Enclosed Trailer Parts Installation And Review Videos


Review of Redline Enclosed Trailer Parts - Butterfly Vent - 371800- Video

Review of Redline Enclosed Trailer Parts - Butterfly Vent - 371800

more


Watch Video

6/19/2020 5:27:08 PM



Review of Rumber Enclosed Trailer Parts - Horse Trailer Parts - 9901-0- Video

Review of Rumber Enclosed Trailer Parts - Horse Trailer Parts - 9901-0

Today we're going to take a look at the Rumber horse trailer saddle rack. Now, this saddle rack will keep your saddle accessible and off the ground. It is designed to slide over and secure to your horse trailer swing arm for easy access. Has a nice texture and exterior to reduce slippage, keeps the saddle on the rack, and it is designed to fit most saddles. It is an environmentally friendly construction, very easy to maintain. It's made of recycled plastics, which provide extra durability, and it is capable of withstanding temperature extremes without cracking or warping. more


Watch Video

2/17/2020 7:47:32 AM



Review of Rumber Enclosed Trailer Parts - Horse Trailer Parts - 4461-8- Video

Review of Rumber Enclosed Trailer Parts - Horse Trailer Parts - 4461-8

Today we're going to take a look at the Rumber horse trailer bridle hooks. These bridle hooks allow you to keep your bridles from getting tangled as you're transporting them. This is designed to mount to the interior wall of your horse trailer for easy access. If you notice, it does not come with any pre-drilled holes so you can pretty much mount it wherever you need to. Does use environmentally-friendly construction. It's very easy to maintain. more


Watch Video

2/14/2020 2:27:05 PM



Review of Rumber Enclosed Trailer Parts - Horse Trailer Parts - 2002MBT- Video

Review of Rumber Enclosed Trailer Parts - Horse Trailer Parts - 2002MBT

Today we're going to take a look at the Rumber horse trailer brush box. Now, this box will provide a nice, convenient storage space for your horse accessories. It's designed to mount to the interior wall of your horse trailer for easy access. Now, it does not come with any pre-drilled holes so you can mount it anywhere you need to, and it does use environmentally friendly construction, makes it easy to maintain. It's made of recycled plastics which provide extra durability, and it is capable of withstanding temperature extremes without cracking or warping. This part is made in the USA. more


Watch Video

2/13/2020 1:27:12 PM



Race Ramps Trailer Step Review- Video

Race Ramps Trailer Step Review

more


Watch Video

12/13/2019 12:03:20 PM



Review of TRC Enclosed Trailer Parts - Ramp Door Dog Ear Bracket - 362DOGEARS- Video

Review of TRC Enclosed Trailer Parts - Ramp Door Dog Ear Bracket - 362DOGEARS

Today we'll be taking a look at the dog ear for ramp doors on enclosed trailers.This is going to be just a little piece to weld onto the ramp door for your enclosed trailer to help attach the cable from your spring assembly. That spring assembly would be sold separately. You can find those right here at etrailer.com to replace any of those parts.This is made of a steel construction. The base of that little dog ear piece is about three inches wide. The one I have here is a little bit longer, about three and an eighth. The top is about three quarters of an inch wide. more


Watch Video

7/2/2019 10:02:23 PM



Redline 2-Piece Polypropylene Trailer Vent Review and Installation- Video

Redline 2-Piece Polypropylene Trailer Vent Review and Installation

Jake: Hey guys, it's Jake here with etrailer. Today we're going to be taking a look at the Redline half-moon trailer vent. This is going to allow fresh air to get in and hot air to get out without having to worry about getting any water inside your trailer.In this kit, you are going to get the outside vent and the inside receiver so that you can have a nice clean look on the inside of your trailer. This is really going to be important for if you have a wall inside your trailer like we do, but if you don't have a wall, you can just use this part and you'll be able to mount it to the outside of your trailer and get fresh air without having to worry about any water.So you can buy these as a kit or you can buy them separately. Now here you'll see we have our vent in black. It's also available in white if you'd like to match it to your white trailer.Here's that piece on the inside wall that we we're talking about. more


Watch Video

6/7/2019 1:07:33 PM



Buyers Products Traffic Cone Holders Review- Video

Buyers Products Traffic Cone Holders Review

Hey guys, it's Jake here at etrailer. Today we're going to be taking a look at the line of Buyer's Products emergency cone holders. This is going to be able to hold your emergency cone, so they don't go anywhere while you're traveling on the road. And, it gives them a nice, convenient storage space.Here you can see we're using our horizontal mount holder. But, you can also pick up a vertical mount holder. You just need to decide which one will suit your needs best, just see etrailer.You're going to have four mounting holes, so that you can easily straddle any c-channel or tubing on your trailer. more


