Trailer Jack Installation And Review Videos


Bulldog Square A-Frame Jack Review and Installation- Video

Bulldog Square A-Frame Jack Review and Installation

Shane: Hi, I'm Shane with etrailer.com. Today I'm going to walk you through how to install Bulldog's square tube A-frame bolt-on jack. In my opinion, the square tube jack is going to be the way to go, over the round tube. I think it gives you a little bit more stability. Now as I mentioned, this is a bolt on application. However, this also can be welded on.This particular jack is going to be a top handle jack, or a top handle crank, so cranking it up or down is going to go from the top. more


Watch Video

12/6/2019 12:32:57 PM



Extreme Off-Road Trailer Jack Manufacturer Demo- Video

Extreme Off-Road Trailer Jack Manufacturer Demo

more


Watch Video

12/4/2019 7:27:05 AM



Review of Bulldog Trailer Jack - A-Frame Jack - BD1700100301- Video

Review of Bulldog Trailer Jack - A-Frame Jack - BD1700100301

more


Watch Video

11/4/2019 10:32:28 AM



Review of Bulldog Jack - Swivel Jack - BD151159- Video

Review of Bulldog Jack - Swivel Jack - BD151159

Michael: Hi there. I'm Michael with etrailer.com. Today we're taking a look at the Bulldog round weld on jack. This is a manual side wind jack. It's going to have a lift capacity of 2000 pounds and a static capacity of 3000 pounds.I'm going to give you a few measurements here to help you decide if this is going to be the right jack for you. So you can see our mounting bracket here on the back from the center of that bracket down to the bottom of our foot. more


Watch Video

10/14/2019 2:27:34 PM



Review of Dutton-Lainson Trailer Jack - DL22507- Video

Review of Dutton-Lainson Trailer Jack - DL22507

Today we're going to take a look at the Dutton-Lainson bolt-on rigid mount marine jack with 1,000 pound lift capacity. Now this Dutton-Lainson side wind rigid mount jack is a back saver when it comes to hitching and unhitching your trailers. It's a heavy duty tongue jack that will reduce the physical effort that's needed to maneuver a loaded trailer into hitching position or just to remove from the vehicle. It is very easy to install. It is a bolt-on mount application. It is designed for trailer tongues up to 25" from the ground and this tongue jack can be mounted in a variety of positions on various sized trailer tongues. more


Watch Video

9/9/2019 10:12:16 AM



Fulton XLT Powered Drive Trailer Jack Review- Video

Fulton XLT Powered Drive Trailer Jack Review

Randy: Hey guys, it's Randy here at etrailer.com.Now when it comes to marine jacks finished quality is a big issue and also lift capacity. What we're taking a look at today is the Fulton XLT marine jack. This is a fixed jack so you see we've got a fixed mount in here. And something that's different than a lot of the other marine jacks out there, it's going to have a drop leg on the bottom. The reason I like this is that when retracted and when we've got that drop leg up it's right up here way out of the way. We don't have to worry about any swiveling or any pivoting. more


Watch Video

8/7/2019 1:17:30 PM



Fulton Sidewind XLT Bolt-Thru Swivel Trailer Jack Review- Video

Fulton Sidewind XLT Bolt-Thru Swivel Trailer Jack Review

Randy: Hey, guys. It's Randy here at etrailer.com. Today we're taking a look at a jack from Fulton that I really think you saltwater enthusiasts are going to love. Basically, they've taken their Fulton XL jack, and they've wrapped it in this Sharkskin coating. The Sharkskins coating is a 1200 hour saltwater tested coating with a matte silver finish. Essentially, this is going to protect your jack and keep it looking just like this for an extremely long period of time.Traditionally, we're used to a clear zinc coating on most of our marine jacks. more


Watch Video

7/22/2019 11:22:22 AM



Fulton Sidewind Bolt-Thru Swivel Marine Jack Review- Video

Fulton Sidewind Bolt-Thru Swivel Marine Jack Review

Randy: Hey guys, it's Randy here at etrailer.com. Now, we're always looking for solutions for different problems that our customers are going to encounter. And in the marine jack world, corrosion is an issue. Especially if you're someone that's in a saltwater environment, you can tell after a while the jack's getting older. You're starting to see the fitting, starting to see the corrosion. Now, it doesn't mean they don't work. more


