Hitch Cargo Carrier Installation And Review Videos


Curt Hitch Cargo Carrier Review- Video

Curt Hitch Cargo Carrier Review

Today we're going to be taking a look at our 17x46 Curt Cargo Carrier. It's both 1 1/4" and 2" hitches. It's part number is C18145. This hitch mounted, basket style cargo carrier is going to allow you to tote extra gear. This is going to free up space in your vehicle for pets or passengers and it's also going to allow you to keep muddy and dirty items outside of your vehicle, so it's not dirtying up the interior. The raised side rails that go all the way around the carrier are going to help to hold the gear in place, as well as the steel construction and the corrosion resistant finish. It's going to allow you to connect anywhere on your carrier that you'd like with a strap or a tie down without having to worry about scratching the finish and creating places where corrosion might occur. The carrier has a nice open floor design. more


Watch Video

Curt Hitch Cargo Carrier Test Course- Video

Curt Hitch Cargo Carrier Test Course

Here on our test course, we'll start by going through the slalom. This is going to show us the side-to-side action and simulates turning corners or evasively maneuvering. Once we get to the alternating speed bumps, we'll see the twisting action. This will simulate hitting a curb or a pothole or driving over uneven pavement. Once we get to the full speed bumps, we'll see the up and down action. This will be just like driving in and out of parking lot, parking garage or driveway. more


Watch Video

Curt Hitch Cargo Carrier Review - 2013 Acura ILX- Video

Curt Hitch Cargo Carrier Review - 2013 Acura ILX

more


Watch Video

Curt 17x46 Hitch Cargo Carrier Review - 2015 Buick Enclave- Video

Curt 17x46 Hitch Cargo Carrier Review - 2015 Buick Enclave

Today, on our 2015 Buick Enclave, we'll be doing a test fit of the Curt Cargo Carriers, 17x46 inch, 500 pound capacity, steel constructed, cargo carrier for 1-1/4 inch and 2 inch hitches. We have a 2 inch hitch here today, so let's go ahead and put on our carrier. It's going to be part number C18145. Insert that into your 2-inch receiver, just make sure your plastic adapter gets in there the right way, there you go. Then we'll go and line up our pin holes. Once you got your pin holes lined up go ahead and insert your anti-rattle bolt that's included and thread that in as far as you can by hand. more


Watch Video

Curt Hitch Cargo Carrier Review - 2012 Buick Enclave- Video

Curt Hitch Cargo Carrier Review - 2012 Buick Enclave

Today on our 2012 Buick enclave, we'll be test fitting the curt 20 X 48 cargo carrier part no. C18145. A quick note about this cargo carrier, it will work in both inch and 1/4 and 2 inch hitches using the included space We will slide the cargo carrier shink into the hitch we'll lign up the hitch pin hole and insert our anti retal bolt. We can then tighten it down with a wrench. Once it's tight, our cargo carrier is secured to the vehicle and we can go ahead and load it up. We'll go ahead and give you a few measurements on our cargo carrier, the insert dimentions of our cargo carrier arre 46 and 3/8 inches long by 17 and 1/2 inches wide by 5 and 1/2 inches tall. more


Watch Video

Curt 17x46 Hitch Cargo Carrier Review - 2013 Cadillac SRX- Video

Curt 17x46 Hitch Cargo Carrier Review - 2013 Cadillac SRX

Today on our 2013 Cadillac SRX we will be test fitting the CURT cargo carrier. That's part number C18145. Now it's dimensions are 17 by 46 and it has a max capacity of 500 pounds. We can go ahead and start by inserting our shank into our our receiver. Real quick, you can use it for 1-1/4" or 2" hitches, so we have this little adapter here for our 2" hitch today. We can go ahead and insert our shank into our receiver. more


Watch Video

Curt Hitch Cargo Carrier Review - 2013 Chevrolet Avalanche- Video

Curt Hitch Cargo Carrier Review - 2013 Chevrolet Avalanche

Today on our 2013 Chevrolet Avalanche we'll be test fitting the Curt 20 x 48 Cargo Carrier, part number c18145. To begin our test fit we want to make sure that our shank has the adapter on it. Then we'll place the shank of our carrier into the receiver tube of our hitch, line up the pin hole, and thread in our anti-rattle bolt tightening it with a wrench. Now we'll go ahead and go over some clearance measurements. We have a ground clearance of 16 inches. The closest part of the carrier to the rear of the vehicle is 2 1/2 inches. more