Watch Video

5/29/2019 10:35:34 AM



Review of Redline Enclosed Trailer Parts - Horse Trailer 60 Pad - HTP60BK- Video

Review of Redline Enclosed Trailer Parts - Horse Trailer 60 Pad - HTP60BK

Today we'll be taking a quick look at the horse trailer side pad. This is going to keep your equine friends safe and protected while you're out on the road, gives them something to help protect at that side portion of your horse trailer. It's made of a durable black vinyl material so it'll be easy to wash off and keep clean, and also be resistant to any kind of mold or mildew.The back is just a stapled-on application over some kind of cardboard material, so to mount this up you'll probably want to use some screws at the top or any kind of flat rivets, something like that, to get this attached. It doesn't come with any hardware, so you will have to figure that out on your own, and it's really going to depend on your application in how you want to do that and the construction of your trailer as well.Inside there, we'll have our two inches of foam. It has a pretty good solid feel to it. It doesn't feel like it's going to get too compressed. more


Watch Video

5/23/2019 8:02:25 PM



Review of Surehoof Enclosed Trailer Parts - Horse Trailer Parts,Mats - 3622RM- Video

Review of Surehoof Enclosed Trailer Parts - Horse Trailer Parts,Mats - 3622RM

Today we're going to take a quick look at the ribbed rubber trailer mat. This is going to be a good addition to your enclosed trailer, especially if you're hauling anything that might need a little cushioning. Especially if we're using this in a horse trailer or something like that, we want to make sure that our friends have a better ride, sort of reduce any swollen hocks that we might encounter, lessen sore legs there. It's a pretty nice thick mat. If you pull that back you'll see it has that ribbed texture, it helps to channel in any water and dirt whenever we go to hose this off. Makes it a little easier. more


Watch Video

5/1/2019 6:58:05 PM



Review of Race Ramps Enclosed Trailer Parts - Steps - RR-2STEP-24- Video

Review of Race Ramps Enclosed Trailer Parts - Steps - RR-2STEP-24

Today we're going to take a quick look at the Race Ramps Trailer Step. Now, this is going to be an easy way to get in and out of your trailer if that's an enclosed trailer, or maybe you have some stuff loaded up pretty high on your open trailer. This is going to make it easy to get to that and get inside and get anything else out that we might need. Has a nice wide step with a good amount of space, so we'll have plenty of room to get in and out. We don't have to worry about any tripping or stumbling with this.It's a lightweight enough step that it's easy to transport and carry around. There's some little pocket cutout holes on the sides makes it easy to get a good grab on this and set it in place. more


Watch Video

3/27/2019 7:45:22 PM



Buyers Products Trailer Cargo Organizers - Hooks and Hangers - 337TCH10V Review- Video

Buyers Products Trailer Cargo Organizers - Hooks and Hangers - 337TCH10V Review

Speaker 1: Today we're taking a look at the Buyers Products traffic cone holder. This traffic cone holder allows easy stacking and storing in tight spaces. It can fit up to 10 18" cones or 5 28" cones. It's made from a durable carbon steel and features a really nice corrosion resistant, silver, powder coated finish with a zinc plated base. It features the vertical pre-drilled mounting plate for mounting on any flat surface, mounting hardware not included.That mounting plate, edge to edge going this direction, is about 6 7/8". Edge to edge going this direction is about 3". more


Watch Video

11/15/2018 7:40:05 AM



Polar Hardware Enclosed Trailer Parts - Vents - PLR20 Review- Video

Polar Hardware Enclosed Trailer Parts - Vents - PLR20 Review

Today we're going to be taking a look at the Polar Multi-Purpose Ventilator. This is an aluminum ventilator that's supplied with an internal closure to open and close the vent. When air circulation is needed just slide the lever here at the base to open and close the vents. So close right there, slide it over to open it. Very easy to do. Nice fluid motion. The back of the unit is going to feature four 2" diameter holes to easily allow airflow. more


