Spare Tire Carrier Installation And Review Videos


CargoSmart Spare Tire Holder Review- Video

CargoSmart Spare Tire Holder Review

Jake: Hey guys. It's Jake here at etrailer. Today I'm going to be showing you a little bit more about the CargoSmart spare tire holder for E-track and X-track.Now the nice part about this spare tire holder is that you can move it wherever you have in E-track system or an X-track system. You can move it to get it off the floor and up on your wall or secured safely onto your floor.So with this mount, your spare tire is going to be mounted on the inside of your trailer, on your E-track. It's not going to be mounted on the outside of your trailer like other spare tire holders are. So when you leave your trailer unintended, you're not going to have to worry about your spare tire being stolen.So when it comes time to use your spare tire, you just simply take a 19 millimeter wrench, loosen that nut and then spin the nut off. more


Watch Video

4/23/2019 1:27:14 PM



Review of Fulton Spare Tire Carrier - Frame Mount - FETC0101- Video

Review of Fulton Spare Tire Carrier - Frame Mount - FETC0101

Today we're taking a look at a Fulton spare tire carrier. Now, this spare tire carrier allows you to easily carry one spare tire on your trailer. It's very easy to install. This simply just wraps around the framing of your trailer, and then your wheel goes over the threaded areas here, so each threaded post needs to go through a wheel stud hole, and then you secure it in place by installing both of the included nuts.It's a heavy-duty half-inch diameter steel construction, has a zinc-plated finish to resist rust and corrosion. This will fit eight-inch, nine-inch, 12-inch, 13-inch, 14-inch, or 15-inch wheels with a four or five-lug rim. It will fit around a three-inch wide trailer frame. more


Watch Video

3/1/2019 7:40:18 AM



Buyers Products Stake Pocket Spare Tire Carrier Review- Video

Buyers Products Stake Pocket Spare Tire Carrier Review

Today, we're going to be taking a look at Buyers stake pocket spare tire carrier. This stake pocket mounted spare tire carrier is designed to hold wheels with a 5 on 5, 6 on 5-1/2, or 8 on 6-1/2 inch bolt pattern. It fits in a 3-1/2 to 3-3/4 inch stake pocket.What's really nice about this setup is that you can mount in any of the stake pockets on your trailer, so depending on the load that you have, that you commonly use, you can put that tire in the most appropriate location where it's out of your way, but there when you need it. It's a solid steel construction with a black powder coat finish. This will help protect it from any rust and corrosion. The angled design keeps your spare tire up and away from your trailer, ensuring you have good clearance. more


Watch Video

1/28/2019 11:02:27 AM



Review of Brophy Spare Tire Carrier - Stake Pocket Mount - SPTC- Video

Review of Brophy Spare Tire Carrier - Stake Pocket Mount - SPTC

Today, we're taking a look at the Brophy Trailer Stake Pocket Spare Tire Carrier. This unit allows you to mount your spare tire up and out of the way. The base of the carrier simply inserts into a standard two by four stake pocket on your trailer. Mounting hardware is included, so you place this into the stake pocket on your trailer.Then, you secure it in place by taking the mounting plate, take a bolt through the mounting plate, and then you thread it into the nut that's welded onto the base right here. Then, what you do is you just tighten that up until the mount plate is secure to the bottom of the stake pocket on your trailer. Installation is very quick, very easy, very simple.Then, right here, we have the actual plate where we're going to mount the spare tire and wheel assembly. more


Watch Video

1/7/2019 9:35:35 AM



CE Smith Spare Tire Carrier CE27201 Review- Video

CE Smith Spare Tire Carrier CE27201 Review

Today we're taking a look at the CE Smith Spare Tire Carrier. This is a U-bolt style carrier that provides a mounting point for your trailer's spare tire. It simply installs on your trailer's frame, tongue, or rails. It comes with these lockable brackets that thread onto the thread portion of the U-bolt. They come together and allow you to install a padlock, that way you can deter theft of your spare tire.The U-bolt clamps around your trailer frame and inserts through the bolt holes of your spare's wheel. The brackets thread onto the U-bolt and snug up against the wheel to hold it in place and then you would use a padlock to lock the brackets together so they can't be removed from the U-bolt.Padlocks are sold separately. more


