View Cart

Trailer Lights Installation And Review Videos


Review of Peterson Trailer Lights - Trailer Lights - 415K- Video

Review of Peterson Trailer Lights - Trailer Lights - 415K

Today we're going to take a look at the Peterson Round Submersible Trailer Backup Light with the grommet and the two wire plug. Now this is an incandescent trailer light. Which will provide a backup light function for trailers and utility trucks. It's a nice sealed waterproof housing and lens unit. It uses a premium bulb that's rated up to 15,000 hours and the bulb type it uses an 1156 dual filament design. Does use a wedge-base socket to prevent premature failure. more


Watch Video

6/18/2019 10:47:19 AM



Review of Peterson Trailer Lights - Clearance Lights - 425850- Video

Review of Peterson Trailer Lights - Clearance Lights - 425850

Today, we're going to be taking a look at the Peterson Trailer Clearance Light. This is going to be a nice round lens, amber light to help you stay visible out on the road, and also stay compliant with all DOT laws. We'll have our two prongs to the back, so that we can get that mounted up to any of our wiring harnesses that look the same. It's a standard size, so there's a lot of different little wiring harnesses that'll work with this. Just plug that into the back. It does come with some dielectric grease on there, so you might notice there's some sticky stuff. more


Watch Video

6/12/2019 2:07:18 PM



Review of Optronics Trailer Lights - Clearance Lights - MCL61RB- Video

Review of Optronics Trailer Lights - Clearance Lights - MCL61RB

Today we'll be taking a look at the ThinLine LED Clearance or Side Marker Light. This is going to be a submersible light, so it'll work for our marine trailers where we need to have it stay nice and watertight, but it also works for just about any other trailer or enclosed trailer that you might want to mount it up on, and it should have a nice long life since we don't have to worry about any water or debris getting in there. It does have a sonically sealed, waterproof housing, so it is submersible.We'll have two diodes in there to give us our light. It's a rectangular style with a red lens. This can work out for your clearance or your side marker lights since this is P2 rated. Basically that means that it gives you 45 degrees of viewing from the center line or from when you're looking at it. more


Watch Video

6/12/2019 1:42:37 PM



Review of Optronics Trailer Lights - License Plate Lights - LPL81C1B- Video

Review of Optronics Trailer Lights - License Plate Lights - LPL81C1B

Today we'll be taking a look at the Optronics LED trailer license plate light. This is going to illuminate your license plate on your trailer to make it visible to other drivers, and also to stay within DOT compliance. It's going to be durable housing, polycarbonate lens and housing's also made of that polycarbonate. This is sonically sealed, so that means that the housing and the lens unit are submersible. It's going to work for marine trailers or really any trailer that's going to be out in the elements for a long time. It's going to keep any dirt, water, debris from getting in there and causing issues with your electrical connections. more


Watch Video

6/5/2019 4:07:21 PM



Review of Peterson Trailer Lights - Red Reflector - B480R- Video

Review of Peterson Trailer Lights - Red Reflector - B480R

Today we'll be taking a little quick look at the Peterson Quick Mount Trailer Reflector. This helps to keep your trailer visible even when it doesn't have any lights on. You can see the reflector picks up the light and throws it right back at you, and that helps you know again where the trailer is. Has sort of a diamond pattern in there. It looks really nice. It's made of a durable acrylic construction. more


Watch Video

5/23/2019 10:42:49 AM



Review of Optronics Trailer Lights - Stop Turn Tail Lights - STL22RBH- Video

Review of Optronics Trailer Lights - Stop Turn Tail Lights - STL22RBH

Today we'll be taking a look at the Optronics Micro-Flex LED trailer light. This is going to have three different functions. We'll have our running lights, brake lights, and turn signal function, so we'll be able to stop, turn, and use our tail lights as well.Has a three-wire plug at the back, so it makes it easy to connect this up. Just plug it in to a three-pronged harness that fits that same design there. It's a pretty standard plug. You can find a lot of wiring options here at etrailer.com.The light has a Micro-Flex faceted lens, which just helps to reflect all that ambient light. more