Watch Video

7/22/2019 11:18:19 AM



Fulton Sidewind Bolt-Thru Swivel Marine Jack Review- Video

Fulton Sidewind Bolt-Thru Swivel Marine Jack Review

Randy: Hey guys, it's Randy here at etrailer.com.Today we're taking a look at a marine jack from Fulton. This is going to have a 1200 pound lift capacity and it's going to be pretty ideal for any of your small to medium size boats. Generally, when picking a jack out, you're going to look to the weight of your boat and trailer combo, and then you can figure on about 15% of that being the weight that you'll have on your tongue.This one, being at 1200 pounds, it's going to give us plenty of tongue weight for even the larger boats, but it's always a good idea, if you do have a large boat, you get something more heavy duty, get one in that 2000 or that 2500 pound range, because if we have our jack just rated higher than what our trailer's weight actually is, it's going to last longer and it's easier to use.Now this jack, in particular, is ideal in any marine application, but especially in saltwater applications. This has the Z600 finish on it. It's a superior, zinc coating than what we see on a lot of the standard marine jacks. Essentially it's been tested at 600 hours in the saltwater spray. more


Watch Video

7/22/2019 11:17:44 AM



Review of Ark Trailer Jack - Side Frame Mount Jack - ORJW1SU- Video

Review of Ark Trailer Jack - Side Frame Mount Jack - ORJW1SU

Today, we're going to take a look at the Ark Xtreme Off-road ratcheting sidewind trailer jack with the single wheel. Now, this Xtreme Off-road series ratcheting trailer jack is perfect for anyone who needs a swivel wheel trailer jack that can handle the elements and the off-road conditions. Now, this off-road jack will support, lift, and lower your boat or recreational trailer. This one happens to include the ratcheting wheel with an extended ratchet arm, which increases maneuverability in any rough terrain, offers four functions, forward, reverse, neutral, and stop, and lock. The ratchet arm is removable if you need to remove it. Has a knob here, you can just pull out, spring loaded knob. more


Watch Video

7/19/2019 12:12:15 PM



Review of Ark Trailer Jack - Side Frame Mount Jack - ORJW750BD- Video

Review of Ark Trailer Jack - Side Frame Mount Jack - ORJW750BD

Today we're going to take a look at the Ark Extreme off-road sideline trailer jack with the dual wheels and this is the black edition model. Now this black edition, extreme off-road series trailer jack is perfect for anyone that needs a swivel wheel trailer jack that can handle the elements and off-road conditions. This off-road jack will support, lift, and lower your boat or recreational trailer. It does use the heavy square, heavy duty square tubing, provides increased load capacity, and it gives it a very high load rating as a 1,650 pound static load rating and a 1,100 pound dynamic load rating. That means that it won't bend the minute you try to use it in mud or on a trail.Right over here it has a spring loaded handle. You just flip it up like that and then you can pull it, it's spring loaded and so that lets you easily swing the jack up in place. more


Watch Video

7/19/2019 9:57:16 AM



Review of Ark Trailer Jack - Side Frame Mount Jack - ORJW750D- Video

Review of Ark Trailer Jack - Side Frame Mount Jack - ORJW750D

Today, we're going to take a look at the Ark extreme off-road sideline trailer jack with the dual wheels. Now, this is an extreme off-road series trailer jack. It's perfect for anyone who needs a swivel wheel trailer jack that can handle the elements in any off-road conditions. This off-road jack will support, lift and lower your boat or recreational trailer. It uses heavy duty square tubing which provides increased load capacity. It does have a very high load rating, has a 1,650 pound static load capacity and a 1,100 pound dynamic load capacity, meaning it won't bend the minute you try to use it in any mud or on the trail. more


Watch Video

7/18/2019 3:57:37 PM



Review of Ark Trailer Jack - Side Frame Mount Jack - ORJW500D- Video

Review of Ark Trailer Jack - Side Frame Mount Jack - ORJW500D

Today we're going to take a look at the Ark Extreme Off-Road sidewind trailer jack with the dual wheels. Has 1,100-lb lift capacity. Now, this is an Extreme Off-Road series trailer jack. It's perfect for anyone who needs a swivel wheel trailer jack that can handle the elements. This off-road jack will support, lift, and lower your boat or recreational trailer. Uses a nice heavy duty square tubing on it to provide increased load capacity. more


Watch Video

7/17/2019 2:32:18 PM



Review of Ark Trailer Jack - Side Frame Mount Jack - ORJW350D- Video

Review of Ark Trailer Jack - Side Frame Mount Jack - ORJW350D

Today we're going to take a look at the Ark Extreme Off-Road Sidewind Trailer Jack with the dual wheels and a 770 pound lift capacity. Now this is an Extreme Off-Road Series Trailer Jack. It's perfect for anyone who needs a swivel wheel trailer jack that can handle the elements. This off-road jack will support lift and lower your boat or recreational trailer. Uses heavy duty square tubing, provides increased load capacity, has a very high load rating, meaning it won't bend the minute you try to use it in the mud or on the trail. Does have this nice convenient spring loaded handle right over here that'll let you easily swing the jack in place. more