Watch Video

12/27/2016 2:39:44 PM



Polar Hardware Enclosed Trailer Parts - Steps - PLR900 Review- Video

Polar Hardware Enclosed Trailer Parts - Steps - PLR900 Review

Today, we're going to be taking a look at the Polar Hardware Folding Assist. This Assist can be mounted almost anywhere that you need some help getting into and out of the truck or trailer. It's going to be great for buses, work trucks, industrial applications, things along those lines. Really nice design. We've had a few customers that have used this for a couple different purposes. We've had an individual that put it on a dump truck to help gain access to those hard to get or hard to access areas. We also had another individual put it on a trailer to help gain access to the view stack 00:00:34 area of the trailer. more


Watch Video

12/27/2016 11:38:34 AM



Polar Hardware Enclosed Trailer Parts - Vents - PLR1715 Review- Video

Polar Hardware Enclosed Trailer Parts - Vents - PLR1715 Review

Today we're going to take a look at the Polar Hardware side cowl ventilator with the screen. This is made of a 20 gauge cold rolled steel construction. Has a nice zinc plating for corrosion resistance. This can be a weld on or rivet on installation. We're going to give you a few measurements on this and just to show you how this operates, you can see the lid is open. That's with it closed. more


Watch Video

5/16/2016 12:35:48 PM



Polar Hardware Enclosed Trailer Parts - Vents - PLR1700 Review- Video

Polar Hardware Enclosed Trailer Parts - Vents - PLR1700 Review

Today, we're going to be taking a look at the Double Action Side Ventilator from Polar Hardware. This has a two-way action that's going to allow for air intake or air exhaust. You can see on the back, we have the grab handle. That's going to be how we open the unit. I've got it open on this side right now. If I swing that handle to the other side, it allows this half to open. more


Watch Video

3/31/2016 2:35:47 PM



Polar Hardware Enclosed Trailer Parts - Vents - PLR24-004 Review- Video

Polar Hardware Enclosed Trailer Parts - Vents - PLR24-004 Review

Today we're going to be taking a look at the butterfly vent and gasket from Polar Hardware. The butterfly vent is going to provide ventilation for your trailer, or whatever it is you'd like to install it on. This can also be used with the Polar roof ventilator. Model PLR24. The unit's going to be made form aluminum lightweight construction, that's going to be highly resistant to rust and corrosion. The vent is going to include this nice little gasket here. more


Watch Video

1/19/2016 10:35:47 AM



Polar Hardware Enclosed Trailer Parts - Vents - PLR24-002 Review- Video

Polar Hardware Enclosed Trailer Parts - Vents - PLR24-002 Review

Today we're going to be taking a look at the butterfly vent and the gasket from Polar Hardware. The butterfly vent is going to provide ventilation for your trailer or whatever it is that you would like to install it on. This can be used with polar roof ventilator. The PLR24 model. The unit is going to be made from a stainless steel construction, and it's going to have a nice polished finish. The unit is rust and corrosion resistant. You can see that it includes the vent and it's going to include the gasket. more


Watch Video

1/19/2016 10:05:47 AM



Redline Enclosed Trailer Parts - Vents - HMAV2-AVT2 Review- Video

Redline Enclosed Trailer Parts - Vents - HMAV2-AVT2 Review

Today, we're going to be taking a look at part number HMAV2-AVT2. This is the 2-Piece Polypropylene Trailer Vent. The trailer vent is going to provide continuous ventilation for your enclosed trailer. To increase your ventilation, you can install more than 1 vent, but with this part number, you're going to get these 2 pieces. The 2-piece design is going to create a low-profile vent that's very attractive both inside and outside your trailer. The half-moon piece with the flat slotted side is going to attach to the trailer's exterior. more


Watch Video

7/29/2015 11:05:48 AM



Race Ramps 36 Inch Trailer Step Review- Video

Race Ramps 36 Inch Trailer Step Review

Today we're going to be taking a look at the 36 inch Race Ramps trailer step, part number RR-TR-SP-36. The 36 inch Race Ramps trailer step is the perfect solution for getting into and out of your trailer. It's also great for gaining access to the top of your trailer or your tow vehicle. It measures 36 inches long by 11 1/4 inches wide, and it's 8 inches tall. It offers 3/4 of an inch of ground clearance underneath. The handles make it easy to carry and maneuver. more


Watch Video

6/9/2015 7:41:29 AM



Race Ramps 30 Inch Trailer Step Review- Video

Race Ramps 30 Inch Trailer Step Review

Today we're going to be taking a look at the thirty inch Race Ramps Trailer Step, part number RR-TR-SB-30. The thirty inch Race Ramp Trailer Step is the perfect solution for getting into, and out of, your trailer. It's also great for accessing the top of trailers, and tow vehicles. It measures thirty inches long, by eleven and a quarter inches wide, and it's eight inches tall. The feet offers three quarters of an inch underneath. The steps make it easy to carry and maneuver. more