Watch Video

5/20/2019 12:22:21 PM



Review of Peterson Trailer Lights - Stop Turn Tail Reverse Light - M880-7- Video

Review of Peterson Trailer Lights - Stop Turn Tail Reverse Light - M880-7

Today we'll be taking a look at the Peterson Trailer Tail Lights. This is going to offer you four different functions in one light. Right now I have it turned on with just a running light circuit, but it's also going to serve as your stop and tail light or turn light and it also gives you your backup function by giving you that white LED, just a clear light there.So it's really nice that it provides four in one and it's a really nice looking light, has that red lens going over most of our LED's and then the single byte one to serve as our reverse signal.The other advantage with using LEDs is that it keeps us from having to do any maintenance with our light, no bulbs to replace as there's no filaments that can break, so it's going to last for a long time. We really don't have to worry about it once it's installed.They're also going to be more efficient, use less power for just the same output of light and they don't really build up as much heat as your traditional incandescent bulb.It measures about six and a half inches long, by about two and a quarter inches wide side to side there and then from front to back, it's about an inch and a half deep going to that outer portion on our port here.Now on the back we'll have a plug to get our wiring functions. This is going to be part number 417-43, that's that three wire plug. You can find that here at etrailer.com using that part number, it is sold separately. more


Watch Video

5/20/2019 11:17:24 AM



Review of Optronics Trailer Lights - Interior Lights - 06001072B- Video

Review of Optronics Trailer Lights - Interior Lights - 06001072B

Today we're going to take a look at the Europa Incandescent RV Directional Light With Switch. This allows you to get a easy access little dome light in your RV, or your other vehicle if you want to mount it pretty much anywhere. We'll be able to swivel our light to get it where we need it to be, whether we're trying to read a map late at night, or just trying to read a book and one of the little nooks in our RV somewhere.Does swivel around. It's kind of . You kind of have to coax it a little bit, but it will give you some adjustability as far as getting that light pointed where you need it to look .. need it to be. more


Watch Video

5/8/2019 6:33:09 PM



Optronics Trailer Clearance and Side Marker Light Review and Installation- Video

Optronics Trailer Clearance and Side Marker Light Review and Installation

Ryan: Hey, everybody. Ryan here at etrailer.com. Today we're going to be taking a look at, and showing you how to install the Optronics trailer clearance or side marker light, which is an incandescent bulb, and a red lens. Here we have our Optronics light in place and turned on. Even though this is a single incandescent bulb, this is going to put out enough light to keep you, not only safe, but legal. These lights are going to work great for a direct replacement. more


Watch Video

5/8/2019 11:27:51 AM



Review of Optronics Trailer Lights - Clearance Lights - MCL11SACKB- Video

Review of Optronics Trailer Lights - Clearance Lights - MCL11SACKB

more


Watch Video

5/2/2019 12:47:18 PM



Review of Peterson Trailer Lights - Clearance Lights - 428100- Video

Review of Peterson Trailer Lights - Clearance Lights - 428100

Today we're taking a look at the Peterson Identification Light Bar. Now this unit adds or replaces an identification light bar on your trailer. The lights are incandescent lights so each one has one incandescent bulb. So we have a three-bulb design total. It is a submersible ID light bar for over 80 inch applications.We have a black polycarbonate base that's corrosion-proof, and again, it has three lights on it. Each one has a sealed design, so it is submersible. more


Watch Video

4/26/2019 7:48:07 AM



Review of Optronics Trailer Lights - Clearance Lights - MCL56AMB- Video

Review of Optronics Trailer Lights - Clearance Lights - MCL56AMB

Today we're going to take a look at the Optronics LED Clearance or Side Marker Light. This is going to help you stay safe out on the road, help other drivers see where you are with your trailer, and acts as your side marker or your clearance light. Since this is P2 rated, it can really only be used as one or the other. It can't be used as both at the same time. We'll have the amber lens going over our white LED. This is going to be a sonically sealed light, so that means that our lens and our housing is submersible. more


Watch Video

4/25/2019 12:50:28 PM



Review of Optronics Trailer Lights - Tail Lights - BUL06CFB- Video

Review of Optronics Trailer Lights - Tail Lights - BUL06CFB

Today we're going to take a look at the LED backup light for truck or trailer. This light is going to give you that backup signal whenever you turn on your lights and you go into reverse. Helps to illuminate the night, make it a little easier to see where you're going, and also lets other drivers know that you're backing up.It's going to be a submersible light so it'll work out well for marine trailers as well as just your everyday trailer, enclosed trailers, other things like that. You can also use this on flatbed trucks. Anything that's going to have that larger, bulkier frame that you need this nice big recessed mount backup light for.It does have that built-in flange with a little kind of foam gasket there. Helps to give it a little bit of road shock protection and also seal up the back of our light.As you can see, my light is on right now. more


