Hitch Accessories Installation And Review Videos


Gen-Y Hitch Hitch Accessories 325-GH-003 Review- Video

Gen-Y Hitch Hitch Accessories 325-GH-003 Review

more


Watch Video

11/20/2017 8:25:16 AM



Gen-Y Hitch Hitch Accessories 325-GH-002 Review- Video

Gen-Y Hitch Hitch Accessories 325-GH-002 Review

more


Watch Video

11/20/2017 7:45:16 AM



Gen-Y Hitch Hitch Accessories 325-GH-099 Review- Video

Gen-Y Hitch Hitch Accessories 325-GH-099 Review

Speaker 1: Today we're taking a look at the Gen-Y hitch pin. This hitch pin is designed for use with two inch by two inch and two and a half inch by two and a half inch hitches. The diameter is five eighths of an inch. A hitch pin is designed to hold a ball mount or hitch accessory inside the receiver tube of your hitch. It's made from a durable steel construction with protective finishing, so it'll be kept safe from rust and corrosion.The usable length is measured from the bottom of this head right here to the closest point of the hole where the clip installs, so if we took a measurement of that you can see that this offers a usable space of around four inches. To be exact, it's about four and one-eighth of an inch. more


Watch Video

11/17/2017 11:35:32 AM



Gen-Y Hitch Hitch Accessories 325-GH-007 Review- Video

Gen-Y Hitch Hitch Accessories 325-GH-007 Review

Speaker 1: Today we're taking a look at the Gen Y Hitch Reducer Sleeve. Now this adaptor changes your two and a half inch receiver to a two inch receiver. So that way you can use your two inch hitch mount accessories inside of your two and a half inch trailer hitch.The unit is constructed of a sturdy steel construction and it features a black powder coated finish that's going to help it resist rust and corrosion. It's going to last and look good for a long time.Now a pin and clip or a hitch lock, those items are not included, so they will need to be provided separately. If you're in need of one, you can find them here at etrailer.com. This unit will accept a standard 5/8th diameter pin. more


Watch Video

11/14/2017 8:25:18 AM



Curt Hitch Accessories C21507 Review- Video

Curt Hitch Accessories C21507 Review

Speaker 1: Today we're taking a look at the Curt Hitch pin and clip for three inch trailer hitch receivers. This hitch pin secures a ball mount, or hitch mount accessory inside the receiver tube of your trailer hitch.The clip then inserts on to the end of the pin to hold the pin in place. The clip is included. This is made from a sturdy, steel construction, and it has corrosion-resistant zinc plating on it, that way it won't be affected by rust or corrosion. It will last a long time.A few measurements to go over with you real quick: the diameter is 5/8 of an inch, and the usable pin length is measured basically from the edge right here, because that's where the clip would insert, so it measures from this edge all the way to where it starts to curve. If we put a ruler on there and measure that, it has a usable pin length of about 4 3/4 inches.This is going to be perfect for those larger hitches, like a 2 1/2 inch by 2 1/2 inch hitch, as well as the 3 inch by 3 inch trailer hitch. more


Watch Video

10/24/2017 9:37:29 AM



Saris Hitch Accessories SA3021 Review- Video

Saris Hitch Accessories SA3021 Review

Speaker 1: Today we're taking a look at the Replacement Hitch Tite Anti-Rattle Hitch Pin. This replaces the Hitch Tite anti-rattle hitch pin for your Saris bike rack with the hollow two inch shank. Once it's installed it really helps reduce movement and noise of the rack when the rack is in your hitch. Once you have this inserted into the hollow shank of the bike rack and you insert the bike rack into the receiver tube of your hitch all you have to do is insert the anti-rattle bolt.That threads in to the welded on nut and then you can tighten it using a 3/4 inch wrench or socket. Comes with a split lock washer and the clip that goes on the other side of the pin. It includes all of the units that you see here on the table and the unit does have protective finishing which keeps it all safe from rust and corrosion. more