Watch Video

6/9/2015 7:41:25 AM



Race Ramps 24 Inch Trailer Step Review- Video

Race Ramps 24 Inch Trailer Step Review

Today we're going to be taking a look at the 24 inch Race Ramp Trailer Step, Part Number RR-TR-SP-24. The 24 inch Race Ramp Trailer Step is the perfect solution for getting into and out of your trailer. It's also great for accessing the top of your trailer or tow vehicle. It measures 24 inches long by 16 inches wide, and it's 11 inches tall. It offers us 3 quarters of an inch ground clearance underneath. The handles make it easy to carry and maneuver. It's made out of a dense polystyrene Foam, so it's incredibly lightweight. more


Watch Video

6/9/2015 7:41:21 AM



DeeZee Universal Utility Mat for Trucks and Trailers Review- Video

DeeZee Universal Utility Mat for Trucks and Trailers Review

Today we're going to take a look at the Dee Zee Universal Utility Mat for trucks, trailers, or simply just a work bed, part number DZ85009. Now our utility or skid guard mat has an extra thick rubber so it's very durable, will resist cracking and tearing, and even extreme temperatures. It can withstand common fuel and oil spills. The rubber cleats on the bottom will help keep the mat in proper position and allow for any water drainage that may get underneath the mat. As you can see, it's also great for your shop or garage floor. It keeps spills off the floor and adds cushion for any fatigue to make an easier working environment. The universal mat can also be trimmed to fit certain applications by using a utility knife and cutting out to go around obstacles. This mat is made in the USA. more


Watch Video

1/7/2015 2:46:51 PM



Redline Enclosed Trailer Parts - Vents - WHMAV2-WAVT2 Review- Video

Redline Enclosed Trailer Parts - Vents - WHMAV2-WAVT2 Review

Rate your transcript OrderClientKevin BrossRef #20641Order #TC0921328698 Today we'll reviewing part number WHMAV2-WAVT2, This is Red Line's two piece polypropylene trailer vent for three inch diameter holes. It's in a nice bright, white color. The trailer vent is going to provide a nice continuous ventilation for your enclosed trailer. To increase ventilation you could always add an extra vent. The two piece design creates a low profile vent that's attractive both inside and outside your trailer. This piece right here is a half-moon piece with a flat slotted side that's going to attach to the trailer's exterior. The slots are on one side only allowing you to position the vent for best air flow and to help prevent water from getting in. more


Watch Video

8/18/2014 1:47:08 PM



Lippert RV Electric Sliding Step Installation - 2006 Freightliner Sprinter- Video

Lippert RV Electric Sliding Step Installation - 2006 Freightliner Sprinter

Today on our 2006 Sprinter, we'll be installing the Lippert RV Electric Sliding Step, part number LC285306. We'll go ahead and review the operation. With the RV battery power on and the door switch on, we'll simply open up the screen door and it will extend the step, also turning on the step illumination light. Then when we close the door, it will retract the step. Now we'll go ahead with our install. To begin our install, we'll first need to remove the old or manufacturer's step. To do this, we'll start by removing the old electrical. We'll remove the 4-pin plug by pulling back on the lock connector and then separating the two connections. more


Watch Video

7/7/2014 1:04:46 AM



Redline 2-1/2" Rubber Bumper Review- Video

Redline  2-1/2

Male: Today in our enclosed trailer, well be installing the Redline rubber bumper in the 2-1/2 round, part number 385800. To mount the new Redline rubber bumpers, were going to be using the Redline inch-and-a-half long standard torx trailer floor and wall liner screw, part number TFX150. Were going to begin here by opening up the side door. We need to undo the chain that limits how far the door can open. This customer would like the door to open all the way up to allow him to load an ATV in through the side door.Now that we have the chain removed, were going to go ahead and open the door all the way up and line up where well need to mount our new rubber bumpers on the side of the trailer. The rubber bumpers will be mounted to keep the side door from opening all the way up and making contact with the outside of the trailer. more


Watch Video

1/28/2014 5:01:53 PM



Redline Enclosed Trailer Parts - Horse Trailer Parts - WN2835KIT Review- Video

Redline Enclosed Trailer Parts - Horse Trailer Parts - WN2835KIT Review

Today, we're going to review part number WN2835KIT. This is the Redline Window Net for Horse Trailers. This window net will keep your animal's head from peaking out of the trailer which could prevent possible head trauma and eye damage from bugs, debris or other road obstacles. This net is made from a polycoated nylon cord which allows air to pass through, but it is tear resistant and resistant to mold when exposed to moisture or high humidity. The material is a tear resistant. Now, the kit will include four of these double end snaps which will attach to the holes in the net. more


