bing tracking image

Chevrolet S-10 Pickup Installation And Review Videos

  

Best 1996 Chevrolet S-10 Pickup Hitch Options- Video

Best 1996 Chevrolet S-10 Pickup Hitch Options

Today we're going to be going over the best hitch options available for your 1996 Chevrolet S10 pickup. Now when looking for hitches for your vehicle, these are going to be the two top choices that you'll find. Up at the top here we have the Draw-Tite, part number 75085. At the bottom here we have the CURT, part number C13132. Let's go ahead and take a look at some of the differences. I'm looking at the ends of the hitches, and this is more of an aesthetic choice. You'll see at the end of the CURT it's more of a flat, squared-off edge here. more


Watch Video

1/26/2017 2:47:10 PM



Best 1997 Chevrolet S-10 Pickup Hitch Options- Video

Best 1997 Chevrolet S-10 Pickup Hitch Options

Today we're going to be going over the best hitch options available for your 1997 Chevrolet S10 pickup. Now when looking for hitches for your vehicle, these are going to be the two top choices that you'll find. Up at the top here we have the Draw-Tite, part number 75085. At the bottom here we have the CURT, part number C13132. Let's go ahead and take a look at some of the differences. I'm looking at the ends of the hitches, and this is more of an aesthetic choice. You'll see at the end of the CURT it's more of a flat, squared-off edge here. more


Watch Video

1/26/2017 2:47:10 PM



Best 2000 Chevrolet S-10 Pickup Hitch Options- Video

Best 2000 Chevrolet S-10 Pickup Hitch Options

Today we're going to be going over the best hitches options available for your 2000 Chevrolet S10 pickup. Now when looking for hitches for your vehicle, these are going to be the two top choices that you'll find. Up at the top here we have the Draw-Tite, part number 75085. At the bottom here we have the CURT, part number C13132. Let's go ahead and take a look at some of the differences. I'm looking at the ends of the hitches, and this is more of an aesthetic choice. You'll see at the end of the CURT here it's more of a flat, squared-off edge here. more


Watch Video

1/25/2017 10:25:15 AM



Best 1999 Chevrolet S-10 Pickup Hitch Options- Video

Best 1999 Chevrolet S-10 Pickup Hitch Options

Today, we're going to be going over the best hitch options available for your 1999 Chevrolet S10 pickup. Now, when looking for hitches for your vehicle, these are going to be the two top choices that you'll find. Up at the top here, we have the Draw-Tite, part number 75085. At the bottom here, we have the Curt, part number C13132. Let's go ahead and look at some of the differences. I'm looking at the ends of the hitches, and this is more of an aesthetic choice, you'll see at the end of the Curt here, it's more of a flat squared off edge here. You see at the top here, with the Draw-Tite, we have this more curved edge. Now, both hitches are going to have the 5/8 pinhole here. more


Watch Video

1/25/2017 10:25:05 AM



Best 2003 Chevrolet S-10 Pickup Hitch Options- Video

Best 2003 Chevrolet S-10 Pickup Hitch Options

Today we're going to be going over the best hitch options available for your 2003 Chevrolet S10 pickup. Now when looking for hitches for your vehicle these are going to be the two top choices that you'll find. Up at the top here we have the Draw-Tite, part number 75085. At the bottom here we have the CURT, part number C13132. Let's go ahead and take a look at some of the differences. I'm looking at the ends of the hitches, and this is more of an aesthetic choice. You'll see at the end of the CURT here it's more of a flat, squared-off edge here. more


Watch Video

1/25/2017 10:25:00 AM



Best 2002 Chevrolet S-10 Pickup Hitch Options- Video

Best 2002 Chevrolet S-10 Pickup Hitch Options

Today we're going to be going over the best hitch options available for your 2002 Chevrolet S10 pickup. Now when looking for hitches for your vehicle these are going to be the two top choices the you'll find. Up on the top here we have the Draw-Tite part number 75085 and at the bottom here we have the Curt part number C13132. Let's go ahead and take a look at some of the differences. I'm looking at the ends of the hitches and this is more of an aesthetic choice. You'll see at the end of the Curt here it's more of a flat squared off edge here. more


