review - 2017 Buick Envision- Video

Yakima Roof Rack Review - 2017 Buick Envision

Speaker 1: Today is our 2017 Buick Envision. We're going to be test fitting Yakima round bar roof rack system, consisting of the round cross bars for the roof rack system, the sky line towers for the Yakima cross bars, the adapter kit to have round bars fit onto the skyline towers, and finally the landing pads which attaches to your pre-existing points on your flush side mounts.The Yakima round bar roof rack system is great for carrying a wide variety of accessories on your roof, or freeing up space inside your vehicle. This can carry bike racks, cargo baskets, and kayak carriers. The bars have a combined carrying capacity of 165 pounds, although you always want to double check with your vehicle's manual, to make sure your roof can handle those weights. These do mount to fixed points, so you don't have to worry about measuring out for cross bar spreads. And once you remove the bars themselves, they do come with end caps so you don't have to remove the landing pads and they're ready for your use next time.At the ends of each of our towers, we do have these removable caps which you can replace with the Yakima same key system. more


Watch Video

7/23/2018 8:37:10 PM



Malone Hitch Bike Racks Review - 2014 Buick Enclave- Video

Malone  Hitch Bike Racks Review - 2014 Buick Enclave

Today on our 2014 Buick Enclave, we're going to be test fitting the Malone Pilot 4 Bike Rack for number MPG2112-2115. We already have a bike installed on the rack, let's take a closer look and show off some of the features. One of the more common features about this bike is the fact that it can tilt away from the vehicle with all four bikes still attached so it can have rear hatch access. To do that, we'll come up to the front here, snap this loose, and lifting up on the rack a little bit, we'll remove the pin completely. You'll notice with that pin removed, it still doesn't fall. That's because there is a catch up at the front here to prevent it from falling so you don't have all that weight coming down at you at once, and you have time to come back here and get a decent grip. more


Watch Video

7/19/2017 7:57:27 AM



Trailer Wiring Harness Installation - 2013 Buick Enclave- Video

Trailer Wiring Harness Installation - 2013 Buick Enclave

Today on our 2013 Buick Conclave, we'll be installing the Tow Ready, T1 Vehicle Wiring Harness, part number 118579. To begin our installation on the vehicle wiring harness, we'll need to raise the rear hatch of the vehicle. We'll need to remove each of the taillight assemblies. To do this, we'll need to remove two covers that cover up small bolts on each side. You'll see that there's a bolt under each cover. We'll need to remove each of these bolts. Once these two have been removed, we can gently slide the whole light assembly out towards the rear of the vehicle. more


Watch Video

2/10/2014 5:02:29 PM



Blue Ox Base Plate Adapter Brackets Installation - 2005 Buick Rendezvous- Video

Blue Ox Base Plate Adapter Brackets Installation - 2005 Buick Rendezvous

Today on our 2005 Buick Rendezvous we'll be installing the Blue Ox baseplate adapter brackets for Roadmaster tow bars, part number BX88151. To install the baseplate adapter brackets, we'll first need to remove the attachment brackets that are already on the tow bar. To remove them, we'll go ahead and take the bolt out of the bracket and then remove the bracket completely. Now to install the new baseplate bracket, we'll take the bolt go through the bracket, then through one of the plastic flat washers down through the tow bar installing a second flat washer between the tow bar and the bracket pushing our bolt all the way through the bracket and securing with the nylon lock nut underneath. Once we have the hardware in place, we'll go ahead and tighten it down. We'll go ahead and repeat the same process on the other side. Next we'll torque to specifications as indicated in the instructions. more


Watch Video

12/4/2013 8:34:42 AM



  1