Watch Video

12/31/2018 2:30:18 PM



CE Smith Spare Tire Carrier CE27202 Review- Video

CE Smith Spare Tire Carrier CE27202 Review

Today we're taking a look at the CE Smith's Spare Tire Carrier with Lock. This U-Bolt style carrier provides a mounting point for your trailer spare tire. It installs on your trailer's frame, tongue, or rails, and it has the lockable brackets that deter theft of your spare tire when used in conjunction with the included Master Lock. It comes with the padlock. It comes with a couple keys. That way you can have one for use and then maybe have a spare.But basically, the U-bolt clamps around your trailer frame, and then you would insert the ends through the bolt holes of your spare's wheel. more


Watch Video

12/27/2018 3:11:53 PM



Buyers Products Spare Tire Carrier - Stake Pocket Mount - 3375201012 Review- Video

Buyers Products Spare Tire Carrier - Stake Pocket Mount - 3375201012 Review

Today we're taking a look at the Buyers Product Stake Pocket Spare Tire Carrier. Now, this unit allows you to easily mount and secure a spare tire to your vehicle or trailer. It's made from a durable steel construction and it features a black powder coated finish on it to help resist rust and corrosion.Now, this is designed to fit into most standard stake pockets from 3 1/2" to 3 3/4" wide. It fits wheels that have a 5 on 5", 6 on 5 1/2", and 8 on 6 1/2" bolt pattern, and what this does is it fits into your stake pocket and, as you can see, it has a really nice offset to it, so it moves your spare tire 6 1/2" out and 7 1/2" up from the stake pocket for extra clearance.Installation is very quick and very easy. All you've got to do is place the unit in the stake pocket, and then you add the security plate to the bottom of the stake pocket and attach it to the spare tire carrier with the included bolt. It threads into the threaded attachment hole right here and that keeps it secure in the stake pocket.Then, you pick the studs that best fit your wheel size and install them into the appropriate holes on the carrier, place your spare over the studs, and secure with the included lug nuts, and that's all there is to it.That's going to do it for today's look at the Buyers Product Stake Pocket Spare Tire Carrier.. more


Watch Video

12/10/2018 9:40:35 AM



Buyers Products Spare Tire Carrier - Truck Mount - 3375201010 Review- Video

Buyers Products Spare Tire Carrier - Truck Mount - 3375201010 Review

Speaker 1: Today we're taking a look at the Buyers Products spare tire carrier.This spare tire carrier holds tires with 19 1/2 inch diameter rims or smaller. The carrier can be bolted or welded on, depending on your vehicle. This type of carrier is really popular for work trucks, construction vehicles, semi trucks, and delivery trucks.It does come with the oversized wing nut, which makes securing and unloading tires quick and easy. It's constructed of 14 gauge steel. The universal thick carrier has a corrosion resistant black powder coated finish. It's made in the USA.A few measurements I want to mention for you real quick. more


Watch Video

11/15/2018 11:00:07 AM



Erickson Spare Tire Carrier - Frame Mount - EM77316 Review- Video

Erickson Spare Tire Carrier - Frame Mount - EM77316 Review

Speaker 1: Today we're taking a look at the Erickson Spare Tire Trailer Tire Bracket Kit. This bracket kit holds a spare tire and wheel assembly in your truck bed, open trailer, or enclosed trailer. It's a really nice design. It's a nice compact design so it keeps the assembly upright and frees your truck or trailer up for other gear. We're looking at a durable steel construction with a bright zinc finish to resist rust and corrosion. It is a bolt on installation. more


Watch Video

11/5/2018 12:35:11 PM



CargoSmart Spare Tire Carrier - E-Track Mount - 3481743 Review- Video

CargoSmart Spare Tire Carrier - E-Track Mount - 3481743 Review

Speaker 1: Today we're taking a look at the CargoSmart spare tire holder for E-track and X-track systems. This spare tire holder snaps into your E-track or X-track system to secure a spare tire. It features a spring loaded fitting that snaps into the E-track or X-track anchor points. This can be easily moved from one E-track or X-track slot to another. It's a heavy duty steel construction with zinc finishing to resist rusting and corrosion. I did take a measurement from the base of the unit, this point here to the end of the threaded portion. more