Watch Video

10/16/2017 1:08:58 PM



Curt Hitch Accessories C45408 Review- Video

Curt Hitch Accessories C45408 Review

Speaker 1: Today we're going to take a look at the Curt hitch receiver reducer sleeves, three inch to two and a half inch, or two inch. Now, these adapters will reduce a three inch by three inch hitch receiver opening to a two and a half inch by two and a half inch. Or if you slide the other one in, it'll reduce it to a two inch by two inch.The small sleeve also can be used separately to reduce a two and a half inch by two and a half inch hitch receiver to a two inch by two inch. This'll let you use a two and a half inch and two inch towing and hitch mounted accessories. It's very easy to use. Slides directly into your hitch, or onto the shank of your accessory.If you notice, it has a durable carbide black powder coat finish to it to protect it. more


Watch Video

10/9/2017 8:10:12 AM



Curt Hitch Accessories C49480 Review- Video

Curt Hitch Accessories C49480 Review

Speaker 1: Today we're going to take a look at the Curt Combo Bar with the 2" Trailer Hitch Receiver. This is in a raw finish, and it's 48" long. Now this raw steel hitch receiver is made from steel for maximum strength. It can be used to extend the reach of your receiver, or to create a piece of custom towing equipment. The receiver bar is sized and punched to fit all the common weight distribution hitch ball mounts or utility ball mounts.If you notice on the end right here, it has a forged 1/2" reinforcing collar for increased strength. The tube is crafted with a raw finish so it's ideal for welding. more


Watch Video

9/21/2017 9:50:15 AM



Curt Hitch Accessories D36 Review- Video

Curt Hitch Accessories D36 Review

Speaker 1: Today we're gonna take a look at the Curt 2in solid steel hitch bar with a raw finish, 24in long. Now for the do-it-yourselfer this fabrication steel hitch bar features a standard 2inx2in solid shank and a raw finish. This is constructed from a high strength hot rolled steel and it's designed with rounded corners for easier insertion into the receiver and it is designed to fit all 2inx2in receiver tube openings. If you notice right here, it does have a pre drilled hitch pin hole, has a raw finish which is ideal for welding. This part is made in the USA. Give you a few dimensions on this: total length from edge to edge or end to end is gonna be right at 24in long, the width and the height is gonna be right at 2inx2in. more


Watch Video

9/20/2017 2:11:58 PM



Curt Hitch Accessories D35 Review- Video

Curt Hitch Accessories D35 Review

Speaker 1: Today we're going to take a look at the Curt two inch solid steel hitch bar with the raw finish. It's 22 inches long. For the do-it-yourselfer, this fabrication steel hitch bar features a standard two inch by two inch solid shank and a raw finish. It's constructed from high strength hot rolled steel. It is designed with rounded corners for easier insertion into the receiver. It is designed to fit all two inch by two inch receiver tube openings.If you notice right here, it does have a pre-drilled hitch pin hole. more


Watch Video

9/20/2017 2:01:55 PM



Curt Hitch Accessories C49524 Review- Video

Curt Hitch Accessories C49524 Review

Speaker 1: Today we're going to take a look at the Curt 1-1/4" steel hitch bar with the raw finish, 24" in length.Now this is for the do-it-yourselfer. This fabrication steel receiver tubing can be used to extend the reach of your receiver, or to create a piece of custom towing equipment, and is constructed of a hot rolled steel for superior strength, and is designed with rounded corners for greater versatility. Right here, this will accept any 1-1/4" by 1-1/4" ball mount shank. It does have the pre-drilled hitch pin hole, and if you notice they also include the 1/2" reinforcing collar for extra strength. It is a raw finish. It's ideal for welding. more


Watch Video

9/20/2017 12:55:12 PM



Blue Ox Hitch Accessories BX88225 Review- Video

Blue Ox Hitch Accessories BX88225 Review

Speaker 1: Today we're taking a look at the Blue Ox Hitch Receiver Immobilizer II. Now the component that I'm talking about is this right here. So, for demonstration purposes, I have a hitch with a hitch extender in there. Now, the immobilizer keeps your tow bar, drop receiver, bike rack, cargo carrier, extender or other hitch mount accessory from rattling and shifting while you're on the road.So, right now, we have our extender installed in our hitch. It's held in place with a traditional pin and clip. And as you can see, we have a lot of up-and-down movement and we have a lot of side-to-side movement. more