Watch Video

1/25/2017 10:24:56 AM



Best 2001 Chevrolet S-10 Pickup Hitch Options- Video

Best 2001 Chevrolet S-10 Pickup Hitch Options

Today we're going to be going over the best hitch options available for your 2001 Chevrolet S10 Pick Up. Now when looking for hitches for your vehicle, these are going to be the two top choices that you'll find. Up at the top here we have the Draw-Tite, part number 75085, and at the bottom here we have the CURT, part number C13132. Let's go ahead and take a look at some of the differences. I'm looking at the ends of the hitches, and this is more of an aesthetic choice, you'll see at the end of the CURT here it's more of a flat squared off edge here. You see at the top here with the Draw-Tite we have this more curved edge. Now both hitches are going to have the 5/8 pinhole here, however at the Draw-Tite we're going to have this additional pinhole, and that's going to be for the j-pin stabilization system that is sold separately and acts as an anti-rattle device. You can see here with the Draw-Tite we have these circular ones here, and they're a little bit further back from our pinhole so you're not going to have any issues there hooking them up. more


Watch Video

1/25/2017 10:24:51 AM



Best 1998 Chevrolet S-10 Pickup Hitch Options- Video

Best 1998 Chevrolet S-10 Pickup Hitch Options

Today we're going to be going over the best hitch options available for your 1998 Chevrolet S10 Pick Up. Now when looking for hitches for your vehicle, these are going to be the two top choices that you'll find. Up at the top here we have the Draw-Tite, part number 75085, and at the bottom here we have the CURT, part number C13132. Let's go ahead and take a look at some of the differences. I'm looking at the ends of the hitches, and this is more of an aesthetic choice, you'll see at the end of the CURT here it's more of a flat squared off edge here. You see at the top here with the Draw-Tite we have this more curved edge. Now both hitches are going to have the 5/8 pinhole here, however at the Draw-Tite we're going to have this additional pinhole, and that's going to be for the j-pin stabilization system that is sold separately and acts as an anti-rattle device. You can see here with the Draw-Tite we have these circular ones here, and they're a little bit further back from our pinhole so you're not going to have any issues there hooking them up. more


Watch Video

1/18/2017 3:34:08 PM



Trailer Wiring Harness Installation - 1999 Chevrolet S-10- Video

Trailer Wiring Harness Installation - 1999 Chevrolet S-10

Today, on 1999 Chevrolet S10, we'll be installing the T-One Vehicle Wiring Harness with the 4-Pole Flat Connector, Part Number 118359. We will start our wiring installation by disconnecting the factory wiring connectors for the brake lights. To disconnect the wiring harness, push up on the white locking tab and pull towards the rear of the vehicle. Before we install our new wiring harness, we're going to add some electrical contact grease. We also sell this grease on our website. It's Part Number 11755. Let's put it off on there to cover all the contacts with the grease on the connectors. We can just plug our new wiring harness into the factory wiring connections. Next, we will use our factory ground to ground our wiring harness, too. more


Watch Video

8/11/2014 4:38:03 PM



TruXedo TruXport Tonneau Cover Installation - 2002 Chevrolet S-10 Pickup- Video

TruXedo TruXport Tonneau Cover Installation - 2002 Chevrolet S-10 Pickup

Today on our 2002 Chevrolet S10, well be installing the truck spot tonneau covering part number TX243101. Now after removing our tonneau cover from the packaging and ensuring all our parts well begin by installing the weather seal on the cab end corner. Youll notice these on the two side rails. Now well be using the weather seals with the corners cut out of them. Youll notice that the seals match perfectly to the cab end corners. Now that we have the weather seals on, we are ready to set the cover assembly on the front bulkhead. more


Watch Video

8/9/2012 2:04:37 AM



Wiring Harness Installation - 2003 Chevrolet S-10- Video

Wiring Harness Installation - 2003 Chevrolet S-10

Today on this 2003 Chevrolet S-10 we are going to install part number 118359 from Tow Ready. The T-One wire harness will install on the driver side frame rail at this connection point. We will disconnect it and install the T-Connector. These snap together. The last thing you have to deal with is the ground wire. Just use a self tapping screw and run it right through the bottom of the frame. Now we will take our wiring harness and route it over to our hitch. We will zip tie the wires to the license plate lights and that will keep it safely out of the way. We are already finished. There you have it for part number 118359 from Tow Ready. more