Watch Video

11/5/2018 8:40:05 AM



MaxxTow Spare Tire Carrier Review- Video

MaxxTow Spare Tire Carrier Review

Speaker 1: Today we're going to be taking a look at the Maxxtow spare tire carrier. This has been designed for use with trailers up to a 3 inch by 5 inch frame. Part number is MT70214. This spare tire carrier is designed to give us plenty of room and still be able to take our tire along with us. With the offset design, it elevates the tire slightly. That gives us better clearance on the underside so we don't have to worry it bumping into the ground or anything like that, especially on these shorter boat style trailers.Now not only is that offset going to give us a little more height on our spare, but as you can see rather than the type that bolts right around the frame right here and just holds the tire up against it, it also gives up space and gets it out further and away from our trailer. more


Watch Video

5/17/2018 10:58:30 PM



Stromberg Carlson Spare Tire Carrier - Bumper Mount - TR-1 Review- Video

Stromberg Carlson Spare Tire Carrier - Bumper Mount - TR-1 Review

Speaker 1: Today we're taking a look at a bumper-mounted tire carrier. This spare tire carrier mounts to the bumper of your trailer or RV and provides an easy way to carry one spare tire. It is designed to fit most five, six, and eight-lug wheels. Just keep in mind that this is not for class A or class C tires, or dual rim wheels. It simply clamps onto your bumper for easy installation. Mounting hardware is included, so it has a U-bolt design that goes around your standard four-inch bumper, clamps around, the threaded portion comes back through the plated steel here through the pre-drilled holes, and then you have a split lock washer and a nut that needs to be installed. more


Watch Video

3/15/2018 1:05:18 PM



CE Smith Spare Tire Carrier - Frame Mount - CE27310G Review- Video

CE Smith Spare Tire Carrier - Frame Mount - CE27310G Review

Speaker 1: Today we're taking a look at the C.E. Smith Offset Spare Trailer Tire Carrier. This heavy duty carrier provides a mounting point for your trailer's spare tire. The offset design ensures that the tire sits farther away off the ground and sits farther away from the trailer frame. It features the nice cross U-bolt design, which reinforces strength and increases weight capacity. It comes with two sets of hardware, so you use whatever set works best for your application.This will fit trailer frames up to three and a half inches wide by up to four inches tall. more


Watch Video

2/27/2018 10:21:12 AM



Rackem Spare Tire Carrier - E-Track Mount - RA-16HST Review- Video

Rackem Spare Tire Carrier - E-Track Mount - RA-16HST Review

Speaker 1: Today we're taking a look at a Rackem Spare Tire Carrier for E-Track systems. Now, this unit is designed to work in conjunction with standard E-Track systems and it offers a great solution to organizing your trailer. It keeps your spare tire off the floor, keeps your spare tire out of a separate storage compartment and it moves your spare tire to a convenient area so that way you have more floor space and it's always easy to access for those situations where you really need to get to it quickly. It is made from durable steel and it has protective coating so we have a zinc coating on the actual bracket so you don't have to worry about rust and corrosion. Then right here on the actual carrier, we're looking at a durable, it's like a hammered powder-coat finish. It gives it a really nice rugged look but also it's extremely durable again, so we don't have to worry about rust and corrosion.Very simple to use and very simple to operate. more


Watch Video

2/14/2018 8:35:15 AM



Fulton Spare Tire Carrier - Frame Mount - FETCSTL0701 Review- Video

Fulton Spare Tire Carrier - Frame Mount - FETCSTL0701 Review

Speaker 1: Today, we're taking a look at a Fulton spare tire carrier. Now, this unit allows you to safely mount a spare tire to your trailer. Your spare tire secures to the carrier with the included lug nuts and with the included lock. The lock is included to prevent theft. It's easy to install. It mounts anywhere along your trailer frame. more


Watch Video

2/13/2018 10:12:07 AM



Dutton-Lainson Spare Tire Carrier - Frame Mount - DL22120 Review- Video

Dutton-Lainson Spare Tire Carrier - Frame Mount - DL22120 Review

Speaker 1: Today we're taking a look at an Offset Trailer Spare Tire Carrier.Now, this spare tire carrier mounts to your trailer frame and moves your spare tire up and away from your trailer, so people who are towing boat trailers really like this type of spare tire mount because it moves the spare tire away from the boat.The unit is constructed of heavy duty steel construction, so it's very strong and durable, and it has a zinc TUFFPLATE finish on it. That is designed to keep the unit protected from rust and corrosion. This spare tire bracket is designed for 9" to 14" wheels with either 4-hole rims, which would be a 4" bolt circle, or 5-hole rims, which would be 4-1/2" bolt circle.It fits trailer frames up to 3" wide, and up to 5" tall, so you can see the multiple mounting holes that we have here. This makes the unit ready for installation onto a 3", 4", or 5" tall frame. Again, that frame needs to be 3" wide or less. Now, frame members wider than 3" do require replacement at the existing mounting bolts, or the included mounting bolts, with bolts of appropriate length.It does come with mounting hardware to get the unit installed onto your trailer, and it comes with hardware to hold the spare tire onto the carrier. more