Watch Video

Curt 17x46 Hitch Cargo Carrier Review - 2011 Chevrolet Avalanche- Video

Curt 17x46 Hitch Cargo Carrier Review - 2011 Chevrolet Avalanche

Today on our 2011 Chevrolet Avalanche, we're going to do a test fit on the 17 x 46 Curt Cargo Carrier. Now as you can see here, they have designed this for use with inch and a quarter or with the hardware two inch hitches, part number on it is C18145. Now this compact cargo carrier is still going to offer us a very large five hundred pound weight capacity, so you're not giving up anything other than a little bit of space with it as compared to some of the other ones. The first step is that we need to slide the shank into the receiver tube of our hitch and line up our threaded hole with our hitch pinhole. With those in line, we've got an anti-rattle bolt which is provided. We're going to place that in and begin threading it through. As you can see, when we just have it hand tight, we've still got some play and some movement to our carrier. more


Watch Video

Curt Hitch Cargo Carrier Review - 2011 Chevrolet Aveo- Video

Curt Hitch Cargo Carrier Review - 2011 Chevrolet Aveo

Alright. Today on this 2011 Chevrolet Aveo, were gonna do a test fit of part number C18145 from Curt. A few details to know about this cargo carrier is that you can use 1 -inch receiver hitches both class 1 and class 2. However, with a class 1 receiver youre limited to a capacity of 200 lbs and with our class 2 receiver hitch, youre limited to 350 lbs. And when you use a cargo with the provided spacer for a 2-inch receiver hitch, you can carry 500 lbs. Were gonna start off our test fit by installing the bike rack into the hitch. more


Watch Video

Curt Hitch Cargo Carrier Review - 2014 Chevrolet Cruze- Video

Curt Hitch Cargo Carrier Review - 2014 Chevrolet Cruze

Today on our 2014 Chevrolet Cruise, we're going to be test fitting the 17 by 46 Curt Cargo Carrier for inch and a quarter and two inch hitches. It's made of steel with a 500 pound weight capacity. It's part number is C18145. To begin our test fit, we're going to slide the shank of the carrier into the receiver tube of our hitch. We'll line up our pin holes, thread in our anti-rattle bolt and tighten it down with a wrench. We can then secure it with the provided clip. more


Watch Video

Curt 17x46 Hitch Cargo Carrier Review - 2015 Chevrolet Equinox- Video

Curt 17x46 Hitch Cargo Carrier Review - 2015 Chevrolet Equinox

Today on our 2015 Chevrolet Equinox we're going to be doing a test fit on the 17 by 46 CURT compact cargo carrier. They've designed this for use with 1-1/4" or 2" hitches. It's going to offer up to a 500 pound weight capacity. Part number on it is C18145. Now to begin our test fit we slide the shank of the carrier right into the receiver tube of our hitch. As we slide this in we want to line up the threaded hole here with our hitch pinhole. With those lined up we can take the provided anti-rattle bolt; going to slide that in and begin to thread it through. more


Watch Video

Curt 17x46 Hitch Cargo Carrier Review - 2014 Chevrolet Equinox- Video

Curt 17x46 Hitch Cargo Carrier Review - 2014 Chevrolet Equinox

Today on our 2014 Chevrolet Equinox we're going to do a test fit on the Curt 17x46 Cargo Carrier. Now, they've designed this for use with either two inch hitches or with inch and a quarter. Offers up to a five hundred pound weight capacity. Part number on it is C18145. To begin our test fit we'll slide the shank of our carrier right into the receiver tube of our hitch. As we do we want to line up our threaded pin hole with our hitch pin hole. more


Watch Video

Curt Hitch Cargo Carrier Review - 2013 Chevrolet Equinox- Video

Curt Hitch Cargo Carrier Review - 2013 Chevrolet Equinox

Today on our 2013 Chevrolet Equinox well be test fitting the Curt 20 by 48 cargo carrier for both inch and a quarter and two inch hitches, part number C18145. Now to begin our test fit weve already installed the included adapter for the two inch hitch. Well slide our cargo carrier shank into the hitch, line up the hitch pin hole, and install and tighten down our anti-rattle bolt. With the bolt tight our cargo carrier is secure to the vehicle. Well now go ahead and give you a few measurements. From the closest point of the cargo carrier to the back of the vehicle is two and a quarter inches. more