Watch Video

4/25/2019 12:50:15 PM



Peterson LED Light Kit Review- Video

Peterson LED Light Kit Review

Jake: Hey guys. This is Jake here at etrailer. We're going to be taking a look at, and showing you how to install, the Peterson LED Tail Light Kit for trailers over 80" wide.Now, these new LED tail lights are going to be a good replacement for your incandescent factory lights that might come on your trailer. They're also going to be great for those boat trailers because they are fully submergible so they're going to do well in those heavy water situations.Now, you're kit is going to come included with a full set of wiring in order to wire your whole trailer up, and this license plate holder in case your old one might be broken or brittle.So the LED lights that make up this tail light are going to be brighter, and draw less power from your system. They are also going to last 50 times longer than the standard incandescent bulbs.The dimensions of this light are going to be 5-3/8" long, 4-5/8" tall and 1-13/16th deep.Now the durable service mount technology in the LED circuit board is going to withstand those shocks and sharp jarring of the trailer.The included wiring harness is going to be 25 feet long. It does include a four pull connection so if you need a longer one or a different configuration just check etrailer.com.So here you can see we have our old incandescent lights. more


Watch Video

4/24/2019 2:42:14 PM



Dragon's Eye LED Clearance or Side Marker Light Review- Video

Dragon's Eye LED Clearance or Side Marker Light Review

Jake: Hey guys. It's Jake here at etrailer. Today we're going to be taking a look at and show you how to install the Dragon Eye Amber Side Markers.This light is gonna have have two LED's, one on this side and one on this side. It's going to be pointed forward and backwards. The difference between this light and another lights is, that this light is gonna have an amber lens with clear LED's. Now, you do have an option on etrailer.com for a clear lens and amber LED's. more


Watch Video

4/24/2019 2:32:20 PM



Review of Optronics Hitch Step - Fixed Step - STL12RCB- Video

Review of Optronics Hitch Step - Fixed Step - STL12RCB

Today we'll be taking a look at the Optronics LED Trailer Tail Light. Now, this is going to have several functions including your stop, turn, and tail light. So, it'll act as those three functions. It is a submersible light so you can use this on boat trailers, enclosed trailers, pretty much anywhere where that will need to have those lightning functions.It is a sonically sealed light, so it's water-proof. Again, we can use it on a boat trailer. Our lens and housing is made of a durable polycarbonate. more


Watch Video

4/18/2019 7:04:43 PM



Diamond Dragon's Eye LED Clearance or Side Marker Light Review and Installation- Video

Diamond Dragon's Eye LED Clearance or Side Marker Light Review and Installation

Today we're gonna be taking a look at and showing you how to install the Dragon's Eye LED Clearance or Side Marker Light.Now this is what the light's going to look like when it's turned on. As you can see, the two diodes put off more than enough light. I really like it because it's LED, which means you're not gonna have to worry about any brittle filaments breaking like your traditional style incandescent lights, and it's gonna use less power to put off a brighter light.Another reason I like this light is because how compact it is. It's going to measure only 2-5/8" long, 1-1/4" tall. From bolt hole to bolt hole, it's going to measure 1-15/16" and it's going to be 3/4" deep.The light is DOT compliant. It is a great upgrade from an incandescent light, because the LEDs last a lot longer. more


Watch Video

4/16/2019 10:07:32 AM



Optronics Light Guide LED Truck/Trailer Light Review and Installation- Video

Optronics Light Guide LED Truck/Trailer Light Review and Installation

Today we're gonna be taking a look at, and showing you how to install, the Light Guide LED Truck and Trailer Light.Now what sets this light apart from many of the others is not only is it a super bright reverse light, you also have the added safety of a running light. Now these lights are LEDs, which are much more reliable than your traditional incandescent style bulb. Overall, they're gonna use less power and be brighter.Now here's the measurements to see if it'll work for your needs. The light itself is four and 5/16 of an inch round. The thickness of the light, without the plug, is an inch and 1/16 thick. If you add the plug on there, the thickness is gonna go up to one inch and 11/16.All right, here on the back of the light we have our connection points. more


Watch Video

4/15/2019 10:57:15 AM



Peterson LumenX LED Trailer Tail Light Review and Installation- Video

Peterson LumenX LED Trailer Tail Light Review and Installation

Today we're going to be taking a look at and showing you how to install the Peterson-Lumenx LED Trailer Tail Light. This light's going to give us all our necessary functions like our running lights. Our turn signals and our brake lights. As you can see these LED's are really going to put off a lot of light. Not only help keep you safe but other passengers on the road as well.Now what sets this light apart from any of the others is that it's LED. Those LED's are going to last a lot longer, they're going to be more reliable because you don't have to worry about any brittle filaments like tour traditional incandescent light has. more