Watch Video

2/2/2018 7:54:24 AM



Fulton Spare Tire Carrier - Frame Mount - FSTC1000301 Review- Video

Fulton Spare Tire Carrier - Frame Mount - FSTC1000301 Review

Speaker 1: Today we're gonna take a look at the Fulton high mount spare tire carrier. This will mount your spare tire up and out of the way with this carrier. This will fit both a four lug and a five lug reel, and it ends up fitting onto a three-inch by four-inch trailer tongue. This includes everything shown here on the table. Includes the carreir itself, the hardware to mount the wheel to the carrier, and the hardware to mount the carrier to the trailer. It is a clamp-on installation. more


Watch Video

2/1/2018 2:14:28 PM



Fulton Hi-Mount Spare Tire Carrier Review- Video

Fulton Hi-Mount Spare Tire Carrier Review

Speaker 1: Today we're going to be going to be taking a look at and showing you how to install the Fulton Hi Mount Spare Tire Carrier, part number FSTC100301. Flat tires and blow outs can happen even on trailers. That's why it's important to have a spare tire with you. Many trailers don't come with a spare tire carrier. The Fulton Hi Mount Spare Tire Carrier solves this problem for you. The hardware to mount your spare tire is included, which is nice. more


Watch Video

1/31/2018 2:12:52 PM



Fulton Hi-Mount Spare Tire Carrier Review- Video

Fulton Hi-Mount Spare Tire Carrier Review

Speaker 1: Today we're going to be taking a look at the Fulton Hi-Mount spare tire carrier, part number FHDSTC0101. This spare tire carrier is going to fit four, five and six lug wheels with up to a 16-and-a-half inch diameter. The offset style is going to allow you to mount it up and out of the way.We can go ahead and remove the spare tire so we can go over some additional features. It's going to fit trailer frames up to three inches wide and five inches tall. It's a clamp on installation, there's no drilling required.It features a zinc plating so it's going to resist rust and corrosion, the curved design is going to give you a seven inch offset. It comes with all the hardware you need to get it installed, it even comes with the hardware to mount your spare tire, you don't need to provide your own lug nuts.The Fulton spare tire carrier has a 45 pound weight capacity. more


Watch Video

11/22/2017 12:19:30 PM



Fulton Economy Spare Tire Carrier with Lock Review- Video

Fulton Economy Spare Tire Carrier with Lock Review

Speaker 1: Today you're going to be getting a look at the, Fulton Economy Spare Tire Carrier. It's available with or without a lock. With a lock, it's part number F-E-T-C-H-L-0700. Without a lock, it's part number F-E-T-C-L-B-0201.This corrosion resistance U-bolt-style spare tire carrier will fit most wheels, with a four or five lug pattern. If needed, the bracket can be bent to fit. more


Watch Video

9/27/2017 8:33:11 AM



MaxxTow Spare Tire Carrier - Frame Mount - MT70214 Review- Video

MaxxTow Spare Tire Carrier - Frame Mount - MT70214 Review

Today we're gonna take a look at the MaxxTow Trailer Spare Tire Carrier for four-lug and five-lug wheel. Now this spare tire carrier let's you mount your spare tire and wheel assembly on your trailer frame. As you can see it has a nice raised angle design, which provides additional clearance for your spare tire. It is made of a sturdy carbon steel construction and then finished with a corrosion resistant black powder coat finish. As you can see I put the hardware all together just to give you an idea. It's a simple clamp on installation. Clamps onto your trailer tongue. more


Watch Video

7/11/2017 9:15:09 AM



Fulton Spare Tire Carrier - Frame Mount - FHDSTC0101 Review- Video

Fulton Spare Tire Carrier - Frame Mount - FHDSTC0101 Review

Today we're going to take a look at the Fulton High Mount Spare Tire Carrier, fits four and five lug wheels. This is a nice heavy duty steel tube construction. Allows you to mount your spare tire up and out of the way on your trailer tongue. Has a zinc plating to it, provides corrosion resistance. Has a 600 hour salt spray rating on all plated surfaces. You can see right here, it's a clamp on installation, there's no drilling required, clamps right on to your trailer tongue. more