Watch Video

7/17/2019 2:02:19 PM



Review of etrailer Trailer Jack - Side Frame Mount Top Wind Jack - TJD-8000- Video

Review of etrailer Trailer Jack - Side Frame Mount Top Wind Jack - TJD-8000

Today we'll be taking a look at the Square Direct-Weld Jack with Footplate. This top-line style jack is going to help us lift and lower our trailer whenever we're ready to use it, or unload and reload.So flip the handle up and operate that jack. It has a nice easy-to-grip handle here. So it's a pretty nice wide handle. You can get a good grip on there to wind your jack up or down. This is going to have a lift capacity of 7,000 pounds and a static capacity or support capacity of 8,000 pounds. more


Watch Video

7/2/2019 10:27:22 PM



Review of etrailer Trailer Jack - Side Frame Mount Jack - TJD-8000S- Video

Review of etrailer Trailer Jack - Side Frame Mount Jack - TJD-8000S

Today we'll be taking a look at the Square Direct Weld Jack with Footplate. This jack is going to help us lift and lower our trailer, so that we can get it supported and leveled off whenever we need to go and hook up to our vehicle again. It's made of a durable construction. Our top piece, the handle, the inner tube and our footplate all have a zinc coating to help resist any kind of rust or corrosion. The footplate is welded in place, so it's going to be nice and secure and that's going to give us some additional lift with this jack since we'll have five different adjustment points and those are each about three and a half inches apart. To adjust those you'll just pull the clip on the one side here, pull out that pin and then that drop leg will adjust down.Let me get my pin put back in and then we'll go over some measurements for the jack. more


Watch Video

7/2/2019 10:17:27 PM



Pro Series Snap-Ring Swivel Marine Jack Review and Installation- Video

Pro Series Snap-Ring Swivel Marine Jack Review and Installation

Jake: Hey guys, it's Jake here with etrailer. Today we're going to be taking a look and I'm going to show you how to install the Pro Series Marine Trailer Jack. This is going to be a great replacement or if you're building a trailer and you need an option for a good jack to put on your trailer to be able to get it on and off your vehicle. This is going to allow you with this swiveling wheel on the bottom to be able to tote your trailer around without your boat loaded.Here's an example of something that can happen if you forget to put your jack up before you take off. This customer had a wheel that was bent so they needed a nice replacement along the same style and weight capacity of their old one. As you can see here, the kit will come with a bracket and the mounting hardware to be able to mount it on your trailer.Our trailer does have the snap marine mount here still available for us to use, but if it gets damaged when you're jack got damaged you'll have the brackets and everything to put your jack in place. more


Watch Video

6/18/2019 11:18:28 AM



Dutton-Lainson Round Swivel Jack Review- Video

Dutton-Lainson Round Swivel Jack Review

Jake: Hey guys, Jake here with etrailer. Today we're going to be taking a look at the Dutton-Lainson premium pivoting tongue jack. This jack is going to help you to be able to jack up your trailer to get it onto your vehicle and store in a nice, convenient stored position when you're traveling.Something you're going to notice right away when you see this jack is it's going to have a more aggressive look to it than your standard jack that might come factory on your trailer. It's going to have a nice dark charcoal gray powder coat finish that'll be tough enough to withstand any dents or scratches that might come to it. The wheel is going to be eight inches in diameter, so it's going to be more than tall enough to be able to roll over those larger objects that might be in your yard. As well as it's going to be three inches wide so that when you're rolling your trailer through your yard it's not going to sink down into the grass as easily as those two inch wide wheels.The jack is going to have a 1,500-pound weight capacity and a travel of 12 inches. more


Watch Video

6/17/2019 10:47:51 AM



Dutton-Lainson Square Swivel Jack Review- Video

Dutton-Lainson Square Swivel Jack Review

Jake: Hey, guys. Jake here with etrailer. Today, we're going to be taking a look at and I'm going to show you how to get in place the Dutton-Lainson Square Tube Pivoting Tongue Jack. You're going to be able to take this jack up with two different support orientations. You're going to have a wheel on our left here and a foot pack on the one on our right. The foot pack is going to be better for those applications on a trailer that's too heavy to be able to roll around anyway, so you get the foot pack and it'll stay planted on the ground. more