Watch Video

9/19/2017 11:07:22 AM



Blue Ox Hitch Accessories BX88224 Review- Video

Blue Ox Hitch Accessories BX88224 Review

more


Watch Video

9/19/2017 11:03:27 AM



MaxxTow Hitch Accessories MT70024 Review- Video

MaxxTow Hitch Accessories MT70024 Review

more


Watch Video

9/18/2017 3:33:25 PM



Brophy Hitch Accessories HR26 Review- Video

Brophy Hitch Accessories HR26 Review

Today we're going to review part number HR26. This is the Brophy Hitch Reducer and Extender. It goes from 2.5 inches to 2 inches and it's 12 inches long. Now, this will let you use a 2 inch hitch mount and accessory in your 2.5 inch trailer hitch. Basically the shank right here will slide into the trailer hitch receiver to reduce the size from 2.5 inches to 2 inches on this end right here. It also will extend your trailer hitch receiver opening 6 inches out from the rear of your vehicle to avoid any obstacles. It gives you extra clearance for hitch mount and accessories such as bike racks or cargo carriers. more


Watch Video

9/13/2017 12:48:26 PM



Malone Hitch Accessories MPG544 Review- Video

Malone Hitch Accessories MPG544 Review

Speaker 1: Today we're taking a look at the Malone two inch dual purpose hitch receiver. The biggest thing you'll notice about this product is that it has two receiver tubes. This unit allows you to use a hitch mounted bike rack or cargo carrier, while towing a trailer. It's made from a durable steel construction. It features a black, powder-coated finish, which is designed to resist rust and corrosion, making sure that the unit looks good and will last for a long time. This part number actually comes with some anti-rattle devices.This one right here is for use at the vehicle hitch. more


Watch Video

8/29/2017 1:24:06 PM



Roadmaster Hitch Accessories RM-910034 Review- Video

Roadmaster Hitch Accessories RM-910034 Review

Speaker 1: Today we're going to take a look at the Roadmaster Hitch pinning clip for 2" and 2 1/2" trailer hitch receivers. Now, this 5/8" diameter pin will fit 2" and 2 1/2" hitches, and has a 4" usable length. This hitch pin will secure your ball mount or other hitch mounted accessory in your trailer hitch receiver. The clip portion inserts into the end of this pin to hold the pin into place. They are a corrosion resistant zinc-plated finish and it does include the retaining clip. Again, the application is 2" x 2" hitch receivers and 2 1/2" by 2 1/2" hitch receivers. more


Watch Video

8/18/2017 9:25:00 AM



Curt Hitch Accessories C45785 Review- Video

Curt Hitch Accessories C45785 Review

Speaker 1: Today we're gonna be taking a look at the Curt Trailer Hitch Receiver Adapter. Now, this hitch adapter turns your inch and a quarter class two trailer hitch receiver into a two inch receiver so that you can mount a bike rack, cargo carrier or other two inch hitch accessory. The extended length allows your hitch mounted accessory to clear your bumper. It's made from a strong steel construction. It does feature a solid inch and quarter shank, and then it has the nice two inch by two inch receiver tube opening. The steel is coated with a gloss black powder coat finish, so it' very durable and it's gonna do a great job at resisting rust and corrosion. more


Watch Video

8/17/2017 10:20:10 AM



Curt Hitch Accessories C45405 Review- Video

Curt Hitch Accessories C45405 Review

more


Watch Video

8/1/2017 11:03:26 AM



Curt Hitch Accessories C45013 Review- Video

Curt Hitch Accessories C45013 Review

Today we're going to review part number C45013. This is the Curt Vertical Receiver Adapter. This is a two inch to two inch adapter. This part is designed to fit on the Curt Stealth hitches. It is designed to fit a vertical hitch. A vertical hitch would be one where the receiver tube is actually up and down, in other words, some of theDodge vehicles use a hitch like that where the tube would come down, it's behind the rear of the car so you really can't see it.What this adapter does, this part would slide up into thatvertical hitch, and then extend out to give you the horizontal hitch receiver opening that you're needing. Now the rear of this as you see, the rear of this horizontal tube is open. more


Watch Video

6/29/2017 2:23:43 PM



Malone Hitch Accessories MPG908 Review- Video

Malone Hitch Accessories MPG908 Review

Today, we're going to be taking a look at the Malone anti-rattle hitch lock system. This unit's designed to stop movement between the receiver tube of your hitch and the accessory that's installed inside the hitch. It's great for eliminating rattle and wobble. It installs quickly and easily. The unit's going to feature a nice heavy-duty steel construction with corrosion-resistant coating, so you don't have to worry about rust or corrosion buildup. It's going to come with all necessary hardware for your installation. more