Watch Video

Curt 17x46 Hitch Cargo Carrier Review - 2005 Chevrolet Equinox- Video

Curt 17x46 Hitch Cargo Carrier Review - 2005 Chevrolet Equinox

Today on our 2005 Chevy Equinox, we're going to be test fitting the Curt 17X46 cargo carrier for 1 1/4 and 2-inch hitches, part number C18145. We'll begin our test fit by inserting the shank of the rack into the hitch on our vehicle. This does have the 1 1/4 to 2 inch adapter so it helps to keep a hand on that as you slide it in. You'll then want to line up your hitch pinholes and insert the included threaded anti-rattle hitch bolt. We'll go ahead and get that as tight as we can by hand. We'll then take our wrench and finish it off. more


Watch Video

Curt 17x46 Hitch Cargo Carrier Review - 2014 Chevrolet Malibu- Video

Curt 17x46 Hitch Cargo Carrier Review - 2014 Chevrolet Malibu

Today on our 2014 Malibu, we're going to be test fitting the 17x46 Curt Cargo Carrier. They designed this for use in inch and a quarter hitches, it also has the two inch adapter if you want to go from one car to another with it. They offer up to a five hundred pound weight capacity with it. The part number is: C18145. To begin the test fit, you just slide the shank right into the receiver tube of our hitch. Now we want to slide it in far enough so that the threaded hole lines up with our hitch pin hole. more


Watch Video

Curt 17x46 Hitch Cargo Carrier Review - 2015 Chevrolet Silverado 1500- Video

Curt 17x46 Hitch Cargo Carrier Review - 2015 Chevrolet Silverado 1500

Today on our 2015 Chevrolet Silverado 1500 model, we're going to do a test fit on the Curt 17 by 46 cargo carrier. They've designed this so you can use it with inch and 1/4 or 2 inch hitches. It has a 500 pound weight capacity. The part number on it is C18145. To begin our test fit, we're going to slide the shank of our carrier into the receiver tube of our hitch. Need to line up our threaded hole with our hitch pin hole. A little too far. more


Watch Video

Curt 17x46 Hitch Cargo Carrier Review - 2014 Chevrolet Silverado 1500- Video

Curt 17x46 Hitch Cargo Carrier Review - 2014 Chevrolet Silverado 1500

Today on our 2014 Chevrolet Silverado 1500 Crew Cab, we're going to be test fitting the Curt 17 x 46 Cargo Carrier, part number C18145. We'll begin our test fit by inserting the shank of our rack into our hitch. I went ahead and left the hitch bolt on because the adapter. This does fit both 1-1/4 and 2-inch hitches. The adapter slides right off. I just left it on to hold it in place as I was inserting the shank. We'll go ahead and align the hitch-pin holes up. more


Watch Video

Curt Hitch Cargo Carrier Review - 2013 Chevrolet Sonic- Video

Curt Hitch Cargo Carrier Review - 2013 Chevrolet Sonic

Today on our 2013 Chevy Sonic, well be test fitting the Curt 20x48 Cargo Carrier, part number C18145. Now to begin our test fit, well slide the shank of the carrier into the opening of the hitch, line up our pinholes, thread our anti-rattle bolt through the pinholes and tighten with a wrench. Now well go ahead and go over a few clearance measurements to see the cargo carrier and this vehicle will fit together. There is about 11 inches of ground clearance from the rear of the carrier. The closest part of the carrier to the closest part of the vehicle here at the rear bumper is about three inches. Weve added a total of 22 inches to the overall length of the vehicle. The closest part of the carrier to the closest part of the vehicles exhaust tip is about nine inches apart. more


Watch Video

Curt 17x46 Hitch Cargo Carrier Review - 2015 Chevrolet Suburban- Video

Curt 17x46 Hitch Cargo Carrier Review - 2015 Chevrolet Suburban

Today on our 2015 Chevrolet Suburban we will be test fitting this CURT cargo carrier. That's part number C18145. It has dimensions of 17 by 46. Has a max capacity of 500 pounds. It can be used for 2" hitches as well as 1-1/4". We can go ahead and start by inserting our shank into receiver. more


Watch Video

Curt Hitch Cargo Carrier Review - 2013 Chevrolet Suburban- Video

Curt Hitch Cargo Carrier Review - 2013 Chevrolet Suburban

Today on our 2013 Chevrolet Suburban. We'll be test fitting the 17x46 Curt Cargo Carrier part number C18145. We'll begin our test fit by sliding the shank of the carrier into the opening of the hitch. After lining up the pinholes, we'll thread in our anti rattle bolt and tighten it down using a wrench. When installing, it may take a few tries to get the pinholes to align between the hitch and the carrier. With the carrier secured, we'll go over a few clearance measurements to see how the two fit together. We have about a 20 and three quarters inches of ground clearance, closest part of the carrier, to the closest part of the vehicle, is about 3 and 3 quarters of an inch away. more