Watch Video

4/15/2019 10:52:15 AM



Optronics ONE LED Trailer Tail Light Review and Installation- Video

Optronics ONE LED Trailer Tail Light Review and Installation

Today, we're gonna be taking a look at and showing you how to install the Optronics ONE LED trailer taillight. This light's going to provide us with all our necessary functions to help us stay legal and safe, such as our running lights, our turn signals and our brake lights. As you can see, even with fewer diodes than most they're still more than bright enough to keep visible. Now what I really like about these lights is that their LED, which means you're not gonna have to worry about any brittle filaments like your traditional style incandescence light, which means they're gonna be more reliable, last a lot longer, put out a brighter light all while using less power. These lights are sonically sealed, which means they can't be submersed. However, my personal opinion, I would not have power to it when doing so or keep it under water for any length of time.It does have a polycarbonate lens which is going to be nice and durable and less susceptible to cracking. more


Watch Video

4/15/2019 10:42:52 AM



GloLight LED Trailer Tail Light Review and Installation- Video

GloLight LED Trailer Tail Light Review and Installation

Today, we're going to be taking a look at and showing you how to install the GloLight LED trailer tail light with the clear lens.What sets this light apart from many of the others is its running light. As you can see, it has that circular halo design, and puts out a pretty good amount of light. Now, when you hit the brake lights, it really makes a difference in how bright it is, to let others know that you're applying the brakes. Same thing with the blinker. As you can tell, it's nice and bright.Another thing that separates this light from many of the others is its clear lens. In my opinion, when the light's not in use, it just gives off a little more of a clean look. more


Watch Video

4/15/2019 10:37:15 AM



Peterson LED Trailer Tail Light Review and Installation- Video

Peterson LED Trailer Tail Light Review and Installation

Today we're going to be taking a look at, and showing you how to install the Peterson LED Trailer Tail Light. This light's going to give you your running light, your blinker, and your brake lights. What's great about these is that they're LED, which are really, really bright. So not only are they going to help keep you safe, they're also going to help other motorists on the road see you more clearly.The lights going to have seven diodes. What's really nice about the LED lights, you don't have to worry about any brittle filaments like you would with your traditional incandescent style lights. Not only are they going to last a lot longer, they're going to put off a more significant amount of light, and they're going to use way less power to do that.This light accepts an input of nine to 16 volts. more


Watch Video

4/12/2019 2:22:11 PM



Diamond Dragon's Eye LED Clearance or Side Marker Light Review and Installation- Video

Diamond Dragon's Eye LED Clearance or Side Marker Light Review and Installation

Today we're gonna be taking a look at and showing you how to install the Dragon's Eye LED Clearance or Side Market Light. Here's what the light looks like while it's on. As you can see, it's nice and bright, and it's that way because it's an LED. That's one of the nice things about it. With an LED, you don't have to worry about brittle filaments like your traditional incandescent bulbs. It's also gonna use less power to run. more


Watch Video

4/12/2019 2:17:10 PM



Review of Peterson Trailer Lights - Clearance Lights - M143A- Video

Review of Peterson Trailer Lights - Clearance Lights - M143A

Today we're going to take a look at the Peterson trailer clearance or side marker light. In addition to being a light itself it also has a reflector, as you can see there, to have visibility even when we're not using our trailer and we don't have our lights on. It'll stay be visible even at night when the light shines on it.This is going to be a submersible light. It is an incandescent, so you might be able to see the bulb there from the side. It's just a single bulb design, and at the back we'll have our two prongs that we can connect to our wiring and get hooked up.With our plug in place, that'll give us our lighting functions. Our light function. more


Watch Video

4/8/2019 8:05:23 PM



Review of Peterson Trailer Lights - Clearance Lights - M140FA- Video

Review of Peterson Trailer Lights - Clearance Lights - M140FA

Today we're going to take a look at the Peterson Trailer Clearance or Side Marker Light with Reflex Reflector.This is going to be a nice round light. It helps to give better visibility for your trailer with that reflector as well as our light function.It accepts an industry standard two prong plug at the back. It comes with a little tape on those prongs to keep in the already applied dielectric grease, that's going to be that sticky stuff that you see back there, and that's just to help protect the connection, make sure that no dirt or debris gets into that terminal. It keeps corrosion to a minimum.So I've got my two prong plug here. This is sold separately. This one, in particular, is going to be Part number B431-49. more