Watch Video

6/27/2017 8:15:11 AM



Draw-Tite Spare Tire Carrier - Front Hitch Mount - 6715 Review- Video

Draw-Tite Spare Tire Carrier - Front Hitch Mount - 6715 Review

more


Watch Video

4/26/2017 1:33:24 PM



CE Smith Spare Tire Carrier for Trailers Review- Video

CE Smith Spare Tire Carrier for Trailers Review

Today we'll be taking a look at the CE Smith Spare Tire Carrier for trailers, fits 4 and 5-lug wheels, 8-3/8 inches long. Part number CE22007Z-11050-2. It's also available in 12-1/4 inches long for your largest spare tires, and that part number is CE22011Z-11050-2. inaudible 00:00:33 install it on a boat trailer, and it is great for any boat trailers, utility trailers, and it will fit with any trailer with up to a 3-inch wide frame. Here you can see we got it mounted to the frame, and you can see how it ripped around that frame. Then we used the two included lug nuts to tighten it down and hold it firmly against the side. That way, it's there if you need it, and there is no drilling required. more


Watch Video

5/17/2016 2:26:06 PM



Fulton Spare Tire Carrier - Frame Mount - FETCLB0201 Review- Video

Fulton Spare Tire Carrier - Frame Mount - FETCLB0201 Review

Today we're going to be taking a look at part number FETCLB0201. This is the Fulton spare tire carrier with a lockable design. Very easy to install. The carrier is going to mount on trailer frames up to three inches wide. It's also going to come with the lockable levers which is going to add additional security. Your padlock is going to be sold separately. Now when using this system, you need to make sure that the shackle diameter of the padlock does not exceed 5/16 of an inch. more


Watch Video

5/20/2015 11:35:47 AM



CE Smith Spare Tire Carrier - Frame Mount - CE22011Z-11050-2 Review- Video

CE Smith Spare Tire Carrier - Frame Mount - CE22011Z-11050-2 Review

Today we're going to be taking a look at part number CE22011Z-11050-2. This is the CE Smith spare tire carrier for trailers. The heavy duty carrier is going to provide a mounting point for your trailer's spare tire. It's going to be constructed of a zinc plated steel so it's very strong and long lasting as well corrosion resistant. It's going to come with the actual spare tire holder, and two lug nuts. This product is made in the USA. more


Watch Video

5/5/2015 8:05:49 AM



CE Smith Spare Tire Carrier - Frame Mount - CE22007Z-11050-2 Review- Video

CE Smith Spare Tire Carrier - Frame Mount - CE22007Z-11050-2 Review

Today we're going to be taking a look at part number CE22007Z-11050-2. This is the CE Smith Spare Tire Carrier for trailers. The heavy duty carrier is going to provide a mounting point for your trailer's spare tire. It's going to be constructed of a zinc-plated steel, so it's very sturdy and long-lasting as well as corrosion resistant. It's going to come with the actual carrier and two lug nuts. It's going to be made in the USA. more


Watch Video

5/5/2015 7:35:46 AM



Redline Spare Tire Carrier - Gooseneck Mount - 413200 Review- Video

Redline Spare Tire Carrier - Gooseneck Mount - 413200 Review

Today we're going to be taking a look at part number 413200. This is the Spare Tire Carrier. This is commonly used on horse and livestock trailers, but it can be applied to many different applications. It is a weld-on installation. It's got a nice, solid steel construction with a raw finish so it doesn't require much prep work when you are ready to install it on to your application. Now the carrier is normally welded above the trailer's gooseneck. more


Watch Video

5/1/2015 4:05:47 PM



Dutton-Lainson Spare Tire Carrier - Frame Mount - DL22128 Review- Video

Dutton-Lainson Spare Tire Carrier - Frame Mount - DL22128 Review

Today we're going to be taking a look at part number DL22128. This is the Dutton-Lainson Trailer Spare Tire Carrier. It's going to give you plenty of length. The actual length is going to allow handling of wide tires or spans that are going to be wider than tongues of custom built trailers. This is designed to fit four or five hole rims. When used with a 5 on 5 bolt pattern the bracket can be bent, that's just spreading it a little bit more in order to get it to fit correctly. Steel construction with a nice zinc TUFFPLATE finish. more