Watch Video

Curt Hitch Cargo Carrier Review - 2012 Chevrolet Suburban- Video

Curt Hitch Cargo Carrier Review - 2012 Chevrolet Suburban

Today on our 2012 Chevy Suburban, were going to test fit the Curt Cargo Carrier for 1-1/4-inch and 2-inch hitches part number C18145. With our vehicle already equipped with the 2-inch hitch and our cargo carrier already preassembled with the 2-inch bushing for 2-inch hitches on our cargo carrier shank, were ready to go ahead and insert the cargo carrier shank into the receiver tube of the hitch. Well line up the hitch pinholes and install and tighten down our anti-rattle bolt and safety clip. As you can see, once weve tightened down the anti-rattle bolt, it really takes out any sway or movement between the cargo carrier and the hitch. Now, lets go ahead and take a couple of measurements. From the nearest point of our cargo carrier to the nearest point on our bumper is 3-1/4 inches. more


Watch Video

Curt Hitch Cargo Carrier Review - 2007 Chevrolet Suburban- Video

Curt Hitch Cargo Carrier Review - 2007 Chevrolet Suburban

Today on our 2007 Chevrolet Suburban we will be test fitting the 17 x 46 Curt cargo carrier for 1/4 and 2-inch hitches with a 500-pound weight capacity, part number C18145. To begin our test fit we will slide the shank of the carrier into the receiver tube of the hitch, line up our pin holes, thread in our anti-rattle bolt, tighten it with a wrench and secure it with a clip. Now let's go over a few measurements. At the rear of our carrier we have about 20-1/2 inches of ground clearance. The closest point of the carrier to our rear bumper is about 3-1/2 inches, and we've added about 23 inches to the overall length of the suburban. When opening the rear hatch it breaks over our carrier at about 10 inches. The exhaust on our suburban exits the passenger side and it's turned downward. This will not affect any heat sensitive materials while transporting. That will complete our test fit of the Curt cargo carrier part number C18145 on our 2007 Chevrolet Suburban. more


Watch Video

Curt 17x46 Hitch Cargo Carrier Review - 2015 Chevrolet Tahoe- Video

Curt 17x46 Hitch Cargo Carrier Review - 2015 Chevrolet Tahoe

Today on our 2015 Chevrolet Tahoe, we are going to be doing a test fit on the 17x46 Curt Compact Cargo Carrier. Now this has been designed to use easily with an inch and a quarter or with two inch hitch and it offers a 500 pound weight capacity. Part number on it is C18145. Now to begin our test fit, we'll slide the shank of the carrier into the receiver tube of our hitch. As we do this, we want to line up our threaded hole with our hitch pin hole. With those in place we can take the pin which is provided with the carrier, I'm sorry the bolt which is provided with the carrier, we'll thread it in. As you can see there is still kind of some movement and some play there, it's time to bring in the wrench and get it tightened down. more


Watch Video

Curt Hitch Cargo Carrier Review - 2014 Chevrolet Tahoe- Video

Curt Hitch Cargo Carrier Review - 2014 Chevrolet Tahoe

Today on our 2014 Chevrolet Tahoe we're going to be test fitting the 17 by 46 CURT cargo carrier for both 1-1/4" and 2" hitches. With a 500 pound weight capacity its part number is C18145. To begin our test we're going to slide the shank of the carrier into the receiver tube of our hitch, line up our pinholes, thread in our anti-rattle bolt, and tighten it down with a wrench. We'll then secure it using the provided clip. In this position we have about 22-1/4" worth of ground clearance. The closest point of the carrier to the back of our vehicle is about 3-1/2" away and overall we've added about 22-3/4" to the length of the Tahoe. When opening our rear hatch it does break over the plain of our carrier at about the 10-1/2" mark. The exhaust on our Tahoe exits the passenger side and it's turned downward. more


Watch Video

Curt Hitch Cargo Carrier Review - 2013 Chevrolet Tahoe- Video

Curt Hitch Cargo Carrier Review - 2013 Chevrolet Tahoe

Today on our 2013 Chevy Tahoe we'll be test fitting the Curt 20x48 Cargo Carrier for 1-1/4 and 2 Inch Hitches, part number c18145. To begin our test fit we'll start off by sliding the carrier on to the vehicle. We'll slide the shank of the carrier into the opening of the hitch, line up our pin holes, thread our ant-rattle bolt through the pins and tighten with a wrench.Now with the cargo carrier secured to the vehicle we'll go over a few clearance measurements. For the back of the carrier there is about 22 inches of ground clearance. Closest part of the carrier to the closest part of the vehicle here at the rear bumper is about four inches. We have added 23 inches to the overall length of the vehicle. more