Watch Video

6/17/2019 10:47:26 AM



Review of Dutton-Lainson Side Frame Mount Trailer Jack - Sidewind Square Jack - DL22340- Video

Review of Dutton-Lainson Side Frame Mount Trailer Jack - Sidewind Square Jack - DL22340

Today, we'll be taking at look at the Dutton Lainson Square Swivel Jack with Foot Plate. This is going to have a foot plate, rather than a wheel, for those instances where we have a trailer that's really too hard to move because it's just too heavy, so we'd rather have a foot plate to keep our jack from sinking straight into the ground. It's going to help to disperse out that weight and it does have some ability to help adjust for any uneven terrain or unlevel ground, so we can get it leveled out and it'll stay secure.If we look at the bottom of that plate, it's not really level. It kind of has a little bit of a mound to it, but it's a nice heavy-duty foot plate. So again, it's going to help to disperse that weight out and keep it from sinking into the ground.It's a sidewind-style jack, so we'll have our handle to the side. It has a nice ergonomic grip to make it easy to grab onto. more


Watch Video

6/5/2019 4:42:16 PM



Review of Dutton-Lainson Side Frame Mount Trailer Jack - Sidewind Square Jack - DL22339- Video

Review of Dutton-Lainson Side Frame Mount Trailer Jack - Sidewind Square Jack - DL22339

Today we'll be taking a look at the Dutton Lainson Square Swivel Jack with three inch wide wheel. This is going to be a great addition to your trailer to get your vehicle, or to get your trailer lifted and lowered onto your couplers so you can tow your trailer.It's a sidewind jack, has a nice, comfortable ergonomic style handle. It's got this grip here that's kind of a soft rubber material or soft plastic material to give it a nice, easy grip. Even if your hand is a little bit bigger than mine, you'll still have plenty of room to get your hand on there and crank away. There's a square tube and on the back we'll have this bracket that mounts up to our trailer. This works with three to five inch tall trailer frames and this is just a bolt-on application. more


Watch Video

6/5/2019 4:37:18 PM



Review of Dutton-Lainson Side Frame Mount Trailer Jack - Sidewind Round Jack - DL22335- Video

Review of Dutton-Lainson Side Frame Mount Trailer Jack - Sidewind Round Jack - DL22335

Today we'll be taking a look at the Dutton-Lainson Round Swivel Jack with 3" Wide Wheel. This is going to be a side-wined jack for your Marine trailer, or really any trailer that you'd want to use this on. It's going to be a very nice looking, heavy-duty jack. We'll have an ergonomic handle, again to run that up and down.A large swivel wheel so we can easily maneuver our trailer and get it positioned in the right spot. Then we'll have our bracket here at the back so that we can pull the pin and then swing that jack up. It's a little awkward for me to do this with it rolling around. more


Watch Video

6/5/2019 4:22:24 PM



Review of Bulldog Trailer Jack - Side Frame Mount Jack - 150010- Video

Review of Bulldog Trailer Jack - Side Frame Mount Jack - 150010

Today we're going to take a look at the Bulldog round side wind jack without a mount and a 10 inch lift and a 2000 pound weight capacity. Now, this jack is a nice, durable, heavy gauge construction. The outer and the inner tubes overlap for nice additional strength when the jack's fully extended. They do use a weather-resistant coating on the outer tube and a zinc finish on the inner tube. It does offer a screw nut stop that'll prevent damage to the screw and/or the nut when this jack is fully extended.You notice it does have the side wind handle for a nice, smooth, ergonomic design for easy cranking. And also right up here by the handle, you can see they have a grease Zerk fitting that allow for easy lubrication of the bearings. more


Watch Video

5/3/2019 8:39:34 AM



Dutton-Lainson Round Swivel Marine Jack Review- Video

Dutton-Lainson Round Swivel Marine Jack Review

Randy: Hey guys, Randy here at etrailer.com. Today we're taking a look at a new marine jack from Dutton-Lainson.This jack really is very impressive to me. I like just about everything there is about it. It has a nice tough coat finish here on the outside, some really good protection areas like where our tubes come together here, and I like the nice large wheel. It has a great handle on it. We're gonna take a closer look at some of these features plus figure out if it's gonna work for your application or not.To start with, what really stands out on this jack compared to a lot of the other marine jacks that I've handled, is just the feel of the quality. more