Watch Video

6/27/2017 11:47:48 AM



Blue Ox Hitch Receiver Immobilizer Road Test- Video

Blue Ox Hitch Receiver Immobilizer Road Test

Now we'll take our hitch immobilizer out onto our test course, in our parking lot. You will notice with it installed, as we make cornering maneuvers and as we go over bumps in our parking lot, that our accessory inside of our hitch, such as our ball mount or our cargo carrier, has a lot less swaying side to side, and movement up and down. This swaying, side to side, and this movement, up and down, is what causes an annoying clanking noise that you can hear inside your vehicle, as you have something inside your hitch and you're driving down the road. Now we'll go down our test course without it installed. You will notice how much more movement we have in our hitch accessory ball mount or our cargo carrier. You'll notice how much it's going side to side and up and down, and how much more noise we'll be getting inside our vehicle because of this. You can see how the hitch immobilizer is a great investment to have with your trailer hitch.. more


Watch Video

5/11/2017 11:07:07 AM



Curt Hitch Accessories C22321 Review- Video

Curt Hitch Accessories C22321 Review

Today we're going to be taking a look at the Curt Anti-Rattle Kit. Now this kit's designed to stop rattling and prevent swaying of a load when using a hollow shank on a two inch by two inch hitch mounted accessory. This is compatible with Curt cargo carriers, bike racks, ball mounts, and other hollow shank accessories. It's going to come with you threaded pin. This allows the bracket to be tightly installed. The unit is constructed of high strength steel, and you'll notice that every component on the unit is going to be protected by a durable yellow zinc plated finish, so it's going to protect it from rust and corrosion. A few measurements I want to go over with you real quick, and then I'll show you how it assembles, and how it would install. The overall length of this bracket right here it's going to be about two and one eighth of an inch. more


Watch Video

4/20/2017 9:57:09 AM



MaxxTow MaxxHaul Dual Pull Trailer Dolly Review- Video

MaxxTow MaxxHaul Dual Pull Trailer Dolly Review

Today we're going to be taking a look at the MaxxTow MaxxHaul Dual Pull Trailer Dolly, part number MT70881. This trailer allows you to make it easier to maneuver your small trailer into tight spots manually, or use the clevis to convert your ATV or tractor into a tow vehicle. So, here we are at our trailer and if you ever had an issue where you needed to move your trailer, it was in a tight spot where you couldn't exactly get your vehicle, that's where our dolly is going to come in handy. We can actually just take our dolly, move the stand out of the way, and we can start pulling our trailer and move it wherever we need to go. This dolly's going to be great, whether you need to move your small trailer out of the way, or even get it into the garage and you don't feel too comfortable backing it in, simply hook up the dolly and you'll be able to steer, and have a lot more control and see what you're doing by doing it by hand. Now, our trailer dolly features a chrome 1-7/8" ball, so it's going to last and have that nice finish. It is interchangeable, so if you have different coupler sizes on your trailers or if you have several different trailers that you tow with, you're going to be able to change that out to whatever you may need. Now our dolly is made out of steel, and it has a nice powder coat finish, so it's going to resist rust and corrosion. more


Watch Video

3/16/2017 10:53:15 AM



Redline Hitch Accessories LP716 Review- Video

Redline Hitch Accessories LP716 Review

Today we're going be taking a look at a seven inch diameter lynch pin. Now these pins can be used for variety of applications. They can be used as replacement parts. They can be used to take the place of a traditional pin and clip. It's a really nice design. They are really easy to use. more


Watch Video

2/24/2017 12:15:15 PM



MaxxTow Hitch Extender Review- Video

MaxxTow Hitch Extender Review

Today, we're going to be taking a look at the Maxxtow Hitch Extender for 2 inch hitches. Part number MT70024. This hitch extender comes in handy when you need to get accessories, such as your bike rack here, around your spare tire. It also works out great when you need clearance for the tailgate on your truck. It's also great for your trailer. It's going to come in especially handy around tight turns. more