Watch Video

Curt 17x46 Hitch Cargo Carrier Review - 2004 Chevrolet Tahoe- Video

Curt 17x46 Hitch Cargo Carrier Review - 2004 Chevrolet Tahoe

Today on our 2004 Chevy Tahoe, we're going to be test fitting the Curt 17x46 cargo carrier, part number: C18145. We'll begin our test fit by inserting the shank of the rack into our hitch. The adapter is loosely fitted on there, so I like to leave the hitch bolt in just to get it started. We'll remove that and line up our hitch pin holes. Helps to keep a hand on the adapter, just so you don't have to worry about that getting out of position. With the holes in line, we'll thread in the included anti-rattle hitch bolt. more


Watch Video

Curt 17x46 Hitch Cargo Carrier Review - 2003 Chevrolet Tahoe- Video

Curt 17x46 Hitch Cargo Carrier Review - 2003 Chevrolet Tahoe

Today on our 2003 Chevrolet Tahoe, we we'll be test fitting the Curt Cargo Carrier. That's part number C18145. Now its dimensions are 17x46. Has a max capacity of 500 pounds and is used for or it can be used for 1 1/4 or 2 inch hitches. We can go ahead and start by inserting our shank into our receiver. Wait for our pin holes to be lined up and we'll take our included anti rattle bolt and pin and we thread that through and we'll finish tightening that with our wrench and by tightening this it's going to help reduce any play or rattle within our hitch in our cargo carrier. more


Watch Video

Curt 17x46 Hitch Cargo Carrier Review - 2015 Chrysler Town and Country- Video

Curt 17x46 Hitch Cargo Carrier Review - 2015 Chrysler Town and Country

Today on our 2015 Chrysler Town & Country we will be test fitting the CURT cargo carrier. That's part number C18145. Now its dimensions are 17 by 46 and it has a max capacity of 500 pounds, and it can be used for 1-1/4" or 2" hitch. We've got a 2" here today so we're using our little adapter. We can go ahead and begin by inserting our shank into our receiver. We'll line our pinholes up. more


Watch Video

Curt Hitch Cargo Carrier Review - 2013 Dodge Avenger- Video

Curt Hitch Cargo Carrier Review - 2013 Dodge Avenger

Today on our 2013 Dodge Avenger, we'll be testing the Curt 20 by 48 Cargo Carrier Part Number C18145. Now, to begin our test fit, we slide the shank of the carrier into the opening of our hitch. Line up our pinholes and then thread our anti-rattle bolt through the pinholes and tighten with a wrench. Now, we'll go over some clearance measurements to see how our vehicle and our carrier come together. We have a ground clearance of 9 1/2 inches at the rear of our carrier. It's important to note that our bumper does overhang our cargo carrier a little bit. more


Watch Video

Curt 17x46 Hitch Cargo Carrier Review - 2011 Dodge Dakota- Video

Curt 17x46 Hitch Cargo Carrier Review - 2011 Dodge Dakota

Today on our 2011 Dodge Dakota Crew Cab, we will be testing the CURT cargo carrier. That's part number C18145. It's dimensions are 17 by 46. Has a max capacity of 500 pounds. It can be used for either inch and a quarter or 2 inch hitches. We can go ahead and start by loading our shank into our receiver. Go ahead and line our pin holes up. more


Watch Video

Curt Hitch Cargo Carrier Review - 2013 Dodge Dart- Video

Curt Hitch Cargo Carrier Review - 2013 Dodge Dart

Today on our 2013 Dodge Dart, we'll be test-fitting the Curt 20X48 cargo carrier, part number C18145. To install the cargo carrier, we'll begin by sliding the shank of the cargo carrier into the hitch. We'll line up our hitch pinhole and then install and tighten down our anti-rattle bolt. This makes our cargo carrier secure to our vehicle. At this point, we'll go over a few clearance measurements.We have a ground clearance of 9 1/2 inches, and the closest part of the carrier to the closest part of the rear of the vehicle is about half an inch. We've added 21 inches to the overall length of our vehicle and the exhaust on the dart exits the driver side. more