Watch Video

11/28/2010 8:39:12 PM



MagnaFlow Muffler Installation - 1991 Chevrolet S-10 Pickup- Video

MagnaFlow Muffler Installation - 1991 Chevrolet S-10 Pickup

Today on this 1991 Chevrolet S-10 we are going to be installing part number MF10784 and part number MF11226. This is going to be a little different from normal applications because we are actually doing a little bit of custom work. We are actually going to be removing the entire exhaust and replacing it with a MagnaFlow exhaust cut out and a MagnaFlow wide open muffler. The first steps we are going to show you is how to remove the complete exhaust and what we are going to have to do is remove it from the hangers and I will show you those locations right now. Before we remove everything we want to put a strap to hold up your exhaust so it does not fall when you are removing the bolts and mounts. 00:38 more


Watch Video

7/7/2010 10:43:35 AM



Trailer Wiring Harness Installation - 1993 Chevrolet S-10 Pickup- Video

Trailer Wiring Harness Installation - 1993 Chevrolet S-10 Pickup

Today on this 1993 Chevrolet S-10 Pickup truck we are going to install part number 118312 from Tow Ready, their T-One wiring connector. On the driver side frame rail of the vehicle you will see a connection point for the electrical harness right here. What you need to do is take the harness and split it apart and insert the T-One. It snaps right back into place. Then the other half. Then we will take our ground wire and ground it to the bottom of the frame right here. We will take our 4-pole wiring harness and we will just run it along the factory wiring and out to our hitch ball on our bumper. Use a few zip ties to hold everything in place and we will be good to go. Get rid of the excess and with that our install is complete. There you have it for part number 118312 from Tow Ready. more


Watch Video

7/2/2010 11:24:09 AM



TruXedo TruXport Soft Roll-up Tonneau Cover Installation - 1991 Chevrolet S-10 Pickup- Video

TruXedo TruXport Soft Roll-up Tonneau Cover Installation - 1991 Chevrolet S-10 Pickup

Today on this 1991 Chevrolet S-10 Pickup we will be installing part number TX239101 from Truxedo. Before we get started we are going to take the weather seals that are provided in the kit and attach those to our side rails for our bed cover. They are adhesive so we have to just stick them on there in the right position. We are going to let those sit for now and take our cover assembly and position it to the far most part of the trunk. When positioning this on the truck bed you want to make sure it is going to unroll down to cover your truck bed. So make sure you position it the right way. You are just going to sit it on there for now, like so. :43 more


Watch Video

6/22/2010 9:07:21 AM



TruXedo TruXport Soft Roll-up Tonneau Cover Installation - 1998 Chevrolet S-10 Pickup- Video

TruXedo TruXport Soft Roll-up Tonneau Cover Installation - 1998 Chevrolet S-10 Pickup

Today on this 1998 Chevrolet S-10 Pickup, we will be installing the TruXport tonneau cover from TruXedo, part number 243101. The first thing we want to do before we start installing our tonneau cover is install the weather seal here at the end of the corner plugs. Next we will go ahead and set the cover assembly on the front bulk head. You want to make sure at the front that the center assembly is centered on the rails. :25 more


Watch Video

3/23/2010 5:33:28 AM



WeatherTech Front Side Window Air Deflectors Installation - 2000 Chevrolet S-10 Pickup- Video

WeatherTech Front Side Window Air Deflectors Installation - 2000 Chevrolet S-10 Pickup

Today we are going to be installing window visors from WeatherTech, part number WT80018, on a 2000 Chevrolet S-10. The first thing we want to do is to do a little bit of prep work to the window. We want to just take and clean the top portion of the window off. We just use a light solvent or just regular soap and water to do this. And you also want to get in and clean out the window sill as well. For this particular set of visors, there is not any sort of adhesive that is going to be used to hold the visors in, so it is not that imperative that we get it that clean. But on some of the visors, there will be additional double-sided tape to help hold it into the sill, and in that case you want to make sure you get it cleaned out really well. more


Watch Video

6/5/2009 9:58:02 AM



  1