Watch Video

4/9/2019 11:17:52 AM



Review of Fulton Trailer Jack - Side Frame Mount Jack - F1413050334- Video

Review of Fulton Trailer Jack - Side Frame Mount Jack - F1413050334

Today we're going to take a look at the Fulton F2 side-wind swing up wide track trailer jack with the eight-inch single wheel and a 1,600 pound weight capacity. This is a nice, maintenance-free corrosion resistant jack. It's made for marine, recreational and utility trailers, uses a lubricated one piece gear box right up here at the top that eliminates the need for manual lubrication. It does have a ventilation port that allows you to add extra grease if desired. It has a nice anodized finish on both the inner and outer aluminum alloy tube to prevent rust even in the harshest environment. It has a side-wind handle here, it's made of a strong plastic for durability, ease of use and a very wide wheel base that allows for increased stability. more


Watch Video

3/18/2019 2:54:54 PM



Lippert Quick Drop Tongue Jack Review- Video

Lippert Quick Drop Tongue Jack Review

Hey guys, we're going to be here at etrailer. Today, we're going to be taking a look at Lippert components quick drop jack. This is designed for A frame trailers and just by looking at it, it looks like any standard manual jack. This one though, it's got a little trick up its sleeve, that I really like. Using a manual or a power drill, with 19 mm socket, we're actually able to operate our jack up and down.While this is going to save us a lot of money over the normal power jacks, we're not going to have to deal with the maintenance and things like that, that we're generally used to. We also don't have to worry about having a battery onboard. more


Watch Video

2/12/2019 11:12:12 AM



Lippert Quick Drop Tongue Jack Manufacturer Review- Video

Lippert Quick Drop Tongue Jack Manufacturer Review

more


Watch Video

1/14/2019 12:32:11 PM



Review of Bulldog Trailer Jack - A-Frame Jack - BD150037- Video

Review of Bulldog Trailer Jack - A-Frame Jack - BD150037

Today we're gonna take a look at the Bull Dog A-frame jack. This is gonna be a top wind style with a max lift rating of 2,000 pounds. Now, Bull Dog is gonna be a very trusted name in the industry. They're gonna be a great jack for multiple agricultural and commercial applications. It's going to have that top wind grip. As you can see, we have our red handle. more


Watch Video

1/8/2019 8:50:33 PM



Lippert Components Trailer Jack - A-Frame Jack - LC733926 Review- Video

Lippert Components Trailer Jack - A-Frame Jack - LC733926 Review

Speaker 1: Today we're taking a look at the Lippert quick drop tongue jack. Now this utility jack lets you raise and lower your A-frame trailer. This is perfect for agricultural and commercial applications. The mount holes on the mounting bracket make a triangular shape, with each hole separated on center by around 3" from the other. Mounting hardware not included. It does feature a lift capacity of 2,000 pounds.Now this unit features a topwind handle. more


Watch Video

12/3/2018 8:25:27 AM



etrailer Round Snap Ring Swivel Jack with Footplate Review- Video

etrailer Round Snap Ring Swivel Jack with Footplate Review

Speaker 1: Today, we'll be having a look at the etrailer.com Round Snap Ring Swivel Jack with Footplate, part number: TJBB-2001-B. With the etrailer.com jack installed, we'll no longer need to worry about using a jack stand or other device to hold our trailer coupler off the ground now. Our landing gear makes contact with the ground which will keep our coupler off the ground.One thing that I like about it is how easy it is to use. With our folding arm here, we can easily crank to raise our jack which will then raise our coupler higher off the ground or off our trailer ball. We have quite a bit of range of motion here, which makes it easy to couple and uncouple to multiple different vehicles which may or may not have a different hitch height on them.One thing's that great is that it is a folding design. So, when we're coupled up to a vehicle to help reduce the interference from the ground or potentially running our jack into something. more


Watch Video

11/16/2018 10:07:12 AM



Buyers Products A-Frame Jack with Support Foot Review- Video

Buyers Products A-Frame Jack with Support Foot Review

Speaker 1: Today we're going to take a look at, and show you how to install, the Buyer's A-Frame Trailer Jack with Support Foot. This is a 2000-pound jack, offering 15 inches of travel. The part number is 3-3-7-0-0-9-1-2-6-0. Now, this A-frame coupler jack is going to offer a 2000-pound weight rating. That's going to be the maximum lifting force the jack is going to offer for us. Lighter enclosed trailers, smaller utility trailers, things like that, that's typically where you're going to see this at. more