Watch Video

4/8/2019 8:02:51 PM



Review of Peterson Trailer Lights - Clearance Lights - M175R- Video

Review of Peterson Trailer Lights - Clearance Lights - M175R

Today we're going to take a look at the Peterson LED Clearance or Side Marker Light for your trailer. This is a built-in reflector so you don't have to worry about getting a separate one to maintain compliance out on the road. As you can see it's going to reflect really well there and keep us visible and safe even when the light isn't on. At the back we'll have this two-prong female end to accept our two-prong plug. Those are available separately. It just pushes in to the ports and gives you your wiring connection.Whenever you're initially pushing this in it's a little difficult. more


Watch Video

4/8/2019 8:02:30 PM



Review of Peterson Trailer Lights - Clearance Lights - M173R- Video

Review of Peterson Trailer Lights - Clearance Lights - M173R

Today we're going to take a look at the Piranha LED clearance or side marker light with reflector. Now by having our reflector built into the lens of our light it eliminates the need to get a separate reflector for our trailer. You can see we can reflect that light back. So that's going to let people know that our trailer is there even when we don't have our light turned on. At the back we'll have our two female terminals to allow our two prong plug to get hooked up. These prongs are available separately. more


Watch Video

4/8/2019 8:02:20 PM



Review of Peterson Trailer Lights - Clearance Lights - M163R- Video

Review of Peterson Trailer Lights - Clearance Lights - M163R

Today, we're taking a look at the Peterson Piranha LED trailer clearance and side marker light. This being an LED light, it's gonna last longer than your typical incandescent bulb, and it's also going to act as our clearance light and our side marker light, since it's PC-rated. It will be able to be seen in that 180 degree range or 90 degrees off the center line.This is a nice looking mount. We'll have our five diodes installed there. On the back, it has a plug or a port to allow our two-prong plug to get pushed in giving us our wiring connection. The two-prong plug is available separately. more


Watch Video

4/8/2019 8:02:07 PM



Review of Peterson Trailer Lights - Clearance Lights - M143R- Video

Review of Peterson Trailer Lights - Clearance Lights - M143R

Today we're taking a look at the Peterson trailer clearance or side marker light with reflector. Now if you need to upgrade or replace your existing lights on your trailer, this is going to be a great fit. It's submersible, round, red lens light, so it'll work out great for any brake light function that you might want it to work for on the back of your trailer.If I can find the right angle there, you'll see that reflector allows the light to be visible even when it's not shining. So we'll have good visibility even on those times when we don't have our lights on. But on the back, we'll have our wiring connection to make to a two prong plug. Those are sold separately. more


Watch Video

4/8/2019 8:01:55 PM



Review of Peterson Trailer Lights - Clearance Lights - M140FR- Video

Review of Peterson Trailer Lights - Clearance Lights - M140FR

Today we're going to take a quick look at the Peterson Trailer Clearance or Side Marker Light with Reflex Reflector. This is going to be a necessary addition to your trailer, maybe to replace or upgrade an old light. The nice thing about this is that it has a reflector built in, so you can see it's reflecting that light back at you. Makes our trailer more visible, especially if we are moving around at night. Maybe we don't have our lights on, or the trailer's parked somewhere. It just makes it easier to see.In addition to that on the back we'll have our attachment point for our wiring. more


Watch Video

4/8/2019 8:01:44 PM



Review of Peterson Trailer Lights - Clearance Lights - M175A- Video

Review of Peterson Trailer Lights - Clearance Lights - M175A

Today we're going to take a look at the Peterson LED Trailer Clearance or Side Marker Light with reflector.It's important to have a reflector and light on your trailer so that it's going to be clearly visible, even at night. You can see if I get my reflector at the right angle, it's going to just refract the light back to us making our trailer visible, even when the light's not on. There we go, you can see it reflecting there. Just make sure that we can still be seen, find our trailer, even in the dark.At the back we'll have our two prongs to connect to our wire. It's going to take a two prong pigtail, that's available separately. You can find that here at Etrailer.com. more