Watch Video

4/29/2015 1:05:48 PM



Fulton Spare Tire Carrier - Frame Mount - FETCHL0700 Review- Video

Fulton Spare Tire Carrier - Frame Mount - FETCHL0700 Review

Today we're going to review part number FETCHL0700. This is the Fulton Economy Spare Tire Carrier with the included lock. Now this is an easy-to-install spare tire carrier that will mount pretty much anywhere on your trailer. It's normally made to be mount even this way and your spare tire put on this way, or you can even mount it on the frame this way and set your spare tire down on top of it. It does include these lockable levers that are already installed here, gives you additional security. Then the lock with the two keys is included. more


Watch Video

4/27/2015 2:38:38 PM



Dutton-Lainson Extra Offset Trailer Spare Tire Carrier Review- Video

Dutton-Lainson Extra Offset Trailer Spare Tire Carrier Review

Today we're going to install and take a look at the Dutton Lainson extra offset trailer spare tire carrier, part number DL22145. Here's what our carrier will look like with our spare tire mounted. As you can see, from the angle of the carrier and then the angle of the face of the carrier that our wheel mounts to, it angles the tire out away from the frame so that we get plenty of clearance between the spare tire and the boat. Now our carrier is designed to fit 13 and 15-inch wheel or rim tires. It will fit 5 on 4 and 1/2-inch bolt pattern and 6 on 5 and 1/2-inch bolt pattern through the 3 studs to bolt to the carrier. Currently we're on a 5 and a 4 and 1/2-inch bolt pattern and we can use the other 3 studs by simply taking the studs out and driving them into the other 3 pre-drilled holes for the 6 and a 5 and 1/2-inch bolt pattern. When bolting to our frame, the carrier is designed to fit a maximum width of 3-inches and maximum height of 5-inches. The carrier and hardware is zinc-plated with a tough plate finish that has 3 times the corrosive resistance of a standard zinc-plated chrome process and 30% greater resistance when compared to powder-coated finishes. Now to mount our spare tire carrier we'll have the main body and bracket that will get clamp to our frame. more


Watch Video

2/12/2015 2:06:06 PM



Ultra-Fab Folding Spare Tire Carrier for Trailer and RV Bumpers Review- Video

Ultra-Fab Folding Spare Tire Carrier for Trailer and RV Bumpers Review

Today we're going to be taking a look at the Ultra-Fab folding bumper-mounted spare tire carrier for trailers and RVs, part number UF15-954730. Our spare tire carrier is going to allow us to have a removable attachment point for our spare tire here on the bumper of our RV. Now by simply removing a pin and clip located here in the rear we're going to be able to fold this down and out of the way, giving us access into the rear of our RV. As you can see, we've got a heavy duty steel construction. Full welds go down the inside to secure everything in place and give us a nice firm connection point. They've also powder coated it to give us premium rust resistance and stand up to the test of time. more


Watch Video

1/15/2015 8:52:27 PM



Stromberg Carlson Bumper Mounted Tire Carrier Review- Video

Stromberg Carlson Bumper Mounted Tire Carrier Review

Today we're going to be taking a look at the Stromberg Carlson bumper-mounted spare tire carrier. This is in the folding design. It's been designed to fit both 4" and 4-1/2" bumpers with the u-bolt-style connection. Part number on it is TR-2. What really sets this spare tire carrier apart from some of its competitors is the folding design. By simply pulling the pin and clip that are located right here at the bottom this is going to tilt right down out and away from the rear of our RV or camper. more


Watch Video

12/31/2014 12:54:20 AM



CE Smith Offset Spare Trailer Tire Carrier Review- Video

CE Smith Offset Spare Trailer Tire Carrier Review

Today we're going to be taking a look at the C.E. Smith Heavy Duty Spare Tire Carrier. This has been designed for use with anything from a 1-1/2" up to 3-1/2"-wide trailer frame. They can measure in between 3 and 4" tall. It's a nice heavy duty construction. All of our seams are fully welded. We don't have any tack welds or any spot welds that we're going to deal with. more


Watch Video

11/4/2014 4:25:21 PM



Rackem Spare Tire Rack Review- Video

Rackem Spare Tire Rack Review

Today, we'll be taking a look at the Rackem Spare Tire Rack for Enclosed Trailers, part number RA-16. This rack features a unique and durable hammered paint finish, and it will last for many years. It allows you to securely transport spare tires in your enclosed trailer. You have multiple attachment points. The multiple attachment points allow you to adjust the height of your spare tire or carry an additional tire. Additional holders are sold separately with part number RA-16HST. Now that we've gone over some of the features of the rack, let me show you how to get this installed into your trailer. more