Watch Video

10/25/2018 12:27:27 PM



Fulton Trailer Jack - Side Frame Mount Jack - F1413040134 Review- Video

Fulton Trailer Jack - Side Frame Mount Jack - F1413040134 Review

Speaker 1: Today we're taking a look at the Fulton F2 swing-up trailer jack. This jack bolts to your trailer frame and allows you to easily raise and lower your trailer. The weight capacity for this jack is 1600 pounds. It's covered with a lifetime limited warranty.This unit features a nice pivoting wheel that allows you to easily move your trailer around. One of the neat things about this system is that the wheel pivots without rotating the handle. If you've ever had a trailer jack with a wheel assembly on it, traditionally, when the wheel rotates, the handle rotates because there's both connected to an inner tube. more


Watch Video

10/22/2018 8:40:15 AM



Bulldog Trailer Jack - Side Frame Mount Jack - BD190758 Review- Video

Bulldog Trailer Jack - Side Frame Mount Jack - BD190758 Review

more


Watch Video

10/15/2018 9:03:31 PM



Buyers Products A-Frame Jack with Support Foot Installation- Video

Buyers Products A-Frame Jack with Support Foot Installation

Speaker 1: Today we're going to be taking a look at the Buyers Products A-Frame Jack with Support Foot. The part number is 3370091265. Now, this jack from Buyers has been designed to either replace an already existing 5,000 pound jack, or it can also be used for an upgrade, if maybe your trailer has a 2,000, 2500, 3,000 pound jack on it, and you just want something a little more robust, this is going to do an excellent job.It has a top-wind design. You can see that here. I generally prefer that as opposed to the side-wind. It's kind of easier just to do it in this fashion, I think. more


Watch Video

10/10/2018 9:47:12 AM



Dutton-Lainson Trailer Jack - Side Frame Mount Jack - DL22686 Review- Video

Dutton-Lainson Trailer Jack - Side Frame Mount Jack - DL22686 Review

Presenter: Today we're taking a look at a trailer jack. Now this jack mounts to your trailer frame. It offers a 2,000 pound capacity and allows you to easily raise and lower your trailer. Again, it mounts to the side of your trailer tongue, and comes with the weld on bracket and the snap ring. So both of those items are included. This bracket right here, I did take a measurement from edge to edge, and got a measurement of about four and a half inches wide. more


Watch Video

7/6/2018 8:39:17 AM



Bulldog Trailer Jack - Side Frame Mount Jack - BD1823050383 Review- Video

Bulldog Trailer Jack - Side Frame Mount Jack - BD1823050383 Review

Speaker 1: Today we're taking a look at a Bulldog square jack. This jack has a lift capacity of 45,000 pounds and a static capacity of 90,000. It's ideal for horse, livestock, and heavy duty trailers. You can use this in tandem with Bulldog heavy duty two speed jack for landing gear applications. That jack is sold separately and available at etrailer.com.This jack is made from a durable steel construction. It features a black paint finish. more


Watch Video

6/21/2018 7:35:48 AM



Dutton-Lainson Trailer Jack - Side Frame Mount Jack - DL22210 Review- Video

Dutton-Lainson Trailer Jack - Side Frame Mount Jack - DL22210 Review

Speaker 1: Today we're taking a look at the Dutton-Lainson round swivel marine jack. Now this marine jack lets you raise and lower your boat or recreational trailer. It features a lift capacity of 1,500 pounds and it features a swivel design which lets you swing the jack up along the trailer frame for easy and convenient storage and then bring it back down when you're ready to use it. It has this spring loaded pull pin right here. This is very easy and comfortable to control and operate. So you pull that and it allows the jack to swivel apart from the plate. more


Watch Video

5/22/2018 11:35:21 AM



Buyers Products Trailer Jack - Side Frame Mount Jack - 3370091610 Review- Video

Buyers Products Trailer Jack - Side Frame Mount Jack - 3370091610 Review

Speaker 1: Today we're taking a look at a swing away marine trailer jack. This swing away marine jack has unique qualities that make it ideal for marine trailers. It has a 1,000 pound lift capacity. It has a 6-inch diameter wheel that allow for easy maneuvering of your trailer, and that does swivel without rotating the handle.Also with at quick pull of the pin right here, this is a spring loaded pin, you could easily move the jack to a stowed position along the trailer frame. So that way it's out of the way during travel. Then you can pull that and allow it to rotate back down when you're ready to use it.We're looking a tough carbon steel construction. more