Watch Video

4/8/2019 8:00:42 PM



Review of Peterson Trailer Lights - Clearance Lights - M173A- Video

Review of Peterson Trailer Lights - Clearance Lights - M173A

Today, we're going to take a look at the Piranha LED trailer clearance or side marker light with reflector. Now, this is an important component to have on your trailer to make sure that you're visible, even at night, and even if your trailer is parked somewhere, you want to make sure that people can still see it. You'll see our reflector there makes it easy to spot. And then, we'll also have our light itself. We plug in our two wire prong, this is sold separately. You can find it here at etrailer.com. more


Watch Video

4/8/2019 8:00:32 PM



Review of Peterson Trailer Lights - Clearance Lights - M163A- Video

Review of Peterson Trailer Lights - Clearance Lights - M163A

Today we're going to take a look at the Petersen Pirana LED trailer clearance and side marker light.This is gonna have LEDs instead of an incandescent bulb. It's going to be a much more efficient and longer lasting light than you would typically have out of an incandescent bulb. There's no filaments that can break, it's gonna be more energy efficient because there's less power draw from this than your incandescent bulbs. Overall, it's just a little bit brighter.To connect this we'll have those two female prongs at the back, or female plugs, and we'll bring in our two prong male end. This is sold separately, the wiring you can find right here at etrailer.com, but it just snaps in place, makes it really easy to connect. Turn on our power, and you'll see we'll have our four diodes there. more


Watch Video

4/8/2019 8:00:25 PM



Review of Peterson Trailer Lights - Reflectors - B480A- Video

Review of Peterson Trailer Lights - Reflectors - B480A

Today we're going to take a quick look at the Peterson Trailer Reflector. This is going to add a little more visibility to your trailer. As you can see it's going to have that nice reflective material, so that even when we're driving in the dark people will be able to see our trailer in place. It has an adhesive backing and also two holes to allow you to either use the backing to just stick it in place or mount it with a couple of screws on either side for a more permanent secure mounting position.It's going to meet all FMVSS 108 requirements when properly installed. That's just the Federal Motor Vehicle Safety Standard. As far our dimensions, it's about ... more


Watch Video

4/5/2019 8:33:38 PM



Review of Peterson Trailer Lights - License Plate Lights - M154C- Video

Review of Peterson Trailer Lights - License Plate Lights - M154C

Today we're going to take a look at the Peterson submersible trailer license plate light. Now, this is a nice compact, incandescent light that illuminates your trailer's license plate. It is a sealed unit, so it is submersible. It uses a durable polycarbonate lens and housing. It has a nice, clear, painted lens over an incandescent bulb.It is designed to mount onto the surface of the trailer with the mounting bracket. Now, the mounting brackets we do sell separately on our website. more


Watch Video

4/5/2019 1:32:57 PM



Review of Peterson Trailer Lights - Reflectors - B475A- Video

Review of Peterson Trailer Lights - Reflectors - B475A

Today we're going to take a look at the Peterson Amber Stick-on Adhesive Reflector for a truck or a trailer. It's for a quantity of one. This is a round, amber trailer reflector which'll enhance visibility on the road.You can see it's a nice, durable acrylic construction. inaudible 00:00:15 surface mount with the adhesive backing. You just peel that off and then stick it where you need to. This does meet the Federal Motor Vehicle Safety Standards 108 standard, when it's properly applied.A few specs on this. more


Watch Video

4/5/2019 1:10:19 PM



Review of Peterson Trailer Lights - Tail Lights - M824R- Video

Review of Peterson Trailer Lights - Tail Lights - M824R

Today, we're going to take a look at the Peterson round, LED stop, turn, and taillight with the gray flange. Now, this is a red, round trailer light that serves three functions on the trailers. Offers a stoplight, taillight, and a turn signal light, and it uses LEDs, which will make great replacements for incandescent lights, 'cause the LEDs will last about 50 times longer. They're more efficient, provide brighter light with less power output. And of course, no bulbs to replace, no brittle filaments. It's a red lens over white LEDs. more


Watch Video

4/5/2019 10:43:01 AM



Review of Peterson Trailer Lights - License Plate Lights - M298C- Video

Review of Peterson Trailer Lights - License Plate Lights - M298C

Today, we're gonna take a look at the Peterson Great White chrome snap-in LED trailer license plate light. Now, this compact LED light illuminates your trailer's license plate, can also be used in utility courtesy light applications. The LEDs make great replacements for incandescent lights 'cause they'll last 50 times longer. They're more efficient, provide brighter light with less power output, and of course, no bulbs to replace or no brittle filaments.This one is a white lens over a white LED, has a chrome-plated steel housing that'll shield the top half of the light, and it is a simple snap-in installation. Requires a one and a quarter inch diameter hole for mounting. You can see it's a two wire pigtail design, includes the power lead and a ground wire, and the length on those wire leads are about eight inches.This light is DOT compliant when it's mounted in pairs, one on each side of the license plate. more