Watch Video

Curt Hitch Cargo Carrier Review - 2013 Dodge Durango- Video

Curt Hitch Cargo Carrier Review - 2013 Dodge Durango

Today on our 2013 Dodge Durango well be test fitting the Curt 20x48 Cargo Carrier for inch and a quarter and two inch hitches, part number c18145. Now to begin our test fit using the included adapter for the two inch hitch well slide our cargo carrier shank into the hitch, line up the hitch pin hole, and install and tighten down the 00:00:19 bolt. With the bolt tight our cargo carriers secured to the vehicle. Well now go ahead and give you a few measurements. From the closest point of the cargo carrier to the back of the vehicle is two and a half inches, and this cargo carrier will add an additional 22 inches to the overall length of the vehicle itself. Our ground clearance here at the back of the cargo carrier is 12.5 inches. more


Watch Video

Curt Hitch Cargo Carrier Review - 2007 Dodge Durango- Video

Curt Hitch Cargo Carrier Review - 2007 Dodge Durango

Today on our 2007 Dodge Durango, well be test fitting the Curt 20 by 48 Cargo Carrier for 1-1/4 inch and 2 inch Hitches part number C18145. To begin our test fit, well slide the shank of the carrier into the receiver to the hitch. Line up the pin hole and thread in our anti-rattle bolt. Then well tighten it down with a wrench. Now, well go over a few clearance measurements. We have about 19-1/2 inches of ground clearance. more


Watch Video

Curt 17x46 Hitch Cargo Carrier Review - 2015 Dodge Grand Caravan- Video

Curt 17x46 Hitch Cargo Carrier Review - 2015 Dodge Grand Caravan

Today on our 2015 Dodge Grand Caravan we will be test fitting the CURT cargo carrier. That's part number C18145. Now its dimensions are 17 by 46, has a max capacity of 500 pounds, and it can be used for 1-1/4" or 2" hitches. We can go ahead and start by loading our shank into our receiver. We'll get our pinholes lined up. Once we have those lined up we'll take our included anti-rattle bolt and pin. more


Watch Video

Curt Hitch Cargo Carrier Review - 2014 Dodge Grand Caravan- Video

Curt Hitch Cargo Carrier Review - 2014 Dodge Grand Caravan

Today on our 2014 Dodge Grand Caravan we'll be test fitting the Curt cargo carrier for an inch and a quarter and two inch hitches, part number C18145. We'll begin our test fit by sliding the shank of the carrier into the opening of the hitch. We'll thread in our anti-rattle bolt and then tighten it down using a wrench. With the carrier secured, we'll go over a couple clearance measurements to see how the two fit together. We have about twelve inches of ground clearance at the rear of the carrier. The closest part of the carrier to the closest part of the vehicle is about three-quarters of an inch away, and we've added about twenty and a quarter inches to the overall length of our Grand Caravan. Now on this model, the exhaust does exit on the passenger side and points downward about seven inches away. Therefore, it would be alright to carry heat sensitive materials on this cargo carrier. The cargo door does break over the surface of the carrier at about fourteen inches. That will complete today's test fit for the Curt cargo carrier, part number C18145, on our 2014 Dodge Grand Caravan. . more


Watch Video

Curt Hitch Cargo Carrier Review - 2013 Dodge Grand Caravan- Video

Curt Hitch Cargo Carrier Review - 2013 Dodge Grand Caravan

Today on our 2013 Dodge Grand Caravan, we'll be test fitting the Curt 20x48-inch Cargo Carrier, part number C18145. To mount our carrier to the vehicle, we'll insert the shank of the carrier into the receiver tube of the hitch. We'll line up our hitch pin hole, thread in our anti-rattle bolt, and tighten it down using a wrench. Next, we're going to go over some clearance measurements. We've got about 10 inches of ground clearance at the rear of the carrier. We've got about 1-1/2 inches of space between the closest part of the carrier and the closest part of the vehicle, and overall, we've added about 21-1/2 inches of length to the rear of our vehicle. more


Watch Video

Curt Hitch Cargo Carrier Review - 2012 Dodge Grand Caravan- Video

Curt Hitch Cargo Carrier Review - 2012 Dodge Grand Caravan

Today on our 2012 Dodge Grand Caravan well be test fitting the Curt 20x 48 cargo carrier part number C18145. Now our Caravan has a 2-inch hitch on it so well be using the adapter installed on our carrier. To mount the carrier, well insert the shank into the receiver tube of the hitch. Well line up our pinholes and then thread in our anti-rattle bolt, finally tightening it down with a wrench. Next well go over a handful of clearance measurements so you can get an idea of how the carriers going to fit behind the Grand Caravan. Weve got about 11 inches of ground clearance at the rear of the carrier. more