Watch Video

12/16/2016 11:01:55 AM



Roadmaster Hitch Accessories RM-071-1075 Review- Video

Roadmaster Hitch Accessories RM-071-1075 Review

Today we're going to take a look at the Road Master anti-rattle hitch extender for 2 inch hitch receivers. Now, this part with extend your trailer hitch receiver opening out from the rear of your motor home to avoid any obstacles. It does give you an extra clearance of about 7-3/4 inches between your vehicle and your motor home. This part is constructed of a nice durable steel. The very end portion back here that sticks into the hitch receiver opening is a solid steel shank. It will resist corrosion. more


Watch Video

12/7/2016 10:53:20 AM



Reese Hitch Accessories RP11003 Review- Video

Reese Hitch Accessories RP11003 Review

Today we're going to take a look at the Reese 14" Long Hitch Extender for 2" trailer hitches. Now this extender will extend a trailer hitch receiver opening from the rear of your vehicle to avoid any obstacles. It gives you extra clearance for your trailer. Helps you clear your slide out camper with the extended overhang, and it will allow you to mount your bike rack without having to remove your rear-mounted spare tire. It is constructed of a durable steel. The shank portion right back here is a solid rear shank. more


Watch Video

11/22/2016 3:48:18 PM



Jacko Enterprises Hitch Accessories JE00600 Review- Video

Jacko Enterprises Hitch Accessories JE00600 Review

Today we're going to be taking a look at the Easy-Hitch Light-Up, Telescoping Hitch Aligner. This unit makes attaching a trailer to your vehicle a one-person operation. It's a very easy-to-use hitch locator. All you have to do is put one telescoping rod with a magnetic base on your hitch ball, and then place the other one on the trailer coupler, and then use the flashing lights to line them up. It's a really nice design. Again, very easy to use. more


Watch Video

11/11/2016 9:10:06 AM



Roadmaster Hitch Accessories RM-071-75 Review- Video

Roadmaster Hitch Accessories RM-071-75 Review

Today, we'll be reviewing part number RN-071-75. This is the Roadmaster Trailer Hitch Receiver Extension. It's going to extend our trailer hitch receiver to seven and three quarters of an inch. This is designed for a 2 inch by 2 inch trailer hitch. It's going to offer 6000 pound gross vehicle weight rating and a 100 pound maximum tongue weight. It's very important that you keep in mind that this extender is designed for tow bar use only. more


Watch Video

10/31/2016 3:03:21 PM



Fastway Hitch Accessories DTADP35 Review- Video

Fastway Hitch Accessories DTADP35 Review

Today we're going to be taking a look at the Fastway Adapter Sleeve with the included hitch lock. This designed to let your Fastway or Diversi-Tech DTLBM and DTALBM series mounts fit into a 2 1/2 inch receiver. It's going to include two sets of pinholes. One set lines up with the locking pins of the ball mount. The other set lines up with the hitch pin holes in the 2 1/2 inch receiver. The unit is made from a steel construction. more


Watch Video

10/24/2016 10:55:07 AM



Reese Hitch Accessories RP45018 Review- Video

Reese Hitch Accessories RP45018 Review

Today we're going to be taking a look at part number RP45018, this is the Titan hitch box extension for 2 and a half inch trailer hitches. Now this portion here is going to be the portion that slides into the receiver tube of your hitch, and then this portion up here is going to be where you install your hitch inaudible 00:00:16 accessory, at the end of the extension. This is going to convert down to a 2 inch by 2 inch opening, and so it is designed to fit into a 2 and a half inch by 2 and a half inch and then it's going to adapt or convert down to a 2 inch by 2 inch. This is designed to extend the receiver opening 41 inches or 48 inches away from the truck, those measurements are going to be taken from center of hitch pinhole to center of hitch pinhole. This is going to be ideal for slide out campers with extended overhangs. The overall unit's going to be made from a steel construction with a nice black powder coated finish on it to help prevent and keep it protected from corrosion and any rust. This portion right here is going to be the included hitch cover. Simply just pops out, it's going to open up to the two inch by two inch receiver opening, it's also got this chrome plastic piece that goes around that collar, that can be removed as well, that simply just snaps on and off. Now all the pinholes on this system are going to measure 5 eighths of an inch. more