Watch Video

4/5/2019 10:10:25 AM



Review of Peterson Trailer Lights - License Plate Lights - M290- Video

Review of Peterson Trailer Lights - License Plate Lights - M290

Today we're going to take a look at the Peterson Great Light surface-mount LED utility or trailer license plate light. Now this is a nice, compact LED trailer light that'll function as either a utility light or a license plate light.A single LED light like this will meet the DOT requirements when mounted properly above your license plate. And LEDs make great replacements for incandescent lights, because they'll last 50 times longer. They're more efficient, because they'll provide brighter light with less power output, and no bulbs to replace, or no brittle filaments.This one is a clear lens over a white LED. You can see it has a nice, black housing to it. It is a surface-mount design. more


Watch Video

4/5/2019 9:40:23 AM



Review of Peterson Trailer Lights - Interior Lights - 359-1- Video

Review of Peterson Trailer Lights - Interior Lights - 359-1

Today we're gonna take a look at the Peterson 6" long great white LED trailer interior cove light. Now this interior cove lighting strip provides a nice bright light to illuminate an interior space. It's perfect for enclosed trailers. Does use a molded sealing to help resist dust, moisture and vapor. Does use four white LEDs and this is compatible with 12 volt and 24 volt systems. It is a surface mount design. more


Watch Video

4/5/2019 9:10:20 AM



Review of Peterson Trailer Lights - License Plate Lights - M290B-P- Video

Review of Peterson Trailer Lights - License Plate Lights - M290B-P

Today we're gonna take a look at the Peterson great white surface mount LED trailer license plate light with the bracket. Now this is a nice compact LED light that illuminates your trailer's license plate. Uses a single LED light, which will meet the DOT requirements when this is properly mounted above your license plate. The LEDs make great replacements for incandescent lights 'cause they'll last about 50 times longer, and are more efficient 'cause they'll provide brighter light with less power output. And of course, no bulbs to replace or brittle filaments. Uses a clear lens over a nice white LED. more


Watch Video

4/4/2019 1:50:21 PM



Review of Peterson Trailer Lights - License Plate Lights - M290C-BT2- Video

Review of Peterson Trailer Lights - License Plate Lights - M290C-BT2

Today we're gonna take a look at the Peterson Great White Top Mount, LED Trailer License Plate Light. Now this is a nice compact LED light that illuminates your trailer's license plate. Uses a single LED light, which will meet DOT requirements when it's mounted properly above your license plate. The LEDS are nice because they make great replacements for incandescent lights, they last about 50 times longer. They're more efficient, they'll provide brighter light with less power output. Of course no bulbs to replace or no brittle filaments. more


Watch Video

4/4/2019 1:00:24 PM



Review of Peterson Trailer Lights - License Plate Lights - M291C-BT2- Video

Review of Peterson Trailer Lights - License Plate Lights - M291C-BT2

Today we're going take a look at the Peterson Great White Round LED trailer license plate light. Now this is a nice compact LED light, illuminates your trailer's license plate. It is a single LED light which will meet the DOT requirements when it's mounted properly above or on the side of your license plate, and an LED makes great replacements for incandescent lights because they'll last 50 times longer and they're more efficient, provide brighter light with less power output and of course, no bulbs to replace with brittle filaments. This is a nice clear lens over a white LED. It is a recessed mount. Comes with the included grommet. more


Watch Video

4/4/2019 12:00:28 PM



Review of Peterson Trailer Lights - Reflectors - 465-4K- Video

Review of Peterson Trailer Lights - Reflectors - 465-4K

Today we're going to take a look at the Peterson 18 inch long white and red conspicuity reflective tape strips for a quantity of four. Now this tape is used on utility trailers, boat trailers, heavy duty trucks and trailers. You can see it's an alternating 18 inch long red and white reflective tape. Makes your truck or trailer more visible in low light, has seven inches of the white 11 inches of the red pattern and it does use industrial strength adhesive that easily applies to flat or curved surfaces and it is made in the USA. This is for a quantity of four strips. Again, the overall dimension length is 18 inches by two inches wide. more