Watch Video

5/17/2018 9:29:09 AM



Buyers Products Trailer Jack - A-Frame Jack - 3370091265 Review- Video

Buyers Products Trailer Jack - A-Frame Jack - 3370091265 Review

Speaker 1: Today we're going to take a look at the A-frame Jack with the footplate, has a 15 inch travel and 5,000 pound weight capacity. Now this A-frame jack is designed to bolt right onto your A-frame coupler. Common uses and utility trailers, RV trailers, landscape trailers, has a nice weather resistant black powder-coat finish and the inner tube is a zinc finish. Has a nice top line handle here for smoother ergonomic design for easy cranking. It's in the store mode right here. If you just flip it over this way and you're in your cranking mode, makes it very easy. more


Watch Video

5/15/2018 1:34:09 PM



Buyers Products Trailer Jack - A-Frame Jack - 3370091260 Review- Video

Buyers Products Trailer Jack - A-Frame Jack - 3370091260 Review

Speaker 1: Today we're taking a look at a A-frame trailer jack with the included foot plate. This A-frame jack is designed to bolt onto an A-frame trailer coupler, so it has the standard mount hole pattern right here, so three mount holes. Now, mounting hardware's not included, but again, it is designed for an A-frame trailer, A-frame coupler, mounting hardware sold separately.It does feature a nice ergonomic top-wind design when it comes to the handle, so it makes it very easy to extend and retract the unit. The handle can be folded over and out of the way when it's not in use. It features a 15-inch travel with a weight capacity of up to 2,000 pounds, and it does come with the included foot plate.Now, the foot plate is great for spreading out the applied weight, especially on softer surfaces, to prevent sinking. The jack is made from a durable steel construction. more


Watch Video

5/15/2018 12:39:23 PM



Buyers Products Trailer Jack - Side Frame Mount Jack - 3370091415H Review- Video

Buyers Products Trailer Jack - Side Frame Mount Jack - 3370091415H Review

Speaker 1: Today we're taking a look at a heavy-duty four-inch square jack with a front pin drop leg. The front-pin heavy-duty square jack features a spring return drop leg that allows easier expanding and retracting. This is a weld-on installation. The spring return is activated by pulling a sturdy front-mounted pin to drop the leg and also to retract the leg. Now when doing that, it is spring-loaded, so you definitely want to keep your hands clear of that area, because it moves very fast. So you can pull this, rotate it to the side, and then that allows the unit to retract, and then that's also how you use to extend it as well. more


Watch Video

5/2/2018 8:15:15 AM



Buyers Products Trailer Jack - Side Frame Mount Jack - 3370091410H Review- Video

Buyers Products Trailer Jack - Side Frame Mount Jack - 3370091410H Review

Speaker 1: Today we're taking a look at a Heavy Duty Four-Inch Square Jack with the side-pin drop leg. Now the side-pin heavy duty square jack features a spring return drop leg that allows easier expanding and retracting. So the spring return is activated by pulling this sturdy side mounted pin to drop or extend the leg. It's a really nice design. It's also how you retract it, so when you're ready to retract it, you pull this, and the leg will go back up into the outer tubes here. Keep your hands clear when you do that, because it is spring return, so that will engage very, very quickly.Now this type of jack is ideal for RV's, construction trailers and tri-axle trailers. more


Watch Video

5/1/2018 10:05:21 AM



TrailerLegs Trailer Jack - Storage Jack - 326-TRLLG-6 Review- Video

TrailerLegs Trailer Jack - Storage Jack - 326-TRLLG-6 Review

Speaker 1: Today we're gonna take a look at the TrailerLegs tire saver stands for triple axle trailers for a quantity of six stands. Now, these stands will protect and prolong the life of your trailer tires by keeping them up off the ground while your trailer's not in use. It eliminates any flat spots from prolonged periods of your tires bearing the trailer weight, so it will store your tires off the ground so they stay round.Basically, just place these durable stands on both sides of the axle. Use your vehicle to pull the trailer up onto the stands. One set, or two stands, is needed for each axle. These will also work great for camping trips because they're super stable. more


Watch Video

4/3/2018 3:08:26 PM



TrailerLegs Trailer Jack - Storage Jack - 326-TRLLG-4 Review- Video

TrailerLegs Trailer Jack - Storage Jack - 326-TRLLG-4 Review

Speaker 1: Today we're going to take a look at the Trailer Legs Tire Saver Stands for a tandem axle trailer. This is for a quantity of four stands. Now these stands will protect and prolong the life of your trailer tires by keeping them up off the ground while your trailer's not in use. It'll eliminate any flat spotting from prolonged periods of your tires baring the trailer weight, and allow you to store your tires off the ground so that they stay round.Basically just place these durable stands on both sides of the axles. Use your vehicle to pull the trailer up onto the stands. It requires one set or two stands for each axle. more