Watch Video

10/10/2016 10:33:09 AM



Rage Powersports Hitch Accessories ANTI-TILT-REV Review- Video

Rage Powersports Hitch Accessories ANTI-TILT-REV Review

Today, we're going to be taking a look at the anti-tilt bracket for 2-inch hitch receivers. This is a heavy-duty, anti-rattle clamp that's going to keep your hitch-mount accessories stable and quiet. It's going to help reduce or eliminate movement and rattle within the receiver tube of your hitch. It's ideal for cargo carriers, bike racks, and similar hitch-mount accessories. It's made from a durable steel construction with a protective black finish to keep it safe from rusting corrosion. This bracket clamps the shank of your hitch-mount accessory to the receiver tube of the hitch. As that happens, the device will force the shank of the accessory tight against the receiver tube. more


Watch Video

10/8/2016 9:52:41 AM



Roadmaster Anti-Rattle Hitch Extender Review- Video

Roadmaster Anti-Rattle Hitch Extender Review

Today we're going to be taking a look at the Road Master Hitch Extender for 2 inch hitch receivers, available in 2 sizes. The 11 inch long version, it's part number RM-071 or part number RM-071-1075 for the 7.5 inch version. Here you'll see we've got our tight angle turned here with our Falcon 2 tow bar. Plenty of space here. That's going to be until our customer puts his basket back on the back of his coach here. He's got a basket that's about as wide as the back of the coach and it sticks out a couple of feet. more


Watch Video

10/3/2016 2:40:39 PM



MaxxTow Hitch Accessories MT70283 Review- Video

MaxxTow Hitch Accessories MT70283 Review

Today, we're going to be taking a look at a anti-rattle clamp for two-inch trailer hitch receivers. Now, this is a heavy duty anti-rattle clamp that's going to keep your hitch mount accessories stable and quiet. It really helps reduce or eliminate movement and rattle within your hitch. It's ideal for cargo carriers, bike racks, and similar hitch mount accessories. It's not intended to be used for towing. It's made from a very strong and durable all-steel construction. more


Watch Video

9/27/2016 10:36:02 AM



Fastway Hitch Accessories DTADP25-SS Review- Video

Fastway Hitch Accessories DTADP25-SS Review

Today we're going to take a look at the adapter sleeve for the Fast Way and the Diversitech 00:00:03 2 inch locking ball mounts to 2 1/2 inch receivers. This part is designed to let you take the two inch Fast Way or Diversitech 00:00:10 DTLBM 00:00:12 and DTALBM 00:00:14 ball mounts and allow them to fit into a 2 1/2 inch hitch receiver. It includes two sets of hitch pin holes right here. One set will line up with the locking pins of the Fast Way or the Diversitech 00:00:24 ball mount, and the other set will line up with hitch pin holding your 2 1/2 inch hitch receiver. This is a steel construction. It has a nice black powder coat finish on it. more


Watch Video

8/30/2016 8:35:48 AM



TorkLift SuperTruss Hitch Extenstion Review- Video

TorkLift SuperTruss Hitch Extenstion Review

Today we'll be having a look at the TorkLift SuperTruss Hitch Extension for SuperHitch trailer hitch receivers, part number TLE1532. Now you may wonder why you want a SuperTruss extension. Well they're perfect for when you have a camper that sits in your truck bed, so when you're tailgates down and your camper is in your truck bed, you can still hook up to a trailer. Here's what the SuperTruss extension looks like installed on the back of our truck here today. Just want to go ahead and point out this is meant to be used with SuperHitch hitches, as we already have one installed here on our truck. It's a real simple installation. We have a two five eighths inch hitch pin holes that we put hitch pins through to secure it into the SuperHitch receiver on our truck. more


Watch Video

8/24/2016 11:01:09 AM



Brophy Hitch Extender with Step Review- Video

Brophy Hitch Extender with Step Review

Today we're going to be taking a look at the Brophy Hitch Extender with step for 2-inch hitches. It's available at 19-inches-long, part number ST12 and 23-inches-long, part number ST18. Extend your trailer hitch receiver opening to give you more clearance during turns. This 19-inch Brophy Hitch extender will work with ball mount, bike rack, cargo carrier or any other hitch mounted accessory. As you can see we've got it set up here with our ball mount and the step is going to come in handy for anything you might need to get out of the back of your truck. The extension's also going to help with any clearance issues that we may have with our jack. If your vehicle has a spare tire at the rear you can use the extender to bright 00:01:00 enough clearance for your bike rack or cargo carrier. The 19-inch-long one gives us a 14-inch extension and the 23-inch-long one gives us an 18-inch extension. Our step measures 17 inches wide by 6 and a half inches deep. It features a diamond shred pattern for good grip and has a 300 pound weight capacity. more