Watch Video

4/4/2019 11:12:30 AM



Review of Peterson Trailer Lights - Interior Lights - 359-3- Video

Review of Peterson Trailer Lights - Interior Lights - 359-3

Today we're going to take a look at the Peterson 18 inch long Great white LED trailer Interior Cove Light. Now this interior cove lighting strip provides a nice bright light to illuminate an interior space. It is perfect for enclosed trailers. It does use molded ceiling to help resist dust, moisture and vapor. It does use 12 white LEDs on it and it is compatible with 12 volt and 24 volt systems. It is a surface mount design. more


Watch Video

4/4/2019 9:00:23 AM



Review of Peterson Trailer Lights - Interior Lights - 359-2- Video

Review of Peterson Trailer Lights - Interior Lights - 359-2

Today we're gonna take a look at the Peterson 12 inch long Great White LED Trailer interior Cove Light. Now this interior cove lighting strip will provide a nice bright light to illuminate an interior space. It is perfect for enclosed trailers, it does use molded ceiling to help resist dust, moisture, and vapor. It does have six white LEDs on it, and it is compatible with 12 volt and 24 volt systems. It is a surface mount design, you'd mount it to the trailer wall or the ceiling. It can be mounted either horizontally or vertically. more


Watch Video

4/4/2019 8:21:03 AM



Review of Peterson Trailer Lights - Clearance Lights - M169-3R- Video

Review of Peterson Trailer Lights - Clearance Lights - M169-3R

Today we're gonna take a look at the Peterson Rectangular Red LED Identification Light Bar for Trailers over 80 inches wide.Now this LED trailer light'll function as an identification light bar for trailers that are wider than 80 inches. Basically, the identification lights are the three marker lamps at the top rear of your trailer, and it's mounted around the center line of the vehicle, and their purpose is to alert following drivers that the vehicle equipped with these lights is wider than 80 inches.Now the LEDs they use, they make great replacements for incandescent lights, 'cause they'll last 50 times longer, and they're more efficient, provide brighter light with less power output, and of course no bulbs to replace or no brittle filaments.This light is all in a nice sealed housing with the rubber mounting gasket. It has a red lens. It mounts to the surface of the trailer, now the hardware to install this is not included. If you notice, it's a 2-wire pigtail here, includes the power lead, and the white ground wire. Ground wire of course, has a #10 Ring terminal on it. more


Watch Video

4/3/2019 2:05:24 PM



Review of Optronics Trailer Lights - Clearance Lights - MCL40APB- Video

Review of Optronics Trailer Lights - Clearance Lights - MCL40APB

Today we're gonna take a look at the Optronics LED Clearance or Side Marker Light with Reflector. This is going to be an LED light to keep you in compliance with all the rules of the road, and also keep you safe. It will replace, or upgrade any of your existing trailer lights.The nice thing about this is that since it's an LED, we don't have to worry about any maintenance with this. There's no bulbs that can go bad on us that we have to open up the housing, get in there and change out the bulbs, find them first of all, and then replace them. Pretty much as soon as we have this installed, it's good to go. We won't really need to replace it unless something happens where the lens itself gets damaged.It has that built in reflector, so that even when the lights aren't on our trailer will still be visible by reflecting that light. more


Watch Video

4/2/2019 5:50:55 PM



Review of Optronics Trailer Lights - Clearance Lights - 00212706P- Video

Review of Optronics Trailer Lights - Clearance Lights - 00212706P

Today we're taking a look at the Optronics Millennium M5 LED Clearance or Side Marker light. This is an amber light. It features an oval LED design, so the oval LED trailer light functions as a clearance or side marker light when properly mounted on your trailer. It does come with the chrome bezel which provides a finished look that's gonna cover the installation hardware. It does feature a sealed waterproof housing and lens unit. It's LED, so LEDs make great replacements for incandescent lights, they last longer, they burn brighter and they're more efficient. more


Watch Video

3/21/2019 10:00:25 PM



Optronics Identification Light Bar Installation- Video

Optronics Identification Light Bar Installation

Hi, I'm Shane with etrailer.com. Today, we're going to be taking a look at, I'm going to show you how to install Optronics 3 Diode LED Identification Light Bar on our flatbed trailer. It's going to function as a third tail light. You can see we're going to have three LED lights. It's going to be 17 inches long by an inch and three eighths, by one inch. It's going to be fully sealed, and waterproof. more


Watch Video

3/20/2019 3:07:21 PM



  1     2     3