Watch Video

Curt 17x46 Hitch Cargo Carrier Review - 2014 Dodge Journey- Video

Curt 17x46 Hitch Cargo Carrier Review - 2014 Dodge Journey

Today on our 2014 Dodge Journey we're going to be test fitting the 17X46 Curt Cargo Carrier. Its been designed for use with either an inch and quarter or two inch hitch. It offers a 500 pound weight capacity. Part number on it is C18145. To begin our test fit we're going to slide the shank of the carrier right into the receiver tube of our hitch. We'll need to slide it in far enough so that our threaded hole lines up with our hitch pin hole. We can then take our anti-rattle bolt and thread that in. more


Watch Video

Curt Hitch Cargo Carrier Review - 2013 Dodge Journey- Video

Curt Hitch Cargo Carrier Review - 2013 Dodge Journey

Today on our 2013 Dodge Journey, we'll be test fitting the Curt 20x48-inch Cargo Carrier, part number C18145. To mount our carrier to the vehicle, we'll insert the shank of the carrier into the receiver tube of the hitch. We'll line up our hitch pin holes, thread in our anti-rattle bolt, and tighten it down using a wrench. Next, we'll go over a handful of clearance measurements. We've got about 12 inches of ground clearance at the rear of the carrier and 4 inches of clearance between the closest part of the carrier and the closest part of the vehicle. Overall, we've added about 23-1/2 inches of length to the rear of the vehicle. more


Watch Video

Curt Hitch Cargo Carrier Review - 2009 Dodge Journey- Video

Curt Hitch Cargo Carrier Review - 2009 Dodge Journey

more


Watch Video

Curt Hitch Cargo Carrier Review - 2008 Dodge Nitro- Video

Curt Hitch Cargo Carrier Review - 2008 Dodge Nitro

Today on our 2008 Dodge Nitro well be test fitting the Curt 20 inch by 48 inch cargo carrier for one and a quarter and two inch hitches, part number C18145. To mount our carrier to the vehicle well insert the shank of the carrier into the receiver tube of the hitch. Well line up our hitch pin holes, thread in out anti-rattle bolt and tighten it down using a wrench. Next well go over a hand full of clearance measurements. Weve got about 14 inches of ground clearance at the rear of the cargo carrier. Weve got about five inches of clearance between the closest part of our bumper and the closest part of our carrier. more


Watch Video

Curt Hitch Cargo Carrier Review - 2012 Dodge Ram- Video

Curt Hitch Cargo Carrier Review - 2012 Dodge Ram

Today on our 2012 Dodge Ram 1500, we'll be test fitting the Curt 20x48 Cargo Carrier for both inch and a quarter and two-inch hitches, part #C18145. With our vehicle equipped with a two-inch hitch, we've already installed our adaptors so we're ready to go ahead and fit it. We'll simply place the cargo carrier shank into the hitch, line up the hitch pin hole and insert our hitch pin. And with our safety pin installed on the other side of our anti-rattle bolt, our cargo carrier is secured to the vehicle. And this is what it would look like on your truck. Now we'll go ahead and give you a few measurements. more


Watch Video

Curt 17x46 Hitch Cargo Carrier Review - 2013 Fiat 500- Video

Curt 17x46 Hitch Cargo Carrier Review - 2013 Fiat 500

Today on our 2013 Fiat 500 we will be test fitting the CURT cargo carrier. That's part number C18145. It has dimensions of 17 by 46, has a max capacity of 500 pounds, and it can be used for 1-1/4" or 2" hitches. We've got an 1-1/4" hitch today so we can go ahead and begin by inserting our shank into our receiver. We'll line up our pinholes. Once we've got that lined up we'll take our included anti-rattle bolt and go ahead and thread that through. more


Watch Video

Curt Hitch Cargo Carrier Review - 2013 Ford Edge- Video

Curt Hitch Cargo Carrier Review - 2013 Ford Edge

Today on our 2013 Ford Edge, we'll be test fitting the Curt 20" x 48" cargo carrier, part number C18145. To mount our carrier to the vehicle, we'll insert the shank of the carrier into the receiver tube of our hitch. We'll line up our hitch pin hole and then thread in our anti-rattle bolt, tightening it with a wrench. Next, we're going to go over a few clearance measurements. At the rear of the carrier, we have a ground clearance of 11", and the closest point of the carrier to the closest point of our vehicle is about 1-1/2". We've added 20-1/2" to the overall length of our vehicle. more