Watch Video

7/15/2016 11:55:27 AM



Brophy Hitch Extender with Step Review- Video

Brophy Hitch Extender with Step Review

Today we're going to be taking a look at the Brophy hitch extender with step for 2 inch hitches, part #ST12. Extend your trailer hitch receiver opening to give you more clearance during turns. This 19 inch extension will work with your ball mount, bike rack, cargo carrier, or any other hitch mounted accessory. As you can see, we've got it set up here with our ball mount and the step is going to come in handy, for anything you might need to get out of the back of your truck. The extension's also going to help with any clearance issues that we may have with our jack. If your vehicle has a spare tire at the rear, you could use the extender to provide enough clearance for your bike rack or cargo carrier. From the sight of the hitch pin hole to the end of the receiver tube is 16 1/2 inches. more


Watch Video

6/10/2016 10:21:06 AM



Reese Hitch Accessories RP11004 Review- Video

Reese Hitch Accessories RP11004 Review

Today we're going to take a look at the Reese 18-inch long hitch extender for 2 inch trailer hitches. This hitch extender will extend your trailer hitch receiver opening from the rear of your vehicle to avoid any obstacles. It'll give you extra clearance for your trailer. It can allow you to clear your slide-out camper that might have an extended overhang, and also allow you to mount your bike rack on a vehicle without having to remove a rear-mounted spare tire. This is constructed of a durable steel. This helps resist corrosion with the black powder coat finish. You can see on the very end portion back here, this section is actually a solid piece, and this is what goes in the 2 inch-2 inch opening. more


Watch Video

5/31/2016 2:05:48 PM



Blue Ox Hitch Receiver Immobilizer II Review- Video

Blue Ox Hitch Receiver Immobilizer II Review

Today, we're going to be taking a look at the Blue Ox Hitch Receiver Immobilizer II for 2 1/2 inch hitches, part number BX88225. Now, as you can see as we're going to go across our test course here, we're going to do the offset speed bumps, and you can watch it kind of bounce around as we hit the bumps. As we go over our straight speed bumps, it's going to have the same action, just kind of flopping up and down and moving around. As we're driving through our parking lot here, you're going to see we've got a lot of motion as we drive around. Now that we have our immobilizer installed, we're going to go back through our same test course. As we go through the offset speed bumps, you're going to see that it's going to be a lot less motion as we go over the bumps. Transitioning to the straight speed bumps, you're going to see the same thing. more


Watch Video

5/24/2016 2:37:21 PM



Brophy Hitch Reducer and Extender Review- Video

Brophy Hitch Reducer and Extender Review

Today we're going to be taking a look at the Brophy hitch reducer and extender, two and a half inch to two inch trailer hitch, part number HR26. With this product not only do you get a reducer, but you also get an extender. It's perfect for situations such as this where we can't drop our tailgate down all the way because our jack is getting in the way. Now with it installed as you can see, zero problems. This can also work out great if you need a little more clearance for your bike racks or cargo carriers. It's made out of a sturdy steel construction with a black powder coat finish, so it's going to resist rust and corrosion. more


Watch Video

5/19/2016 2:41:15 PM



Tow Ready Hitch Accessories 80818 Review- Video

Tow Ready Hitch Accessories 80818 Review

Today we're going to take a look at the Tow Ready 18 inch combo bar with the 2 inch trailer hitch. This receiver bar is designed for use in fabricating an under vehicle receiver hitch when a receiver is not available. It's made of a cold pharm 1/4 inch thick structural tubing. It is sized and punched to fit all common weight distribution hitch ball mounts or utility ball mounts. It does include the collar, has a nice black powder coat finish over an eco-primer. The overall length on this ... more