Watch Video

9/18/2012 3:21:11 PM



Redline Enclosed Trailer Parts - Horse Trailer Parts - HTP12BK Review- Video

Redline Enclosed Trailer Parts - Horse Trailer Parts - HTP12BK Review

Today, we're going to review part number HTP12BK. This is the Redline Horse Trailer Escape Door Pad. This pad is designed to be use on the inside of a horse trailer. It is used to provide maximum protection and comfort for the horse. This will protect the horse when it moves in the trailer and when it hits instead hitting the bare wall. If you have this pad on the wall, it will help protect the horse. more


Watch Video

9/18/2012 1:27:24 PM



Stromberg Carlson Enclosed Trailer Parts - Stairs and Steps - TS-100 Review- Video

Stromberg Carlson Enclosed Trailer Parts - Stairs and Steps - TS-100 Review

Today, we're going to review part number TS-100. This is the Stromberg Carlson Safety Thread Step Cover. This safety thread step cover uses a two-color diamond pattern to highlight your step position even in low light. The soft rubber diamonds provide additional traction and even help keep your RV's floor clean. It's a two-color diamond pattern for greater visibility. They are a rubber diamond for increased traction and the textured surface helps to trap dirt and sand to keep your RV clean. more


Watch Video

9/14/2012 3:20:31 PM



Polar Hardware Enclosed Trailer Parts - Doors - 383700 Review- Video

Polar Hardware Enclosed Trailer Parts - Doors - 383700 Review

more


Watch Video

9/14/2012 11:21:59 AM



Redline Enclosed Trailer Parts - Doors - 385800 Review- Video

Redline Enclosed Trailer Parts - Doors - 385800 Review

Today were going to review part 385800. This is the Redline Rubber Bumper. This small rubber bumper can be used as a door stop, a handle cushion, a dock bumper and many other things. Its constructed of a hard rubber compound. The overall diameter on this is 2 inches. The total height on this would be 1 inch. more


Watch Video

9/13/2012 2:17:15 PM



Lippert RV Manual Pull-Out Step Installation- Video

Lippert RV Manual Pull-Out Step Installation

Today were going to install the Stromberg Carlson RV manual pull out step with a 9 inch drop part #: SM-24-39. Now weve already measured for the replacement stairs. All well need to do is to locate the four mounting points for our stairs. Youll see here that there are four carriage bolts with a lock washer and a nut on the other side. We can go underneath the trailer and undo the fascia allowing us to get our arm up and undo the nuts for the stairs mounting. Now here on the well repeat the same process removing the bolts holding the fascia on. more


Watch Video

6/10/2012 11:25:48 PM



Measuring for an RV Manual Pull-Out Step- Video

Measuring for an RV Manual Pull-Out Step

Today we're going to show you how to measure for the RV manual pull out steps and attachment out rigger. Now the biggest difference between these steps is the depth of the bottom stair from the center of the attachment point at the top of the mounting plate. First, we need to measure the width of the stair assembly. In this case, it's 27 1/2 inches. We'll also measure the stair height which is 9 inches. The third measurement that we need to take is from the center of the step assembly here at the top at the cross bar and make a diagonal line straight down to the edge of the bottom stair. more


Watch Video

6/9/2012 7:25:34 AM



MaxxAir Enclosed Trailer Parts - Vents - MA04000K Review- Video

MaxxAir Enclosed Trailer Parts - Vents - MA04000K Review

Today, we're looking at the MaxxAir MaxxFan Trailer Roof Vent with 12V Fan, part number: MA04000K. It's a reversible, variable speed fan that allows you to precisely control the air movement in and out of your RV. It requires a 12-volt DC power with a minimum of 5-amp service. It has a rough size opening of a 14-1/4" X 14-1/4" It comes with a two-year limited warranty and a limited life-time warranty on the lid. We turn our vent over, we can see that it comes with an inside trim ring for mounting to the interior ceiling of your RV and trailer, positive and ground wire leads to the fan, fan controls, and a manual crank nob for opening and closing the vent door. There you have it for the MaxxAir MaxxFan Trailer Roof Vent with 12V Fan, part number: MA04000K.. more


Watch Video

11/16/2011 12:06:12 PM



  1