Watch Video

Curt Hitch Cargo Carrier Review - 2012 Ford Edge- Video

Curt Hitch Cargo Carrier Review - 2012 Ford Edge

Today on our 2012 Ford Edge, we'll be test fitting the Curt 20x48 Cargo Carrier for both 1-1/4 and 2-inch hitches, part number C18145. Now, to begin our test fit, we'll simply slide the cargo carrier shank into the hitch, line up the hitch pinhole, and install and tighten down our anti-rattle bolt. With our bolt tight, our cargo carrier is secured to the vehicle. We'll now go ahead and give you a few measurements. The closest point of the cargo carrier platform to the back of the vehicle is 1-3/4 inches and the cargo carrier will add an additional 21-3/4 inches to the overall vehicle's length. Now, the exhaust exits both the passenger and driver's side's rear of the vehicle and it's approximately 6 inches away. more


Watch Video

Curt Hitch Cargo Carrier Review - 2008 Ford Edge- Video

Curt Hitch Cargo Carrier Review - 2008 Ford Edge

Today on our 2008 Ford Edge, we'll be test fitting the Curt 20x48 Cargo Carrier for 1 1/4 and 2 inch hitches part number C18145. To begin our test fit we've already removed the 2 inch adapter from the cargo carrier shank we'll slide the shank into the hitch, line up t he hitch pin hole and install and tighten down our anti rattle bolt. With the bolt tight our cargo carrier is secured to the vehicle. We'll now go ahead and give you a few measurements. From the closest point of the carrier to the back of the vehicle measures 1 1/4 inches and this carrier will add an additional 20 3/4 inches of overall length to the vehicle. Here at the back of the carrier our ground clearance is 12 1/4 inches and the exhaust on this vehicle does exit both the passenger side as well as the driver side here at the rear bumper. more


Watch Video

Curt 17x46 Hitch Cargo Carrier Review - 2014 Ford Escape- Video

Curt 17x46 Hitch Cargo Carrier Review - 2014 Ford Escape

Today on our 2014 Ford Escape, we are going to do a test fit on the 17 by 46 Curt Cargo Carrier. Theyve designed this for use with an inch and a quarter or two inch hitches. Part number on it is C18145. Now when used in the two inch hitch, this carrier is going to offer us up to a 500 pound weight capacity. With the hitch we are using today which a class 2, we are limited to carrying 350 pounds, just keep that in mind. To begin our test fit, we are going to slide the shank of the carrier into the receiver tube of our hitch. We need to slide it far enough so that our threaded hole will line up with our hitch pin hole. more


Watch Video

Curt Hitch Cargo Carrier Review - 2013 Ford Escape- Video

Curt Hitch Cargo Carrier Review - 2013 Ford Escape

Today on our 2013 Ford Escape well be test fitting the Curt 20 by 48 cargo carrier for inch and a quarter and two inch hitches, part number C18145. Well slide the cargo carrier shank into the hitch, line up the hitch pin hole and install and tighten down our anti-rattle bolt. With the bolt tight, our cargo carrier is secured to the vehicle. Well now go ahead and give you a few measurements. From the closest part of the carrier to the back of the vehicle measures two inches, and the cargo carrier will add an additional 21 inches of overall length to the vehicle. Our ground clearance here at the back of the carrier measures 11 inches, and the exhaust on this vehicle does exit both the passenger as well as the drivers side here at the rear bumper. more


Watch Video

Curt 17x46 Hitch Cargo Carrier Review - 2008 Ford Escape- Video

Curt 17x46 Hitch Cargo Carrier Review - 2008 Ford Escape

Today on our 2008 Ford Escape, we're going to do a test fit on the 17X46 Curt cargo carrier. They've designed this so it can easily be used with 1 1/4 or 2-inch hitches. It has a 500-pound weight capacity to it. The part number on it is C18145. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of our hitch. We'll then line up our threaded hole with our hitch pinhole. more


Watch Video

Curt Hitch Cargo Carrier Review - 2014 Ford Expedition- Video

Curt Hitch Cargo Carrier Review - 2014 Ford Expedition

Today on our 2014 Ford Expedition, we'll be test fitting the 17x46 Curt Cargo Carrier for 1 1/4 and 2 inch hitches with a 500 pound weight capacity. It's part number is C18145. To begin our test fit we'll slide the shank of the carrier into the receiver tube of our hitch, line up our pin holes, thread in our anti rattle bolt and tighten it down with a wrench. As you can see we have about 18 inches of ground clearance here at the rear of the rack. The closest point of the rack to the back of the Expedition is about 3 3/4 of an inch and overall we've added about 23 1/2 inches to the length of the Expedition. When opening our rear hatch, it breaks over our carrier at about the 13 inch mark. more


Watch Video

  1     2     3