Watch Video

5/18/2016 7:35:46 AM



Trailer Valet XL Trailer Dolly Manufacturer Demo- Video

Trailer Valet XL Trailer Dolly Manufacturer Demo

Hey guys, let's go ahead and talk about the features of the Trailer Valet XL. First of all it has this very nice wrinkled black powder coating that can withstand up to 300 hours of corrosion. That's great if you live on the coast or by any body of water. We have an automatic braking system that will engage any time this handle is released. Down here are two 9-inch pneumatic tires, each able to withstand 500 pounds of pressure. Now, combined that gives us a total tongue weight capacity of 1,000 pounds. more


Watch Video

5/12/2016 2:07:04 PM



Curt Trailer Hitch Receiver Pin and Clip Review- Video

Curt Trailer Hitch Receiver Pin and Clip Review

Today we're going to be taking a look at the Curt pin and clip for two and a half inch trailer hitches, part number C21582. This pin and clip's going to fit your class III, IV and V trailer hitch receivers. It has three inches of usable pin space, so we have plenty of room to work with. The pistol grip makes it easy to install and remove and the grooved in makes for easy pin installation. The whole thing has a nice zinc plated finish so it's going to resist rust and corrosion. It's ideal for securing all of your two and half inch by two and a half inch trailer hitch accessories. more


Watch Video

4/26/2016 9:45:18 AM



Titan Trailer Hitch Pin and Clip Review- Video

Titan Trailer Hitch Pin and Clip Review

Today we're going to be taking a look at the Reese Titan Trailer Hitch Pin and Clip for 2 1/2 inch trailer hitch receivers, part number 74149. This pin and clip fits trailer hitches with 2 1/2 by 2 1/2 inch receiver openings. It has a zinc-plated finish, so it's going to resist rust and corrosion. From end to end it measures 6 inches long, so you have plenty of room to work with. The pin diameter is 5/8 of an inch. Use it to secure all of your 2 1/2 inch trailer hitch accessories. more


Watch Video

4/22/2016 3:52:19 PM



Curt Hitch Receiver Reducer Sleeve Review- Video

Curt Hitch Receiver Reducer Sleeve Review

Today we're going to be taking a look at the Curt 00:00:01 hitch receiver reducer sleeve, 2.5 to 2 inch. Part number C45405. This 2 inch adapter let's you use your 2 inch towing products and 2 inch accessories with your 2.5 inch receiver. The little nibs 00:00:16 here ensure that you can't insert it too far. It slides directly into your hitch or onto your 2 inch accessories. It's very easy to use, just line up your pin holes, take your pin and clip ... more


Watch Video

4/20/2016 1:51:15 PM



MaxxTow Anti Rattle Clamp Review- Video

MaxxTow Anti Rattle Clamp Review

Today we're going to be taking a look at the MaxxTow Anti-Rattle Clamp. This is designed for 2" trailer hitch receivers. The part number is MT70258. To start off we're going to head out to the test course with just a standard cargo carrier loaded down with 200 pounds. As you can see as we head though the slalom there's some side-to-side movement with our carrier. You can imagine once the capacity we're to get up closer to 300, 400, or 500 pounds, how much movement we'd actually have side-to-side. It may give you a sensation of movement inside the truck, which might not be comfortable. more


Watch Video

4/4/2016 3:56:06 PM



Trailer Valet XL Trailer Dolly Review- Video

Trailer Valet XL Trailer Dolly Review

Today, we're going to be taking a look at the Trailer Dolly XL. Now this is available in 2 different models. One model comes with a 2 inch ball. And the toher model comes with the 2-5/16 inch ball. When the time comes to move or align your unhitched trailer, the Trailer Valet XL is at your service. The Trailer Valet has an integrated drive system which makes moving the trailer very easy. Now, one of the key features about the Trailer Valet XL is it's ability to be used with the included drill bit. more


Watch Video

3/29/2016 1:55:37 PM



Brophy Hitch Accessories CP91 Review- Video

Brophy Hitch Accessories CP91 Review

Today we're going to be taking a look at the Brophy Clevis Pin. This is a 3/4 inch diameter pin that's going to let you hook up your equipment to your hitch mounted clevis. Your hitch mounted clevis is sold separately. If you're in need of one or you'd like you purchase a new one, you can find them right here at etrailer.com. This pin is made from a steel construction. It's going to feature a zinc finish, which is going to do a great job at resisting rusting, corrosion, and it's going to come with the clip. Here on this end it's got the pull tab for easy installing and removing. more


Watch Video

3/2/2016 10:35:45 AM



  1     2     3