Watch Video

10/6/2014 3:40:31 PM



RackEm Spare Tire Carrier Review- Video

RackEm Spare Tire Carrier Review

Today we're here in our enclosed trailer and we're going to be taking a look at the Rackem Spare Tire Carrier for E-Track, part number RA-16HST. Now you'll see here on our trailer, we've got our spare tire just laying on the ground which is common but it's always in the way so you're always having to move it out of the way whenever you want to load something in or get it out of your trailer. Now this particular trailer here, it already has some standard vertical E-Track, the part number on the E-Track is E19148. This Rackem spare tire carrier is designed to go in any of the slots here, depending on where you want to mount the spare tire. We're going to go ahead and put our tire down low here. You'll notice there's a little clip here that you'll squeeze in so then you'll slide it into the track, drop it down, secure it. To remove it, pull in on the tab, gently lift up and drop it down. We'll go ahead and reinstall it here in our E-Track. We'll need to remove the wing nut and the flat washer. Once we have that done, we can go ahead and take our spare tire and set up in place. more


Watch Video

8/6/2014 10:16:27 AM



Curt Spare Tire Carrier - Hitch Mount - C31006 Review- Video

Curt Spare Tire Carrier - Hitch Mount - C31006 Review

Today we're going to review part number C31006. This is the Curt Trailer Hitch Mounted Spare Tire Carrier. Now, this is a universal spare tire carrier that'll fit in any wheel bolt patterns and installs into a two inch by two inch trailer hitch receiver. Now, this carrier will fit on a front or a rear mounted hitch receiver. It's made of a nice, durable black powder coat finish to help resist corrosion. Now, the hardware, if you'll notice on here, it has two horizontal slots and one vertical slot, and that's where you would mount your wheel and tire up to here to carry your spare tire. Now, the hardware to mount your wheel on to here is not included with this part number. more


Watch Video

4/14/2014 2:49:55 PM



Fulton Spare Tire Carrier with Lock Review- Video

Fulton Spare Tire Carrier with Lock Review

Today on our utility trailer we're going to be installing the Fulton Economy Spare Tire Carrier with Wheel Nut Lock, part number FETCSTL0701. Our first step is to find a location on our trailer to mount our spare tire. Then we'll lift our tire into position and take a U-bolt and feed it around the rail of the trailer. In this case we had to go at an angle. We'll go through two lug nut holes on the tire using the lug nut to fasten the bottom part of the U-bolt. With that done we'll take the two sides of the lock, the back side of the lock will slide to the top of the U-bolt and then get sandwiched by the lug nut. more


Watch Video

9/11/2013 10:20:25 AM



Stromberg Carlson Bumper Mounted Spare Tire Carrier Review- Video

Stromberg Carlson Bumper Mounted Spare Tire Carrier Review

Today we will be installing the Stromberg Carson rigid tire carrier for use with travel trailers and fifth wheels, part number tr-1. This particular model fits on four-inch square bumpers on the rear of travel trailers and fifth wheels to hold the spare tire. Lets begin by laying out the parts. As you will see there are two u-bolts as well as a lock washer and a nut that will be used to hold the spare tire carrier to the rear bumper. You will also notice that there are two bolts as well as two clips that attach to the upper part of the tire carrier that will be used to hold the tire in place. You will first start by pushing one of the bolts through and taking the clips that come with the kit and pushing it on tight. more


Watch Video

4/19/2013 3:26:15 PM



Dutton-Lainson Offset Trailer Spare Tire Carrier Installation- Video

Dutton-Lainson Offset Trailer Spare Tire Carrier Installation

Today on our Road Master Trailer, well be installing the Dutton-Lainson Spare Tire Carrier, part number DL22120. This will be in conjunction with our new spare tire, part number AM32395. First, well take our spare tire carrier bracket and find the position on the frame where were going to mount it. Next, well take the bolts and brackets and get them set up to the top mount. On the back side for our attachment will be a lock washer and nut. Once we get them set to the frame, well go ahead and insert the bottom bolts and fasteners. more


Watch Video

5/3/2012 7:46:55 AM



  1