Watch Video

4/3/2018 2:55:21 PM



Bulldog A-Frame Top Wind Jack Review- Video

Bulldog A-Frame Top Wind Jack Review

Speaker 1: Today we're going to be taking a look at the Bulldog A-Frame Trailer Jack, the part number is BD175000. Now this Bulldog jack is going to be a really great solution for most A-Frame trailers. It has a 5,000 pound lifting capacity and a 7,000 pound static capacity, which means 7,000 pounds would be the maximum force that you want to put downward on the jack. But overall it's going to be a nice sturdy jack to use. I like the top wind design. Essentially, this is going to give us a direct connection to the screw inside that raises and lowers the jack. more


Watch Video

4/3/2018 2:20:15 PM



Bulldog Round A-Frame Jack Review- Video

Bulldog Round  A-Frame Jack Review

Speaker 1: Today, we're going to be taking a look at the Bulldog round A-frame trailer jack with the top wind design. The part number is BD155032. Now, here you can see our jack fully extended. We've got 15 inches of total travel, and as you can see, it allows us to create quite an angle on our trailer. So a utility trailer, it's not such a big deal, but on some of the enclosed trailers and other types of trailer, you might not want water building up in the rear. So being able to elevate it will allow that to all kind of run out.Now, our top wind jack's designed to give us 5,000 pounds of lifting and holding capacity. more


Watch Video

4/3/2018 2:19:49 PM



Bulldog Round A-Frame Jack with Caster Review- Video

Bulldog Round A-Frame Jack with Caster Review

Speaker 1: Today we're going to be taking a look at the Bulldog Round A-Frame Jack with caster. This is a top-wind jack. Part number is BD155300.This A-frame trailer jack has a 1000-lb. lift capacity. Customers will like that it includes a caster. The caster's going to make it easier to maneuver your trailer. more


Watch Video

3/7/2018 3:15:16 PM



Fulton Trailer Jack - Side Frame Mount Jack - F141401 Review- Video

Fulton Trailer Jack - Side Frame Mount Jack - F141401 Review

Speaker 1: Today we're taking a look at the Fulton XLT Powered Drive Trailer Jack. This jack is ideal for marine applications and lets you lift and lower your trailer quickly and easily. It is designed for 12-volt systems and it features a capacity of 2500 pounds. It features a sealed, maintenance free motor, and on the exterior surfaces, we have what's called self-healing shark skin. It's just a specific type of finishing on the unit which does a great job at protecting it from scratches and abrasions. Also keeps it safe from rust and corrosion, and that shark skin finish offers a 1200-hour salt spray rating on the exterior jack surfaces, so it's ideal for use on a boat or inaudible 00:00:40 trailers and it is durable enough for saltwater applications.The unit also features clear ZMAX finishing, which offers a 600-hour salt spray rating on the internal components. more


Watch Video

2/16/2018 7:55:32 AM



Fulton F2 Swing-Up Jack Review- Video

Fulton F2 Swing-Up Jack Review

Speaker 1: Today we're gonna be taking a look at the Fulton F2 Swing-Up Jack with pivoting footplate. It's available to fit a four to five inch frame in a bolt on style with part number F1413230134. For five inch frames in a weld on style with part number F1413200334. For four inch frames with a bolt on pattern with part number F1413210334.This heavy duty, adjustable jack is a solution for many different trailer sizes. The 2,000 pound weight capacity is gonna be great for boat trailers, utility trailers, and some enclosed trailers. The articulating footplate is gonna make it easy to use even on uneven ground and the swing-up feature's great after you've got your trailer hooked up and now you're ready to go down the road.It has 10 inches of adjustable travel from the bottom of the jack to the top of the footplate and with the footplate installed you get about 13 inches of total lift. more


Watch Video

1/3/2018 12:22:37 PM



Bulldog Round Snap-Ring Swivel Jack Review- Video

Bulldog Round Snap-Ring Swivel Jack Review

Speaker 1: Today, we're going to be taking a look at the Bulldog, round snap ring spool jack. Part number: BD151464. This also comes into an 11" retractable with part number: DB151460. It extends to a maximum of 31". This makes using your trailer with lifted vehicles, no problem with that extra height.It will retract down to 16". Once you're connected to your vehicle, you can simply fold your handle, pull the pin. more


Watch Video

12/22/2017 11:57:42 AM



  1     2     3